[Q] Galaxy gt-I9003 OS got crashed - Samsung Galaxy SL i9003

Hi All,
I have galaxy gt-I9003, Yesterday i have updated the os using Kies. But suddenly the process got terminated. After that i couldn't able to boot my phone. If I turn on the device, it shows the logo only.
How do I re-install the OS?
Here are my details;
Firmware : 2.3.5
Baseband : I9003DDKP3
Build no :GINGERBREAD.XWKPG
And I am from India.
Thanks in advance.

Try to get into Download Mode.
While your phone is off hold Vol-Down + Home. Then press the Power Button until the phone's screen lights up with this screen:
http://2.bp.blogspot.com/-sYkRzL8vNfY/TWjcwey6gCI/AAAAAAAAARY/WiN7_4ZxEUg/s400/download_mode.jpg
If you are able to do so, flash the last complete firmware. (pit-file, bootloader, pda, phone modem, csc)
Sorry but I only know XXKPE for European ROM's

Taraen said:
Try to get into Download Mode.
While your phone is off hold Vol-Down + Home. Then press the Power Button until the phone's screen lights up with this screen:
http://2.bp.blogspot.com/-sYkRzL8vNfY/TWjcwey6gCI/AAAAAAAAARY/WiN7_4ZxEUg/s400/download_mode.jpg
If you are able to do so, flash the last complete firmware. (pit-file, bootloader, pda, phone modem, csc)
Sorry but I only know XXKPE for European ROM's
Click to expand...
Click to collapse
^^^ do this via odin, available in the how to flash fw thread ^^^

Not booting
Hi,
Thanks for the comments.
I just followed the http://forum.xda-developers.com/showthread.php?t=1004622
1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery
i followed the steps from 1 to 7
for step 8, i select the PDA :: I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar file
Then I press the "start" button. Then I got the "PASS" message.
But when turn on the phone, its showing the logo and the samsung text blinking then restarting itself again and again.... not able to boot/load.
Any Help / advice please. Im just a newbie.
And where do I get MODEM_I9003xxxxx_REV_00_CL889972.tar.md5,GT-I9003-CSC-xxxxxx.tar.md5 files for step 9 & 10.
Thanks in advance.

shahuls said:
Hi,
Thanks for the comments.
I just followed the http://forum.xda-developers.com/showthread.php?t=1004622
1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery
i followed the steps from 1 to 7
for step 8, i select the PDA :: I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar file
Then I press the "start" button. Then I got the "PASS" message.
But when turn on the phone, its showing the logo and the samsung text blinking then restarting itself again and again.... not able to boot/load.
Any Help / advice please. Im just a newbie.
And where do I get MODEM_I9003xxxxx_REV_00_CL889972.tar.md5,GT-I9003-CSC-xxxxxx.tar.md5 files for step 9 & 10.
Thanks in advance.
Click to expand...
Click to collapse
Which was your previous firmware?
was it ext4 converted?
if it was then you'll have to flash universal cf-root or UC kernel.
n u'll find those missing files in XXKPE fw.

Hi exctngdude,
Sorry, I have no idea abt ext4,flash universal cf-root or UC kernel. I am just a newbie.
Here are my details had in the phone;
Firmware : 2.3.5
Baseband : I9003DDKP3
Build no :GINGERBREAD.XWKPG
Is there any other procedures which I have to follow? please advice me. Thanks in advance.

shahuls said:
Hi exctngdude,
Sorry, I have no idea abt ext4,flash universal cf-root or UC kernel. I am just a newbie.
Here are my details had in the phone;
Firmware : 2.3.5
Baseband : I9003DDKP3
Build no :GINGERBREAD.XWKPG
Is there any other procedures which I have to follow? please advice me. Thanks in advance.
Click to expand...
Click to collapse
since u had selected re-partition, its best that u download XXKPE and follow the guide.
mediafire link: http://www.mediafire.com/?thypvvmu1xp1rhp
ull find those missing files in above link.
after flashing post again if u want UC kernel n stuff

