Database Info

Motorcycle Mount

Ok, I know it sounds crazy but has anyone out there found a good way to mount one of these to a motorcycle?
I have a couple bikes but my new long distance bike is a Honda ST1300 and I am to a point where I am either going to install another Garmin mount for my Street Pilot 2730 on the ST1300 or come up with some way to mount my Nexus One. Basically all I am looking for is the ability to listen to music and hear the navigation. I have the music and nav working now because I have a J&M 2003 CB/Intercom/Aux input on the bike. I can plug my phone in and get sound. So far I have been putting my phone in my jacket pocket with a headphone extension jack run to it. I would rather mount it so it would be easier to charge off a powerlet jack on the bike. I thought about buying one of the Google Car Docks as I like how it seems to securely hold the phone but I fear there is too much built into the base for that to work for me. I was going to pull the base off and try and modify it to use a RAM mount.
My other option that I was considering was a RAM Aqua Box for PDAs. Anyone out there ever try them? I was thinking I might be able to modify one to have a headphone jack and power pass through some how. That would give me the added benefit of being water resistant. My original plan was to just take it down when it is raining.
Anyone out there try any of this?

I have been trying to find something similar. I have the car dock and think it should be sturdy enough to use on a bike if you have a large enough flat area to mount it to. The way the suction cup locks in seems very secure. I haven't tried it yet but intend to soon. A ram mount solution would be much better, however. Has anyone tried the Iphone Ram mount with the nexus one? I've heard that the nexus one fits many of those Iphone cradles so this could be a possible solution.

I can't mount the suction cut to the wind screen as it has an electric windscreen that moves up and down. It would be fine if I had the screen up all the way but in the lower positions it wouldn't work out. About the only other place I could stick it would be on the tank and I don't like that location that well. So I guess I will have to keep my eyes out for a RAM solution. While the iphone and the Nexus are close in size I don't know how well it would work. The Car dock would be the best option. I guess I should just buy one and see if I can modify it to suit my needs. the generic holders are fine in a car but on a motorcycle where they are subject to a lot more forces (wind) and if they fall they are toast means I really need a secure mount.

Have you tried this
http://www.google.com/products?q=motorcycle+cell+phone+mount+nexus&hl=en&aq=f

Well, as of a few minutes ago, that google search gave two results. Of the two, the one intended as a bicycle mount looked like it'd hold the N1 more securely... but both of 'em leave the phone fairly exposed.
For both of the mounts shown, I'd have to say no. Bumps hit harder on a bike - instead of one wheel dipping down into a pothole out of three, you have one out of two. At speed, that's a serious jostle, and neither mount would give me confidence in the phone staying in place.
A ride started with the sun out, can turn rainy at the drop of a dime, and if you're out on the highway, it can take a minute to get off to the side to cover your phone - plenty of time for it to get soaked.
My helmets retain pristine appearance for roughly 20 minutes of ownership - there's a lot of stuff flying through the air on the highway which you'd barely notice (if at all) when riding a car; that tiny rock kicked 20' into the air by the truck 12 car lengths in front of you, could easily smack the back of the phone.
All in all, my recommendation is either a RAM case + mount (expensive! I've priced their stuff), or a small pelican case w/ DIY mounting (cheap, ugly, works - did this for a previous phone and GPS), or do more or less what you've been doing - jacket pocket, screen off. I'd switch over from Bluetooth to a wired connection to helmet speakers, as that'll save your battery - when running mine this way, I can get 5-6 hours of GPS nav from the N1 while riding. Bluetooth, I'd suspect cuts that down by a lot...
If you're doing longer rides (fun! But you shouldn't need GPS for that... I just tape some basic route instructions to my tank, and use the speakers for music), carry a charged-up second battery, and swap when you gas up. When you stop for the night, charge both.
-- Okay, I should've read your OP better - you're not using BT, you're using the headphone jack. With music + nav + screen off, should still be able to do a long ride without issues, I'd think. Handlebar mounts - the closest I've come to inserting my bike into someone's car was when I was looking down at the GPS. Better to go audio only.
(Also: I don't care how rain-proof a jacket claims to be, don't trust 'em - trashed an iphone that way. Now I use a 'seal pouch', safe to submerge (assuming I'm not running a headphone out of it - but with the headphone routed through it, it's still rain-safe, at least), and keep that in my pocket for use when the skies gray up.

wschom said:
Have you tried this
http://www.google.com/products?q=motorcycle+cell+phone+mount+nexus&hl=en&aq=f
Click to expand...
Click to collapse
Thanks, the one that resembles the Google mount where it wraps around the phone more might do the trick. While the bar mount included does me no good it looks like it has a ball on the end that may work with a RAM mount. If it doesn't I am only out $20. I think I will order one up.

