Database Info

[Q] Flashing Mistake

I recently used ODIN to flash my T-mo Vibrant back to stock and then upgrade to Froyo. I was unimpressed by Froyo and wanted to flash a custom rom so I rooted and tried to flash a custom rom and it wouldn't work. I then used Odin to try to flash back to stock....got my vibrant stuck on the phone -triangle- computer dl screen after multiple tries it still wouldn't flash in an act of frustration I dl'd another ODIN and one clicked flashed my Vibrant I then find out that this particular ODIN was made to flash a stock captivate rom so now my Vibrant boots to the at&t world phone screen and loops. I tried button combos to get to dl mode and haven't succeeded.....HELP PLEASE! -also will the dl mode usb jig help in this case?-

I'm not familiar what ODIN is but have you posted or tried looking for your answer under the Samsung Vibrant specific forums?
http://forum.xda-developers.com/forumdisplay.php?f=708

I have the same problem too!

Not sure what to tell you if you cant back into the bootloader...that's kind of an iffy problem...I'd try looking for some info on anyone else who's run into the problem. ODIN's a great tool, but destroying your bootloader can be quite an issue.......

[Q] A Noob who needs help fixing his bricked Galaxy S2

Hi all
Im a newbie (and a noob by the looks of it)
Based in the UK and own a S2 which has 02 firmware but is unlocked
Connected to Kies last night to update to ICS
They go and brick my phone
My question?
How do I get my S2 back up and running?
At this point I dont really mind what it is running but would prefer ICS
I have ODIN Downloded but I am not sure how to get the ROMS/Firmware
Unzip/Zip the file
And how to get it on my phone
It currently goes into the boot mode when you hold Vol Down/Power & Home key
When powered on it comes up with load emergency jargon and connect to Kies which I have done numerous times to no avail
Any help would be appreciated ;-)

Rooted?
Is the phone rooted? I've never used odin. I have used Heimdall, which is pretty much the same.

Its not rooted
Just want to get it up and running asap
Any suggestions

Here's links for branded and unbranded official firmwares.
Unbranded firmware
Branded firmware
Those threads very clearly explain what you need to do to flash official firmware using Odin. Once you've done that you should be up and running again and can take it from there.

Thanks ever so much
I have a hour free now so wish me luck ;-)
Will report back and let you know how things went

OK Rather confused
All of the info is posted as you have stated but which one do I need to do?
Their are so many their and I dont get this whole root thing!?Do I need to root first?
Or do I not root as their is no need?

No root required to flash the stock firmware.
Sent from my Incredible using XDA

I've gotten my GT-I9100 bricked.
Had successfully flashed Resurrection Remix ICS v2.1 ROM along with SiyahKernel v3.3.1. Everything was working fine until some suicidal impulse gripped me to format the SD card from the settings.
The phone did so, 'said restarting device', and then only the Galaxy S2 logo would appear followed by a back screen; which would flicker now and then.
It refuses to load into recovery mode; I have yet to administer the jig.
Any suggestions on how I might be able to get the phone to boot into recovery mode would be extremely appreciated.
Thanking you for your time.

[Q] Urgent Help. Diag mode + Imei-0 Baseband-Unknown

So basically my imei has changed to 0 and baseband to unknown, Suddenly one day I lost signal and network.
I tried flashing different roms and radios and nothing worked, then i researched and found out that I will have to fix my efs which is possible by QPTS.
I need to know how to put my phone to DIAG mode to use QPTS, currently using cynogenmod 10.1 nightly on my Samsung SGH- I727 At&t Skyrocket.
So tellme how ?
Will I have to return to a stable release to use Diag or any other rom?
p.s i cant switch the stock using odin as it gets stuck in a boot loop but can flash other roms.
So if you know about enabling Diag mode on any other rom please tellme how and what rom is it.
Please help to restore my corrupt efs (which i read happens sometimes with flashing roms). If you know any other way also.

Vgkiller said:
So basically my imei has changed to 0 and baseband to unknown, Suddenly one day I lost signal and network.
I tried flashing different roms and radios and nothing worked, then i researched and found out that I will have to fix my efs which is possible by QPTS.
I need to know how to put my phone to DIAG mode to use QPTS, currently using cynogenmod 10.1 nightly on my Samsung SGH- I727 At&t Skyrocket.
So tellme how ?
Will I have to return to a stable release to use Diag or any other rom?
p.s i cant switch the stock using odin as it gets stuck in a boot loop but can flash other roms.
So if you know about enabling Diag mode on any other rom please tellme how and what rom is it.
Please help to restore my corrupt efs (which i read happens sometimes with flashing roms). If you know any other way also.
Click to expand...
Click to collapse
See if the below thread can help you.
http://forum.xda-developers.com/showthread.php?t=1611796

Skyrocket2 said:
See if the below thread can help you.
http://forum.xda-developers.com/showthread.php?t=1611796
Click to expand...
Click to collapse
I already viewed this and tried.
I have a keystr file, whats missing is the nv_data.bin and other such files which hold the imei info.

