[ROM][DEC 8] Official RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1 STOCK ROOTED - Desire HD Android Development

Dear xda-members,
Hereby I present you the latest official HTC Desire HD rom wich is completely stock, I only rooted it and added superuser and busybox.
Warning: Your device must be rooted already, search forum on how to do this.
The ROM has been split into 2 parts, this is due to filesize upload limits on mediafire.
Please download both parts, then use 7-Zip to extract the ROM.
Download FULL STOCK Version Part.1
Download FULL STOCK Version Part.2
MD5 CHECKSUM: 090875E0EF0D797EA6ACB261A33DB4EE
howto flash: Perform a full wipe, then flash using ClockworkMod Recovery/4EXT Recovery
Download LITE Version Part.1
Download LITE Version Part.2
MD5 CHECKSUM: A8DF5F5A90CDC3999DA3043CE7C74E2F
List of removed bloatware apps
howto flash: Perform a full wipe, then flash using ClockworkMod Recovery/4EXT Recovery
After flashing the ROM it is advised to flash the RADIO aswell:
Download RADIO 12.65.60.29_26.14.04.28_M
MD5 CHECKSUM: B4CA54F2077C3366CD666E6471A2D04E
howto flash: Put PD98IMG.zip in root of sdcard, then poweroff your phone. Now poweron your phone while holding volume_down key,
then follow onscreen instructions.
Thanks to dsixda for his fabulous kitchen!
%battery mod by user ebguilbert
Please thank ebguilbert for this mod!
p.s. I have not tested this mod, so for support on this mod please pm ebguilbert. Thank you!
Edit 28/02/2012: Links updated

Thanks nitr00 nice Update

And we flash it in recovery mode right? then we flash radio img, isn't it?

mqazimi said:
And we flash it in recovery mode right? then we flash radio img, isn't it?
Click to expand...
Click to collapse
Thats correct, use with cwm to flash the zip.
Then to update the radio, put the PD98IMG.zip in the root of your sdcard and reboot your phone while push and hold the volume_down key.

1.Boot your phone in recovery mode (vol down + power)
2.Wipe data Factory Reset
3.Wipe Cache partition
4.Install Zip from SD card .... wait Finish
5.Restart
6.Boot your phone in recovery mode (vol down + power)
7.Install Radio Zip from SD card .... wait Finish
8.Restart

Guys,
I flashed the ROM but is not allowing me to update RADIO IMG.
It says: Installation aborted.
Any idea why?

I wanna know.. will flashing this ROM or the HTC shipped ROM with Sense 2.1 ...remove Eng S-Off and Radio S-Off ??

nitr00 Radio IMG.zip is not working.
However I flashed the ROM and restarted phone suddenly it works with the old RADIO.
Hope you do something to correct the technical mistake.
thnaks,

all is working just perfect, thanks a lot for the root!
mqazimi, the radio has to be flashed from stock recovery as PD98IMG.zip.. worked like a charm

Here is the Radio update in bootloader PD98IMG
http://www.4shared.com/file/Q4NeZZpU/pd98img-dhd-radio_12656029_261.html
Opps Thanks erfannorouzi

Pumpiron579 said:
Here is the Radio in flashable PD98IMG
http://www.4shared.com/file/Q4NeZZpU/pd98img-dhd-radio_12656029_261.html
Click to expand...
Click to collapse
PD98IMG not flashable it can update in bootloader not in recovery
just a tip
the name have to be PD98IMG.zip to bootloader detect that

md5 of radio?

Thanks for your work !
But why "Ultra Smooth Rosie 3.12.405.1 - v1.1" doesn't work ? (http://forum.xda-developers.com/showthread.php?t=1302914)

markmmxtech said:
md5 of radio?
Click to expand...
Click to collapse
b4ca54f2077c3366cd666e6471a2d04e

Do we need the new RIL with the Radio ? Or just flash the radio ?

Baarf said:
Thanks for your work !
But why "Ultra Smooth Rosie 3.12.405.1 - v1.1" doesn't work ? (http://forum.xda-developers.com/showthread.php?t=1302914)
Click to expand...
Click to collapse
I think this is because I did not deodexed/zip aligned the rom. This must be enabled in order to use mods and stuff, but for the sake of stock I have not altered these features.
Maybe I release a deodexed/zip aligned version, but perhaps it would be wise to use a custom/tweaked rom with all these features already enabled.

mjehan said:
Do we need the new RIL with the Radio ? Or just flash the radio ?
Click to expand...
Click to collapse
The radio and rom are a matched-pair released by HTC, so the matching RIL is already in the rom.

