[App]Flash Player 11.0 for ARM6 Processors - HTC ChaCha

Here you go....
Flash Player 11.0 for ARM6 devices like the HTC ChaCha.
I tried it already, and yes, it's working...

shows 10.1 on Adobe's page.
http://www.adobe.com/software/flash/about/

DearestLeader said:
shows 10.1 on Adobe's page.
http://www.adobe.com/software/flash/about/
Click to expand...
Click to collapse
you are right...
10.1.102.64....hmmm damn it
Update...
i tested the Website with the 10.2 version and i also shows only 10.1.102.64
So i am thinking 11.x is real, but Adobe misinterprets it on their website

Adobe Flash for ChaCha thread
I started this for general Adobe Flash on ChaCha installation issues. The first reply was quite helpful - for 10.1.
http://forum.xda-developers.com/showthread.php?t=1344173

I've got Adobe Flash Player 10.2 working on my HTC ChaCha, I've done a tutorial on how to do it!
http://forum.xda-developers.com/showthread.php?t=1475575
Hope this helps

Thanks for this!
I really needed this, i was trying to decide between galaxy mini and galaxy y, the only problem with the galaxy y was no flash support! Thanks, this might help me!

schölli said:
Flash Player 11.0 for ARM6 devices like the HTC ChaCha.
I tried it already, and yes, it's working...
Click to expand...
Click to collapse
Did you try this with the Stock ROM? Did it work there?
I did not get Flash Player working on the stock version, but it will work with SuperOSR! So if that version works with the Stock ROM it will still be a big help no mather which version it is.
Grüße nach Wien

Awesome!
Fantastic!!! Works perfectly on Optimus V running IHO froyo rom.
Thank you very much!!!

thanks

I'm searching for this. thanks!:good:

Any way to adjust settings?
https://settings.adobe.com/flashplayer/mobile/ does not display properly in Dolphin ...
Cannot make adjustments, except in embedded YouTube videos. At first, video was very laggy, but after changing to 240p the frame rate was much better. Since the ChaCha is such a low end device (mostly in RAM and internal memory) this is to be expected. I would imagine the same would be true for HTML5, like in U-Stream app. High res video, or even 480p, is too much for it to handle properly. If I can set the Adobe Flash 11 modified for Arm6 to the lowest resolution by default, other web page videos should start to have a decent frame rate too.

thx
cool. thanks !

I'm searching for this. thanks! any update news?

Related

Adobe Flash Player for Viewsonic G-Tablet

Hello Friends,
I just bought new Veiwsonic G-Tablet. The main reason I bought a tablet was to watch videos on it. But I was very disappointed to know that I cannot run any youtube video on it as their is no flash player installed on it. I search on web to get flash player, but could not find it. This tablet even don't have access to Andriod Market. That is my another problem.
Do any knows where I can find Adobe Flash player for my Tablet?
Thanks in advance.
Rohan
Better to find market There's a Viewsonic forum on modaco (not an ad)
Sent from my HTC Desire using XDA App
can you send me link to that forum? When I checked I could see only forums for Viewsone Viewpad. I am looking for Viewsonic Gtablet. Thanks
Recently release GLES optimized Flash for GTablet
Here's a link for the new flash GLES optimized
http://forum.xda-developers.com/showpost.php?p=9476506&postcount=26
You really should checkout the forums for the GTablet there's a lot of good info:
http://forum.xda-developers.com/forumdisplay.php?f=841
Hey that works. Thank u
for some reason it doesnt work for me, maybe I didnt install it right? :/
Vegan Gingerbread and Flash!
Running Gingerbread here with. My GTablet and the only way is to install version 10.2
Link is here
(Google for): flash 10-2-link-here
Forgot to say: Dammm my GT is running fast!!!!

