Database Info

SGS bricked! Please help or mom will kill me

Dear Friends,
I happened to have a perfectly working rooted SGS running JPK on Froyo until a while ago. When I tried installing fonts with typefresh. This is where everything went haywire. The phone now doesn't want to boot. It says SGS I9000 and vibrates there 4 times and repeats the vibrating cycle. I want the phone to be working again else my mother will murder me. I tried going to the recovery mode and tried to do a factory restore but that didn't help. Tried to reflash the custom ROM I downloaded from this site (can't find that link) using ODIN but it doesn't work either. While reflashing I did not check the repartition tab. What are the possible solutions here?? KIES doesn't detect phone in download mode. Is there any link from where I can download the factory shipped froyo rom and try reflashing the same via ODIN.

Guys please help it has now turned into a Black Screen Of Death. Though I can still go back to Download mode....please help guys this is getting from bad to worse....
Update: The phone now only goes to download mode...

BUMP! Please guys a few hours before mom comes home from work...

Try flashing a 2.1 firmware with Odin.
Google samfirmware.
Sent from my GT-I5700 using XDA App

You could also try flashing
Froyo that does not brick
and then flash to JI6
EDIT:
Do you have the drivers set up for your device?
Also, What device are you using? The SGS line has many phones. My advice above was dependent on it being a Vibrant

Yes I do have the drivers for my device. I'll be trying 2.1 in a while. What are the chances of Samsung giving me a replacement for the device??
I live in India. We don't get the Vibrant here. It's just plain old Samsung Galaxy S GTi9000

pramathesh said:
Yes I do have the drivers for my device. I'll be trying 2.1 in a while. What are the chances of Samsung giving me a replacement for the device??
I live in India. We don't get the Vibrant here. It's just plain old Samsung Galaxy S GTi9000
Click to expand...
Click to collapse
If you can reach download mode, find you favorite firmware in one of the guides on XDA, and using Odin flash it.
If you know what firmware you were on, you can also just reflash the PDA file of that firmware. The PDA file is Packages inside the rar file you download from samfirmware.com
Best thing is to find a guide, and follow it.

I'd JPK before things went haywire. I'm wondering what's the difference between JPK and JPM. Which one should I go for??
I'm planning to flash to JM8 then doing either JPK/JPM. Is this fine?? Or should I directly flash with JPK/M and forget about JM8? Which one is better K or M? Anything else I need to be aware of before I take the plunge??

pramathesh said:
I'd JPK before things went haywire. I'm wondering what's the difference between JPK and JPM. Which one should I go for??
I'm planning to flash to JM8 then doing either JPK/JPM. Is this fine?? Or should I directly flash with JPK/M and forget about JM8? Which one is better K or M? Anything else I need to be aware of before I take the plunge??
Click to expand...
Click to collapse
Hey pal.
It really doesn't matter which firmware you flash. Over the time, I realized that what works for one does not necessarily work for the other. It really is a very subjective thing.
Between JPK and JPM, the later (JPM) is the latest release. If froyo excites you, go for either JPM or even JP6 (JP6 being a day newer than JPM and recommended i suppose). If eclair suits your use, I would suggest JM9
Links:
Eclair - JM9: http://forum.xda-developers.com/showthread.php?t=802909
Froyo - JP6: http://forum.xda-developers.com/showthread.php?t=807351
It really is not difficult flashing firmwares on the i9000. Just follow the instructions from the thread to the dot and you are all set to go. In the same breath, I would also go as far to suggest that you stay away from custom ROM's till you get familiar with the process of flashing ROM's and troubleshooting (in case anything goes wrong). Stick to the stock ROM's and you should be good to begin with.
Do update on your progress.
Cheers.....

Fixed it. Flashed JPK everything working now! Thanks for all the tips and inputs!

[Q] Samsum Galaxy Fit No Boot

Greetings.
It doesn´t boot.
First details:
Galaxy Fit rooted and 2.3.4 Gingerbread (worked fine)
I downloaded rom-manager and wanted to change to custom roms.
So far.
As I tried to install clockwork I found this in your forum:
http://forum.xda-developers.com/showthread.php?t=1339640
and did everything exactly written there
then restartet, started rom-manager and chose the first option (Clockworkthingy).
As there was a choice of the device, I didn´t find my device and chose the last in list (which did´t work and then I picked the first in list and accepted.
downloaded syanogen 7.0 and after download and backup-chose it told me it would reset and start in recovery ... that was the last I´ve seen from my galaxy ...
Is it broken now.
Please help!
note: tried to start recovery with vol+, home and power as well as usual way to start it. without success

Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
I know nearly nothing about Smartphones and stuff so
Please!