shograt said:
Well, as of a few minutes ago, that google search gave two results. Of the two, the one intended as a bicycle mount looked like it'd hold the N1 more securely... but both of 'em leave the phone fairly exposed.
For both of the mounts shown, I'd have to say no. Bumps hit harder on a bike - instead of one wheel dipping down into a pothole out of three, you have one out of two. At speed, that's a serious jostle, and neither mount would give me confidence in the phone staying in place.
A ride started with the sun out, can turn rainy at the drop of a dime, and if you're out on the highway, it can take a minute to get off to the side to cover your phone - plenty of time for it to get soaked.
My helmets retain pristine appearance for roughly 20 minutes of ownership - there's a lot of stuff flying through the air on the highway which you'd barely notice (if at all) when riding a car; that tiny rock kicked 20' into the air by the truck 12 car lengths in front of you, could easily smack the back of the phone.
All in all, my recommendation is either a RAM case + mount (expensive! I've priced their stuff), or a small pelican case w/ DIY mounting (cheap, ugly, works - did this for a previous phone and GPS), or do more or less what you've been doing - jacket pocket, screen off. I'd switch over from Bluetooth to a wired connection to helmet speakers, as that'll save your battery - when running mine this way, I can get 5-6 hours of GPS nav from the N1 while riding. Bluetooth, I'd suspect cuts that down by a lot...
If you're doing longer rides (fun! But you shouldn't need GPS for that... I just tape some basic route instructions to my tank, and use the speakers for music), carry a charged-up second battery, and swap when you gas up. When you stop for the night, charge both.
-- Okay, I should've read your OP better - you're not using BT, you're using the headphone jack. With music + nav + screen off, should still be able to do a long ride without issues, I'd think. Handlebar mounts - the closest I've come to inserting my bike into someone's car was when I was looking down at the GPS. Better to go audio only.
(Also: I don't care how rain-proof a jacket claims to be, don't trust 'em - trashed an iphone that way. Now I use a 'seal pouch', safe to submerge (assuming I'm not running a headphone out of it - but with the headphone routed through it, it's still rain-safe, at least), and keep that in my pocket for use when the skies gray up.
Click to expand...
Click to collapse
Keep in mind there are many types of motorcycles out there. What you said is true on some. If I were riding a cruiser (Harley or one of the many clones) it would say I 100% agree. I don't think I would attempt this on that type of a bike. However the bike I am riding is a Honda ST1300. These bikes are very smooth. I have ridden Harleys and some of the many clones and the V4 with the counter balancers makes an engine buttery smooth and very quite. It is amazing how many of us complain about things you never hear people talk about on a motorcycle. Things like how loud the tires are. Yes, I don't like the tires I am running now because they are too loud.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ST1300
The cowling and electrically adjustable windscreen on it offers lots of protection when needed. I just got back from a trip from Arizona to Minnesota and hit lots of rain from Kansas through to Iowa. I had my phone in my jacket pocket and it was fine. Now keep in mind that my suit is water resistant alone and I had another rain suit on top of it. This was easy to do though because the temps were pretty low. On my ST1100 I have mounted my Garmin 2730 behind the cowling in a similar location to where I would mount the phone and it has very rarely seen any moisture while on the move. I know many other riders on this same bike that use Garmin Nuvis that are not waterproof like my Garmin 2730 and they just put a zip lock bag over it if there is light rain. If it is heavy it goes in one of the many storage bins. I would do the same with the phone. Honestly the most I will use it in this mount is on short rides in good weather. If I am doing a long touring ride it will go in a zip lock in the clear map pouch of my tank bag. I just don't ride around with a tank bag other than when touring.
As for rocks and debris. I am not too worried about them. Again the bike is offers good protection. Sure my helmet takes a beating if I run the windscreen in the low position but with it bumped up again it is pretty much like being on a Goldwing. Potholes are the reason I wanted a mount that wrapped around the phone like what the Google Car Dock does rather than something generic or these simple ones that the phone slides into.
Also in case anyone else is interested in doing something like this in the future. The problem with using the phone like this is that you can't interface with the screen when you have gloves on. I found out that you can stitch some silver thread into the glove so that it conducts through to your skin and you will then be able to interface with the screen. I have also tested and discovered that this works through zip lock style bags as well as the zip lock/clear map case combo on the tank bag. While it should be mentioned it isn't a good idea to be setting up a new route while on the move it is handy to be able to say, route around a detour should you be stopped in traffic or start up the music player should it stop for some reason.

