Database Info

Hello, coming from fascinate

I have been flashing my fascinate for a while now, looking to mod a captivate now. Im looking for something solid. Just looking thru your roms. I'm seeing that some people are having sleep of death on some roms. Also, I know nothing of your rom designations. Us on fascinate are on ec01 atm.. untill I'm more up to speed, what is a good, recent, official froyo, based rom? I prefer niceties, bln, voodoo stuffs, lockscreens, power options, acc batt, deodexed..
I will be doing more studys, but these 2 phones seem more diff than I thought they would be.. Voodoo and froyo are my bottom line..
Ps.. You guys are lucky to have so many custom roms.. I'm lost in your dev section.. however its a curse to new comers lol..
sent from my frozen yogurt filled fascinate!

Our official 2.2 is KB1, and as far as I know the only one that supports the noise cancellation hardware. Cog 4.3.1 is a kb1-based rom (and Torch may also be based on kb1, or I may have just been drunk when I read the description many moons ago).
Everything else seems to be based off of the international i9000 roms with reoriented kernels. Try Serendipity, it's pretty decent if you don't mind the i9000 lineage.
We also have MIUI and CM7. MIUI is based off of CM7, and CM7 is based off of the Nexus S source.

You can also check out FireFly, It's based of Rogers 2.2 and comes with the Speedmod Kernel which doesn't have the sleep death issues. It's solid and reliable annnd it's updated every thursdays..what more can you ask for

I believe Fusion is KB1 based as well. KB1 is the only official Captivate Froyo. Personally, I recommend an i9000 ROM, as they're all 2.2.1 based. I'm running Inception right now, and having great success with it. It's only two days old, though, so probably not something you're ready to flash. Very stable and popular i9000 ROMS that I recommend are Serendipity and Continuum. My personal favorite is Precision, but if you go that route, download version 3.5, not 4.0, as 4.0 is still in alpha stage and has a few bugs. I hope my suggestions have helped in any way and welcome to the Captivate community!

Thanks for the responses,
Are you using cwm 3? Were still on cwm 2.5 on the fassy.. I know there was issues with edify scripting.. I'm looking into your beginners guide when I get on my pc later to see the differences in flashing. I feel a good amount of studying will be needed.. Also, do you have all in 1 odin to stock? And odin to stock froyo? Incase I create a bootloop.
1 more question. being that this is a gsm phone.. Do you still odin radio? Or are they included in the roms? I noticed that many rom posts here don't tell what radio to use, or what is compatible.
Thanks I advance, and sorry for picking brains
sent from my frozen yogurt filled fascinate!

OBatRFan said:
I believe Fusion is KB1 based as well. KB1 is the only official Captivate Froyo. Personally, I recommend an i9000 ROM, as they're all 2.2.1 based. I'm running Inception right now, and having great success with it. It's only two days old, though, so probably not something you're ready to flash. Very stable and popular i9000 ROMS that I recommend are Serendipity and Continuum. My personal favorite is Precision, but if you go that route, download version 3.5, not 4.0, as 4.0 is still in alpha stage and has a few bugs. I hope my suggestions have helped in any way and welcome to the Captivate community!
Click to expand...
Click to collapse
Thanks for the feedback.
sent from my frozen yogurt filled fascinate!

neh4pres said:
Thanks for the responses,
Are you using cwm 3? Were still on cwm 2.5 on the fassy.. I know there was issues with edify scripting.. I'm looking into your beginners guide when I get on my pc later to see the differences in flashing. I feel a good amount of studying will be needed.. Also, do you have all in 1 odin to stock? And odin to stock froyo? Incase I create a bootloop.
1 more question. being that this is a gsm phone.. Do you still odin radio? Or are they included in the roms? I noticed that many rom posts here don't tell what radio to use, or what is compatible.
Thanks I advance, and sorry for picking brains
sent from my frozen yogurt filled fascinate!
Click to expand...
Click to collapse
I believe we're on CWM 3. something or other. Never had an issue with it.
We have an ODIN one click back to stock which is recommended to do before flashing and new ROM. As for the radio, I honestly have no clue about that.

