Hi All,
I have galaxy gt-I9003, Yesterday i have updated the os using Kies. But suddenly the process got terminated. After that i couldn't able to boot my phone. If I turn on the device, it shows the logo only.
How do I re-install the OS?
Here are my details;
Firmware : 2.3.5
Baseband : I9003DDKP3
Build no :GINGERBREAD.XWKPG
And I am from India.
Thanks in advance.
Try to get into Download Mode.
While your phone is off hold Vol-Down + Home. Then press the Power Button until the phone's screen lights up with this screen:
http://2.bp.blogspot.com/-sYkRzL8vNfY/TWjcwey6gCI/AAAAAAAAARY/WiN7_4ZxEUg/s400/download_mode.jpg
If you are able to do so, flash the last complete firmware. (pit-file, bootloader, pda, phone modem, csc)
Sorry but I only know XXKPE for European ROM's
Taraen said:
Try to get into Download Mode.
While your phone is off hold Vol-Down + Home. Then press the Power Button until the phone's screen lights up with this screen:
http://2.bp.blogspot.com/-sYkRzL8vNfY/TWjcwey6gCI/AAAAAAAAARY/WiN7_4ZxEUg/s400/download_mode.jpg
If you are able to do so, flash the last complete firmware. (pit-file, bootloader, pda, phone modem, csc)
Sorry but I only know XXKPE for European ROM's
Click to expand...
Click to collapse
^^^ do this via odin, available in the how to flash fw thread ^^^
Not booting
Hi,
Thanks for the comments.
I just followed the http://forum.xda-developers.com/showthread.php?t=1004622
1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery
i followed the steps from 1 to 7
for step 8, i select the PDA :: I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar file
Then I press the "start" button. Then I got the "PASS" message.
But when turn on the phone, its showing the logo and the samsung text blinking then restarting itself again and again.... not able to boot/load.
Any Help / advice please. Im just a newbie.
And where do I get MODEM_I9003xxxxx_REV_00_CL889972.tar.md5,GT-I9003-CSC-xxxxxx.tar.md5 files for step 9 & 10.
Thanks in advance.
shahuls said:
Hi,
Thanks for the comments.
I just followed the http://forum.xda-developers.com/showthread.php?t=1004622
1. Download and run odin.
2. Check Re-Partition, Auto Reboot and F. Reset Time.
3. Click PIT button and select this file: latona_20110114.pit
4. Put your phone into download mode: Press Volume down + OK + Power.
5. Connect USB cable and the program will detect the phone's Com number.
6. Click Start button to download the PIT file to phone.
7. After it is Done Click on Reset button, then unselect Re-Partition box.
8. Click PDA button and select this file: I9003xxxxx-xxx...-PDA-low-CL890053.tar.md5
9. Click PHONE button and select this file: MODEM_I9003xxxxx_REV_00_CL889972.tar.md5
10. Click CSC button and select this file: GT-I9003-CSC-xxxxxx.tar.md5
11. Remove the battery, then enter Device into Download Mode again.
12. Click Start button to flash these files to phone.
13. Do not touch anything till you see PASS on the program window.
14. Just do a factory reset after flashing using recovery
i followed the steps from 1 to 7
for step 8, i select the PDA :: I9003XXKPH_I9003XXKPH_I9003SERKPH_HOME.tar file
Then I press the "start" button. Then I got the "PASS" message.
But when turn on the phone, its showing the logo and the samsung text blinking then restarting itself again and again.... not able to boot/load.
Any Help / advice please. Im just a newbie.
And where do I get MODEM_I9003xxxxx_REV_00_CL889972.tar.md5,GT-I9003-CSC-xxxxxx.tar.md5 files for step 9 & 10.
Thanks in advance.
Click to expand...
Click to collapse
Which was your previous firmware?
was it ext4 converted?
if it was then you'll have to flash universal cf-root or UC kernel.
n u'll find those missing files in XXKPE fw.
Hi exctngdude,
Sorry, I have no idea abt ext4,flash universal cf-root or UC kernel. I am just a newbie.
Here are my details had in the phone;
Firmware : 2.3.5
Baseband : I9003DDKP3
Build no :GINGERBREAD.XWKPG
Is there any other procedures which I have to follow? please advice me. Thanks in advance.
shahuls said:
Hi exctngdude,
Sorry, I have no idea abt ext4,flash universal cf-root or UC kernel. I am just a newbie.
Here are my details had in the phone;
Firmware : 2.3.5
Baseband : I9003DDKP3
Build no :GINGERBREAD.XWKPG
Is there any other procedures which I have to follow? please advice me. Thanks in advance.
Click to expand...
Click to collapse
since u had selected re-partition, its best that u download XXKPE and follow the guide.
mediafire link: http://www.mediafire.com/?thypvvmu1xp1rhp
ull find those missing files in above link.
after flashing post again if u want UC kernel n stuff
Hi exctngdude,
I did flash again with you mediafire link files... Its a great success. My phone is working properly. Thanks a lot . Can I update using Kies if there is any update?
Is there any other things to do in the phone? And camera is not working , other things seems to be ok.
Thanks a lot for your great help in time
shahuls said:
Hi exctngdude,
I did flash again with you mediafire link files... Its a great success. My phone is working properly. Thanks a lot . Can I update using Kies if there is any update?
Is there any other things to do in the phone? And camera is not working , other things seems to be ok.
Thanks a lot for your great help in time
Click to expand...