You can rewrite you imei (if you have it on the back of your phone or in phone documents) with these tools (software & hardware) http://goo.gl/54mtk. Here's a guide for it http://goo.gl/wtW29.
Also you could try this alternative http://goo.gl/ghcJn ..
None of that is free..
And finally you could try helping the op of this thread to add compatibility for skyrocket, this would be free.

lingowistico said:
You can rewrite you imei (if you have it on the back of your phone or in phone documents) with these tools (software & hardware) http://goo.gl/54mtk. Here's a guide for it http://goo.gl/wtW29.
Also you could try this alternative http://goo.gl/ghcJn ..
None of that is free..
And finally you could try helping the op of this thread to add compatibility for skyrocket, this would be free.
Click to expand...
Click to collapse
hey thanks alot man! appreciated!
I have a stock unrooted 4.1.2 running now.
I managed to download QPTS to fix imei .. help me put get my phone to diag mode please?

Vgkiller said:
hey thanks alot man! appreciated!
I have a stock unrooted 4.1.2 running now.
I managed to download QPTS to fix imei .. help me put get my phone to diag mode please?
Click to expand...
Click to collapse
I have no idea what you are talking about, but below may be a method for getting into USB Diag mode.
Just to be clear: I have not read this thread as it is for Verizon Galaxy S3. If you try that on our phone you will do that on your own risk.
I simply suggested you got in touch with amoamare and see if he can help you or add support for our phone in his app.
Some phones must be put into USB Diagnostics mode to do the
unlocking. On your phone, enter *#9090#. Does a menu open? If yes,
select - [1] Uart_null_usb_diag (usually the first option). Depending
on your phone model, this may be called differently. Once selected,
watch for words like “USB Diag” and select such an option. If entering
*#9090# doesn’t do anything, try *#7284# and see whether you can
find anything similar to - [1] Uart_null_usb_diag. If there is no such
thing, ignore this entire step!
Click to expand...
Click to collapse
http://goo.gl/nkx20

Bricked - Stuck on Samsung Galaxy Note 10.1 Screen

Hi,
I bought a bricked Galaxy Note 10.1 GT-N8000 and managed to flash stock firmware and booted correctly except for a strange Watermark on screen which showed device specs. Then I tried flashing German Kitkat version thru ODIN which failed, now the device is stuck on Galaxy Note 10.1 screen even though I have tried flashing ODIN many times and it has shown PASS but doesn't go beyond that. It can't even go get into recovery (only can get to ODIN mode). Please help me as i can't go beyond that even though i have searched a lot google, no one seems to have gotten any solution.

34 views but no suggestion!!! It seems mighty developers never bought this phone to suggest something. It's strange ODIN can flash and shows success (firmware or any recovery) but nothing seems to install and make it boot. Pl someone got some idea?

usman3206 said:
34 views but no suggestion!!! It seems mighty developers never bought this phone to suggest something. It's strange ODIN can flash and shows success (firmware or any recovery) but nothing seems to install and make it boot. Pl someone got some idea?
Click to expand...
Click to collapse
Have you tried flashing a custom rom?.
Just realised you said it wouldn't go into recovery.
Try flashing from another pc
Which version of ODIN are you using?.

No haven't tried custom ROM but probably this device was never rooted but can give that a try. Yes it won't go into recovery at all. I will give try from another PC. I have tried ODIN v. 1.85 and v3.09.

usman3206 said:
No haven't tried custom ROM but probably this device was never rooted but can give that a try. Yes it won't go into recovery at all. I will give try from another PC. I have tried ODIN v. 1.85 and v3.09.
Click to expand...
Click to collapse
I think it might be a driver issue with your pc if it won't work with v1.85.
Trying reinstalling the Samsung drivers on your pc.