Hq youtube video

Hey guys
Actually I have question about youtube HQ video when I play video it doesn't work very well a lot of lags, is this tetra 2 power. Anyway to fix that. I'm using stock UI
beepoo83 said:
Hey guys
Actually I have question about youtube HQ video when I play video it doesn't work very well a lot of lags, is this tetra 2 power. Anyway to fix that. I'm using stock UI
Click to expand...
Click to collapse
By stock UI, I assume you mean you're running the stock Tap N Tap ROM. YouTube slowness was an issue with all the early ROMs, but was fixed by the driver update pack that's since been integrated into TNT Lite, ZPad and Vegan ROMs, but not released by Viewsonic or Tap N Tap in an official build yet.
So basically, you'll have to install one of the ROMs from the development forum. No problems with smooth YouTube playback on current versions of TNT Lite, ZPad or Vegan ROMs. There's a nice GUIDE thread over in the development forum to talk you through installing Clockwork Mod and TNT Lite.
rcgabriel said:
By stock UI, I assume you mean you're running the stock Tap N Tap ROM. YouTube slowness was an issue with all the early ROMs, but was fixed by the driver update pack that's since been integrated into TNT Lite, ZPad and Vegan ROMs, but not released by Viewsonic or Tap N Tap in an official build yet.
So basically, you'll have to install one of the ROMs from the development forum. No problems with smooth YouTube playback on current versions of TNT Lite, ZPad or Vegan ROMs. There's a nice GUIDE thread over in the development forum to talk you through installing Clockwork Mod and TNT Lite.
Click to expand...
Click to collapse
Thanks dude.
I prefer to wait till the new update on Dec 19 I just wanna see if there is major improvement after installing that update. so is there anyway to get youtube works with stock UI like setting or tweak?
beepoo83 said:
Thanks dude.
I prefer to wait till the new update on Dec 19 I just wanna see if there is major improvement after installing that update. so is there anyway to get youtube works with stock UI like setting or tweak?
Click to expand...
Click to collapse
Upgrade the ROM. You will be so happy you did. It is an entirely different machine once it is upgraded.

[Q] Has any one noticed this???????

Flash player is not working with galaxy sl i9003???????
I cant understand why has it stopped working, has anyone of u a solution for this?????????
what ROM did you flash?
It's doesn't work with Jelly Bean, so if you are in CM10 ...
Buddy use
From jelly bean adobe had stopped support for jell bean. so no flash player for jb. use ics version in jb try to search in xda you will find tutorial. or use browser with inbuilt flash support like dolphin browser.
confused
Hetalk said:
what ROM did you flash?
Click to expand...
Click to collapse
I am on ddlf2 GB......... previously it was working but i dont know why it has stopped suddenly... i m really really confused about this because adobe did not mention anything like this for android version 2.3 as it was only for android 4.x
ishan.cool8 said:
I am on ddlf2 GB......... previously it was working but i dont know why it has stopped suddenly... i m really really confused about this because adobe did not mention anything like this for android version 2.3 as it was only for android 4.x
Click to expand...
Click to collapse
i think flash player's development has been stopped for android (and even for apple) because it has an issue that it is a closed system which contradicts android's open system. but for some gb roms i think it still works.
flash player
imboy25 said:
i think flash player's development has been stopped for android (and even for apple) because it has an issue that it is a closed system which contradicts android's open system. but for some gb roms i think it still works.
Click to expand...
Click to collapse
I think the same, over gb i didn had any flash player problem, maybe just one or two times, but the apllication restarts and everything was solved by itself.
best thing you can do is flash your phone, root it and start testing different roms, there are lot of roms, ics, jb or even gb. samsung wont go further than gb for our phone so start thinking to change the operatim system, etc etc.
dont worry, its easy and there is a lot of info here in xda, and a lot of people that got their problems and questions solved here.
hope this help, bye
Thnx
kralin said:
I think the same, over gb i didn had any flash player problem, maybe just one or two times, but the apllication restarts and everything was solved by itself.
best thing you can do is flash your phone, root it and start testing different roms, there are lot of roms, ics, jb or even gb. samsung wont go further than gb for our phone so start thinking to change the operatim system, etc etc.
dont worry, its easy and there is a lot of info here in xda, and a lot of people that got their problems and questions solved here.
hope this help, bye
Click to expand...
Click to collapse
Ok then.... Can u give any good GB roms link for galaxy sl??????