Is there anyone who can tell me what are the advanteges of using stock 3.0 ? Right now I use Runny3D V4.0 with Sense 3.5, and I flashed Amaze Camera 3.5. It has minor issues with camera but quite ok. I wonder how is the camera app in the stock 3.0. Does it have panaroma or HDR function? I would be happy if someone tell me those.
Thanks again

We don't lose root here do we?
Sent from my Desire HD using XDA App

It says ROOTED in big letters in the topic!
The advantage of a stock rom made for the phone is that usually there are no bugs and everything works as intended.
Sent from my HTC Desire HD A9191 using XDA App

Related

[ROM] [2.10.405.2] Rooted Official HTC Android 2.2 (FroYo) ROM

Hey there
This is the official HTC FoYo ROM. No apps removed, not deodexed, i only added root permissions and busybox.
Note: Your desire has to be rooted if you want to install this rom!
Facts:
The rom version is 2.10.405.2
This rom is rooted and includes busybox
This rom will NOT upgrade your HBOOT version.
This rom doesn't include a radio rom.
You have to install the radio rom seperately. ((Download radio rom) Guide how to install a radio rom)
The bootsound is disabled
Bash added
Installtion guide:
Boot in the recovery mode
Choose the option "install zip from sdcard"
take the radio rom and confirm
After flashing, do a reboot and unplug the usb cable
Now you have to wait 'til the phone's ready (don't touch it, just wait )
If this step was successful, reboot in the recovery mode
Choose the option "install zip from sdcard" and take the "Official_FroYo.zip"
Confirm and do afterwords a reboot
Download:
Multiupload download
Download older version:
Multiupload download
Green camera issue:
If you have problems with the market or your desire takes green pictures, download this zip and flash it (without wipe):
Download ZIP (thanks to liamstears )
Enjoy
For all those who want to force apps to be installed on sd-card, use the app called Mod Install Location. It can be installed through Android Market. Dont forget to move all widgets to phone, otherwise they will make some trouble.
What about hboot
of course no hboot update
Which radio comes with this?
Nice juan.
thanks for this!
So i just use the latest radio + this rom?
nickiberli said:
of course no hboot update
Click to expand...
Click to collapse
Nice, will flash after downloading... Thanks
Maybe you can update your opening post with more details (radio, hboot, install info etc). Thanks in advance.
thanks for this , just what i wanted
Which radio versão to use?
Sent from my HTC Desire using XDA App
Will I need to update the radio separately?
Anybody tried it ?
Everything is ok with this room ?
Can someone report FPS for 720p recording please?
retrodreamer said:
Will I need to update the radio separately?
Click to expand...
Click to collapse
Yes you will...
could you post a link to the new radio?
could you upload to mediafire? rapidshare is terrible i dont know why people still use it
thanks v much for this
Does this rom work correctly?
Please add another mirror, 500KB/s from ****ing rapidshare .
TankMaster said:
Does this rom work correctly?
Click to expand...
Click to collapse
I flashed it and it works perfectly (for me)
@cgrec92: I've added link to the radio rom
I will upload it to multiupload, if i have rebooted my pc
TankMaster said:
Does this rom work correctly?
Click to expand...
Click to collapse
Too soon to say i think,
Still downloading for me.
Downloading! Thanks a lot.

[Q] HELP!!! HTC sensation bricdked!

