Did a little digging around on the internet and here is what I found for all AT&T Galaxy SII Plus Skyrocket devices! EVEN STOCK ROMs!!! Yay!
This will enable HSPA+ Speeds NOT LTE!
http://www.traemcneely.com/2011/08/...se-4g-att-phones-samsungs-access-point-names/
APN Settings are as follows
Name: just a typical name, doesn’t matter.
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC:http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms (+supl)
That's all there is to it. Like I said, this will work with ANY ROM, just as well as stock ROM.
Take this and give AT&T the middle finger for limiting our unlimited plan!
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
I remember using this one on my SGSII and Nexus, and I just checked it out again on my SR...works like a charm.
What if someone is already in an area that only supports HSPA+ ? Is there any work-around?
Sent from my SAMSUNG-SGH-I727 using XDA App
Nope doesnt work for me. Keep getting a message trying to connect but never does.
Sent from my SAMSUNG-SGH-I727 using XDA App
What if someone is already in an area that only supports HSPA+ ? Is there any work-around?
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
I'm actually in an area that oonly supports HSPA+ as well and this works extremely well.
Give it a try.
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Nope doesnt work for me. Keep getting a message trying to connect but never does.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Hm. That's strange. Are you clicking the green bubble on the APN?
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Doesn't seem to work for me either (in an LTE area). Phone seems to work fine but no data with those settings.
If my find isn't working for you then try this one found by fellow member opencipher
Name: HSPA+ ATT
APN: Phone
APN Type: Internet
All other settings are default. I also am NOT on 2.3.6 and noticed when I updated the APN didn't work anymore, so I went back.
I also have the WAP Cingular built and have working MMS.
Name: ATT WAP
APN: wap.cingular
proxy: wireless.cingular.com
mms proxy: wireless.cingular.com
mms port: 80
mcc: 310
mnc: 410
apn type: mms[/QUOTE]
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
It only works for 2.3.5 users doesn't work if your on 2.3.6
Neither APNs work for me in LA (an LTE market).
Supposedly the problem is in the radio. AT&T's is locked and won't let you switch.
http://forum.xda-developers.com/showthread.php?p=20159562
Even changing radios none of the methods work.
jedah said:
Neither APNs work for me in LA (an LTE market).
Supposedly the problem is in the radio. AT&T's is locked and won't let you switch.
http://forum.xda-developers.com/showthread.php?p=20159562
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App
JxWayne89 said:
Did a little digging around on the internet and here is what I found for all AT&T Galaxy SII Plus Skyrocket devices! EVEN STOCK ROMs!!! Yay!
This will enable HSPA+ Speeds NOT LTE!
http://www.traemcneely.com/2011/08/...se-4g-att-phones-samsungs-access-point-names/
APN Settings are as follows
Name: just a typical name, doesn’t matter.
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC:http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms (+supl)
That's all there is to it. Like I said, this will work with ANY ROM, just as well as stock ROM.
Take this and give AT&T the middle finger for limiting our unlimited plan!
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Steps say :
13) Press Reset to default, wait, be patient and let the time and date update.
This resets the newly added APN and all I am left with is the stock pta APN.
BTW this is on Skyrocket.
What I am missing?
Related
Hey,
My data connection hasn't been working the past couple days so I went into settings to check the apn's and they all got deleted. Could somebody post the stock apn settings from att for me? That'd be great!
Sent from my iPhone using the XDA app
hazard96 said:
Hey,
My data connection hasn't been working the past couple days so I went into settings to check the apn's and they all got deleted. Could somebody post the stock apn settings from att for me? That'd be great!
Sent from my iPhone using the XDA app
Click to expand...
Click to collapse
these are the settings
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username:not set
Password:not set
Server: not set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
mms port - 80
mcc 310
mnc 410
authentication type - none
apn type- internet + mms
on my captivate im currently emulating t-mobile to bypass market restrictions
Hey all, could someone who is stock get the details on the default APN? I want to test a theory...