Rodsengard said:
Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
Please!
Click to expand...
Click to collapse
Sorry to say that your phone is bricked.
First, rom manager doesn't support your device.
Second, you are an idiot that you selected unknown device from list to make it work.
Third, the thread doesn't have any tutorial about rom manager it is CWM that is meant to be flashed using odin.
Fourth, I probably this is hard brick and nothing can be done.
IN MY VIEW GO TO THE SAMSUNG SERVICE CENTER AND TELL THEM THAT YOU LEFT YOUR FOR CHARGING OVERNIGHT AND ITS NOT BOOTING.
THEY WILL SURELY HELP FOR FREE AS THEY DON'T KNOW WHAT YOU DID AND THIS IS AN APPROPRIATE REASON.

Thank you for your honesty.

Your phone still can be fix up. Your phone not brick yet.. Your phone might get bricked if it running out of battery during flashing, like a half way flashing, then you are in the worse case scenario.
Recovery mode unavailable? Forget about recovery since it has been.broken. What important now is to get access to download mode by pressing vol down + power + home key. If you can access download mode, then your phone can be fixed in 5min.
Read this, before you go any further, if you sure that you already successfully flashed any rom before it went brick. Just do this simple step, for cm7, u need siyah kernel, go download (siyah 2.1.1 .tar)... Not .zip.
Remove your battery then put it back, get into download mode then flash siyah 2.1.1 with Odin 1.85.if your phone already flashed cyanogenmod7, then your phone should boot up and work properly.
If it doesnt work, click the link on my signature, follow all steps provided tp get back your to work as stock. Then start flashing again.
Ps : dont use backup, dont use romanager.
Sent from my GT-I9100 using xda premium

My guide is for SGS2 International. Not ATNT, please find stock rom for your phone version. But the flashing method are just the same..
Sent from my GT-I9100 using xda premium

Thank you for your efforts neobirdrio, but as I wrote above, nothing works.
No combination with vol+ or - and the 2 other HW-Keys.
But if we are still in Topic, what exactly do I have to do with an intact Galaxy fit to flash it to a custom ROM.
What Custom ROMS would run with it?
Where Do I get the Newest Version?
And is it worth changing it?
I wanted something special, something faster than Gingerbread and (of course the original Froyo on it), including something needs less Space.
Could you advice me?
(I ordered a new one swince it happened)

Try read this post,
http://forum.xda-developers.com/showthread.php?t=1120880
Latest stock firmware for galaxy fix is 2.3..which is gingerbread.
Sent from my GT-I9100 using xda premium

Still trying this out.
Did it in this way press three Keys, push batery in and so on ... One time on my netbook it came to life by meaning system told me, that it installs driver (seemed to be recognized right) and ODIN told, there is a connection. I started ODIN (which was prepared to do Gingerbread onto it) But it did nothing. I am not sure if I startet Odin with Adminrights, soooo ... Do now backup of the partition, put a much earlier backup on my PC and try it again (I am running out of PCs, so I simulate, that this is a new Computer )
I keep you informed.
Thanks again so far.

Tried it again, but it didn´come back to life
So Thanks to all ppl helped me.

[Q] Help - I bricked my phone with latest VZW update

Ok, I have a phone that I purchased used. When my S3 got the Jellybean update in December, I found out it had Clockwork Recovery Mod installed on it. It scared the hell out of me, but I went ahead with the update and it was fine. I am a complete newb to rooting and would never root my phone (I lack the skills). When the update went through in December, I was relieved. For more details on all that, see this thread: http://forum.xda-developers.com/showthread.php?t=2048805
Today's update was a different story. This update appears to have broken my phone.This time, it won't even boot up. It just say "System software not authorized by Verizon Wireless has been found on your phone and go to the nearest Verizon Wireless Store for help." Any suggestions on how to fix this? Am I completely screwed? I have almost no knowledge of rooting, ODIN, etc.

R: [Q] Help - I bricked my phone with latest VZW update
It's not bricked.. you should be able to get in download mode and flash a stock firmware with Odin..
edit: I'll link you the url's to the howto's as soon as I get to my pc
Sent from my GT-I9300 using xda premium

zeroblu3 said:
It's not bricked.. you should be able to get in download mode and flash a stock firmware with Odin..
edit: I'll link you the url's to the howto's as soon as I get to my pc
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The weirdest thing just happened. Ok, I put in ODIN mode and pressed cancel. Then like 3 minutes later, it just started up all on its own. The update failed of course but the phone is working again. Weird. Was able to turn it off and restart.
I think I may trade this phone back into the same folks who sold it to me. I am clearly not cut out for this.