I was trying to update to Android Revolution HD 3.6.13 and in the process after installing PG58IMG the phone keeps restarting on bootloading htc screen. When I tried to access the boatloader I found Revolutionary recovery v5.0.0.8 is only there. Factory reset is also not working.
Please guys, help me to fix this. I just bought the cell couple of days back. Drving me crazy... Please somebody reply now...
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1192300
Boot into the recovery mode, mount USB storage, copy the Rom onto your sdcard then flash the Rom
ziaulh.ch said:
I was trying to update to Android Revolution HD 3.6.13 and in the process after installing PG58IMG the phone keeps restarting on bootloading htc screen. When I tried to access the boatloader I found Revolutionary recovery v5.0.0.8 is only there. Factory reset is also not working.
Please guys, help me to fix this. I just bought the cell couple of days back. Drving me crazy... Please somebody reply now...
I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1192300
Click to expand...
Click to collapse
does the firmware for the rom fits the one u installed 3.24/3.25 firmware it doesnt work with GB 1.17 will by my knowledge
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
find the firmware fitting the rom that i can already advise you
edit: wow posts popped up by the time i finished. if this is a dupe, my bad
from that same thread
B]To install a Custom ROM - (need to wipe)
1. Download your chosen ROM by other developers in the development threads and copy the ZIP file to your SD Card ROOT directory
delete the PD58IMG file
2. Start clockworkmod recovery (instructions above) REMOVE BATT. INSERT BATT
VOL DWN + PWR
goes into bootloader, by this time you have removed the pd58img file. select recovery
first wipe data then cache.
4. Navigate to "install zip from sdcard" using the Volume Down button and press select (power button to select)
5. Then select "Choose zip from sdcard" (pic a popular one that way u have support.)
6. Then select "your_chosen_rom.zip"
7. Then select "Yes - install your_chosen_rom.zip" to confirm
8. Then go back
9. Then reboot.
10. First boot will take quite some time -This is normal, i know you want touch your nice shiny phone but BE PATIENT - ENJOY!
if i missed anything pls add, thx also thank viper for the guide
Oomike said:
edit: wow posts popped up by the time i finished. if this is a dupe, my bad
from that same thread
B]To install a Custom ROM - (need to wipe)
1. Download your chosen ROM by other developers in the development threads and copy the ZIP file to your SD Card ROOT directory
delete the PD58IMG file
2. Start clockworkmod recovery (instructions above) REMOVE BATT. INSERT BATT
VOL DWN + PWR
goes into bootloader, by this time you have removed the pd58img file. select recovery
first wipe data then cache.
4. Navigate to "install zip from sdcard" using the Volume Down button and press select (power button to select)
5. Then select "Choose zip from sdcard" (pic a popular one that way u have support.)
6. Then select "your_chosen_rom.zip"
7. Then select "Yes - install your_chosen_rom.zip" to confirm
8. Then go back
9. Then reboot.
10. First boot will take quite some time -This is normal, i know you want touch your nice shiny phone but BE PATIENT - ENJOY!
if i missed anything pls add, thx also thank viper for the guide
Click to expand...
Click to collapse
only thing you have to wait for is the little box that here says it needs to optimize my 277 apps wich at fresh boot takes my phone to do in a normal period i usually insert my pin-code
---------- Post added at 12:53 AM ---------- Previous post was at 12:48 AM ----------
dmcb123 said:
Boot into the recovery mode, mount USB storage, copy the Rom onto your sdcard then flash the Rom
Click to expand...
Click to collapse
you can bootloader as well
to use cmd go into bootloader(screen when hold vol - + power) then just click power 1 time
then typin cmd: [command] adb push your-rom.zip /sdcard
note that the rom must be in same folder as adb
or use the flash command with adb wich im very sorry for that i forgot
Alienator9191 said:
does the firmware for the rom fits the one u installed 3.24/3.25 firmware it doesnt work with GB 1.17 will by my knowledge
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
find the firmware fitting the rom that i can already advise you
Click to expand...
Click to collapse
I installed VODAP001 but am not sure whether I have choosen the right one between 3.24/3.12. I installled 3.24. Hoe do I know which rom I have?
Alienator9191 said:
does the firmware for the rom fits the one u installed 3.24/3.25 firmware it doesnt work with GB 1.17 will by my knowledge
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
find the firmware fitting the rom that i can already advise you
Click to expand...
Click to collapse
I installed VODAP001 but am not sure whether I have choosen the right one between 3.24/3.12. I installled 3.24. Hoe do I know which rom I have?
I tried to mount the Sd but it says error mounting SD!!!!!
ziaulh.ch said:
I installed VODAP001 but am not sure whether I have choosen the right one between 3.24/3.12. I installled 3.24. Hoe do I know which rom I have?
I tried to mount the Sd but it says error mounting SD!!!!!
Click to expand...
Click to collapse
i checked u have a gb rom wich needs firmware package 1.17 ill give u the download link :
http://goo.gl/muOkj
put it on root of your sd and go into BOOTLOADER
it will upadte automaticly do not flash
flash rom after downgrade again wipe data chash davlik and you should be good to go otherwise try ARHD 4.1.13 i used it with the 1.17 firmware and it worked
Alienator9191 said:
i checked u have a gb rom wich needs firmware package 1.17 ill give u the download link :
http://goo.gl/muOkj
put it on root of your sd and go into BOOTLOADER
it will upadte automaticly do not flash
flash rom after downgrade again wipe data chash davlik and you should be good to go otherwise try ARHD 4.1.13 i used it with the 1.17 firmware and it worked
Click to expand...
Click to collapse
Thanks very much dude! It worked. I want to upgrade to ARHD 4.1.13... What should I do?
ziaulh.ch said:
Thanks very much dude! It worked. I want to upgrade to ARHD 4.1.13... What should I do?
Click to expand...
Click to collapse
download it here:
http://goo.gl/7ZC2P
do a nandroid (backup rom etc)
flash and wipe data cash davlik
no beats! download beats for ur phone here:
http://forum.xda-developers.com/showthread.php?t=1363882
fresh rom 2.3.5 GB+sense 3.5
or
ICS:
http://goo.gl/ZJghK
firmware:
http://goo.gl/HWJJh
do a nandroid
flash and wipe data cash davlik
with beats but still can edit by this:
http://forum.xda-developers.com/showthread.php?t=1363882
fresh ICS 4.0.3 sensse 3.6
update for ICS is expected tomorrow so be sure to keep an eye open on the thread:
http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
---------------------------------------------------------------------------------------------------------------------------
pls share experience
Alienator9191 said:
download it here:
http://goo.gl/7ZC2P
do a nandroid (backup rom etc)
flash and wipe data cash davlik
no beats! download beats for ur phone here:
http://forum.xda-developers.com/showthread.php?t=1363882
fresh rom 2.3.5 GB+sense 3.5
or
ICS:
http://goo.gl/ZJghK
firmware:
http://goo.gl/HWJJh
do a nandroid
flash and wipe data cash davlik
with beats but still can edit by this:
http://forum.xda-developers.com/showthread.php?t=1363882
fresh ICS 4.0.3 sensse 3.6
update for ICS is expected tomorrow so be sure to keep an eye open on the thread:
http://forum.xda-developers.com/showpost.php?p=14192842&postcount=4
---------------------------------------------------------------------------------------------------------------------------
pls share experience
Click to expand...
Click to collapse
I am a little confused about how to update the ROM. Is it simply loading on boatloader and install the zip?
ziaulh.ch said:
I am a little confused about how to update the ROM. Is it simply loading on boatloader and install the zip?
Click to expand...
Click to collapse
the PG58IMG needs to be in root of sd then boot by bootloader let it update then remove it from sd by sd reader plugged into pc then rom in root flash it and you get the rom working
MAKE SURE FIRMWARE AND ROM MATCH
1.17 GB roms
3.24 ICS roms
how did it go?
Hey look up mikes rom he posted a update 6.3.0 do remeber u need the new firmware
Firmware:
http://goo.gl/jL70w
Rom (xe version non xe not uploaded yet, so beats is included):
http://goo.gl/qgKDD
follow me on twitter
@Alienator9191