I will in a minute
Sent from my Desire HD (Inspire) using XDA App
Name - MediaNet
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
Sent from my Desire HD (Inspire) using XDA App
id10terrordfw said:
Hey all, could someone who is stock get the details on the default APN? I want to test a theory...
Click to expand...
Click to collapse
I'm curious to know what you are testing...
Twenty4 said:
Name - MediaNet
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
Sent from my Desire HD (Inspire) using XDA App
Click to expand...
Click to collapse
Thanks, I will report back after some testing. I wanted to compare it to the default APN the ROM loads.
Twenty4 said:
Name - MediaNet
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
Sent from my Desire HD (Inspire) using XDA App
Click to expand...
Click to collapse
I also have the following for APN Type, other than that it is the same as above:
default,admin,fota
I was on chat with ATT and it seems to have 4G you should have "broadband" (no quotes) as the apn
I tried, but it's not working for me.
"wap.cingular" is working but the help desk told me is't only for 3G
wait and see
Interested in knowing the outcome of this...
So far not much difference. March may be the deciding factor when they turn the backhaul on and enable HSPA+ on the network. Being in DFW may have its advantages for this.
broadband as the APN does not work so well right now. No data connection at all. I haven't seen a difference between "Phone" and wap.cingular.
2udCrRAZdK said:
I also have the following for APN Type, other than that it is the same as above:
default,admin,fota
Click to expand...
Click to collapse
I am using the following i got of my old HTC Desire. When i spoke to AT&T rep he told me that i will loose my unlimited data plan which i currently have since i switched to this phone since it is 4G. I can get 2GB data pro or 200MB plan this sucks.
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
ptulluri said:
I am using the following i got of my old HTC Desire. When i spoke to AT&T rep he told me that i will loose my unlimited data plan which i currently have since i switched to this phone since it is 4G. I can get 2GB data pro or 200MB plan this sucks.
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Click to expand...
Click to collapse
Your rep is wrong. I upgraded to the inspire on launch day and was able to keep my unlimited.
On the AT&T thing, if u upgrade in person, then they do change ur plan but if u would of done it online then u would of kept it...
Sent from my X10a using XDA App
I just went to the AT&T store and was able to change my plan to unlimited one.
All of a sudden, the pta APN network is flawlessly working for me, wife and friend's Skyrockets. I'm in NYC, is it working for you guys?
"Working", meaning that it'll browse regular, full, non-mobile sites with no problems...
Is working for me with no problems since yesterday. Finally
Sent from my SAMSUNG-SGH-I727 using xda premium
Good find. Just pulled up Justin.tv and loaded just like it should. Interesting...
I"m still stuck with mobile only on most sites. Cnn loads full page, but engadget and most others forces mobile.
However justin.tv loads full and normal.
As is mine. After the customer service/in store crap I had to deal with yesterday for 4 hours regarding this "data lag" problem (as they so called it), this better last a good long time.
Same here juat tested it justin.tv worked and loaded no lag as did cnn.com thankfully i just got the skyrocket yesterday but the browser not.loading alot of pages was irritating and made the phone useless to me without wifi. Glad its working now westminster md
Same here. Boston lte
Sent from my SAMSUNG-SGH-I727 using XDA App
what is PTA APN?
djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
it's the stock APN on the phone
djarpit said:
what is PTA APN?
Click to expand...
Click to collapse
If you push menu settings wireless and networks mobile networks its access point names. And theres been an issue with the stock att apn not loading certin webpages but it seems to be corrected for the time being ( hopefully permanently) so if your not having this issue theres no reason to worry or change any settings
Washington DC LTE now working. Thank Goodness, I was about to jump ship.
Sent from my SAMSUNG-SGH-I727 using XDA App
Figures, that's my luck.
I was bothered by the APN issues and ended up returning my SR and going back to the GS2 cause I figured it would take AT&T forever to fix the problem.
Now they go ahead and fix it that fast.
Major bummer.
