Database Info

Magetron v1 APN MNC Settings Glitch

I have been reading this & various forums and having rooted My LG Optimus One weeks ago just installed the Megatron v1 rom yesterday. Amazing rom with a definite 100% speed improvement over the default Telus LG ROM.
I went in the setup my APN setting to get Internet (Over 3G) & MMS messaging working and ran into a snag. The default MNC setting is "37" but Fido (My Provider) seem to require "370" instead. Any attempt at entering the 3rd digit and selecting "Save" results in being sent back to the APN list with the APN I was working on erased & no longer there.
I cannot get 3G internet or MMS messaging working at all with this bin but they were working fine with the default. I am in Quebec, Canada if that will help.
Please find below the setting I was attempting to use which worked on the default bin.
Any help or insight would be appreciated as I love this rom & would like to keep it if at all possible.
Internet
Name: Fido Internet
APN: internet.fido.ca
Proxy: 205.151.11.11
Username: fido
Password: fido
MCC: 302
MCN: 370
MMS
Name: Fido MMS
APN: mms.fido.ca
MMSC: htp://mms.fido.ca
MMS Proxy: 205.151.11.13
MMS Port: 8080 (still needs to be confirmed, I didn't want to test too much without unlimited MMS)
Username: fido
Password: fido
MCC: 302
MCN: 370
APN Type: mms

Try HiAPN by droid in the market to manually set you APNs instead of the built-in app.
Sent from my LG-P509 using XDA Premium App

Omnichron said:
Try HiAPN by droid in the market to manually set you APNs instead of the built-in app.
Sent from my LG-P509 using XDA Premium App
Click to expand...
Click to collapse
Loaded Prime V2 instead and tried HiAPN & APN Manager. Works like a charm. Thanks for the heads up.

What app for WIFI Teathering?

What app would you recommend to wifi teather. My wife only has the ATT 15$ 200mb plan and I would like her to be able to pull from my data when we are away or on the road.
Thanks

Your Inspire should have a built-in wifi hotspot. You can add an APN that will allow the hotspot to work without AT$T's hotspot plan. To add the APN, see this thread:
http://forum.xda-developers.com/showthread.php?t=1042553

Thanks. I will give it a try. I knew there was the wifi already on there, but was worried about ATT trying to add teather plan.

I looked through the thread and saw no "off at&t teathering" apn
Sent from my HTC Inspire 4G using XDA App

mattmiller said:
I looked through the thread and saw no "off at&t teathering" apn
Sent from my HTC Inspire 4G using XDA App
Click to expand...
Click to collapse
It doesn't specifically mention it anywhere in the OP, and I can't remember if it's mentioned within that thread, but if you create an APN as per the instructions and select it, then you'll get the wifi app to work.
From the thread:
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: xxx (Don't change this number!!! It should be set for your market automatically)
MNC: xxx (Don't change this number!!! It should be set for your market automatically)
APN type: default,mms,supl
Everything else: <Not set>
Click to expand...
Click to collapse
I actually used "*" (without quotes) for the APN type.

PTA APN working - FINALLY!!!

All of a sudden, the pta APN network is flawlessly working for me, wife and friend's Skyrockets. I'm in NYC, is it working for you guys?
"Working", meaning that it'll browse regular, full, non-mobile sites with no problems...

Is working for me with no problems since yesterday. Finally
Sent from my SAMSUNG-SGH-I727 using xda premium

Good find. Just pulled up Justin.tv and loaded just like it should. Interesting...

I"m still stuck with mobile only on most sites. Cnn loads full page, but engadget and most others forces mobile.
However justin.tv loads full and normal.

As is mine. After the customer service/in store crap I had to deal with yesterday for 4 hours regarding this "data lag" problem (as they so called it), this better last a good long time.