Touch Screen and Camera are not working after flashing CM10 4.1.1

Hey Guys!!! I have flashed my Allwinner A10 Tablet from ICS 4.0.4 to 4.1.1 Jelly Bean ( latest realese by Christian Troy). But there is a big problem that touch screen is not working. Only I can use power and home button. Any idea?
Btw my tablet is Piranha Business Tab 10.1 but it says that Nexus 7 : D
I have tried all of them but got the same problem '' Touch Screen is not working ''
-cm9_nightly_20120913
-cm10_a10_20120902
-cm10_a10_20120913
I think you forgot to flash the compatibility fix zip, I am not really sure what tablet you have but if it is any of the ones listed on this thread below, just start over, make sure to flash cm, gapps and then the compatibility zip and everything will be fine.
http://forum.xda-developers.com/showthread.php?t=1821398
Just an advise, next time help us to help you, your thread title should reflect a general idea of your issue; also try to search the forums or google it, if I was able to find it, I sure you would be able too.
JakeOcn said:
I think you forgot to flash the compatibility fix zip, I am not really sure what tablet you have but if it is any of the ones listed on this thread below, just start over, make sure to flash cm, gapps and then the compatibility zip and everything will be fine.
http://forum.xda-developers.com/showthread.php?t=1821398
Just an advise, next time help us to help you, your thread title should reflect a general idea of your issue; also try to search the forums or google it, if I was able to find it, I sure you would be able too.
Click to expand...
Click to collapse
Sorry for the fault about the thread title!!
I havent seen my tablet at the list of Supported tablets. That's why i am not sure which compatibility zip that i need to use. i will try to find it random. I hope i can find it Thanks!!
I have used compatibility zip both '' Ainol Novo7 Elf compatibility and Eken T10 with mxc622x g-sensor '' but tablet doesnt get started.
I think my tablet is not a common model
Piranha Business Tab 10.1
1.4 GHz Cortex AllWinner A10 Cortex A8
16 GB Memory
10.1 inch
1 GB DDR3 RAM
HDMI 1080P
ARM Mali [email protected] 350Mhz 3D
Piranha Business Tab 10.1 already have option (from their website) for android 4.1 and you want cm10... don't understand?
mangkon64 said:
Piranha Business Tab 10.1 already have option (from their website) for android 4.1 and you want cm10... don't understand?
Click to expand...
Click to collapse
I have flashed 4.1 from their website but it's not stable ... I mean youtube doesnt work, fruit ninja, chrome, firefox, clockworkmod manager, google play shows only 70 apps for free popular apss for that tablet but i am pretty sure there is 500 apps on google play for free. sometimes launcher is not working well. chrome,firefox fruit ninja etc apps tablet says that ''those apps doesnt supported by that tablet '' ... and wi-fi has some problem, even next to router , tablet says that connection is so bad ... I can count so many problems ... I am trying to flash CyanogenMod 10 4.1.1 because it's totaly perfect. it has not kind of problems which i have mentioned before in this post.
Only problem is camera and touch screen don't work. but i can use it by plugging usb mause and it works fine. i hope you understand my problem ... Thanks!
I had the same prob I just restarted it and it worked!
Streetryders_2000 said:
I had the same prob I just restarted it and it worked!
Click to expand...
Click to collapse
How did you make it? Actually i dont know which compability zip i need to use, i have tried it randomom but no!!! İ dont know there is compability zip for my tablet Piranha Business Tab 10.1
SmiLeToLife said:
Sorry for the fault about the thread title!!
Click to expand...
Click to collapse
Please go to advance edition an modify the title of the thread.
poyensa said:
Please go to advance edition an modify the title of the thread.
Click to expand...
Click to collapse
Done ... sorry. Thanks!!
any solution?
Hey guys, any solution for this problem, please help us piranhazedes :'(
SmiLeToLife said:
Done ... sorry. Thanks!!
Click to expand...
Click to collapse

[Q] stock note and xmbc with navi-x .icefilms

hi all have a unrooted note 10.1 running 4.4.2-
downloaded xbmc ,and seems to be running ,but can't seem to get navi-x or icefilms to work tries to install in system/addons /install from zip file
comes up with dependences not met any ideas ?
cheers in advance
ok i did a quick GOOGLE SEARCH.. This is a KNOWN ISSUE With lots of information about a work around . Navix says they are working on this... Others have posted work a rounds.
bam27beer said:
hi all have a unrooted note 10.1 running 4.4.2-
downloaded xbmc ,and seems to be running ,but can't seem to get navi-x or icefilms to work tries to install in system/addons /install from zip file
comes up with dependences not met any ideas ?
cheers in advance
Click to expand...
Click to collapse
Not sure about the navi x add-on. But go back to xbmc.org where you got it from. Look for Dependencies. Sometimes a Similar add on will help get those installed. Also is this a Stable release of xbmc. Sometimes the nightly s break things. Just like in Android and Cm

Categories

Resources