Had to modify APN settings in Minneapolis/St. Paul
I'm a NOOB to Android, but not smartphones. I wanted to post this reply, because I found most of the information on XDA, but not all in one place. Hopefully this saves others much of the time that I've spent on it.
Issue: My brand new Skyrocket would not connect to AT&T data network from my home when it was sitting right next to my wife's Galaxy S2 that was connected to AT&T data network. NOTE: Minneapolis/St. Paul is non-LTE.
Troubleshooting:
1. Swapped sims -- Galaxy S2 still works; Skyrocket still doesn't work.
2. Factory reset Skyrocket (several times) -- Skyrocket still doesn't work.
3. Got online with AT&T support. Checked some settnigs. Factory reset. -- Skyrocket still doesn't work.
4. Per AT&T support, went back to AT&T store to exchange phone. At the store, AT&T person looked at my phone and turned off the WiFi that had automatically (and correctly) connected to their AT&T hotspot. Voila Skyrocket connected to 4G. Good news, but somewhat distrubing. So, I decided to keep it and work with it some more.
5. Back at home, 4G still working....until I turned on WiFi (which automatically turns off AT&T data network). BAM!! AT&T data network would not come on again, when I turned off WiFi.
6. Next morning a Google search brought me to posts on XDA where others were having issues with the AT&T data network and and MMS.
Root cause:
-APNs configured in my Galaxy S2 were **different** than the APN configured in my Skyrocket -- very much like the posts on XDA.
-AT&T said the PTA network is brand new and they're still working out the kinks." from http://forum.xda-developers.com/showthread.php?t=1342159
-Also pulled some data from here: http://forum.xda-developers.com/archive/index.php/t-1337171.html
Solution:
Short version -- added 3 APNs and selected one of them.
Long version -- New APN Configuration that is working on my Skyrocket
==============
Galaxy S2 Skyrocket **modified configuration*** -- WORKING FOR ME!!!
**Not selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms
Name: ATT WAP2
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: supl
==============
Old Skyrocket configuration:
==============
Skyrocket Out of the Box PTA -- not working for me
**Selected**
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
==============
=============
Galaxy S2 Out of the Box APNs -- working on Galaxy S2
**Selected**
Name: ATT Phone
APN: Phone
MCC: 310
MNC: 410
APN type: Inernet
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
APN type: mms,supl
=============
Can anyone put the PTA working apn its not working for me.
Running BeastMOD. try to set default but got 3g speed with it.
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Woke up today with no data. Rebuilding the APN fixed the issue. I live near nyc so my guess is lte rollout confused some devices
Sent from my SAMSUNG-SGH-I727 using xda premium
madmike23 said:
@saildiverdog
I had those apns listed here before from my own trial and errors in the OP of http://forum.xda-developers.com/showthread.php?t=1342159 . But since then took them down after the PTA network started working for a lot of us. And the wap.Cingular/PTA or wap.cingular/phone combo stopped working. The strange part was that the phone combo worked for me and my wife's worked with the PTA combo. Since the original post of this thread, they stopped working and the PTA was up and running.
For the rest/future readers, what's your location where the default apn is not working for you?
Click to expand...
Click to collapse
my location is north chicago! 60061!
just curious on this... Now ive always used the settings below...
Name: AT&T
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms
but i have also seen this done in several roms, and was curious which one was better to use?
http://forum.xda-developers.com/showthread.php?t=1109983
(with auto-switching OFF)
I do have HSPA+ / 4g in my area, and currently running the latest MiUi... not sure if the rom makes a difference or not. Also have the UCKL-2 modem.
which one is best? ive seen that using the second one is better, and requires a reboot to take effect, could someone enlighten me on this?
50 views and ZERO responses... Awesome.
Ph0z3 said:
50 views and ZERO responses... Awesome.
Click to expand...
Click to collapse
As with just about everything else about your phone, it's all subjective. What works awesome for you might not be worth a damn for me. Just go with what works best for you and forget the existential questions.