I flashed stock firmware before with the same PC and it worked and I have tried to use same ODIN and same stock firmware which worked before. Even now ODIN says PASS, infact there is no failure at all but device itself is stuck on "Samsung Galaxy Note 10.1" splash screen. I have tried restarting PC, using different USB ports but ODIN always says PASS without problem but device condition is same. I think may be i should change firmware/ stock recovery even though previously the same worked. I am at a loss, don't know what to do?
P.S: Edit: as i was writing these comments I thought of trying out same german kitkat version which earlier broke my device and this time it succeeded and at least device has come out of that splash screen though it is still stuck samsung animation screen. so i will try more and will update. any suggestions are welcome. thanks

ok, now it's possible to get into stock recovery at least, although it shows "E:failed to mount /efs (Invalid argument)" and " Applied the CSC-code : unknown". What to do now? kindly advise

Finally managed to ODIN a stock firmware to work correctly and device is able to boot but show "Broadband: Unknown". Thanks for your help

usman3206 said:
Finally managed to ODIN a stock firmware to work correctly and device is able to boot but show "Broadband: Unknown". Thanks for your help
Click to expand...
Click to collapse
Can you check your IMEI if its available in setting/device? If its not your EFS is missing or corrupt.

yes, IMEI is Unknown! that means EFS is corrupt! I know the IMEI, I have the box, how can i restore it?

usman3206 said:
yes, IMEI is Unknown! that means EFS is corrupt! I know the IMEI, I have the box, how can i restore it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2111485

Thanks a lot for the link. I will go through it deeply and try it out and will come back.

Just some food for thought! Since i bought this device bricked and never knew which firmware it came with and tried different firmwares randomly until i found one that could work only with "Factory Mode". My question;
1. Could it be that I flashed a wrong firmware causing this thing to go Factory Mode?
2. Or must it be corrupt EFS folder?
I am asking because now i rooted my device, it is showing one EFS folder and when i tried to flash Philz recovery over TWRP it gave me error that " This package is for 'c).p4noterf.n8000.GT-N8000' devices; this is a 'p4notewifi'.
E:Unable to mount '/efs'.
Any suggestions? Please

I think this efs folder is generated automatically by the android when it can't find one because when i checked it was an empty folder, nothing inside. so may the issue is of broken efs system folder. Can't create my own IMEI since i have the box and IMEI is written on it.

Does this device use SIM to make calls or just for data download? Couldn't figure out! Is there a simple way to get rid of the "Factory Mode"? may be i don't need all that SIM functionality after all but certainly want to get rid of that "Factory Mode".

Can I try this one
http://forum.xda-developers.com/showpost.php?p=39523753&postcount=4
Any suggestions, kindly do suggest if i should do whatever is described in the above post or the ones suggested before written below
http://forum.xda-developers.com/showthread.php?t=2111485
Please advise which method should i try. Awaiting eagerly for input

Is it possible to use following tool to repair EFS?
http://forum.xda-developers.com/gal...ol-updated-09-06-14-efs-professional-t1308546
Please suggest me something if someone out there know something?

Finally fixed it by using the thread shown above but i have a fake IMEI but factory mode is no longer there and everything is working normally. Is it possible to change IMEI to my own by using methods i have seen on net including youtube? please advise

usman3206 said:
I flashed stock firmware before with the same PC and it worked and I have tried to use same ODIN and same stock firmware which worked before. Even now ODIN says PASS, infact there is no failure at all but device itself is stuck on "Samsung Galaxy Note 10.1" splash screen. I have tried restarting PC, using different USB ports but ODIN always says PASS without problem but device condition is same. I think may be i should change firmware/ stock recovery even though previously the same worked. I am at a loss, don't know what to do?
P.S: Edit: as i was writing these comments I thought of trying out same german kitkat version which earlier broke my device and this time it succeeded and at least device has come out of that splash screen though it is still stuck samsung animation screen. so i will try more and will update. any suggestions are welcome. thanks
Click to expand...
Click to collapse
Hi there.
The Note is a tablet 10.1 wifi version?
Is that I have exactly the same problem as you and I do not know what to do to get my tablet.
Could you give me the link of the rom with which you solved the problem? Thank you

spider1371 said:
Hi there.
The Note is a tablet 10.1 wifi version?
Is that I have exactly the same problem as you and I do not know what to do to get my tablet.
Could you give me the link of the rom with which you solved the problem? Thank you
Click to expand...
Click to collapse
Mine is wifi+3G version, its called GT-N8000. Mine was bricked before and I flashed it using ODIN (its available everywhere almost) and stock firmware (you need to use the one installed on it from factory, you can find download link from sammobile site but be careful download the one that is specific for you model no.). Then describe your problem may be i can help you.