neh4pres said:
Thanks for the responses,
Are you using cwm 3? Were still on cwm 2.5 on the fassy.. I know there was issues with edify scripting.. I'm looking into your beginners guide when I get on my pc later to see the differences in flashing. I feel a good amount of studying will be needed.. Also, do you have all in 1 odin to stock? And odin to stock froyo? Incase I create a bootloop.
1 more question. being that this is a gsm phone.. Do you still odin radio? Or are they included in the roms? I noticed that many rom posts here don't tell what radio to use, or what is compatible.
Thanks I advance, and sorry for picking brains
sent from my frozen yogurt filled fascinate!
Click to expand...
Click to collapse
yes modem is included in ROM package itself

modest_mandroid said:
Our official 2.2 is KB1, and as far as I know the only one that supports the noise cancellation hardware. Cog 4.3.1 is a kb1-based rom (and Torch may also be based on kb1, or I may have just been drunk when I read the description many moons ago).
Everything else seems to be based off of the international i9000 roms with reoriented kernels. Try Serendipity, it's pretty decent if you don't mind the i9000 lineage.
We also have MIUI and CM7. MIUI is based off of CM7, and CM7 is based off of the Nexus S source.
Click to expand...
Click to collapse
Torch is kb1 based, but not updated in awhile.
We call them modems, not radios.
You should look at the Onix kernel. It's great.
Continuum v4 unthemed looks alot like stock.
Good luck, and welcome to the captivate forums.

I seem to be hanging up on rooting using super 1 click.. Says waiting for device.. Thinking about odin to stock then trying again.. Unless someone has a better option.
sent from my frozen yogurt filled fascinate!

Thank you all..
sent from my frozen yogurt filled fascinate!

Are you trying to root so you can go to a custom ROM? If so, I wouldn't worry about rooting. I attached an update.zip that will get you CWM. Put the update.zip and the zip of whatever ROM you want to flash on your internal sdcard. Turn the phone off, hold both volume keys and the power keys. The AT&T logo should come up, keep holding the buttons. The logo should pop up again, now let go. it should go to recovery. Now select reinstall packages. The phone should reboot and go to recovery again. Select reinstall packages again and it should go to CWM. I'm assuming you should know how to flash a zip from here if you've had Fascinate experience. The flashing of the ROM will root your phone.
Hope this helps! If you have any questions, just ask.

Andromeda3 is based off the Georgio Armani Cappy. It's a 2.2 rom that has all the goodies you listed. The devs did a fantastic job on it. It's not updated very often because it doesn't need to be. It's fast, looks good, and has everything you want.

thanks... if i can get out of this fix im in ill do that... however i followed this post
http://forum.xda-developers.com/showthread.php?t=818439&highlight=odin+stock
and seem to be stuck at factory rfs.. dont dare unplug yet... i know on my fassy it would not be a big deal.. interrupt and try again.., but i dont know if i could lose download mode if i interrupt on this phone..

neh4pres said:
thanks... if i can get out of this fix im in ill do that... however i followed this post
http://forum.xda-developers.com/showthread.php?t=818439&highlight=odin+stock
and seem to be stuck at factory rfs.. dont dare unplug yet... i know on my fassy it would not be a big deal.. interrupt and try again.., but i dont know if i could lose download mode if i interrupt on this phone..
Click to expand...
Click to collapse
This has happened to me multiple times. Unplug, pull battery, restart ODIN, put battery in, and repeat the flashing process.