Hi exctngdude,
I did flash again with you mediafire link files... Its a great success. My phone is working properly. Thanks a lot . Can I update using Kies if there is any update?
Is there any other things to do in the phone? And camera is not working , other things seems to be ok.
Thanks a lot for your great help in time

shahuls said:
Hi exctngdude,
I did flash again with you mediafire link files... Its a great success. My phone is working properly. Thanks a lot . Can I update using Kies if there is any update?
Is there any other things to do in the phone? And camera is not working , other things seems to be ok.
Thanks a lot for your great help in time
Click to expand...
Click to collapse
camera is not working?
try flashing again, only the pda of ur current fw.
and from which country r u? dont think its russia. kies will show updates meant for russian region, guessing ur on XXKP*.
no need to worry though. if ur regular on xda then ull find out about any fw releases meant for any part of the world

exctngdude said:
camera is not working?
try flashing again, only the pda of ur current fw.
and from which country r u? dont think its russia. kies will show updates meant for russian region, guessing ur on XXKP*.
no need to worry though. if ur regular on xda then ull find out about any fw releases meant for any part of the world
Click to expand...
Click to collapse
I am from India, I did flash only the pda.. Now the camera is good..
I had GINGERBREAD.XWKPG, now XXKPE. Im checking other phone features..
Thanks a lot.

shahuls said:
I am from India, I did flash only the pda.. Now the camera is good..
I had GINGERBREAD.XWKPG, now XXKPE. Im checking other phone features..
Thanks a lot.
Click to expand...
Click to collapse
XXKPE is a buggy version.
I would recommend you to use XXKPQ version. It's the latest and has the most development support.
Sent from my GT-I9003 using xda premium

exctngdude said:
XXKPE is a buggy version.
I would recommend you to use XXKPQ version. It's the latest and has the most development support.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Can u please tell me where can I download XXKPQ and the necessary files?
Thanks.

shahuls said:
Can u please tell me where can I download XXKPQ and the necessary files?
Thanks.
Click to expand...
Click to collapse
go to the stock firmware thread

shahuls said:
Can u please tell me where can I download XXKPQ and the necessary files?
Thanks.
Click to expand...
Click to collapse
search in the development thread for XXKPQ.
ull find the links on the first page of the thread

Hi,
After flashing, the Kies recognize my phone, but it is not showing the firmware version.
What I have to do now?
Thanks in advance.

Hi,
I just found "I9003DDKP2" indian version ( from sammobile.com) . Can I go with this update?
What are all the steps I have to follow?
Thanks in advance.

shahuls said:
Hi,
I just found "I9003DDKP2" indian version ( from sammobile.com) . Can I go with this update?
What are all the steps I have to follow?
Thanks in advance.
Click to expand...
Click to collapse
Now in which firmware are you using...?
Enter the device into download mode and open odin and connect the phone to pc.
Select the downloaded .tar file in pda field of odin with re-partition unchecked and flash it....
You have done..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5

sirilpta said:
Now in which firmware are you using...?
Enter the device into download mode and open odin and connect the phone to pc.
Select the downloaded .tar file in pda field of odin with re-partition unchecked and flash it....
You have done..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
Hi sirilpta,
Now i am in I9003XXKPE, from India
Can I update directly from XXKPE to I9003DDKP2?
Thanks in advance.

shahuls said:
Hi sirilpta,
Now i am in I9003XXKPE, from India
Can I update directly from XXKPE to I9003DDKP2?
Thanks in advance.
Click to expand...
Click to collapse
Ya you can directly flash ddkp2 over it... After that do a factory reset and wipe cache
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5

sirilpta said:
Ya you can directly flash ddkp2 over it... After that do a factory reset and wipe cache
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
Hi sirilpta,
Can u tell me what is the latest version for india?