[A700] [HowTo] Update German Version to JB

Hi!
Just found a way to update to JB from the 1.053 version (Acer_AV043_A700_RV22RC03_EMEA_DE) on wich every other update failed for me. But runs with the other versions, too.
Unlock Bootloader
Install CWM (6.0.1.4)
Visit this german forum
get the file A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip
flash it via CWM
DONE!
Just tested and it's working.
Credits go to those who deserve it.
I deleted CWM and a mate let it where it was and both A700 are running fine [*] (see below!)
... now waiting for root
----------------------------
[*] New info:
My friend, who kept CWM, unlocked the bootloader again after the update and now has a bootloop. So my advice is to kill CWM after the update.
I don't get into recovery too (with locked bootloader) it says "recovery image verified failed". But system starts normally afterwards.
------------------
More info:
I had CWM on the tab too, because i misunderstood the question:
When asked
Code:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
say NO! to kill CWM.
------------------
Still more info to come:
(4.10.2012)
The bootloop was fixed by flashing a propriate recovery after beeing able to enter fastboot using the right key combination.
andiby left us a JB stock recovery: recovery.img and he build a CWM 6.0.1.4 with JB Kernel: recovery-a700-6014JB.img which runs fine for me.
Use the CWM with JB Kernel only to flash files and not to WIPE, FORMAT or RESTORE a backup, because there were issues with a different JB based CWM and I can't guarantee this one to work, because I have not tested it.
I'm on FR Firmware, can you tell me how should I proceed?
If you want to keep the FR firmware you will have to wait for an appropriate update file.
If you want to switch to Germen I think it should work with this method, because the zip file contains everything from bootloader to system files.
Do you think I can here: https://app.dumptruck.goldenfrog.com/p/GOKKb2PavJ download an install then install Acer_A700_AV043.RV07RC03_AV043.RV07RC06_EMEA_DE thereafter this here JB?
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
I think you only need the file from my post, because there is everything in it fpr JB afaik, but I can give no guarantee, because I only used it to update my German version.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my request.
DЯΦ[email protected]П said:
I would not recommend it, because your file is only 340 MB while the one from the thread above is nearly 400 MB.
PS: Might it be posible to reduce the size of your signature a bit? Threads are much more difficult to read if a signature is almost always larger than a normal post. Thank you to give consideration to my wish.
Click to expand...
Click to collapse
Yes but i can from FR Firmware to DE and install first update (5MB) and this is 1.053 => finally JB or i think wrong?
PS: Nope. These are my projects
update or flash total
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
elunico32 said:
Is it an upgrade or full flash?
Did you delete all data you had or upgrade your system?
Click to expand...
Click to collapse
It's an update. Everything is on the tab as before.
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Thank
Thank you. I will flash now.
DЯΦ[email protected]П said:
@DakiX: all I can say is that I would not recommend using this method with any other file than the one mentioned in the first post, because this is the one I tested.
Click to expand...
Click to collapse
You don't understand me what i mean. I will flash the DE Firmware afterthat 1.053 und then the JB!
Are you from germany?
DakiX said:
You don't understand me what i mean.
Click to expand...
Click to collapse
Maybe ...
I will flash the DE Firmware afterthat 1.053 und then the JB!
Click to expand...
Click to collapse
I just don't get why you want to flash anything else before the "A700 JB Full ROM AV051_1.028.00_EMEA_DE RV09RC02.zip" because it is a FULL ROM and should be flashable over ICS 1.023, ICS 1.027, ICS 1.053 and ICS 1.055 to get JB 1.028.
Are you from germany?
Click to expand...
Click to collapse
My flag says: yes
You have a PM
Works great ! Thanks !
But for me, recovery 6.0.1.4 is KO after the update. I need to use the one with "the brick bug". Not good at all
I will wait for Pawitp before using it...
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
DakiX said:
ROM may flash stock recovery on boot. Fix?
No
No
No
Yes - Disable recovery flash
Yes or no?
Click to expand...
Click to collapse
I disabled it, then CWM is away and the Tab as stock as possible.
A friend kept CWM and now has some issues...
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
DakiX said:
HOLY *%/***** i had FR Firmware and i do this:
download jb
move to sd
unlock bootloader
root with patched-boot
flash cwm
reboot to recovery
install jb..
yes disable recovery..
reboot system now & FINALLY JELLY BEAN :good: oh my... its very fast + smooth and equal to another tablet!
I hate to root and flash 10 inch tablets - i'm am smartphone fetishist
Click to expand...
Click to collapse
Can you get into recovery mode using "adb reboot recovery"?
Nope.. failed but its understandable because CWM must be made for 4.1.1
DakiX said:
Nope.. failed but its understandable because CWM must be made for 4.1.1
Click to expand...
Click to collapse
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
DЯΦ[email protected]П said:
But you kicked CWM and should have stock recovery now. Thats what you did by sayin "yes" or am i completely wrong?
Click to expand...
Click to collapse
Yes i disable it. I can in stock recovery but CWM is gone^^ that i mean :highfive:

[ROM][29 JUL] Stock (no root) Odexed M7UL 2.24.707.1 [SENSE][4.2.2][GSM/LTE]

This is the stock M7UL HTC__044 2.24.707.1 ROM including /data/preload.
Details:
-HTC__044 4.2.2 ROM
-2.24.707.1
-Stock (not rooted)
-Odexed
-Includes /data/preload apps
Flash it with TWRP or CWM:
-Reboot into TWRP or CWM Recovery
-Wipe Data (Factory reset), Cache, and System.
-Select ZIP and flash.
Thanks dsixda for Android-Kitchen. It is great!
Thanks tmlhodge. I borrowed your updater-script.
I’m not responsible for any issues you may have when flashing this ROM. Please do your research and be careful.
Downloads:
<ROM>
MEGA Link:
https://mega.co.nz/#!uwBgXbBI!C-UUP0mV5oOLy5lIk6mboRzufGV8klCSp2He4YhwCEg
Md5 Link:
https://mega.co.nz/#!3owD1IjL!ItsFKy5shN69Cg785dHG5gcjpYZEiuPq6hogQ_eAuks
<RECOVERY>
MEGA Link:
https://mega.co.nz/#!W9ACgBDY!BJvV7B3UZXIGjXLYW2N13XLqggR6HL_qWT6-70n5VcQ
Md5 Link:
https://mega.co.nz/#!75YjHbDD!UDwd01ZZSyjXYAx9_qUBZ1soxylFkSe3wKI2Ce5AnpM
You can find the latest 4.2.2 (HTC__044) firmware here:
http://pan.baidu.com/share/link?shareid=1309487477&uk=1309003712
alasdair.grant said:
I think that this thread should be in “One Android Development” but I can’t create a thread there. Sorry.
This is the stock M7UL HTC_044 2.24.707.1 ROM including /data/preload.
Details:
-HTC_044 4.2.2 ROM
-2.24.707.1
-Stock (not rooted)
-Odexed
-Includes /data/preload apps
Flash it with TWRP or CWM:
-Reboot into TWRP or CWM Recovery
-Wipe Data (Factory reset), Cache, and System.
-Select ZIP and flash.
Thanks dsixda for Android-Kitchen. It is great!
Thanks tmlhodge. I borrowed your updater-script.
I’m not responsible for any issues you may have when flashing this ROM. Please do your research and be careful.
Downloads:
I'm not allowed to post links yet... Please replace all "DOT" with "."
Please replace all "COLON" with ":"
<ROM>
MEGA Link:
https://mega.co.nz/#!uwBgXbBI!C-UUP0mV5oOLy5lIk6mboRzufGV8klCSp2He4YhwCEg
<RECOVERY>
MEGA Link:
https://mega.co.nz/#!W9ACgBDY!BJvV7B3UZXIGjXLYW2N13XLqggR6HL_qWT6-70n5VcQ
You can find the latest 4.2.2 (HTC_044) firmware here:
http://pan.baidu.com/share/link?shareid=1309487477&uk=1309003712
Click to expand...
Click to collapse
Thank u . This is the SEA singapore/malaysia rom Version
Does the rom contain the firmware or have u removed it?
I have corrected the links for u with clickable ones.. As above.
Those who want to download , just click on the quote above
NOTE: that the firmware file in Original post is a full version, not a custom one . Flashing the firmware will result in loss of root
Here are 2 files, Choose one to flash , not both
If u flash this
2.24.707.1-custom firmware.zip
yr S-off , custom recovery and still Hboot 1.44 intact, u can use revone
on this. If u are already S-off , rooted and want to just upgrade the firmware flash this
If u flash this :
2.24.707.1-Unmodified firmware.zip
Yr S-off may be gone but u cannot use revone commands anymore . Hboot will be upgraded to 1.54 , custom recovery will be removed and potential problems later one . Flash this if u want just like the Stock OTA upgrade
---------- Post added at 05:07 AM ---------- Previous post was at 05:00 AM ----------
Explanation for the above: Generally U need to remove 3 things if u want to flash firmware on S-off phone
Boot.img - Kernel ( this is stock kernel ) remove if u are on custom rom
recovery.img ( HTC recovery) remove if u ant yr TWRP or CWM intact
Hboot ( remove if u want to keep yr phone Unlocking bootloader ability )
---------- Post added at 05:10 AM ---------- Previous post was at 05:07 AM ----------
cristian2206 said:
so to be clear...i can remove hboot and recovery ? do i have to edit the .txt file after i remove those 2 .img?
edit: i flashed 2.24.401 and i dont have a recovery now
Click to expand...
Click to collapse
robstunner said:
I'm not seeing a custom 2.24 firmware, unless you either flashed the wwe version or the only custom in op which is 2.17
Click to expand...
Click to collapse
cristian2206 said:
2.17.401.1 has proximity sensor issues that's why I flash 2.24 but I forgot about hboot and it updated to 1.54. Can I flash RUU now to go back to 4.1 with hboot 1.54?
Click to expand...
Click to collapse
TO all noobs
first u need super CID 11111 to flash any region firmware or custom firmware not intended for yr device
remove these files from any downloaded firmare.zip if u find them inside
Boot.img - Kernel ( this is stock kernel ) remove if u are on custom rom
recovery.img ( HTC recovery) remove if u want yr TWRP or CWM intact
Hboot ( remove if u want to keep yr phone Unlocking bootloader ability )
Firmware not in ROM
Magpir said:
Thank u . This is the SEA singapore/malaysia rom Version
Does the rom contain the firmware or have u removed it?
I have corrected the links for u with clickable ones.. As above.
Those who want to download , just click on the quote above
NOTE: that the firmware file is a full version, not a custom one . Flashing the firmware will result in loss of root
Click to expand...
Click to collapse
Thanks for fixing the links. No the firmware is not included in the ROM. It only has boot.img, /system and /data/preload. The firmware will need to be flashed separately using fastboot oem rebootRUU. The firmware can be extracted from the OTA firmware.zip or the link above. I'd remove hboot from the firmware as well. 1.54 hboot is a problem. Haha.
alasdair.grant said:
Thanks for fixing the links. No the firmware is not included in the ROM. It only has boot.img, /system and /data/preload. The firmware will need to be flashed separately using fastboot eom rebootRUU. The firmware can be extracted from the OTA firmware.zip or the link above. I'd remove hboot from the firmware as well. 1.54 hboot is a problem. Haha.
Click to expand...
Click to collapse
yes , thats what i meant. The rom should not contain recovery or Hboot or any firmware files
BTW if yr recovery is already TWRP, after flashing this rom , TWRP will automatically install the root access for u
Anyway this rom is supposed to be GSM/LTE. Cause phones with 707 region are LTE phones
So try changing the title
Magpir said:
yes , thats what i meant. The rom should not contain recovery or Hboot or any firmware files
BTW if yr recovery is already TWRP, after flashing this rom , TWRP will automatically install the root access for u
Anyway this rom is supposed to be GSM/LTE. Cause phones with 707 region are LTE phones
So try changing the title
Click to expand...
Click to collapse
Title changed. Thanks for the heads up. 1800 LTE works great.
alasdair.grant said:
Title changed. Thanks for the heads up. 1800 LTE works great.
Click to expand...
Click to collapse
any problems with the rom??
Magpir said:
any problems with the rom??
Click to expand...
Click to collapse
I have experienced no problems. It works fine for me.
will try out soon
Great to see someone posting this..I have been searching for the firmware..
Btw..if I'm on a custom Rom, can I flash the firmware? I suppose it will only update my firmware and radio right?
Sent from my HTC One using xda app-developers app
Changelog?
This is a stock Rom...
---------- Post added at 02:00 AM ---------- Previous post was at 01:58 AM ----------
randykzc said:
Great to see someone posting this..I have been searching for the firmware..
Btw..if I'm on a custom Rom, can I flash the firmware? I suppose it will only update my firmware and radio right?
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
No . This firmware is the full version. I stated earlier ... It will result in loss of root .. u need to remove the boot.omg, recovery.ing and hbootbya.img before flashing
I have posted a custom version of this firmware in #2 post of this thread
updated my 2nd post.....
just to confirm, if i'm currently on CWM touch and ARHD and would like to get back to stock recovery and stock ROM
i just need to download the 2 files quoted by Magpir and flash them using the following instructions?
Download stock odexed version of most recent firmware and recovery.img
Move recovery.img to c:\mini-sdk location
Boot your device in recovery mode (power off the device and turn it on using power + vol down buttons and select "RECOVERY")
In main menu, select "install zip from sdcard" and "choose zip from sdcard".
Navigate to the location of stock ROM (zip) package and confirm flashing procedure.
After flashing process is complete, reboot the device in bootloader mode.
Connect your device to the PC
Boot your device in fastboot mode (like you did during unlocking bootloader - power off the device and turn it on using power + vol down buttons and select "FASTBOOT")
Open up command prompt ( Start > Run > type cmd and hit enter ). The window that appears is called Command Prompt. <click here to see the image>
Navigate to where you unzipped "mini-sdk" package (type in Command Prompt: cd c:\mini-sdk). Note: make sure the path is not c:\mini-sdk\mini-sdk
In the Command Prompt type following command: fastboot flash recovery recovery.img
You have now stock boot, system and recovery partitions. Time to relock your bootloader.
In the Command Prompt type following command: fastboot oem lock.
Click to expand...
Click to collapse
youngboy99 said:
just to confirm, if i'm currently on CWM touch and ARHD and would like to get back to stock recovery and stock ROM
i just need to download the 2 files quoted by Magpir and flash them using the following instructions?
Click to expand...
Click to collapse
Read my instructions carefully
choose only one of the files. NOT BOTH!
modified firmware - preserves yr root and compatibility with Revone
Unmodified - U want to Stock everything including recovery, bootloader and of course yr root and revone compatibility gone
Magpir said:
Read my instructions carefully
choose only one of the files. NOT BOTH!
modified firmware - preserves yr root and compatibility with Revone
Unmodified - U want to Stock everything including recovery, bootloader and of course yr root and revone compatibility gone
Click to expand...
Click to collapse
yeah, i was referring the 2 as the stock rom and stock recovery
my bad for not being clear enough :laugh:
I cant seem to download it stops halfway
Can the op provide a mirror
to OP please provide a mirror, i cant download the whole rom fully
Uploading
Magpir said:
to OP please provide a mirror, i cant download the whole rom fully
Click to expand...
Click to collapse
The Mega link works fine for me. I'm not sure why you are having problems. I know Mega is picky when it comes to browsers...
I am uploading to dropbox and drive now. I hope the uploads will finish by tomorrow my time (GMT+10).
Its included a 4G LTE ???
Sent from my One using xda app-developers app
Yes has 4G/LTE
@me said:
Its included a 4G LTE ???
Sent from my One using xda app-developers app
Click to expand...
Click to collapse
Yes. 1800 and 2600 MHz are supported by the HTC__044 M7UL model.