All well and good, but please don't accuse me of riding a cruiser! I ride a naked/standard/streetfighter, depending on who you ask (FWIW: 02 Triumph TB, with ZRX1100 front & rear, rearsets).

sweet
--- ride that is. very sweet. i've not seen one of those up on one wheel before. wow !
i would worry about vibration and moisture without a water resistant box. i've traveled with only a tomtom suction cupped to the tank, and it was secure. would i put my nexus there, certainly not. i also wouldn't put my nexus in the open air. or ANY PHONE that i might rely on in an accident....
when i ride here is what i do:
UNLOCK THE PHONE
PUT "ICE" contract on the main screen, then "WIFE", "PARENTS" with direct dial on the MIDDLE screen
... then just ride sanely as ever, and hope no one has to use my shortcuts. remember, they'll have a much harder time alerting your loved ones if the phone is locked !
also, print an address label, bright orange, with "ICE PHONE IN XYZ COMPARTMENT!!!" on whatever part of your bars / screen/ lid is visible. they're cheap, easy to print/change, and can save a life if your buddy/wife/whatever has fallen and you are unconsciouse.
i'm not preaching, or being negative, hope you don't take it that way.
******
if/when you try out a good, rubber isolated water resistant mount, PLEASE UPDATE THIS THREAD. others would enjoy your knowledge
the bmw forums have some really helpful guys. snobby, sure, but helpful ;-)
ride safe

I've lost faith in ICE contacts ever since I asked a few EMT's whether they check the phone for tagged entries of that nature, and they'd never even heard of the convention. So instead, I just keep a card with contact info in my front breast pocket, in case the wallet gets torn away.
BMW: sure, they'll be helpful, but a large part of the ego there seems to be how much your farkles cost you - velvet-lined, custom machined from aluminum recovered from the space shuttle crash, hand-delivered by the German Prime Minister. I'd check sv650 (or similar, tiger, whatever) forums, since they seem to care more about making something which works, but cheaply.
I may be a bit biased against BMW's. And Harleys.
The small-sized Pelican case (iphone sized) will hold the nexus quite nicely, and the overpressure valve can be made to accomodate cabling in & out of the case in a water-tight fashion. 's what I used for a few years, until I decided I ended up spending too much time looking at lcd's instead of the road.

If you are still thinking about a Pelican case, this might work for you:
http://forum.xda-developers.com/showthread.php?t=638279

shograt said:
All well and good, but please don't accuse me of riding a cruiser! I ride a naked/standard/streetfighter, depending on who you ask (FWIW: 02 Triumph TB, with ZRX1100 front & rear, rearsets).
Click to expand...
Click to collapse
I didn't mean that you were riding a cruiser, just that I would see it being an issue on that type of bike. Where I really have never been hit by anything other than that hands and helmet. Most people have no idea what a ST is because not many are imported so I wasn't sure if you knew what it looked like.

ohgood said:
--- ride that is. very sweet. i've not seen one of those up on one wheel before. wow !
i would worry about vibration and moisture without a water resistant box. i've traveled with only a tomtom suction cupped to the tank, and it was secure. would i put my nexus there, certainly not. i also wouldn't put my nexus in the open air. or ANY PHONE that i might rely on in an accident....
Click to expand...
Click to collapse
Yeah, while not as easy to put up on one wheel as a sport bike (it is 723lbs wet), it will lift in 1st and 2nd without much effort.
That is a good point about needing a phone after an accident. Although after an accident hard enough where I might damage it in a mount, I probably wouldn't be calling anyone. I know a few people that wear custom dog tags when riding with contact info.
I guess the other point of view is that if something were to happen to my phone, I do have insurance on it. I think they replacement deductible was $150 or so. That is less than a lot of GPS devices. Well at least the ones that are worth a darn.
I really wanted to go with the aqua box but I don't know if I can get power and audio jacks in there.

I have a similar thread here in Q&A -
http://forum.xda-developers.com/showthread.php?t=662180
I've got a brodit holder en route and have a rivet gun waiting!
**EDIT** I've ordered one of those Amzer Bike mounts though. Has anyone tried one yet?

AndyCr15 said:
I have a similar thread here in Q&A -
http://forum.xda-developers.com/showthread.php?t=662180
I've got a brodit holder en route and have a rivet gun waiting!
**EDIT** I've ordered one of those Amzer Bike mounts though. Has anyone tried one yet?
Click to expand...
Click to collapse
What are you using the rivet gun for? It looks like you posted photos to a bar mount as well. A bar mount doesn't do me any good on the ST1300. It doesn't use traditional round bars like your bike.
Bars on a ST1300

Rivet gun is for the Brodit Holder I ordered -
I was thinking just to rivet this holder on the left side of the dash.
Since seeing the bike mount, I will wait and see if that can do the job for me before I go drilling holes in things!