OBatRFan said:
This has happened to me multiple times. Unplug, pull battery, restart ODIN, put battery in, and repeat the flashing process.
Click to expand...
Click to collapse
got stuck on sbl bin that time... am i doing something wrong?.. im just opening odin 3, then place pit, place tar.. click start... should i also click partition? or maybe i have a corrupt copy... while i wait for a response ill re download..
thanks for being such a help

Most ROMs are not based on Captivate Froyo, because it sucks.
And Gingerbread ROMs are right around the corner. Just waiting on Samsung releasing the i9000 kernel source.
Sent from my Captivate

Try this version of ODIN: http://forum.xda-developers.com/showthread.php?t=731989&highlight=ODIN
One-click, so need need for PDA and such. That's what I use, but it all depends on whether or not you have three button combo working. If that version doesn't work, just keep trying on both versions, switch USB ports each time.

OBatRFan said:
I believe we're on CWM 3. something or other. Never had an issue with it.
We have an ODIN one click back to stock which is recommended to do before flashing and new ROM. As for the radio, I honestly have no clue about that.
Click to expand...
Click to collapse
we still use cwm 2.5.x.x because as was said 3.x.x.x have issues.
flashing to stock isnt needed anymore as all roms do a wipe, odin should only be used as a repair tool not a normal part of the process.
op just curious what was your phone running before you started odin? whoever posted the update.zip is right all this other stuff is just spinning your wheels. if it was on 2.1 then put that zip on the root of your sd reinstall packages twice and you will be in cwm, from there you can flash any rom. if you were on 2.2 then do a search for 3e recovery sighning and once you get that cracked follow the preceeding instructions

okay.. im all fixed now.. just to let everyone know, it was a computer issue (windows fail). and my usb was not talking correctly. a simple restart solved the issue.. i was worried i was in over my head, and i thank you all for helping. and i apologize for turning this page into a rescue center lol.
i will try that update zip now.. and im on my way to great roms im sure.. you are all a terrific bunch, and im glad to be a part of this forum

[Q] Samsum Galaxy Fit No Boot

Greetings.
It doesn´t boot.
First details:
Galaxy Fit rooted and 2.3.4 Gingerbread (worked fine)
I downloaded rom-manager and wanted to change to custom roms.
So far.
As I tried to install clockwork I found this in your forum:
http://forum.xda-developers.com/showthread.php?t=1339640
and did everything exactly written there
then restartet, started rom-manager and chose the first option (Clockworkthingy).
As there was a choice of the device, I didn´t find my device and chose the last in list (which did´t work and then I picked the first in list and accepted.
downloaded syanogen 7.0 and after download and backup-chose it told me it would reset and start in recovery ... that was the last I´ve seen from my galaxy ...
Is it broken now.
Please help!
note: tried to start recovery with vol+, home and power as well as usual way to start it. without success

Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
I know nearly nothing about Smartphones and stuff so
Please!

Rodsengard said:
Come on. Some of you Guys are able for sure to tell me, if it is hopeless or there IS something I can do to get it working again.
Please!
Click to expand...
Click to collapse
Sorry to say that your phone is bricked.
First, rom manager doesn't support your device.
Second, you are an idiot that you selected unknown device from list to make it work.
Third, the thread doesn't have any tutorial about rom manager it is CWM that is meant to be flashed using odin.
Fourth, I probably this is hard brick and nothing can be done.
IN MY VIEW GO TO THE SAMSUNG SERVICE CENTER AND TELL THEM THAT YOU LEFT YOUR FOR CHARGING OVERNIGHT AND ITS NOT BOOTING.
THEY WILL SURELY HELP FOR FREE AS THEY DON'T KNOW WHAT YOU DID AND THIS IS AN APPROPRIATE REASON.

Thank you for your honesty.