[Q] CM 11 installed succesfully but not booting showing white screen with htc logo

CM 11 installed succesfully but not booting showing white screen with htc logo ..
initially i rooted my device , by htc dev , unlocked bootloader and rooted)
and then installed cm 7.2.0 saga.zip
and then nw i wanna install cm 11 .. it is showing that installed succesfully , and i rebboted my device , it is stuck at htc white screen logo :crying:
i waited for half an hour bt still its at white screen ..
i followed crct procedure for installation ..
same hapnd wen i installed cm 9 , cm 10.1, cm 10.2
please help me THANK U IN ADVANCE ..
ANY HELP WiLL BE GREATLY APPRECIATED >>> THANK U >>> FINALLY KEPT CM 7.2
bt i wanna USE KITKAT >> PLEASE HELP ME
DETAILS :
DESIRE S , S-On , UNLOCKED BOOTLOADER
HBOOT: 2.000.2
CUSTOM RECOVERY : 4EXT RECOVERY rc 1 , tried cwm and twrp and all ... found this as best ..
CUSTOM ROM at present : cm 7.2 nightlies ...
ANY HELP WiLL BE GREATLY APPRECIATED >>> THANK U >>> FINALLY KEPT CM 7.2:crying::crying::crying::crying::crying::crying:
you are s-on so you have to frash boot.IMG separately
Sent from my HTC Desire S using XDA Free mobile app
yA am S-on ...
toni_mon said:
you are s-on so you have to frash boot.IMG separately
Sent from my HTC Desire S using XDA Free mobile app
Click to expand...
Click to collapse
ya am s-on tanx fr fast reply .. ! and i had seen some devices with s-on also has kitkat installed ..
REPLY PLEASE >>> WAITiNG FOR RepLY
TANX IN aDVANCE ..
AND COULD U ELABORATE WAT FLASH BOOT>IMG SEPARAtely MEANS
I JUST FLASH THE ROM USING 4EXT TOUCH RECOVERY RC 1
AND REBOOT IT STUCKS AT WHITE SCREEN .. I TRIED WHING DALIVIK CACHE TOO SAME THING HAPPENED ...WAT TO DO ..
THANKS IN ADWANS ..
I THANKED U ... WITH THANK BUTTON ..
It yes there are some 4.4 roms for HTC desire s, they are alpha or beta versions don't expect them to be stable, you can try if you want...
Sent from my HTC Desire S using XDA Free mobile app
Akhil Mukkamala said:
ya am s-on tanx fr fast reply .. ! and i had seen some devices with s-on also has kitkat installed ..
REPLY PLEASE >>> WAITiNG FOR RepLY
TANX IN aDVANCE ..
AND COULD U ELABORATE WAT FLASH BOOT>IMG SEPARAtely MEANS
I JUST FLASH THE ROM USING 4EXT TOUCH RECOVERY RC 1
AND REBOOT IT STUCKS AT WHITE SCREEN .. I TRIED WHING DALIVIK CACHE TOO SAME THING HAPPENED ...WAT TO DO ..
THANKS IN ADWANS ..
I THANKED U ... WITH THANK BUTTON ..
Click to expand...
Click to collapse
STOP SHOUTING! and read the post above, that is the solution, everyone who's still s-on needs to do that, it's well documented in this forum. Search, read. If that's too much for you, you shouldn't have messed with your phone in the first place.
teadrinker said:
STOP SHOUTING! and read the post above, that is the solution, everyone who's still s-on needs to do that, it's well documented in this forum. Search, read. If that's too much for you, you shouldn't have messed with your phone in the first place.
Click to expand...
Click to collapse
Hi guys,
I'm experiencing the same issue with cm-11-20140614-UNOFFICIAL-saga from devil-kin. Even after I manually flash the boot.img file (fastboot flash boot boot.img) the phone just resets back into recovery, which I do find strange. Using the latest 4EXT recovery and latest version of Hboot.
xDTrifonov said:
Hi guys,
I'm experiencing the same issue with cm-11-20140614-UNOFFICIAL-saga from devil-kin. Even after I manually flash the boot.img file (fastboot flash boot boot.img) the phone just resets back into recovery, which I do find strange. Using the latest 4EXT recovery and latest version of Hboot.
Click to expand...
Click to collapse
Where did you get the boot.img from?
Sent from my Desire S using XDA Free mobile app
xDTrifonov said:
Hi guys,
I'm experiencing the same issue with cm-11-20140614-UNOFFICIAL-saga from devil-kin. Even after I manually flash the boot.img file (fastboot flash boot boot.img) the phone just resets back into recovery, which I do find strange. Using the latest 4EXT recovery and latest version of Hboot.
Click to expand...
Click to collapse
Do you know which panel type you have? Have you had a jb / kk rom booting OK on your phone before?
Edit: check this thread about panel type:
http://forum.xda-developers.com/showthread.php?t=1943524
toni_mon said:
Where did you get the boot.img from?
Sent from my Desire S using XDA Free mobile app
Click to expand...
Click to collapse
I used the one included in the .zip file with the ROM.
---------- Post added at 08:57 PM ---------- Previous post was at 08:46 PM ----------
teadrinker said:
Do you know which panel type you have? Have you had a jb / kk rom booting OK on your phone before?
Edit: check this thread about panel type:
http://forum.xda-developers.com/showthread.php?t=1943524