Let me know how it works if you think of it.
I am leaning more towards a holder that holds the top of the phone as well. The other option that I am thinking about is the pelican case. I will drill a hole in it to feed a USB cable with a right angle micro USB plug through and seal it up. That way I can power. Then I might add Bluetooth to the intercom system so I don't have to mess with the audio jack.

I don't really want a case round it myself, but definitely I'm wondering about some kind of clip to go on the top to hold it in.
Definitely I want an A2DP BT headset, so I can patch all sound, music, podcasts and calls through the helmet wireless-ly. I do this in my car now and it's awesome!

AndyCr15 said:
I don't really want a case round it myself, but definitely I'm wondering about some kind of clip to go on the top to hold it in.
Definitely I want an A2DP BT headset, so I can patch all sound, music, podcasts and calls through the helmet wireless-ly. I do this in my car now and it's awesome!
Click to expand...
Click to collapse
I have been looking into buying another kit J&M Kit for my bike that would let me do this. For all the parts that I want it is going to add another $500 in parts. That would give me A2DP BT connection to the phone for all sound, music and phone calls. It would also add GMRS/FRS radio for two way communication with other bikes that I ride with in addition to the CB 2 way radio that I have right now. At that point I might as well hook up my Garmin GPS as well because it will give me another input that I won't be using. I already have over $1000 sunk into the communications on my bike to get me intercom, CB and all the other stuff needed to make it work such as noise filters and antenna. I would probably want to add another antenna for the GMRS/FRS radio then to boost my range as not everyone has the ability to talk on both bands. That is kind of the problem I have now. Half of use are on CB and half on GMRS/FRS. With the setup I have now I can pull my aux input and loose music and connect into a GMRS/FRS radio and listen. I just can't talk as I don't have all then necessary parts yet.
Eventually all this stuff gets to the point where it is too easy to get a hold of me. Right now I like it that I can't be reached by cell when I am out riding. It lets me get away from work and all the interruptions in life. Besides talking on the phone and juggling all those radios and GPS is a distraction that can be dangerous on a bike.

You could check out http://www.bikertech.de/, it doesnt have a n1 mount, but you can use some parts or ideas.
I made a bicycle holder out of klickfix + leather case http://www.android-hilfe.de/zubehoer-fuer-nexus-one/21813-fahrrad-halterung.html#post271103.

Car Mount

Here you go boys and girls... get them while they 20 bucks cheaper @
http://www.cellularaccessory.com/ecs-m979beg.html
This is the official Samsung USA car mount found here:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-M979BEGSTA

luckyduck69 said:
Here you go boys and girls... get them while they 20 bucks cheaper @
http://www.cellularaccessory.com/ecs-m979beg.html
This is the official Samsung USA car mount found here:
http://www.samsung.com/us/mobile/cell-phones-accessories/ECS-M979BEGSTA
Click to expand...
Click to collapse
that looks pretty nice but even still a little pricey.

mavictb said:
that looks pretty nice but even still a little pricey.
Click to expand...
Click to collapse
just got mine in today... it's legit badass. very sturdy and it's a suction cup that actually holds suction. the actually phone holder offers 360 degrees rotation and tilt. i give it two thumbs up!

I just got one from http://www.thecellguru.com/Products/26866 for a little under $33 delivered. I have used Cellularaccessory (the OP's source) in the past and found them very helpful as well.
The mount is "OK" in my book. While nicely made and holds the phone well, it isn't anywhere near as adjustable as I would like in terms of angles. There is only a small amount of adjustability in the ball joint that connects the cradle to the arm, perhaps +/- 20 degrees.
Another drawback is it launches the &*^%ing car-mode app/screen and ties it to the home button, which makes for a less-than-useful phone (until I can figure out how to customize that app away).
On the plus side, the lever for the suction cup is very easy to use (much better than, for example, the twist-to-lock used by TomTom).
I also like that there isn't stress on the phone's micro-USB connector. That connector has been a failure point on other phones.
It includes a standard Samsung CLA, which may or may not be able to provide the 1.1A that the T959V can take to charge. I use a USB cable and the Elago 1A (dual) CLA-to-USB which lets me charge the phone, as well as a headset/speakerphone from a single socket. Apparently Amazon has seen enough sales of the Elago line (love their Nano II microSDHC reader) that they have picked them up themselves. JoWow has been good in the past for many orders and Elago items (they were previously the only Amazon-related source).
I'll probably end up ditching the suction-cup arm and figuring out how to better mount the cradle. From what I have read, it isn't the industry-standard pattern, so it will have to be something custom.