N0ctrnl said:
As with just about everything else about your phone, it's all subjective. What works awesome for you might not be worth a damn for me. Just go with what works best for you and forget the existential questions.
Click to expand...
Click to collapse
This !!! Same goes for modems etcetc
E3D
Here's the APN that I use
Ph0z3 said:
just curious on this... Now ive always used the settings below...
Name: AT&T
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC: http://mmsc.cingular.com
MMS proxy: 66.209.11.32
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms
but i have also seen this done in several roms, and was curious which one was better to use?
http://forum.xda-developers.com/showthread.php?t=1109983
(with auto-switching OFF)
I do have HSPA+ / 4g in my area, and currently running the latest MiUi... not sure if the rom makes a difference or not. Also have the UCKL-2 modem.
which one is best? ive seen that using the second one is better, and requires a reboot to take effect, could someone enlighten me on this?
Click to expand...
Click to collapse
the above is the one I use with no problems. before editing my apn settings, I always had problems dl from the market running miui..after doing the apn settings, all is good.
Truckerglenn said:
Here's the APN that I use
Click to expand...
Click to collapse
right on... il try this one, cause the one im using drops data alot and has issues with the market.
Ltilt2 said:
the above is the one I use with no problems. before editing my apn settings, I always had problems dl from the market running miui..after doing the apn settings, all is good.
Click to expand...
Click to collapse
that setting is good unless im dealing with the market..
I tried the one you have posted for the sgsII and i didn't see any differences.
Sent from my SAMSUNG-SGH-I997
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Sensation-al! said:
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Click to expand...
Click to collapse
I have the same problem with MMS as well.
I opened a topic in Q/A section but no one replied...
Im on energy ics rom and its my first custom rom setted mms apns for rogers correctly couldn't send pics didn't try receiving tho...
Sent from my HTC Sensation Z710e using xda premium
I don't know if this helps or not, but It seems like people with American Carriers, or T-mobile tend to not have issues with MMS. I don't know if this would work, but maybe comparing APN settings and seeing if anything is missing may work?
Settings -> More.. -> Mobile Networks -> Access Point Names ->
at this point I had three or three options...
I assume they were: T-Mobile, T-Mobile Data, and T-Mobile MMS
Now since I use Simple Mobile, I had to change the T-Mobile to Simple Mobile with all the correct settings, and for MMS to work I also had to change the T-Mobile MMS APN with the same exact settings as the Simple Mobile APN.
-----------------------------------------------------------------------------
One other way you may try, after putting all the correct settings;
Where is says APN Type, write "mms" (without quotes)
Give it a try. Hope it helps.
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Me on rogers it wasn't a signal issue as i had full bars i just saw the "h" coming up only the upper bar was lightning but the lower one was normal..
Sent from my HTC Sensation Z710e using xda premium
Sensation-al! said:
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Click to expand...
Click to collapse
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
I am with O2 uk and also had this issue. I contacted them and they emailed their latest apn settings to me, which I copied in to my settings and my mms then worked fine. I think when some custom roms search for the apns automatically they pick up out of date settings. Just phone your carrier and ask for the apn settings for mms as if you are getting internet but no mms on several roms it can only be due to incorrect apn.
sent from my Sensation XE
Pikabat said:
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
Click to expand...
Click to collapse
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
it did lol thanks dude , any idea what caused that?
No clue, maybe I should call back office and let them know..
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
thanks! solved my problem!
MasterGGM said:
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
Click to expand...
Click to collapse
For those having trouble with Rogers, I wasted quite a bit of time trying to figure out why I couldn't send/receive MMS. Solution for me was this:
1. USE ONLY THIS APN, DELETE ALL THE OTHER APNS - For some reason, it conflicted and when I deleted all the other unnecessary APN's it worked great again. Here's what I used and ONLY this one for Rogers Canada. The internet.com apn doesn't work for me, fortunately I found this one that works!
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Problem still exists, any ideas?
Sent from my Sensation using XDA