Same here juat tested it justin.tv worked and loaded no lag as did cnn.com thankfully i just got the skyrocket yesterday but the browser not.loading alot of pages was irritating and made the phone useless to me without wifi. Glad its working now westminster md

Same here. Boston lte
Sent from my SAMSUNG-SGH-I727 using XDA App

what is PTA APN?

djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
it's the stock APN on the phone

djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
If you push menu settings wireless and networks mobile networks its access point names. And theres been an issue with the stock att apn not loading certin webpages but it seems to be corrected for the time being ( hopefully permanently) so if your not having this issue theres no reason to worry or change any settings

Washington DC LTE now working. Thank Goodness, I was about to jump ship.
Sent from my SAMSUNG-SGH-I727 using XDA App

Figures, that's my luck.
I was bothered by the APN issues and ended up returning my SR and going back to the GS2 cause I figured it would take AT&T forever to fix the problem.
Now they go ahead and fix it that fast.
Major bummer.

Had to modify APN settings in Minneapolis/St. Paul
I'm a NOOB to Android, but not smartphones. I wanted to post this reply, because I found most of the information on XDA, but not all in one place. Hopefully this saves others much of the time that I've spent on it.
Issue: My brand new Skyrocket would not connect to AT&T data network from my home when it was sitting right next to my wife's Galaxy S2 that was connected to AT&T data network. NOTE: Minneapolis/St. Paul is non-LTE.
Troubleshooting:
1. Swapped sims -- Galaxy S2 still works; Skyrocket still doesn't work.
2. Factory reset Skyrocket (several times) -- Skyrocket still doesn't work.
3. Got online with AT&T support. Checked some settnigs. Factory reset. -- Skyrocket still doesn't work.
4. Per AT&T support, went back to AT&T store to exchange phone. At the store, AT&T person looked at my phone and turned off the WiFi that had automatically (and correctly) connected to their AT&T hotspot. Voila Skyrocket connected to 4G. Good news, but somewhat distrubing. So, I decided to keep it and work with it some more.
5. Back at home, 4G still working....until I turned on WiFi (which automatically turns off AT&T data network). BAM!! AT&T data network would not come on again, when I turned off WiFi.
6. Next morning a Google search brought me to posts on XDA where others were having issues with the AT&T data network and and MMS.
Root cause:
-APNs configured in my Galaxy S2 were **different** than the APN configured in my Skyrocket -- very much like the posts on XDA.
-AT&T said the PTA network is brand new and they're still working out the kinks." from http://forum.xda-developers.com/showthread.php?t=1342159
-Also pulled some data from here: http://forum.xda-developers.com/archive/index.php/t-1337171.html
Solution:
Short version -- added 3 APNs and selected one of them.
Long version -- New APN Configuration that is working on my Skyrocket
==============
Galaxy S2 Skyrocket **modified configuration*** -- WORKING FOR ME!!!
**Not selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
Name: ATT WAP2
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: supl
==============
Old Skyrocket configuration:
==============
Skyrocket Out of the Box PTA -- not working for me
**Selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
==============
=============
Galaxy S2 Out of the Box APNs -- working on Galaxy S2
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms,supl
=============

Can anyone put the PTA working apn its not working for me.
Running BeastMOD. try to set default but got 3g speed with it.

@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?

Woke up today with no data. Rebuilding the APN fixed the issue. I live near nyc so my guess is lte rollout confused some devices
Sent from my SAMSUNG-SGH-I727 using xda premium

madmike23 said:
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Click to expand...
Click to collapse
my location is north chicago! 60061!

Bypass Throttling EVEN on a STOCK ROM!!!

Did a little digging around on the internet and here is what I found for all AT&T Galaxy SII Plus Skyrocket devices! EVEN STOCK ROMs!!! Yay!
This will enable HSPA+ Speeds NOT LTE!
http://www.traemcneely.com/2011/08/...se-4g-att-phones-samsungs-access-point-names/
APN Settings are as follows
Name: just a typical name, doesn’t matter.
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC:http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms (+supl)
That's all there is to it. Like I said, this will work with ANY ROM, just as well as stock ROM.
Take this and give AT&T the middle finger for limiting our unlimited plan!
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk

I remember using this one on my SGSII and Nexus, and I just checked it out again on my SR...works like a charm.