I actually made my own mount using a cheap piece of crap mount off Amazon and my old Magellan GPS mount. I took the front part that actually holds the phone, and used a dremel tool to cut new holes in the back so that it would slide on to the arm assembly of the GPS mount. Fits perfect and looks awesome. Best of all, it doesn't fall off my windshield anymore!

Anyone have an issue using a bluetooth headset while docked? It seems to disable unless I undock, make call, and redock.
Sent from my SGH-T959V using XDA Premium App

I was actually thinking about getting:
cgi.ebay.com/Samsung-Galaxy-S-II-4G-Car-Mount-CD-Dash-Holder-Dock-/150620135124?pt=LH_DefaultDomain_0&hash=item2311a8ded4#shId
It mounts to the CD player.

jchambers said:
I was actually thinking about getting:
cgi.ebay.com/Samsung-Galaxy-S-II-4G-Car-Mount-CD-Dash-Holder-Dock-/150620135124?pt=LH_DefaultDomain_0&hash=item2311a8ded4#shId
It mounts to the CD player.
Click to expand...
Click to collapse
Make sure you let us know how that works out. It's interesting... But what if you wanna mess around with your cd player?
What about the ac vents? Perfect spot. Ready to reach, out of the way of everything...
Sent from my SGH-T959V using XDA App

[LIST] Desk, Car, And Other Docks & Stands

Mounts - Docks - Stands - And Other Gadgets
I thought since so many of us have found pretty creative ways of using our tablets, it may be nice to discuss and compile a list of mounts out there that work and don't work. I myself get a bit too obsessed with mounting my gadgets. I really have no reason to need my tablet while driving, but that doesn't mean I don't want it there. I do however need it at work to be open and ready. Alot of available contraptions are a "One Size Fits Many" so you may know of something that works for someone’s iPad or Galaxy Tab that may work here. You don't have to have owned it, if you found something post it up, someone else may buy it and give it a whirl or have had it in the past.
Car Mounts
• Cup Holder Tablet + Phone Mount $50
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This one has decent reviews. The only complaint I see is that it doesn't hold the tablet perfectly still, but keep in mind your mounting a 10" tablet in a car, and in this case via the cup holder. It's not a RAM mount, but it's also a fraction of the price and doesn't require extensive installation. This one is a likely candidate to be ordered and tested out. I like that it gives a spot to place your phone or other stuff such as change or chargers. Speaking of which, it looks like you would have no issue plugging the charging cable in if you were using an inverter or found a car charger that worked.
• Arkon Seat / Floor Mount for Most Tablets $40
This one seems very low profile, very non-intrusive. It includes an 18" flexible arm and a mount that claims to hold 7"-12" tablets. It is important to note that Amazon has something like this listed (see below) that turned out to be total garbage. Hoping this isn't just a rebranded product since it is twice the price.
*Update* Found it on Amazon and it has 4/5 stars with 27 reviews. Pretty good. Havnt read through reviews yet though. Oh and it's cheaper!
]
• Arkon Windshield Mount $26.30 These mounts on extension arms tend to experience alot of bounce while driving, however I have experienced great results by using one of the dashboard beanbag GPS/Phone holders to rest the tablet on which results in a wonderfully stable position.
•RAM Mount Large Tablet Mount If you have your wallet ready and you just want a solid dependable mount without trying a bunch of different products, then RAM Mount is for you. Their X Grip is getting pretty good reviews for holding all sorts of devices and they offer numerous mounting solutions. Expect to pay $100+ for the full setup.
• Pro-Clip $50 + Vehicle Mount
I'm a big fan of ProClip mounts, howver I think they are over priced on some models. I have written How To articles on making your own ProClip type mounts elsewhere on XDA if anyone is interested. But they are very solid mounts and well worth it if you can justify the cash. You buy two halves. One for your phone, one for your vehicle. The positive side is if you get a new phone, youy buy just half the mount costing you roughly $30-$50 or if you get a new vehicle or want to mount it in a new location you buy that piece. I have found that it's quite easy to retrofit the phone half to a generic or home made car half. They offer a variety of mounting options. The only one they have is for the TF100 but it may work as there seems to be a little bit of a gap in the back.
• Goosneck Seat bolt mount on Amazon $20-$25 This one I originally bought and it was garbage. It wobbled very badly and not at the bolt point, but th play in the mount. Add to that the actual tablet mount was too small and would fit my Nook Color at best, and my TF700 wasnt even close to fitting. Stay Away!
Desk Stands
•Cyber Acoustics Universal Tablet Stand (IS-4000) $28.39 I like how this one lifts the tablet up a little leaving room to place your phone or other items below it while providing a nice large strurdy base.
• Rocketfish Tablet Stand $10 At only ten bucks, this is a steal. Rocketfish has a reputation of being pretty damn good at an affordable price. Not the best, but not expensive either. It has a hole in the base to allow charging cable.
•CaseCrown Wood Stand (Redwood) Simple but different tablet stand. Will not allow for horizontal charging (unless upside down, but it does stand out of the crowd by being a nice looking wood design with groves to adjust the angle. And hell it's only $10, that's cheap for anything other then plastic.
• Arkon Portable Fold-Up Stand $10 This stand comes recommended by fellow users who say its a great little fold up stand and it can be had on eBay for about half the Amazon price.
Desktop Docks
Note: As it stands right now, the TF-201 and TF700 Keyboard docks from Asus seem to be identical despite claims of incompatibility. A big thanks to CraftyHack for being suspicious enough to start tearing his toys apart.
• TF201 Keyboard Dock Amethyst Gray $125 These are all over the board in price right now. The plunged originally when Asus claimed they were incompatable, then shot back up when it was discovered to be the same damn thing with a different sticker. These KeyBoard docks are great value to those wanting more then a tablet but don't want a netbook. They pack an extra internal battery boosting runtime up substantially and offer SD card port and a few other features. Many report that they tend to be a little unstable when placed on your lap or other non flat hard surface.
•TF700 Keyboard Dock in Champagne $150 Reported to be the same as the TF201 dock, but matches the newly released Chambagne Infinity.
Other Contraptions
Empire Adjustable Flexible Arm Mount $40 This is something like I was looking for in order to "float" a tablet above my monitors at work. There are several of these of different designs on amazon. Will link a few and will try one out.
• Dockem: Wallmount for any device $15 This is a really cool idea, just two adhesive back brackets that you place on the wall to hold your device. Limited applications, but I think using to hold your tablet on the side of the bed side table to keep it safe and out of the way would be nice. Not for me, but could be useful for someone.
Hope This Helps

