Hey all, could someone who is stock get the details on the default APN? I want to test a theory...
I will in a minute
Sent from my Desire HD (Inspire) using XDA App
Name - MediaNet
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
Sent from my Desire HD (Inspire) using XDA App
id10terrordfw said:
Hey all, could someone who is stock get the details on the default APN? I want to test a theory...
Click to expand...
Click to collapse
I'm curious to know what you are testing...
Twenty4 said:
Name - MediaNet
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
Sent from my Desire HD (Inspire) using XDA App
Click to expand...
Click to collapse
Thanks, I will report back after some testing. I wanted to compare it to the default APN the ROM loads.
Twenty4 said:
Name - MediaNet
APN - Phone
MMS Protocol - wap 2.0
MCC - 310
MNC - 410
everything else is "not set"
Sent from my Desire HD (Inspire) using XDA App
Click to expand...
Click to collapse
I also have the following for APN Type, other than that it is the same as above:
default,admin,fota
I was on chat with ATT and it seems to have 4G you should have "broadband" (no quotes) as the apn
I tried, but it's not working for me.
"wap.cingular" is working but the help desk told me is't only for 3G
wait and see
Interested in knowing the outcome of this...
So far not much difference. March may be the deciding factor when they turn the backhaul on and enable HSPA+ on the network. Being in DFW may have its advantages for this.
broadband as the APN does not work so well right now. No data connection at all. I haven't seen a difference between "Phone" and wap.cingular.
2udCrRAZdK said:
I also have the following for APN Type, other than that it is the same as above:
default,admin,fota
Click to expand...
Click to collapse
I am using the following i got of my old HTC Desire. When i spoke to AT&T rep he told me that i will loose my unlimited data plan which i currently have since i switched to this phone since it is 4G. I can get 2GB data pro or 200MB plan this sucks.
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
ptulluri said:
I am using the following i got of my old HTC Desire. When i spoke to AT&T rep he told me that i will loose my unlimited data plan which i currently have since i switched to this phone since it is 4G. I can get 2GB data pro or 200MB plan this sucks.
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Click to expand...
Click to collapse
Your rep is wrong. I upgraded to the inspire on launch day and was able to keep my unlimited.
On the AT&T thing, if u upgrade in person, then they do change ur plan but if u would of done it online then u would of kept it...
Sent from my X10a using XDA App
I just went to the AT&T store and was able to change my plan to unlimited one.
Related
What app would you recommend to wifi teather. My wife only has the ATT 15$ 200mb plan and I would like her to be able to pull from my data when we are away or on the road.
Thanks
Your Inspire should have a built-in wifi hotspot. You can add an APN that will allow the hotspot to work without AT$T's hotspot plan. To add the APN, see this thread:
http://forum.xda-developers.com/showthread.php?t=1042553
Thanks. I will give it a try. I knew there was the wifi already on there, but was worried about ATT trying to add teather plan.
I looked through the thread and saw no "off at&t teathering" apn
Sent from my HTC Inspire 4G using XDA App
mattmiller said:
I looked through the thread and saw no "off at&t teathering" apn
Sent from my HTC Inspire 4G using XDA App
Click to expand...
Click to collapse
It doesn't specifically mention it anywhere in the OP, and I can't remember if it's mentioned within that thread, but if you create an APN as per the instructions and select it, then you'll get the wifi app to work.
From the thread:
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: xxx (Don't change this number!!! It should be set for your market automatically)
MNC: xxx (Don't change this number!!! It should be set for your market automatically)
APN type: default,mms,supl
Everything else: <Not set>
Click to expand...
Click to collapse
I actually used "*" (without quotes) for the APN type.
I have searched on xda, and on google for this problem. I also tried enabling the options for 2g/3g, rooting the phone, and doing all of that successfully. I have restored the device, and checked for system updates, and my Atrix 2 is up to date. I can also send/receive sms, and I can call people as well. I have a 2GB data plan for AT&T which worked on my previous phone, HTC Inspire 4G. But once I switched to the Atrix 2, no matter what I have tried, I cannot access the internet using my data. If I open the brower, it says:
"No network connection
Brower cannot load this page because there is no internet connection."