Related

[Q] i need help samsung galaxy s GT I9003

hello, i really need some help i just bought a samsung galaxy GT 19003 with froyo
PDA: I9003XWKB1
PHONE:I9003XXKB1
CSC:I9003ITVKB1
i want to upgrade to GINGERBREAD,kies dosn't see any update i need help plz thx
that is easy.. all you have to do is download the update file the file is
http://hotfile.com/dl/125246801/36c9b39/I9003XXKPE.rar.html
after the file downloads extract it using win rar or any other software. the password of the file is " samfirmware.com "
this is the 2.3.4 gingerbread files.
next you will have to download Odin
http://hotfile.com/dl/109276666/f22355e/SAMSUNG_USB.rar.html
this odin may also have a password. if there is a password the password is also samfirmware.com
after you download ODIN you put your phone in the download mode
vol down + home + power button
after doing this you will get a yellow screen saying downloading
start Odin and plug your phone to the computer.
you will see a yellow block light up...
click on "PIT" and select the file which has latona.
and click on start..
after it is done click reset.
unplug your phone and remove the battery. then put the phone back in the download mode and plug it to the computer..
click "PDA" and select the file which has CODE somewhere in the name.
click "PHONE" and select the file which has MODEM somewhere in the name.
click on "CSC" and select the file which has CSC some where in the name.
now click on START and wait for it to finish!
when the green box comes unplug your phone from the computer and do a master reset..
and then you are done... your phone is now android 2.3.4 Gingerbread.
if there is any problem then you flash your phone by following the above steps.. and i suggest you make a backup on your samsung kies as well as on your external sd..
CLICK ON THE THANKS BUTTON!!
Samsung galaxy scl gt i9003 gingerbread 2.3.5 ddkp3
Hi Junior member,
Thanks for posting such a nice procedure to upgrade the phone. Could you please help me in upgrading my SAMSUNG GALAXY SCL GT I9003 GINGERBREAD 2.3.5 DDKP3 to android 4.04 ICS?
I do not know the right procedure to upgrade my phone. I have rooted my phone using odin once.
Thanks in advance for the help

[Q] My Samsung GSL dead help me pls!!!

After wrong root my SSGSL my phone still dead can not do anything with black screen( can not turn on my phone) and can not launch to Download Mode it seems no respond of any bottoms when i press it !!
As i thought my phone is Samsung GS1 (I9000)so i download the wrong one to root it !
but in fact my phone is Samsung GSL I9003 !! so unfortunely me !!
Does anyone know how to fix it pls ?
and do you know how to root my Samsung GSL I9003 !!
Thank You
hi
i am facing the same problem just try xxkb3 fw flash it with odin try this
thank you
praveenpravi47 said:
i am facing the same problem just try xxkb3 fw flash it with odin try this
Click to expand...
Click to collapse
Thanks for your information !
but my phone can not press any bottoms volum down+home+shutdown
it's doesn't work my friend !! so i can not access to download mode
and then how to flash new ROM with odin ?
Can i just plug my phone in via USB and try to flash it with odin ?
Coz my phone doen't show anything at the display !!
And anyone know where can i see how to root my SSGSL I9003 ?
Thank you !!
i think you can't flash if dowload mode doesn't work, but try it anyway. However you need some comunication between the phone and the pc.
You got an FW issue and want to root? You would need also communication between phone and PC. If u r lucky, use the SuperOneClick or the cf-root.
I believe that would be better for you to go to the Technical Service.
i want to try
Uan_ar said:
i think you can't flash if dowload mode doesn't work, but try it anyway. However you need some comunication between the phone and the pc.
You got an FW issue and want to root? You would need also communication between phone and PC. If u r lucky, use the SuperOneClick or the cf-root.
I believe that would be better for you to go to the Technical Service.
Click to expand...
Click to collapse
thank you ....i want to try cf-root !! i want to root it again even it doen't work.
Do you know how to do it ? i mean step by step ...any web link ?
and where to download CF-root file ?
Thanks
Did you try reading the FAQ? search the modding section also. There you have the instructions.
However, you would need to enter download mode (to cf-root with ODIN).
http://forum.xda-developers.com/showthread.php?t=1252709
http://forum.xda-developers.com/showthread.php?t=1174085
http://forum.xda-developers.com/showthread.php?t=1327201
http://forum.xda-developers.com/showthread.php?t=1351056
http://forum.xda-developers.com/showthread.php?t=1004622
http://forum.xda-developers.com/showthread.php?t=987169
sitbkkthailand said:
After wrong root my SSGSL my phone still dead can not do anything with black screen( can not turn on my phone) and can not launch to Download Mode it seems no respond of any bottoms when i press it !!
As i thought my phone is Samsung GS1 (I9000)so i download the wrong one to root it !
but in fact my phone is Samsung GSL I9003 !! so unfortunely me !!
Does anyone know how to fix it pls ?
and do you know how to root my Samsung GSL I9003 !!
Thank You
Click to expand...
Click to collapse
If u cant acsses to the downloading mod and recovery mod you have to try the usb iug method u can see vidios about this on youtube

[Q] Pls hept me i break my samsung galaxy sl i9003

i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps
add me on messenger sp8ky1 , maybe i could explain(in romanian)
umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..
aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....
Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?
Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310
Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.
Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.