Helpful
Very helpul posted!

Haven't thought of it till I noticed this thread...
A mount for my truck would be nice.
Anyone know of a wifi camera that might connect to a tablet for rear view video?
Excellent post!

Thats OK said:
Haven't thought of it till I noticed this thread...
A mount for my truck would be nice.
Anyone know of a wifi camera that might connect to a tablet for rear view video?
Excellent post!
Click to expand...
Click to collapse
LOL, now that's thinking outside the box. You could always do a netbook under the seat. Hell why stop there, set up your own in-car wireless network, either by way of tether or broadcast hotspot. If you tether to PC you could use IP cameras! Yea I know overcomplicated but that's kinda why we're all here right?
But back to reality, a mount in your vehicle could be useful. One of my main reasons for exploring this option is because I no longer own a dedicated GPS. I use my phone for all my nav needs and on occasion you lose data signal at the worse possible time. With NavFree you have offline maps that will get you headed to where you need to be. Plus there's the option of catching up on news, listening to music and things like that especially if you find yourself sitting and waiting alot.

Chief Geek said:
LOL, now that's thinking outside the box. You could always do a netbook under the seat. Hell why stop there, set up your own in-car wireless network, either by way of tether or broadcast hotspot. If you tether to PC you could use IP cameras! Yea I know overcomplicated but that's kinda why we're all here right?
But back to reality, a mount in your vehicle could be useful. One of my main reasons for exploring this option is because I no longer own a dedicated GPS. I use my phone for all my nav needs and on occasion you lose data signal at the worse possible time. With NavFree you have offline maps that will get you headed to where you need to be. Plus there's the option of catching up on news, listening to music and things like that especially if you find yourself sitting and waiting a lot.
Click to expand...
Click to collapse
Heehee...
NavFree 'eh?
That's one we could use.
Wish RAM or Proclip made a fitted tablet mount for the vehicles.
I had one in the towtruck I was driving for the GPS and hand radios.
It snapped in right across where the radio was and I could tilt it toward me.
Popped it right outta there when I quit driving for AAA.
Looks like RAM makes a mount for tabs and laptops...not cheap however and the no-drill set-up takes a little vehicle dis-assembly.
I have the RAM iPhone mount for the truck, but the iPhone is a pain in rear to use or see while driving.
So I don't use it.

Thats OK said:
Heehee...
NavFree 'eh?
That's one we could use.
Wish RAM or Proclip made a fitted tablet mount for the vehicles.
I had one in the towtruck I was driving for the GPS and hand radios.
It snapped in right across where the radio was and I could tilt it toward me.
Popped it right outta there when I quit driving for AAA.
Looks like RAM makes a mount for tabs and laptops...not cheap however and the no-drill set-up takes a little vehicle dis-assembly.
I have the RAM iPhone mount for the truck, but the iPhone is a pain in rear to use or see while driving.
So I don't use it.
Click to expand...
Click to collapse
If you own a heat gun and some very basic tools then just make your own. It's not as pretty, but it's damn near as functional as a ProClip. I did a write up How To on the note forum. I didn't update it with the final product because there was very little interest in making your own 100 car mount for $10. I still use it everyday and have yet to have any problems, even made a few for friends since then.