[Q] Messed up rooting hoping to find a fix

I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.

inolil said:
I recently got my Samsung Galaxy S6 and decided to root and install TWRP for a custom rom. I was able to root the phone and then installed their android app. TWRP Manager (ROOT).
After that I went to the app and one of the sidebars labeled install TRWP on the app then to the codename zeroflte for the Samsung Galaxy S6. It told me to restart my phone and I did but after that I was not able to use my phone again. Whenever I would turn on my phone it would show the normal Samsung s6 screen with a unlock picture and the words custom underneath. After that it would display a turquoise color screen with a words
Start Up Failed. Your device didn’t start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
I tried to google and see if anyone had a similar problem but nothing popped up. I don’t know where to find a copy for the Verizon Software Repair Assistant for the Galaxy S6.
I also tried and factory reset the phone or anything but the only combinations of buttons that would work on my phone were the down volume + power button. It gave me a list of options including factory reset but every option that I chose would lead me back to the same screen. The turquoise screen saying Start Up Failed.
Any help would be great. I don’t know what to do now. Tomorrow I am going to down to a local repair store and see what they can do. But if you know of anything that would be great. Thank you for your time and have a nice day.
Click to expand...
Click to collapse
Have you tried to Odin back to stock?
http://forum.xda-developers.com/verizon-galaxy-s6/development/5-15-stock-odin-tar-t3109676

Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.

brholt6 said:
Ya, you'll need to odin back to stock like he said. And TWRP isn't available for our phone since we don't have an unlocked bootloader. Do not try and install TWRP again. You'll want to use Flashfire if you need to flash anything.
Click to expand...
Click to collapse
Awesome thank you

I need help!
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you

Bubblegum Mage said:
I did the exact same thing with my Galaxy s6, i tried to do the same thing with my newly acquired root, I am very new but very interested in rooting and customizing my phone, when I plug my phone into a computer it only pops up with the start up failed screen, I installed the odin thing but i have no clue where to go from here and any assistance would be greatly appreciated. thank you
Click to expand...
Click to collapse
Keep in mind XDA is a community for developers by developers. People are also willing to help, but you got to put forth your own effort. You will get ignored if you think people on this site are going to act as free tech support. Your question is posted just a few posts down from a link to the process on using odin to return to stock. You need to just follow those instructions. If you don't understand a step then Google it. I'm saying this because I noticed you joined XDA to ask this question. Or at least it's your first post. You will make a lot of enemies here if you don't take the time to read and research things before posting.

HELP
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?

Bee Funny said:
I have the same problem (Start up failed) but ODIN is not working for me... I am using the stock firmware for the GS6 edge and it says failed... what should I do?
Click to expand...
Click to collapse
If you have an edge you should use their forum. It's different than the GS6.

Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.

Oooah said:
Just had to Odin my Verizon S6 (sm-g920v) to get it back to factory defaults.
I've been rooted for months with no issues and have known my bootloader was locked with no nice way around it but then i read some stupid guides saying to go get twrp manager to load custom roms on the Galaxy s6 phones and they even included the sm-g920v model number. I went to the app store, downloaded twrp manager, followed the first few steps, rebooted and that was that. Could not boot up anymore without Start Up Failed. A few checks and warning would have been greatly appreciated from the app developers but oh well.
Well that was fun. Now to redo everything on my phone.
Click to expand...
Click to collapse
Same exact crap just happened to me. I was running CleanRom Lite....thought I could use TWRP...some times I do stupid things...should have just stuck with FlashFire.

I've tried odin back to stock, it keeps failing. it says nand write fail and it stops. I've tried many different times. I've run Odin 3.10.6 and 3.10.7 I have the latest drivers, it recognizes the device but it will not load anything via odin. I've tried on two different computers as well.

...

Gizmoe said:
...
Click to expand...
Click to collapse
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.

keith7120 said:
I have a Galaxy s6 edge btw. Not much info on the edge, in desperation, I'm combing thru galaxy s6 forums seeking answers. I have been rooted for awhile. I wanted to turn off the nagging volume warning so I downloaded a zip file to flash but only to find that my twrp recovery was no longer there. So I try to download twrp and flash. Now I'm in a boot loop with the turquoise screen telling me to use a verzion tool to reset the device. Klies says my phone isn't compatible as well as smart switch. Odin fails every time after NAND WRITE. I'm about to microwave this crap and get new phone.
Click to expand...
Click to collapse
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
---------- Post added at 06:50 PM ---------- Previous post was at 06:44 PM ----------
Fe Mike said:
Did you ever get your phone up and running? I ran into similar issue with odin. After looking around on web I found a forum that mentioned using an older version of odin.
Click to expand...
Click to collapse
Sorry I saw you tried other odin versions 3. 10.x, I meant going lower. 3.09 is recommended for jb/kk but that worked for me.