Click to expand...
Click to collapse
1) I used Fallout v5.0 and it's working just fine
2) My panel is made by Sony
And you formatted all partitions (except sd card) before installing? Also what version of 4ext do you have exactly?
Edit: fallout is ics (Android 4.0), not jb (Android 4.1-4.3) or kk (Android 4.4)
teadrinker said:
And you formatted all partitions (except sd card) before installing? Also what version of 4ext do you have exactly?
Edit: fallout is ics (Android 4.0), not jb (Android 4.1-4.3) or kk (Android 4.4)
Click to expand...
Click to collapse
1) Formatted everything possible except the SD card, before flashing the CM11 ROM
2) 4EXT v2.2.7_RC5 (I tried the latest RC Touch version but no luck there)
3) Hboot 7.00.1002 | Reengineered 2.00.002
Let me know if you need more info to help me out here, because I'm really out of options at this point and I'm stuck with Fallout. Not that it's bad but I found some stuff from the HTC part that drive me crazy + a lot of BGround activities so I had to disable some of the apps.
xDTrifonov said:
1) Formatted everything possible except the SD card, before flashing the CM11 ROM
2) 4EXT v2.2.7_RC5 (I tried the latest RC Touch version but no luck there)
3) Hboot 7.00.1002 | Reengineered 2.00.002
Let me know if you need more info to help me out here, because I'm really out of options at this point and I'm stuck with Fallout. Not that it's bad but I found some stuff from the HTC part that drive me crazy + a lot of BGround activities so I had to disable some of the apps.
Click to expand...
Click to collapse
Try twrp 2.7.1.0
Sent from my Desire S using XDA Free mobile app
Try to update 4ext to latest recovery 1.0.0.6 touch, because you cannot install KK with old one.
Sent from my HTC Desire S
bomil said:
Try to update 4ext to latest recovery 1.0.0.6 touch, because you cannot install KK with old one.
Sent from my HTC Desire S
Click to expand...
Click to collapse
I do not know how to work with the Touch version, as it's something that is working while you have a working Android, but when I flash a new one and then the new boot how should I do this?
Is there a guide on how to? (using the touch version of 4EXT)
Latest 4ext recovery and twrp have support for selinux which is needed for flashing KK, and they are both touch. Try on youtube to find some tutorial.
Sent from my HTC Desire S
xDTrifonov said:
I do not know how to work with the Touch version, as it's something that is working while you have a working Android, but when I flash a new one and then the new boot how should I do this?
Is there a guide on how to? (using the touch version of 4EXT)
Click to expand...
Click to collapse
Instead of using volume keys and power key you will yse your touchscreen, and flashing a recovery and boot.img will be the same as withyour old recovery....
Sent from my Desire S using XDA Free mobile app
toni_mon said:
Instead of using volume keys and power key you will yse your touchscreen, and flashing a recovery and boot.img will be the same as withyour old recovery....
Sent from my Desire S using XDA Free mobile app
Click to expand...
Click to collapse
Sorry but it still want's to restart into the old recovery and then proceed with the new flash of the ROM. I'm out of guesses on how to use this app. Without a guide I'm lost.
I now saw that I got an Error | status7 Installation aborted. - what could that be?
Status 7 error is due to the recovery being too old.
please
teadrinker said:
Status 7 error is due to the recovery being too old.
Click to expand...
Click to collapse
Could some one make a quick guide on the steps that we need to make in order to install a ROM with the touch version of 4EXT? I know that for some of you guys this will be like.. a small thing to do, but having something to follow and knowing which option to choose is very helpful and will help a lot of people.
xDTrifonov said:
Could some one make a quick guide on the steps that we need to make in order to install a ROM with the touch version of 4EXT? I know that for some of you guys this will be like.. a small thing to do, but having something to follow and knowing which option to choose is very helpful and will help a lot of people.
Click to expand...
Click to collapse
To make nandroid backup
1) boot recovery
2) backup/restore
3) backup (select it to backup)
Thats u done.
To flash a rom
1) wipe/format
2) format all partitions except sdcard
(Once thats done go back to main menu)
3) install from sdcard
4) choose zip from sdcard
5) select ur rom to install it
(if rom requires u to flash gapps then do it straight after u flash the rom)
6) reboot
(if ur s-on then ul need to boot straight into fastboot after u flash the rom and flash the boot.img)
Hope that helps ya. Simples really.

Categories

Resources