Samsung S6 920F- Stuck At Bootloop After Update With Odin

Samsung S6 920F Stuck Boot loop!! PLS HELP
Hello :crying:
If someone can help me pls do it!! :crying::crying::crying:
I have tried to update my samsung S6 G920F model , ll looked ok , after odin rebooted my phone, and since then it is stuck on samsung logo
i can access to download mode , if i soft reset the phone (volume down+power)
tried to re-flesh again with no luck!!
I try Volum Up + Power + home button and none recovery menu
Pls help me
Try to use "Smart Switch" and click on the top right of the windows "more" and try an "Emergency software recovery and initialisation".
There is a guide inside the software who explain everything.
Since you can not go into recovery will not help
Wich firmware you tried to flash and what was the status of your phone before (root, custom rom, stock rom etc..) ?
Svan987 said:
Try to use "Smart Switch" and click on the top right of the windows "more" and try an "Emergency software recovery and initialisation".
There is a guide inside the software who explain everything.
Since you can not go into recovery will not help
Wich firmware you tried to flash and what was the status of your phone before (root, custom rom, stock rom etc..) ?
Click to expand...
Click to collapse
I use before a stock rom 5.1.1 root was stock too
In Smart Switch on Emergency software recovery i cant see my phone
Now i just intall:
Root: S6-UniBase_BOG8_v2
Firmware: G920FXXU2BOG8_G920FOXX2BOG9_G920FXXU2BOGE_HOME.tar.md5 - this is the last oficial firmware on sammobile.com
And same screen: Samsung galaxy s6 powered by Android!
Still i cant acces the recovery menu: Volum Up + home + power
alb3rto2005 said:
I use before a stock rom 5.1.1 root was stock too
In Smart Switch on Emergency software recovery i cant see my phone
Now i just intall:
Root: S6-UniBase_BOG8_v2
Firmware: G920FXXU2BOG8_G920FOXX2BOG9_G920FXXU2BOGE_HOME.tar.md5 - this is the last oficial firmware on sammobile.com
And same screen: Samsung galaxy s6 powered by Android!
Still i cant acces the recovery menu: Volum Up + home + power
Click to expand...
Click to collapse
After opening smart switch, click more > Emergency firmware recovery > device initialization > Key in your phone Model (SM-G920F) > then key in your device serial number then it will download the latest update for your phone. remember to put it into download mode.
zincsnow said:
After opening smart switch, click more > Emergency firmware recovery > device initialization > Key in your phone Model (SM-G920F) > then key in your device serial number then it will download the latest update for your phone. remember to put it into download mode.
Click to expand...
Click to collapse
OK OK, Now i start!
alb3rto2005 said:
OK OK, Now i start!
Click to expand...
Click to collapse
All the best! i hope it does work, i was worried as hell too when my phone couldn't start.
alb3rto2005 said:
OK OK, Now i start!
Click to expand...
Click to collapse
I just do that and:
Smart Switch recognize my phone, download and install the firmware but same problem, Stuck on first screen: SAMSUNG Galaxy S6 Powered by Android :crying::crying::crying:
alb3rto2005 said:
I just do that and:
Smart Switch recognize my phone, download and install the firmware but same problem, Stuck on first screen: SAMSUNG Galaxy S6 Powered by Android :crying::crying::crying:
Click to expand...
Click to collapse
After completing the steps, how long was it stuck on Samsung Galaxy S6 powered by android screen?
zincsnow said:
After completing the steps, how long was it stuck on Samsung Galaxy S6 powered by android screen?
Click to expand...
Click to collapse
10-15 minutes.... i let him... and nothing!
And still i cant access the (Power up + home + power) recovery menu ...
alb3rto2005 said:
10-15 minutes.... i let him... and nothing!
Click to expand...
Click to collapse
May i know exactly what did you do before this? were you coming from root > stock or stock > root?
zincsnow said:
May i know exactly what did you do before this? were you coming from root > stock or stock > root?
