Database Info

[Q] Samsung Galaxy Mini doesn't run HELP !!!!

Hi.
My friend tried to install rom for Samsung Galaxy Mini. At the middle of installation the phone turned off and the phone doesn't want to run at all.
What is the problem?

My brother tried to flash his own and the phone doesn't restarts anymore.
It only does a small and quick screen flash, repeatly.
I can set it to download mode, and ODIN software connects OK, but reflahsing does not resolve the problem.
Help needed also.
PS: Sorry for my english.

I am going to check this thread http://forum.xda-developers.com/showthread.php?t=1107331 tons of information!
Maybe reflashing with other recoveries solve something.

Its a half-brick
pls go on download mod. and reinstall new firmware,

AndroidHouse Team said:
pls go on download mod. and reinstall new firmware,
Click to expand...
Click to collapse
I can't go to Download Mode. The device doesn't run at all.

You have successfully bricked your device then!
(You should better take it to service)

[Q] Pls hept me i break my samsung galaxy sl i9003

i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((

you "wanted to flash and now it's blank". that means it's blank before you tried anything which means you need to take it to the service center.
on the other hand, if you mean you tried and now it's blank, why not give us more details? what fw did you try flashing, did you lose power during flashing, etc?

Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
if you are using ODIN try this first..:
open odin on PC
>remove battery on phone
>connect usb to PC to Phone without the battery
>then put battery back
>when the light turns on immedietly press the 3button DOWNLOAD COMBO
(VOLUME DOWN+HOMEKEY+POWER BUTTON)
>If you done it right you would end up on DOWNLOAD MODE
>then learn whats next to do in flashing FIRMWARE...
*IF THE PHONE IS STILL TURNING THE POWER ON IT DOESNT MEAN ITS TOTALLY BRICK...JUST TRY THE METHOD AND MAYBE YOU WILL BE HAPPY AGAIN*

Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)

umarian said:
Man if dont work you said blaqkarma try this:http://forum.xda-developers.com/showthread.php?t=1457458(is for s2 but works for i9003)
Click to expand...
Click to collapse
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are

supergaijin said:
so you've tested it yourself and confirmed the s2 kernel, recovery files, and bootloader in the thread works on our sL? if not, don't make things worse than they already are
Click to expand...
Click to collapse
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003

Listen i have a solution for you
1. Remove battery sim card and sd card.
2. Download xxkpq rom from this link http://forum.xda-developers.com/showthread.php?t=1004647
3. Press vol. down + Home + power and while doing this insert your battery (you may need to people)
4. If the screen lights up u may see the download mode with android shovelling and below downloading do not turn off the target.
5. Select xxkpq rom as the pda source in odin
6. Connect your phone to your computer and see whether the ID COM section turns yellow. If it doesnt you do not have the drivers. Just install kies for the drivers
7. Hit start as soon as the id com section turns yellow
Or
Repeat the steps till step 2
Then while doing the download mode combination plug your usb in and see whether you get a phone pc screen if you do then the id com section will turn yellow and click start.
If none of them work take it to the service center but dont tell them u were up to flashing!
Hope it helps

add me on messenger sp8ky1 , maybe i could explain(in romanian)

umarian said:
Man I said to use method not to use S2 kernel or bootloaader from S2 use the kernel from i9003;sorry for my bad english
Its common sense to use kernel and bootloader from i9003
Click to expand...
Click to collapse
ok, gotcha. now if we could just hear from OP how this happened...

i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Mr.dundy said:
i wanted to flash for the first time my samsung galaxy sl i9003 and now my screen is blank. i have 2.3.6 xxkpq. it doest conect to the usb...it's just blank(the screen)...pls help(...i'm verry new at this things(((
Click to expand...
Click to collapse
Hav u tried this mehod.. http://forum.xda-developers.com/showthread.php?t=1411768
i think its the only last hope for u.. othwse it is bettr to visit samsung centr instead of furthr damaging ur fone..

aminsetan said:
i have same problem...try flushing kernel and rom...
now my phone black screen and vibrate..dont show anything..pls help
Sent from my MT25i
Click to expand...
Click to collapse
Do a clean flash...connect to odin, flash latona.pit, then XXKPE , then DDLF2....

Pls help me
i flashed the cm10 alpha 4,but unfortunately i decided to change it to Polj1 official firmware.and theres a problem on partition ,wnat should i do?
where can i get latona.pit?is it also on the firmware zipfile?