Ah-ha a DIYguy!
Them heater guns are very handy...
Yer right maybe I could whip sumpthin up!
Not like I'm real busy these days.

http://forum.xda-developers.com/showthread.php?t=1569099
Its nice cause if you mess up the holster you reheat and try again. Kydex is cheap and very forgiving, just dont cut it too small.

don't forget the Asus Audio and Connect Docks, which are still just vaporware mostly, but presumably en route.
http://www.slashgear.com/asus-audio-dock-hands-on-with-transformer-prime-06232637/
doody.

I thought this adjustable angle stand was a great deal for $4. http://www.ebay.com/itm/Brand-new-P...1309123349443426966&pid=100011&prg=1005&rk=4&

Chief Geek said:
http://forum.xda-developers.com/showthread.php?t=1569099
Its nice cause if you mess up the holster you reheat and try again. Kydex is cheap and very forgiving, just don't cut it too small.
Click to expand...
Click to collapse
Groovy and excellent how to!
If the Kydex material is springy yet stiff enough I'm thinking it may just work to span the radio\stereo panel.
I can just plug the tabs headphone into the stereo's interface port for tunes.
The rest is just handled from the touch screen hmmmmmm...

Thats OK said:
Groovy and excellent how to!
If the Kydex material is springy yet stiff enough I'm thinking it may just work to span the radio\stereo panel.
I can just plug the tabs headphone into the stereo's interface port for tunes.
The rest is just handled from the touch screen hmmmmmm...
Click to expand...
Click to collapse
Yea thats sort of what I did. I listen to slacker radio every morning on my drive to work. I can review email and FB when I'm sitting at lights. It's great. Plan to do the same for my tablet. Keep in mind you have to get the right thickness of Kydex, which is available on ebay, its discussed in the thread. Kydex is what many "plastic" holsters are made of, its very resiliant stuff and tough as nails.

MrDoody said:
don't forget the Asus Audio and Connect Docks, which are still just vaporware mostly, but presumably en route.
http://www.slashgear.com/asus-audio-dock-hands-on-with-transformer-prime-06232637/
doody.
Click to expand...
Click to collapse
I'll add them once they officially announce them and put a MSRP on it. I love the looks of them and will probably buy one, but they are dragging their feet. These were released for "hands on" then they went silent. I really would like one, but c'mon asus.

Syn010 said:
I thought this adjustable angle stand was a great deal for $4. http://www.ebay.com/itm/Brand-new-P...1309123349443426966&pid=100011&prg=1005&rk=4&
Click to expand...
Click to collapse
Thats for an auction.

Chief Geek said:
Thats for an auction.
Click to expand...
Click to collapse
With very little monitoring of ebay sales for the item you can get one for $4 free shipping easily at auction.
Or you can buy it outright for $7 with free shipping eg:http://www.ebay.com/itm/Portable-Fo...?pt=US_Tablet_Accessories&hash=item3a76c9715f
I've seen it on amazon too for a few dollars more.
Either way its a great stand because you can adjust its angles, and it folds up nicely.

Syn010 said:
I thought this adjustable angle stand was a great deal for $4. http://www.ebay.com/itm/Brand-new-P...1309123349443426966&pid=100011&prg=1005&rk=4&
Click to expand...
Click to collapse
This is a great stand, I got it on Amazon for $9.35 with free prime shipping. I never use it though because my tablets are usually in a case... great stand though. Lots of angle options and its built like a tank.

Syn010 said:
With very little monitoring of ebay sales for the item you can get one for $4 free shipping easily at auction.
Or you can buy it outright for $7 with free shipping eg:http://www.ebay.com/itm/Portable-Fo...?pt=US_Tablet_Accessories&hash=item3a76c9715f
I've seen it on amazon too for a few dollars more.
Either way its a great stand because you can adjust its angles, and it folds up nicely.
Click to expand...
Click to collapse
AspenMan said:
This is a great stand, I got it on Amazon for $9.35 with free prime shipping. I never use it though because my tablets are usually in a case... great stand though. Lots of angle options and its built like a tank.
Click to expand...
Click to collapse
I usually try to link Amazon as they tend to stay up for awhile where as, with some exceptions, most ebay items are gone in 7-10 days. I'll post the amazon link to it. Thanks for the suggestions guys.