Click to collapse
camera is not working?
try flashing again, only the pda of ur current fw.
and from which country r u? dont think its russia. kies will show updates meant for russian region, guessing ur on XXKP*.
no need to worry though. if ur regular on xda then ull find out about any fw releases meant for any part of the world
exctngdude said:
camera is not working?
try flashing again, only the pda of ur current fw.
and from which country r u? dont think its russia. kies will show updates meant for russian region, guessing ur on XXKP*.
no need to worry though. if ur regular on xda then ull find out about any fw releases meant for any part of the world
Click to expand...
Click to collapse
I am from India, I did flash only the pda.. Now the camera is good..
I had GINGERBREAD.XWKPG, now XXKPE. Im checking other phone features..
Thanks a lot.
shahuls said:
I am from India, I did flash only the pda.. Now the camera is good..
I had GINGERBREAD.XWKPG, now XXKPE. Im checking other phone features..
Thanks a lot.
Click to expand...
Click to collapse
XXKPE is a buggy version.
I would recommend you to use XXKPQ version. It's the latest and has the most development support.
Sent from my GT-I9003 using xda premium
exctngdude said:
XXKPE is a buggy version.
I would recommend you to use XXKPQ version. It's the latest and has the most development support.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Can u please tell me where can I download XXKPQ and the necessary files?
Thanks.
shahuls said:
Can u please tell me where can I download XXKPQ and the necessary files?
Thanks.
Click to expand...
Click to collapse
go to the stock firmware thread
shahuls said:
Can u please tell me where can I download XXKPQ and the necessary files?
Thanks.
Click to expand...
Click to collapse
search in the development thread for XXKPQ.
ull find the links on the first page of the thread
Hi,
After flashing, the Kies recognize my phone, but it is not showing the firmware version.
What I have to do now?
Thanks in advance.
Hi,
I just found "I9003DDKP2" indian version ( from sammobile.com) . Can I go with this update?
What are all the steps I have to follow?
Thanks in advance.
shahuls said:
Hi,
I just found "I9003DDKP2" indian version ( from sammobile.com) . Can I go with this update?
What are all the steps I have to follow?
Thanks in advance.
Click to expand...
Click to collapse
Now in which firmware are you using...?
Enter the device into download mode and open odin and connect the phone to pc.
Select the downloaded .tar file in pda field of odin with re-partition unchecked and flash it....
You have done..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
sirilpta said:
Now in which firmware are you using...?
Enter the device into download mode and open odin and connect the phone to pc.
Select the downloaded .tar file in pda field of odin with re-partition unchecked and flash it....
You have done..
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
Hi sirilpta,
Now i am in I9003XXKPE, from India
Can I update directly from XXKPE to I9003DDKP2?
Thanks in advance.
shahuls said:
Hi sirilpta,
Now i am in I9003XXKPE, from India
Can I update directly from XXKPE to I9003DDKP2?
Thanks in advance.
Click to expand...
Click to collapse
Ya you can directly flash ddkp2 over it... After that do a factory reset and wipe cache
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
sirilpta said:
Ya you can directly flash ddkp2 over it... After that do a factory reset and wipe cache
please click thanks if you helped me.... ( oops sorry if i held you )
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
Hi sirilpta,
Can u tell me what is the latest version for india?
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps
add me on messenger sp8ky1 , maybe i could explain(in romanian)
umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..
aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....
Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?
Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310
Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.
Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.
Hello everybody
I have galaxy sl i9003 i...i put it on odin then i put pit file and check re-partition...after this pass...the phone turned off....then i put the phone on download mode...i want to download stock rom on it...it's just a one file..i put it on pda file the start...the process passed but the phone not start..it's stuck on resart loop....i want to restore it stock rom jpkpm...Thank you
best regards
a.m.mustafa91 said:
Hello everybody
I have galaxy sl i9003 i...i put it on odin then i put pit file and check re-partition...after this pass...the phone turned off....then i put the phone on download mode...i want to download stock rom on it...it's just a one file..i put it on pda file the start...the process passed but the phone not start..it's stuck on resart loop....i want to restore it stock rom jpkpm...Thank you
best regards
Click to expand...
Click to collapse
Hi! Since you are new here, perhaps it's the best time to check out the Forum Rules not that you've done anything wrong, but just to get you informed..
what you're experiencing is a bootloop, my friend..
i suggest you flash a stock firmware
Here's a link on how to flash a firmware http://forum.xda-developers.com/showthread.php?t=1004622
i hope this will help you
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Samsung s2 firmware upgrade error [SOLUTION]
greenland samsung said:
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Click to expand...
Click to collapse
"Nothing to worry dude ,just follow these simple steps if you are using samsung s2 i9100 international version ,just download the Siyah kernel .tar file and flash it with odin ,you can just google siyah kernel to get the latest kernel and this will remove your firmware upgrade error and you can easily go into the download mode and can further upgrade the device by download jelly bean version of your related device .THANKS
Hello everyone i belive i have hard bricked my samsung galaxy s4 as i tried to root it and stupidly did save the current rom as a backup. Guess what it went pearshape and it does not boots up all the way only to where it says 'samsung galaxy s4 1905' then turns off. I can press home,down ,and power but not home up power it used to come up with all the info but not any more. I have tried using odin but it still did not work. Maybe i did something wrong using odin but i am not sure. Thankyou in advanced for the help many thanks Mike.
:cyclops:
Download the original software on your computer as a .md5 file and use odin to flash it under the PDA button
Gonzo Mason said:
Download the original software on your computer as a .md5 file and use odin to flash it under the PDA button
Click to expand...
Click to collapse
I am pretty aure i have already done that but i will try again tommorw morning.
If i does not work have you got any other idead mate?
Cheers
hi
Please forgive me English is very bad, brush into one recovery, then brush card, it is convenient