I have my data enabled in Settings>Battery & data manager>Data delivery>Data enabled
I have no idea what the problem is... Can someone help?
chensan215 said:
I have searched on xda, and on google for this problem. I also tried enabling the options for 2g/3g, rooting the phone, and doing all of that successfully. I have restored the device, and checked for system updates, and my Atrix 2 is up to date. I can also send/receive sms, and I can call people as well. I have a 2GB data plan for AT&T which worked on my previous phone, HTC Inspire 4G. But once I switched to the Atrix 2, no matter what I have tried, I cannot access the internet using my data. If I open the brower, it says:
"No network connection
Brower cannot load this page because there is no internet connection."
I have my data enabled in Settings>Battery & data manager>Data delivery>Data enabled
I have no idea what the problem is... Can someone help?
Click to expand...
Click to collapse
Maybe reboot phone?
Sent from my MB865 using Tapatalk
I have rebooted it at least 5 times now. GPS does not work either.... wtf is wrong with my phone...
I had the exact problem a month ago. I called AT&T, and they did some setting from their side, then internet came back.
Sent from my Transformer TF101 using xda premium
chensan215 said:
I have rebooted it at least 5 times now. GPS does not work either.... wtf is wrong with my phone...
Click to expand...
Click to collapse
Might need to call AT&T. Same thing happened to me once and I had to give them my sim card info. Either way they might be able to help.
Sent from my MB865 using Tapatalk
Fixed! I had to create a new APN
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
but now it works haha
chensan215 said:
Fixed! I had to create a new APN
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
but now it works haha
Click to expand...
Click to collapse
Hey good deal! also thanks for the apn info.
Sent from my MB865 using Tapatalk
chensan215 said:
Fixed! I had to create a new APN
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
but now it works haha
Click to expand...
Click to collapse
I had to do exactly the same thing! Inserted my SIM from my Nexus One and I had phone but no data. Not sure why the existing APNs did not work, but this solved my problem as well.
Did a little digging around on the internet and here is what I found for all AT&T Galaxy SII Plus Skyrocket devices! EVEN STOCK ROMs!!! Yay!
This will enable HSPA+ Speeds NOT LTE!
http://www.traemcneely.com/2011/08/...se-4g-att-phones-samsungs-access-point-names/
APN Settings are as follows
Name: just a typical name, doesn’t matter.
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC:http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms (+supl)
That's all there is to it. Like I said, this will work with ANY ROM, just as well as stock ROM.
Take this and give AT&T the middle finger for limiting our unlimited plan!
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
I remember using this one on my SGSII and Nexus, and I just checked it out again on my SR...works like a charm.
What if someone is already in an area that only supports HSPA+ ? Is there any work-around?
Sent from my SAMSUNG-SGH-I727 using XDA App
Nope doesnt work for me. Keep getting a message trying to connect but never does.
Sent from my SAMSUNG-SGH-I727 using XDA App
What if someone is already in an area that only supports HSPA+ ? Is there any work-around?
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
I'm actually in an area that oonly supports HSPA+ as well and this works extremely well.
Give it a try.
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Nope doesnt work for me. Keep getting a message trying to connect but never does.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Hm. That's strange. Are you clicking the green bubble on the APN?
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Doesn't seem to work for me either (in an LTE area). Phone seems to work fine but no data with those settings.
If my find isn't working for you then try this one found by fellow member opencipher
Name: HSPA+ ATT
APN: Phone
APN Type: Internet
All other settings are default. I also am NOT on 2.3.6 and noticed when I updated the APN didn't work anymore, so I went back.
I also have the WAP Cingular built and have working MMS.