Here's a great car mount by Akron, available on Amazon for $26.33. Bolts right to the seat bolt on the floor. REALLY easy to install. This is the 2nd mount shown in the OP.
To use it like I have it pictured below with the tablet in a case you have to open the clamps really wide and the springs sometimes get pulled of their anchors inside the mount. Simple fix is to take it apart (simple screws) and epoxy the ends of the springs to their plastic mounts. I also stretched out the springs a bit as to not be so tense. The whole fix took 5 minutes.
Other than the initial spring issue it's a very sturdy mount and unlike window mounts, it's not going anywhere. When I used it with my tablet without a case on the springs weren't an issue. The goose-neck does sway a bit while driving and isn't perfectly rigid. This is good because when you hit a big bump or for whatever reason the car is jostled it allows a bit of movement, much easier on the attachment point and tablet.

AspenMan said:
UPDATE: Just noticed you updated the OP with this mount.
Click to expand...
Click to collapse
Been there the whole time, but glad to find someone who has had this one as I'm still flip flopping between what to get. I plan to gt the gum drop case when its released, do you think this mount will be big enough for something like that?

Chief Geek said:
Been there the whole time,
Click to expand...
Click to collapse
Der... lol, my bad.
Chief Geek said:
but glad to find someone who has had this one as I'm still flip flopping between what to get. I plan to gt the gum drop case when its released, do you think this mount will be big enough for something like that?
Click to expand...
Click to collapse
It should fit, but you'll have to fix the springs (or maybe that was just a fluke issue with my mount). It fit's my Xoom with it's Otterbox defender case on if that helps give you reference.

Cheaper solution to OEM phone mount that works!

If anyone is looking to buy a phone mount for his/her car but doesn't want to spend over $50 buying the OEM one for the Motorola Photon 4G LTE. Here is a solution.
http://www.ebay.com/itm/MACALLY-mGR...941219?pt=PDA_Accessories&hash=item43b3f44de3
It is the mGRIP 2 phone mount. I've been using it in my 2010 Toyota Prius and it works flawless..
Suction is great, rarely any vibrations. Can look at gps without having to focus on it due to road bumps.
Adjustments are great, arm, pivot and grip adjustments.
Allows use for all features EXCEPT microSD card slot when using.
I was looking for a phone mount for my Photon 4G LTE for awhile and if your still wondering what it is a good choice, this is one. It will not block charger port (important for gps, since it eats battery), or HDMI port. Nor the vol + and - buttons. Just put the charger in first then mount the phone so the grip come as close to the micro usb as possible, and thats your adjustment (for the grips atleast, you'll have to adjust the arm and pivot still lol). Been using it for a week and so far so good. Sturdy feel the adjustment arms are great for loading and unloading phone. Just a tip for those looking for those to buy a windshield mount other then the official moto one.. I couldn't decide between windshield or vent mount but couldn't be happier with this option. I bought this from the exact link above.
PS - If you buy, make sure you read the tiny instruction so you won't end up breaking your mount. I haven't broke it, I just feel I would have if I didn't read it lol. (The suction has a lever to it to lock on to windshield which works really well).

I used to use a setup like this on my old phone (XT603 Admiral). If you REALLY want to be trick with it, stick an NFC tag on the mount and setup task to put the phone into car mode automatically.
I personally got a Motorola car dock for $30 shipped on eBay, so just keep looking out on Amazon and eBay for these.

I'm a huge fan of the Exomount. It has the greatest suction cup that I've ever seen: http ://www .exogear.com/products-exomount2-car-mount-holder.html
You can get it for $25 off of Amazon.

Holder for motorbike handlebar?

I would like to use my note 8 on my motorbike and I'm searching for a
holder so I can mount it to the handlebar, but I can't find one on the usual sites. Any serious hints would be highly appreciated.
BR
Oerly
Sent from my GT-N5100 using XDA Free mobile app

Normally I would say a Spiderpodium <http://www.breffo.com/> and maybe sugru that to the bike if you want it more permanate.

I used a Slip-Grip RAM mount on my SV650 for my iPhone 5--worked great (sold the bike). You have to pick if you want it for a specific case, or no case. IIRC, my buddy dropped the bike which broke off the tab that holds the phone in--but he did drop it on that side.
Since I'm too new to post links, just Google Slip Grip Car mounts. SLIP-GRIP-RAM-HOL-HOLDER for Samsung Galaxy Note 8 is the one I would probably get (unless you ride in inclement weather; then consider one that allows a water resistant case).
This one also needs the appropriate RAM mount for your bike--RAM makes a center mount and a handlebar mount (might even be others). The nice thing about buying this separate is that you can always keep the mount, but upgrade/change the phone holding component later.