What if someone is already in an area that only supports HSPA+ ? Is there any work-around?
Sent from my SAMSUNG-SGH-I727 using XDA App

Nope doesnt work for me. Keep getting a message trying to connect but never does.
Sent from my SAMSUNG-SGH-I727 using XDA App

What if someone is already in an area that only supports HSPA+ ? Is there any work-around?
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
I'm actually in an area that oonly supports HSPA+ as well and this works extremely well.
Give it a try.
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk

Nope doesnt work for me. Keep getting a message trying to connect but never does.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Hm. That's strange. Are you clicking the green bubble on the APN?
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk

Doesn't seem to work for me either (in an LTE area). Phone seems to work fine but no data with those settings.

If my find isn't working for you then try this one found by fellow member opencipher
Name: HSPA+ ATT
APN: Phone
APN Type: Internet
All other settings are default. I also am NOT on 2.3.6 and noticed when I updated the APN didn't work anymore, so I went back.
I also have the WAP Cingular built and have working MMS.
Name: ATT WAP
APN: wap.cingular
proxy: wireless.cingular.com
mms proxy: wireless.cingular.com
mms port: 80
mcc: 310
mnc: 410
apn type: mms[/QUOTE]
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk

It only works for 2.3.5 users doesn't work if your on 2.3.6

Neither APNs work for me in LA (an LTE market).
Supposedly the problem is in the radio. AT&T's is locked and won't let you switch.
http://forum.xda-developers.com/showthread.php?p=20159562

Even changing radios none of the methods work.
jedah said:
Neither APNs work for me in LA (an LTE market).
Supposedly the problem is in the radio. AT&T's is locked and won't let you switch.
http://forum.xda-developers.com/showthread.php?p=20159562
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App

JxWayne89 said:
Did a little digging around on the internet and here is what I found for all AT&T Galaxy SII Plus Skyrocket devices! EVEN STOCK ROMs!!! Yay!
This will enable HSPA+ Speeds NOT LTE!
http://www.traemcneely.com/2011/08/...se-4g-att-phones-samsungs-access-point-names/
APN Settings are as follows
Name: just a typical name, doesn’t matter.
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC:http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms (+supl)
That's all there is to it. Like I said, this will work with ANY ROM, just as well as stock ROM.
Take this and give AT&T the middle finger for limiting our unlimited plan!
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Steps say :
13) Press Reset to default, wait, be patient and let the time and date update.
This resets the newly added APN and all I am left with is the stock pta APN.
BTW this is on Skyrocket.
What I am missing?

Non-AT&T LG G4

So I switched recently from T-Mobile to AT&T and kept my T-Mobile LG G4 using it as an unlocked device. Well during the switch the sales rep added what I'm sure he assumes are the correct APN Settings. After he set up the APN, I get a 4g singal but my phone is not receiving data rendering all my data reliant apps useless, which is a major inconvience. Any have any ideas on how to fix this get an lte or data connection running on the phone.
Thanks in Advanced!
Zpryce

Fix
Just moved from T-Mob to AT&T and had the same issue... just got off the phone with AT&T support... here is the fix.
In list mode...
Settings -> More -> Mobile networks -> Access point names -> (hit three buttons at top right) -> Add APN
Name: NXTGENPHONE
APN: NXTGENPHONE
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
MMSC: (as a URL, enter) (hypertext)(transfer)(protocol)(colon)(slash)(slash)mmsc(dot)mobile(dot)att(dot)net
MMS proxy: proxy(dot)mobile(dot)att(dot)net
MMS port: 80
MCC: 310
MNC: 410
Authentication type: not set
APN type: default,mms,supl,hipri
APN protocol: IPv4
Three buttons at top right, Save.
Reboot phone.
Verify wireless is off, do a google lookup to see if you have data.
Voila.