i'm glad the problem solved by itself
anyway if you still want to attempt to reset the phone to stock here is everything you should need to know :
http://forum.xda-developers.com/showthread.php?t=1762709 (take a look at section 5)
it's really not as hard as it looks...just be aware there is always a chance that something could go wrong....just take your time, read, and only go ahead if you are fully confident and willing to accept the risks...
let us know how it went and don't hesitate to ask for help if you are still in doubt after reading the forum

I hate how I am average Joe with my root knowledge and I could fix your phone without thinking twice.
It surprises me you have an xda account and can not even root and unlock boot loader.
You ask for help then say. Never mind.
Haha whatever works for you at the end of the day.
Sent from club Clean Rom

[Q] Galaxy S 4G stuck on boot screen

I have a rooted Galaxy S 4G T959 that all of a sudden decided it wanted to freeze on the boot screen. Even when I plug it up to charge it it just shows and empty battery gauge. I updated the phone using kies mini to the latest gingerbread software. The root I used I found on youtube. The file names are heimdall-suite-1.3.1-win32 and I used a driver called zadig. I'm not familiar with the workings of developing and rooting but I'm trying to learn. Which is why I have no idea how to get my phone off the boot screen. If anyone who's had this problem can help please do. I cant get into the phone to check and see if I still have development mode on. Any help you guys can give would be great. thanx

If you rooted with heimdall and then updated using kies you lost root if I'm understanding correctly the order you did this stuff
Do you have cwm? If so just download a rom...slap it on your SD card and install new rom that way.
If not you need to return to stock using heimdall one click or odin. You can search the forum for this stuff. Use that then use a custom GB kernel to get CWM and root using heimdall/odin
Sent from my SGH-T959V using xda premium

Do you have a T-959 or a T-959V? Check under your battery to make sure it's got a V in the model before you flash anything! If it's not the correct phone you can hard brick.
If you DO have a T-959V (Notice the V at the end there? Again, make sure your phone is the correct one) then follow this guide:
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2

[HELP THREAD] Ask any questions [NOOB FRIENDLY]

Welcome everyone!
This thread has been created for extreme newbies/noobs and for their benefit. Not only noobs, but everyone is free to post questions and also give answers to those questions. Any type of question is allowed as long as it is related about the device. No off-topic discussions are allowed!​
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing

Going back versions?
Ok, I'm pretty good on flashing ROMs and using TWRP. But I was thinking of trying a 5.1.1 Rom, I am rooted running just the stock Rom 6.01 currently. I have a SM-N900W8, so I assume I'll likely have to get the modem too depending on what ROM I choose.
My only concern is going backward, I don't know what kernel I might need to flash? Should be able to keep the answer simplistic in explanation, I just need the warnings and a basic checklist of what to do when going backward. And if I can complete this using just TWRP or whether I need to flash something with Odin or whether Flashfire might work.
Thanks in advance. Sorry I'm not a guy who has time to learn code. I try to donate if I'm going to use someone's work though. Just nice to have my phone run fast and smooth and be able to tinker...

Jetmerritt said:
Ok, I'm pretty good on flashing ROMs and using TWRP. But I was thinking of trying a 5.1.1 Rom, I am rooted running just the stock Rom 6.01 currently. I have a SM-N900W8, so I assume I'll likely have to get the modem too depending on what ROM I choose.
My only concern is going backward, I don't know what kernel I might need to flash? Should be able to keep the answer simplistic in explanation, I just need the warnings and a basic checklist of what to do when going backward. And if I can complete this using just TWRP or whether I need to flash something with Odin or whether Flashfire might work.
Thanks in advance. Sorry I'm not a guy who has time to learn code. I try to donate if I'm going to use someone's work though. Just nice to have my phone run fast and smooth and be able to tinker...
Click to expand...
Click to collapse
Hi
What do you mean by 'going backward'? Do you wanna downgrade your device from Marshmallow to Lollipop? If yes, refer to this thread.
Hit Thanks if I Helped You!!!
Regards,
PoseidonKing

Ok, if going back to a earlier version of Android, then flash the factory full ROM of that version through Odin, then flash custom ROM of same version. Got it, thanks. Sounds like the easiest way.