Your phone still can be fix up. Your phone not brick yet.. Your phone might get bricked if it running out of battery during flashing, like a half way flashing, then you are in the worse case scenario.
Recovery mode unavailable? Forget about recovery since it has been.broken. What important now is to get access to download mode by pressing vol down + power + home key. If you can access download mode, then your phone can be fixed in 5min.
Read this, before you go any further, if you sure that you already successfully flashed any rom before it went brick. Just do this simple step, for cm7, u need siyah kernel, go download (siyah 2.1.1 .tar)... Not .zip.
Remove your battery then put it back, get into download mode then flash siyah 2.1.1 with Odin 1.85.if your phone already flashed cyanogenmod7, then your phone should boot up and work properly.
If it doesnt work, click the link on my signature, follow all steps provided tp get back your to work as stock. Then start flashing again.
Ps : dont use backup, dont use romanager.
Sent from my GT-I9100 using xda premium

My guide is for SGS2 International. Not ATNT, please find stock rom for your phone version. But the flashing method are just the same..
Sent from my GT-I9100 using xda premium

Thank you for your efforts neobirdrio, but as I wrote above, nothing works.
No combination with vol+ or - and the 2 other HW-Keys.
But if we are still in Topic, what exactly do I have to do with an intact Galaxy fit to flash it to a custom ROM.
What Custom ROMS would run with it?
Where Do I get the Newest Version?
And is it worth changing it?
I wanted something special, something faster than Gingerbread and (of course the original Froyo on it), including something needs less Space.
Could you advice me?
(I ordered a new one swince it happened)

Try read this post,
http://forum.xda-developers.com/showthread.php?t=1120880
Latest stock firmware for galaxy fix is 2.3..which is gingerbread.
Sent from my GT-I9100 using xda premium

Still trying this out.
Did it in this way press three Keys, push batery in and so on ... One time on my netbook it came to life by meaning system told me, that it installs driver (seemed to be recognized right) and ODIN told, there is a connection. I started ODIN (which was prepared to do Gingerbread onto it) But it did nothing. I am not sure if I startet Odin with Adminrights, soooo ... Do now backup of the partition, put a much earlier backup on my PC and try it again (I am running out of PCs, so I simulate, that this is a new Computer )
I keep you informed.
Thanks again so far.

Tried it again, but it didn´come back to life
So Thanks to all ppl helped me.

[Q] Messed up flashing kernal

I was trying to flash a kernel that i found in a forum, i tried with Voodoo, my phone was already rooted. Then i heard a female robot voice saying something about "partition" and a process that was gonna take like ten min. From then, the google logo pops up and nothing will happen. i cant put it in download or recovery mode. now the robot voice isnt even saying anything basically just stuck on a google logo screen. I have no idea what to do. can someone please help me.

What kind of phone do you have? (Assuming Mesmerize or Showcase?) What version of Android are you on? If you come to (http://webchat.freenode.net/)(#samsung-mesmerize), it be easier to help you out. You'll need to Odin back to Stock before going forward to Voodoo lagfix.

I once biffed my phone up flashing an incapatible kernel and took it back to the store. They were happy to re-flash it for me. I also was not able.to get in recovery.
I simply told them I was trying to perform the 2.3.5 update which was listed on the site and something went wrong.
Just FYI, The voice was the kerenl enabling voodoo lag fix (a very good thing)!
Sent from my SCH-I500 using XDA App

Glitch kernal
I always used the glitch kernal on my mez. worked great for me. Comes loaded in the latest miui build.

doublej3030 said:
What kind of phone do you have? (Assuming Mesmerize or Showcase?) What version of Android are you on? If you come to (__________________________), it be easier to help you out. You'll need to Odin back to Stock before going forward to Voodoo lagfix.
Click to expand...
Click to collapse
Im having a problem with my Mesmerize, and I think this could help me out, but the link wont send me anywhere, can you help me out?

