hello, i really need some help i just bought a samsung galaxy GT 19003 with froyo
PDA: I9003XWKB1
PHONE:I9003XXKB1
CSC:I9003ITVKB1
i want to upgrade to GINGERBREAD,kies dosn't see any update i need help plz thx
that is easy.. all you have to do is download the update file the file is
http://hotfile.com/dl/125246801/36c9b39/I9003XXKPE.rar.html
after the file downloads extract it using win rar or any other software. the password of the file is " samfirmware.com "
this is the 2.3.4 gingerbread files.
next you will have to download Odin
http://hotfile.com/dl/109276666/f22355e/SAMSUNG_USB.rar.html
this odin may also have a password. if there is a password the password is also samfirmware.com
after you download ODIN you put your phone in the download mode
vol down + home + power button
after doing this you will get a yellow screen saying downloading
start Odin and plug your phone to the computer.
you will see a yellow block light up...
click on "PIT" and select the file which has latona.
and click on start..
after it is done click reset.
unplug your phone and remove the battery. then put the phone back in the download mode and plug it to the computer..
click "PDA" and select the file which has CODE somewhere in the name.
click "PHONE" and select the file which has MODEM somewhere in the name.
click on "CSC" and select the file which has CSC some where in the name.
now click on START and wait for it to finish!
when the green box comes unplug your phone from the computer and do a master reset..
and then you are done... your phone is now android 2.3.4 Gingerbread.
if there is any problem then you flash your phone by following the above steps.. and i suggest you make a backup on your samsung kies as well as on your external sd..
CLICK ON THE THANKS BUTTON!!
Samsung galaxy scl gt i9003 gingerbread 2.3.5 ddkp3
Hi Junior member,
Thanks for posting such a nice procedure to upgrade the phone. Could you please help me in upgrading my SAMSUNG GALAXY SCL GT I9003 GINGERBREAD 2.3.5 DDKP3 to android 4.04 ICS?
I do not know the right procedure to upgrade my phone. I have rooted my phone using odin once.
Thanks in advance for the help
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps
add me on messenger sp8ky1 , maybe i could explain(in romanian)
umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..
aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....
Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?
Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310
Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.
Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.
Mobile Odin pro stuck
Can some one please help me with this prob. I've flashed my phone through cwm many times and have had no problems at all but decided to flash stock firmware onto my note 2 gtn7105 late to start afresh .Having no access to a PC I decided to use mobile Odin(big mistake). After checking root access plus installing the correct flash kernal and downloading stock firmware decided to use m.o.p.after the program checked my md5 tar it asked for permissions and went on its way into ruining my pride and joy.it is stuck in blue odin man mode and cant get past the samsung note screen and ive had to remove the battery to stop it.i will not go into recovery mode but will into download .WHAT CAN I Do PLEASEnhelp .can go on pc now with odin(will never use anything else again) but too nervous to attempt anything .any ideas? Cheers
i got a s4 from my friend. he said he was doing a OTA update and the phone just cut off. now when he turns on the phone the galaxy s4 logo just keeps rebooting. i tried to root it to put cwm but it just keeps rebooting. But when i put it but odin tells me there is no pit partition.
i did further research and tried looking for the pit file of the galaxy gti9500. i found the pit file for a gti9500. the name of the file was called adonis.pit when i unzipped it. i dont know the baseband version of it to even download the factory imnage back on it. i tried everything.
can someone give me some advice please.
i tried to download a panama stock rom and insert the pit file in odin. but odin gives me this message
cant open the serial (COM) port.
please i need help in this matter
also i tried connecting the usb plug in the back of the motherboard.
is there any like universal rom that will work.
its u international factory unlocked s4.
Hello everyone i belive i have hard bricked my samsung galaxy s4 as i tried to root it and stupidly did save the current rom as a backup. Guess what it went pearshape and it does not boots up all the way only to where it says 'samsung galaxy s4 1905' then turns off. I can press home,down ,and power but not home up power it used to come up with all the info but not any more. I have tried using odin but it still did not work. Maybe i did something wrong using odin but i am not sure. Thankyou in advanced for the help many thanks Mike.
:cyclops:
Download the original software on your computer as a .md5 file and use odin to flash it under the PDA button
Gonzo Mason said:
Download the original software on your computer as a .md5 file and use odin to flash it under the PDA button
Click to expand...
Click to collapse
I am pretty aure i have already done that but i will try again tommorw morning.
If i does not work have you got any other idead mate?
Cheers
hi
Please forgive me English is very bad, brush into one recovery, then brush card, it is convenient