Click to expand...
Click to collapse
I was root and firmware 5.1.1 stock bouth, first update, because i have 2 updates for the 5.1.1 official on sammobile.com/firmware.
but a friend try to upgrade the soft with odin and he put the ap file in bl and click start ....i know he make a big mistake.... after that i just have the download mode avaible.... But i`m stuck here... and my phone in first screen
alb3rto2005 said:
I was root and firmware 5.1.1 stock bouth, first update, because i have 2 updates for the 5.1.1 official on sammobile.com/firmware.
but a friend try to upgrade the soft with odin and he put the ap file in bl and click start ....i know he make a big mistake.... after that i just have the download mode avaible.... But i`m stuck here... and my phone in first screen
Click to expand...
Click to collapse
i think this MAY help you.
Download Bootloader here and put in BL
Download Modem here and put in CP
After flashing these two in download mode, connect your phone to the PC and smart switch again, and use emergency recovery. I really HOPE this will fix your problem.
alb3rto2005 said:
I was root and firmware 5.1.1 stock bouth, first update, because i have 2 updates for the 5.1.1 official on sammobile.com/firmware.
but a friend try to upgrade the soft with odin and he put the ap file in bl and click start ....i know he make a big mistake.... after that i just have the download mode avaible.... But i`m stuck here... and my phone in first screen
Click to expand...
Click to collapse
did it work for you?
zincsnow said:
did it work for you?
Click to expand...
Click to collapse
Now i will try! Let`s see!
alb3rto2005 said:
Now i will try! Let`s see!
Click to expand...
Click to collapse
Good luck! it should work now
zincsnow said:
Good luck! it should work now
Click to expand...
Click to collapse
Nothig, same loop, same problem, none samsung logo start :crying::crying::crying:
alb3rto2005 said:
Nothig, same loop, same problem, none samsung logo start :crying::crying::crying:
Click to expand...
Click to collapse
I think i need a Samsung S6 32 GB - neverlock - .pit file
You should flash a rom with twrp..
download the twrp's latest version and flash it via odin.
Buy a micro usb otg cable if you cant reach your phone from ur pc. I was like that..
then put a custom kernel + rom into the usb. then flash the kernel then rom to the device using usb-otg from install menu.
Then you should be good to go
alb3rto2005 said:
Nothig, same loop, same problem, none samsung logo start :crying::crying::crying:
Click to expand...
Click to collapse
May i suggest you bring it back to Samsung service center to get it repaired instead?
Why a usb-otg?? My official cable is ok
I have tryied with curstom kernel and firmware and no results!
I need a pit file of a samsung s6 32 gb NEVERLOCKED

Help pls!! Boot loop!! No recovery!! Samsung s6

Hello
If someone can help me pls do it!!
I have tried to update my samsung S6 G920F model , ll looked ok , after odin rebooted my phone, and since then it is stuck on samsung logo
i can access to download mode , if i soft reset the phone (volume down+power)
tried to re-flesh again with no luck!!
I try Volum Up + Power + home button and none recovery menu
Pls help me
Download the lastest firmware for your phone on Samobile and flash it with odin in download mode (in "AP") .
Check the md5 to exclude a bad download.
That the only way to fix your situation.
Add me and call me on Skype when you can! Pls
Id: alb3rto2005
alb3rto2005 said:
Add me and call me on Skype when you can! Pls
Id: alb3rto2005
Click to expand...
Click to collapse
Follow -JFK- 's instructions bro. That should solve it.
Sent from my SM-G925F using Tapatalk
None results!! Nothing new?!
Try to flash the old firmware with odin that was with your s6 before....
You could not manage to flash tje firmware via ODIN? Any errors (cause you posted none)?
I have used almost a day to fix my phone.
This thread helped me.
http://forum.xda-developers.com/galaxy-s6/help/help-softbricked-device-t3087228

Categories

Resources