I think i can help u out.
K so if ur having any problems wit ur mesmerize, i'd recommend flashing back to stock rom.
Now to do this, your going to have to go to rootwiki and find the mesmerize forum.
Go to the first thread on the page, and there you can find a link to download Odin 3.1, Eh09 and Eh20 radios, and CWM 4.
To find the stock roms, theres another thread on rootzwiki that has the official USCC stock froyo and gingerbread roms.
With those downloaded, ur just gonna want to flash them on ur phone through odin. Plug phone into computer while holding the down volume the get the phone into downloading mode. Import the two files and there you have it.
Hope this solves ur problem

Blah
This phone is annoying me. Lol.

[Q] NEEd help bricked my phone!

Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!

Drake316PR said:
Hi guys I'm new to this flashing etc world. I used rom manager and installed the wrong clokworldmod and my phone only loads samsung galaxy s 4g screen. I saw the thread about not using rom manager but I already did yesterdey. I'm trying to gain access to download mode with odin but I'm not able to get in!
Click to expand...
Click to collapse
yeah, ROM Manager is a bad thing when it comes to our phone.
ODIN does not put your phone in download mode. There are numerous ways to accomplish that and those are outlined in a few different posts here as well as the wiki.
Do you know if you were on Froyo or Gingerbread before you tried to flash something? Also, what ROM did you try to flash? Going from Froyo to Gingerbread, and vice versa, requires you to flash the proper boot loaders.
I suggest checking out Lumin30's [GUIDES] Fresh out of box Galaxy S 4G [SOLVED] | Heimdall One-Click For Dummies. Awesome guides and they should get you back to a working status.

Reply
I was on Gingerbread 2.3.6 something like that, I wanted to flash to Vahalla Black but didn't even get close to that process sorry for my english. I will check the guides thanks for the fast respond! Thanks again already on download mode!

No worries on the English; you did quite well
Let us know how it goes and if you need help. There are plenty of us here that can help. Once you get the one-click installed, you should be able to flash Valhalla Black with no problem.
Good luck!

Just fine I think
Sent from my SGH-T959V using xda premium

Thanks!!
Thank you very much!! Fixed my phone thanks to you and XDA! I will try to install a custom rom this time I hope to do it well thanks to the links you provided.

Question about flashing ROM
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.

Drake316PR said:
Hi, I fell I'm missing something I don't know where to start so I can flash my already rooted phone with Vahalla Black. Sometimes I read use CWM, other post dont use it,etc I feel lost here. Could you just let me know what I need to flash, software etc.
Click to expand...
Click to collapse
Use the method in the guide in the first link of my signature. Look for Flashing Custom ROM's. You will be using CWM to get Valhalla Black on your phone. The guide has step by step directions.

samsung showcase HELP!!!

I apologize in advance, since I know people have asked questions similar to this already. But I am desperate for help, as I have been trying to fix my phone for 3 days now, and have not gotten anywhere!!! so here is my story/problem.
I was trying to do an update on my samsung showcase (cspire) using kies, and during the download it was interrupted somehow. The phone was bricked. (i think) so then I found something called one-click unbrick. after that i'm able to put the phone in download or recovery mode.
So i have been trying to get factory rom back on my phone. I downloaded odin3 v1.70 and v1.82 (i have tried both of these) and i have downloaded atlas 2.2 for pit and I have tried both EH09_modem_CS.TAR.MD5 and EI20.tar.md5\EI20.tar.md5. Everytime I do this odin freezes on factoryyfs.rfs.... I have tried all the tricks I can find, different usb port, diff cable, running as admin, i even download sandboxie ( someone suggested that)... I dont know if i am doing something wrong, or if it is odin... Also, i'm not rly sure about the software i'm using... I have very little experience with this kind of stuff, but i am really determined to fix this! please forgive my ignorance! TIA!!

Try flashing a custom rom and boot.img first then Odin back to stock

AshtonTS said:
Try flashing a custom rom and boot.img first then Odin back to stock
Click to expand...
Click to collapse
I've been trying to find one, you don't happen to have a link to where I can find one do you?? Also can i do this using odin, the same way I have been trying to get the stock on there?? Thanks for you help!!