Name: ATT WAP
APN: wap.cingular
proxy: wireless.cingular.com
mms proxy: wireless.cingular.com
mms port: 80
mcc: 310
mnc: 410
apn type: mms[/QUOTE]
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
It only works for 2.3.5 users doesn't work if your on 2.3.6
Neither APNs work for me in LA (an LTE market).
Supposedly the problem is in the radio. AT&T's is locked and won't let you switch.
http://forum.xda-developers.com/showthread.php?p=20159562
Even changing radios none of the methods work.
jedah said:
Neither APNs work for me in LA (an LTE market).
Supposedly the problem is in the radio. AT&T's is locked and won't let you switch.
http://forum.xda-developers.com/showthread.php?p=20159562
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I727 using XDA App
JxWayne89 said:
Did a little digging around on the internet and here is what I found for all AT&T Galaxy SII Plus Skyrocket devices! EVEN STOCK ROMs!!! Yay!
This will enable HSPA+ Speeds NOT LTE!
http://www.traemcneely.com/2011/08/...se-4g-att-phones-samsungs-access-point-names/
APN Settings are as follows
Name: just a typical name, doesn’t matter.
APN: wap.cingular
Proxy: {leave this blank}
Port: {leave this blank}
User name: [email protected]
Password: CINGULAR1
Server: {leave this blank}
MMSC:http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: {leav this blank}
APN type: internet + mms (+supl)
That's all there is to it. Like I said, this will work with ANY ROM, just as well as stock ROM.
Take this and give AT&T the middle finger for limiting our unlimited plan!
Sent from my SAMSUNG-SGH-I727 using the XDA mobile application powered by Tapatalk
Click to expand...
Click to collapse
Steps say :
13) Press Reset to default, wait, be patient and let the time and date update.
This resets the newly added APN and all I am left with is the stock pta APN.
BTW this is on Skyrocket.
What I am missing?
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Sensation-al! said:
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Click to expand...
Click to collapse
I have the same problem with MMS as well.
I opened a topic in Q/A section but no one replied...
Im on energy ics rom and its my first custom rom setted mms apns for rogers correctly couldn't send pics didn't try receiving tho...
Sent from my HTC Sensation Z710e using xda premium
I don't know if this helps or not, but It seems like people with American Carriers, or T-mobile tend to not have issues with MMS. I don't know if this would work, but maybe comparing APN settings and seeing if anything is missing may work?
Settings -> More.. -> Mobile Networks -> Access Point Names ->
at this point I had three or three options...
I assume they were: T-Mobile, T-Mobile Data, and T-Mobile MMS
Now since I use Simple Mobile, I had to change the T-Mobile to Simple Mobile with all the correct settings, and for MMS to work I also had to change the T-Mobile MMS APN with the same exact settings as the Simple Mobile APN.
-----------------------------------------------------------------------------
One other way you may try, after putting all the correct settings;
Where is says APN Type, write "mms" (without quotes)
Give it a try. Hope it helps.
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Me on rogers it wasn't a signal issue as i had full bars i just saw the "h" coming up only the upper bar was lightning but the lower one was normal..
Sent from my HTC Sensation Z710e using xda premium
Sensation-al! said:
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Click to expand...
Click to collapse
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
I am with O2 uk and also had this issue. I contacted them and they emailed their latest apn settings to me, which I copied in to my settings and my mms then worked fine. I think when some custom roms search for the apns automatically they pick up out of date settings. Just phone your carrier and ask for the apn settings for mms as if you are getting internet but no mms on several roms it can only be due to incorrect apn.
sent from my Sensation XE
Pikabat said:
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
Click to expand...
Click to collapse
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
it did lol thanks dude , any idea what caused that?
No clue, maybe I should call back office and let them know..
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
thanks! solved my problem!
MasterGGM said:
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
Click to expand...