Jetmerritt said:
Ok, if going back to a earlier version of Android, then flash the factory full ROM of that version through Odin, then flash custom ROM of same version. Got it, thanks. Sounds like the easiest way.
Click to expand...
Click to collapse
Yeah. Welcome!
Regards,
PoseidonKing

Stuck N915G
Am using a N915G , it was rooted with CW recovery , since yesterday it would go in restart loop , so i went into recovery and did a reset , still the loop would not go , so i took into a service center they tries kies and it would intall lollipop but half way through it will show " erasing " and then go back to boot loop , now at this point when i re checked the phone there is no CW recovery , so i tried Odin with Marshmallow to flash the system , it shows PASS but during installation " System updating .. erasing " then goes back to reboot so i flashed new set of Pit files , but still the phone stays in boot loop , vibrates then goes off to loop , what am i doing wrong

Won't power on after normal power off.
Hi,
i mean; when i turn of the phone with normal shutdown menu, device power off normally.
But when i attempt to turn on device again, it won't turn on. nothing happens when i press or hold the power button.
only the way to turn on again, "plug a charge cable or usb cable"
after it detects the charge, and shows charging. after then i can turn on the device normal.
but, not possible to turn on without plug the cable once.
so; what can be my device's problem. (there is no another problem) except fast battery drain.
my opinion; humidity damage? or something like that.?
can any oxidation causes this problem?
please reply for help.
thanks.

Bump
Sent from my Motorola XT1080 using XDA Labs

Hello, I rooted my Samsung Galaxy Note Edge (N915T) Tmobile way back in 2014, I have since then forgot how to root again. I know that my phone is still rooted because I have SU.
My phone specs right now:
Bootloader: N915TUVU1ANJL
OS Version: KitKat 4.4.4
CPU: ARMv7-A (armeabi-v7a)
Kernel version: 3.10.0-2990579
I saw a post here in XDA about new Custom ROM (7.1.2 AOKP Nougat) and I would like to install custom ROM, and reading the instructions it states that it requires Bootloader 6.0.1 and Modem. I have no idea how to install bootloader and modem up to 6.0.1 on my phone. Kindly please guide me how to identify my current bootloader and how to upgrade up to 6.0.1. Thanks!

Hello,
I am using Odin v3.12.7 and I tried to select (twrp-3.0.2-0-tbltetmo.img) from Odin, but is not selectable because it does not have (.md5) or (.tar), where can I find a TWRP in those file formats?

What custom rom can i flush with my note edge sc-01g docomo japan,

Corrupt microsdcard and otg devices
Hi,
This is about my note edge N915G and what will follow has strangely happened with every kind of rom for the device stock rooted, aokp, customized stock, and slimroms.
What happens is
scard shows as corrupted after busybox/magisk7viper mods I mean the card is fine when I install busy box and magical and viper then in stall viper drivers and it is still good but when I reboot to activate the viper mods my card shows as corruption. I another thing that happens is when the card shows as corrupt, I I can try another card and still shows corrupt and strangely even the devices I connect through otg all show as corrupt. Ii think it is busy box which is needed for viper that does it, but am not sure.
Another guess is that maybe some embedded file on the phone has been deleted or corrupted and that is causing me the trouble. I have installed the Enhanced rom this evening and had set it up with closed root and magical. I it was all fine. I then I installed busy box using smart install and after that opened viper fx 2.5 and viper xhi=fi and each prompted to install drivers and they installed successfully and advised a reboot. It is after reboot that I opened my music player and found no songs which was be aise it is showing my card as corrupt. I strangely even if I reverse the process and uninstall viper drivers then viper apps and finally busybox it still does not change the status of the card. It is either that I install the rom again dirty or restore a system backup that was made while there were no add ons.
I would really appreciate if anyone can help figure this out as I do have the workaround of restoring system but it is tedious as I have to install all apps etc.
I would like to reiterate that this is not the kind of issue associated with Samsung phones in general where they are said to kill microsdcards. This is not the case and the card works flawlessly in a different phone which I did to check. My laptop too has no issues with same card it is a Samsung evo 64 gb card I'm using. Maybe they key is that even other as cards whether I put them in the card slot or in a card reader for otg it shows any card I use as corrupt and even my otg drives show up as corrupt. I think it is something I have never seen happening yet.
Thanks for reading this and for your suggestions and advice. I will look forward to your thoughts and inputs, knowledge and experience.
Regards
Centaur31

anybody install android 7 on note edge ?
please describe the method
i have been tried a lot to root the device but fail with error
in my phone in the developer setting there is no OEM unlock option
in all guide mentioned to this option
my phone model is: N915F
if possible please help me

At&t Samsung Note Edge N915A 6.0.1
Hi I'm a noob. Last phone I "jailbroke" was a IPhone 3gs. Could you link me in the right direction to root my Samsung note edge from At&t 6.0.1 a list of procedures would be great, also a list of downloads. Anything & Everything I need on my phone or my Laptop to complete the process. All input would be appreciated. I just paid a large chunk of $ to Samsung to have my screen replaced and I am the original owner of my device which I paid a lot of money for in 2014, so I would hate to brick my device. Thanks

Hello
I have Samsung Galaxy Note edge n915F and i want to to flash n915g stock rom in it
is it possible. .?
Or if possible any problem will occur. .?
Thanx in advance