Just download odin 1.85 it has latona pit file inside.
Sent from my Nokia 3310

Soft bricked I9003
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Amit134 said:
Hi,
I have cynogenmod 10 on my galaxy I9003. Then i decided to go back to original firmware. Hence I flashed my phone with DDLF2_CFROOT-05-07-2012.tar .
After this i cleared cache. Now my phone is stuck in bootloop.
After that through reset button on back side of the phone, somehow i have managed to enter in Download mode and tried to change CFROOT but it is showing failed error.
tried re partition through latona_20110114.pit but now nothing is happening.
Now when i m trying to load firmware getting only <OSM> All threads completed. (succeed 0 / failed 0)
error.
Kindly help me !!!!
Click to expand...
Click to collapse
Do I need to update phone bootloader and clear EFS. IF yes how ??
Kindly suggest.

Hey mate, don't select 'update bootloader' and 'clear phone efs ' option in odin while flashing. 'Clear phone efs' will delete your phone's imei IMO.
Do clean flash. Flash XXKPE with re-partitioning and than any stock rom of your choice.
Use this guide to flash XXKPE firmware. Never flash ddlf2 rom directly coming from CM10 or any other based on CM10 rom having MTD partiotning system.

[Q] bricked gt-s5670

my galaxy fit is not booting normally or in recovery mode.it is going into download mode and ramdump mode.i have flashed it many time with the official firmware from sammobile.com after this problem but no luck.previously i had installed the cyanogen mod 10.1 rom in it.
cm-10.1-20130309-NIGHTLY-beni
"http://forum.xda-developers.com/showthread.php?t=2075503"
i got a video in youtube showing the same problem which i have for galaxy pop... " https://www.youtube.com/watch?v=VppXy6_1sAw "
i would be very thankful to anyone who can come up with a solution or help
my email id [email protected]

What error are u facing in Odin?

Galaxy_Rohit said:
What error are u facing in Odin?
Click to expand...
Click to collapse
while flashing in odin I get no erros the device flashes successfully but when the device starts after flashing the screen starts blinking neither it would go into recovery nor normally boot.....no blinking of screen in downloading mode or arm9 mode

Flash froyo first(since it is a full 4pkg firmware & contains bootloader as well). Then try flashing gingerbread & see if it succeeds. I can provide u my firmware files(ddkb1 & ddkt3) which 100% work everytime I flash 'em.
If still the problem persists then there are some other issues.

Galaxy_Rohit said:
Flash froyo first(since it is a full 4pkg firmware & contains bootloader as well). Then try flashing gingerbread & see if it succeeds. I can provide u my firmware files(ddkb1 & ddkt3) which 100% work everytime I flash 'em.
If still the problem persists then there are some other issues.
Click to expand...
Click to collapse
I have tried flashing froyo...i dont have the one package but different files.still no luck .even tried to install the clockwork mode recovery but it isnt even entering into recovery.if u can give me the download links to your file I can try flashing them.

Install this Samsung USB Driver on pc.
Note:-
*Use Odin v4.42
*Rename ops file exactly as "BENI_v1.0.ops"(without quotes)...(might b case sensitive, so be careful)
Goto download mode by keep pressing & holding Volume Down+Home+Power Buttons together until the phone turn on in "Downloading" mode.
First, flash Galaxy Fit Froyo 2.2.1(ddkb1)
Procedure:
OPS: BENI_v1.0.ops
BOOT: APBOOT......
PHONE: MODEM.....
PDA: CODE......
CSC: CSC......
Click "Start".:thumbup:
& then flash Galaxy Fit Gingerbread 2.3.6(ddkt3)
Procedure:
OPS: BENI_v1.0.ops
Tick one package in Odin & place that ".tar.md5" file under One Package field.
Click "Start".:thumbup:
Additional advice: Try another pc/laptop coz in most cases USB is the major issue
*This will work for sure*:thumbup:
However, if unfortunately none of these work for u, then give it to service center...only way left...

ok I will give it a try once again .....and do u think that there may be some other issues lyk some hardware part faliure....

If the Download Mode is stable, there's no failure on phone's side. Our Fit's hardware never failed for such circumstances.Hence, pc is the main issue.
I think that all kinds of wrongs are easily recovered if Download Mode still exists on the phone(some ppl have their phone blinking in Download Mode...which is bad).
& 1 more thing... those care takers will definitely tell u that u need to replace ur motherboard(even if its alright) which isn't a good deal IMO.

hey I tried it your way but the same problem.....i think I have to visit the customer care and see if they can hook up to something...and I thing it would be wise going for a new cell if they say to change the motherboard....and thanks for your help bro.....

goplu said:
...and I thing it would be wise going for a new cell if they say to change the motherboard....
Click to expand...
Click to collapse
Absolutely...!!!

samsung galaxy core got bricked

I have samsung galaxy core. I tried to put custom OS. Since this is my first time i dont have much knowledge about that. It was got bricked. Now My phone is not turning on:crying:. whenever i try to turn on it keeps on vibrating even it is not going into download or any mode. Please do provide the solution asap. thanks in advance

Bharan5484 said:
I have samsung galaxy core. I tried to put custom OS. Since this is my first time i dont have much knowledge about that. It was got bricked. Now My phone is not turning on:crying:. whenever i try to turn on it keeps on vibrating even it is not going into download or any mode. Please do provide the solution asap. thanks in advance
Click to expand...
Click to collapse
Bro you need to flash 3 part firmware with odin. Which galaxy core model you have? (G360H, G361 etc.)

Mr.Bola said:
Bro you need to flash 3 part firmware with odin. Which galaxy core model you have? (G360H, G361 etc.)
Click to expand...
Click to collapse
I have the same problem with my Gt-i8262. Pls explain how to flash 3 part firmware.
Regards Andbug.

andbug said:
I have the same problem with my Gt-i8262. Pls explain how to flash 3 part firmware.
Regards Andbug.
Click to expand...
Click to collapse
Use this guide http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-core-gt-i8262/ with pit file.(pit file is in attach) I hope you will fix your soft-bricked problem.

Mr.Bola said:
Use this guide http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-core-gt-i8262/ with pit file.(pit file is in attach) I hope you will fix your soft-bricked problem.
Click to expand...
Click to collapse
That's fine but how do i acess the bootloader. 3 button combo is not working. whenever I try it vibrates for some time and turns off(dead). But Odin still detects it. Pls help.
Regards Andbug

andbug said:
That's fine but how do i acess the bootloader. 3 button combo is not working. whenever I try it vibrates for some time and turns off(dead). But Odin still detects it. Pls help.
Regards Andbug
Click to expand...
Click to collapse
Bro buy a usb jig or do it yourself check this links
http://www.amazon.com/Generic-Unbrick-Download-Dongle-Samsung/dp/B00DC1ABI0
https://www.youtube.com/watch?v=Uq49XbzaFrA
https://www.youtube.com/watch?v=Rdn5GoRjhn0
https://www.youtube.com/watch?v=jKRrTZayRxU

Bharan5484 said:
I have samsung galaxy core. I tried to put custom OS. Since this is my first time i dont have much knowledge about that. It was got bricked. Now My phone is not turning on:crying:. whenever i try to turn on it keeps on vibrating even it is not going into download or any mode. Please do provide the solution asap. thanks in advance
Click to expand...
Click to collapse
Istall your device drivers. Search on google your stock firmware and download it, then open odin, and install it. Search a guide on youtube to install stock firmware.

[Completed] Samsung galaxy s2 gt-i9100g have huge problem

Firstly its says can't draw image '.jpg_draw_failed' then I google to solve it...then I found a way on Google.. I have to flash with OMAPF..after finished it start then stuck on Samsung logo...then I disconnect USB cable then trying to reboot after that suddenly I have black screen...won't even get on won't even get into recovery or download mode...I trying to flash using Odin but how to flash if my phone won't even getting into download mode...please help me....I have been googling for ages....help mee....I love my s2...and BTW 3 button won't work for me...pull the battery out and in doesn't work..using Omapf again also didn't work.... Thnks in advance.... and btw i already try that samsung 300K Tools but it seems doesnt repond and detect my phone....what else should i do next??

izulshah96 said:
Firstly its says can't draw image '.jpg_draw_failed' then I google to solve it...then I found a way on Google.. I have to flash with OMAPF..after finished it start then stuck on Samsung logo...then I disconnect USB cable then trying to reboot after that suddenly I have black screen...won't even get on won't even get into recovery or download mode...I trying to flash using Odin but how to flash if my phone won't even getting into download mode...please help me....I have been googling for ages....help mee....I love my s2...and BTW 3 button won't work for me...pull the battery out and in doesn't work..using Omapf again also didn't work.... Thnks in advance.... and btw i already try that samsung 300K Tools but it seems doesnt repond and detect my phone....what else should i do next??
Click to expand...
Click to collapse
Hello & welcome to xda-assist,
please visit your device specific form for further information, especially the help section could be interesting to you...
https://forum.xda-developers.com/galaxy-s2/help
Good luck