Click to collapse
For those having trouble with Rogers, I wasted quite a bit of time trying to figure out why I couldn't send/receive MMS. Solution for me was this:
1. USE ONLY THIS APN, DELETE ALL THE OTHER APNS - For some reason, it conflicted and when I deleted all the other unnecessary APN's it worked great again. Here's what I used and ONLY this one for Rogers Canada. The internet.com apn doesn't work for me, fortunately I found this one that works!
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Problem still exists, any ideas?
Sent from my Sensation using XDA
here is the new straight talk apn's
name: straight talk
apn: tfdata
proxy: proxy.mvno.tracfone.com
port: 80
username: not set
password: not set
server: not set
mmsc: http://mms-cf.mec
mms proxy: mms3.tracfone.com
mms port: 80
mms protocol: wap 2.0
mcc: 310
mnc: 410
authentication type: not set
apn type: default,supl
i hope this is will help some of you.
thanks.......
Is this for t-mo or at&t SIM card? Any difference from the old apn as far as data speed.
Sent from my HTC One X using xda premium
I think you got it wrong, this is from the website, I tried them and they don't work for me and I assume the new apn's are for new sim cards and not one previously purchased that still need the old apn's
AT&T
FIELD SETTINGS
NAME straight talk
APN tfdata
PORT 80
MMSC http://mms-tf.net
MMS PROXY mms3.tracfone.com
MMS PORT 80
T-Mobile
FIELD SETTINGS
NAME straight talk
APN wap.tracfone
PROXY leave blank
PORT 8080
MMSC http://mms.tracfone.com
MMS PROXY leave blank
MMS PORT leave blank
This is the new APN for at&t HTC one x using straight talk. I just talked to straight talk earlier.
So which one is correct? I see the same one on the actual phone programming guide on their site.
clockcycle said:
So which one is correct? I see the same one on the actual phone programming guide on their site.
Click to expand...
Click to collapse
AT&T versus T-Mobile corresponds to which SIM you picked when you purchased the service. If you selected the AT&T SIM, then use the AT&T APN, etc.
clockcycle said:
So which one is correct? I see the same one on the actual phone programming guide on their site.
Click to expand...
Click to collapse
redpoint73 said:
AT&T versus T-Mobile corresponds to which SIM you picked when you purchased the service. If you selected the AT&T SIM, then use the AT&T APN, etc.
Click to expand...
Click to collapse
Sure that's great, but my question is which of the TWO AT&T APN posted in this thread are correct, OP or post #3?
I am getting throttled so bad
I just tried GA Buzz APN setting for ATT. It didn't work. I am sick of my data being so slow with the current one i have. HTC One X
clockcycle said:
Sure that's great, but my question is which of the TWO AT&T APN posted in this thread are correct, OP or post #3?
Click to expand...
Click to collapse
If you ask a question, it helps to speak in specifics. The guy who responded after you has the same problem, can't tell what APN he is talking about.
I personally would try the APN that came from the source (Straight Talk) first. But really, in the time you asked the question and waited for responses, you could have easily tried both (and then some) and see if they worked.
Sorry for being vague. I'm at work and trying to type fast. My problem is I get throttled often. My download speed is seriously 200k/ sec. I'm trying to find a better APN that maybe will help my situation. I have had this SIM card from ST for atleast a year. It is in my HTC One X. I cut the card down to fit. And don't get me wrong, sometimes i have decent speed. But it's never true 4g speed
Sent from my HTC One X using xda app-developers app
gerg6986 said:
here is the new straight talk apn's
name: straight talk
apn: tfdata
proxy: proxy.mvno.tracfone.com
port: 80
username: not set
password: not set
server: not set
mmsc: http://mms-cf.mec
mms proxy: mms3.tracfone.com
mms port: 80
mms protocol: wap 2.0
mcc: 310
mnc: 410
authentication type: not set
apn type: default,supl
i hope this is will help some of you.
thanks.......
Click to expand...
Click to collapse
Hey good looking out bro. These worked like a charm on my new SIM fro ST. Thanks again :good: