Database Info

Stuck at Motorola screen, cant reload tiamat

I had successfully unlocked and rooted my xoom via the once click program.
I made a new lock icon and replaced the framework-res.apk, rebooted so the new icon would show.
It failed to reboot, it got stuck at M screen.
Power+VolUP = RSD Support 3
Power+VolDOWN = Starting Fastboot support
What do I do to get my xoom back?
Any help would be greatly appreciated.

Root it again using the one click. I had the same problem replacing framework. I ran the one click again and it worked
Sent from my Xoom using XDA App

One click says it cannot find a device, going to try to flash a stock img.

This thread solved my problem,
http://www.xoomforums.com/forum/mot...99-how-restore-wifi-only-system-boot-img.html
Lock please

Reinstall motor driver worked for me I had to do that
UnMonk said:
One click says it cannot find a device, going to try to flash a stock img.
Click to expand...
Click to collapse
sent from my evo

[Q] Stuck at recovery mode.

I recently got a 4g in replacement for free for my vibrant from tmobile, so I hacked it as soon as I could get the chance, I was running a GB rom and it wasn't running as smooth as I liked so I attempted to go back to stock via hemdall, couldn't get it to work since I never used it before, I tried reading the forum but I just couldn't figure it out, so I tried to odin, my phone freaked out and for about 30 minutes just was a black screen, I was able to get to recovery mode after l several attempts..I am now in recovery and only have to option to reboot, re install, delete all user data, delete all cache, I have tried every trick in the forum to get to download mode, everything I do just goes straight back to recovery, I tried to rename a stock rom to update.zip and flash that through the re install packages and it says signature verification failed..What the heck do I do to get my phone either to odin, and if I do what do I do after odin, I thought I knew but apparently not, secondly if I can get to odin what is my best bet on fixing it? Thanks all who shall help!

There are tons of threads in the Dev section about getting back to stock. With way... you need to get into download mode.
Sent from my SGH-T959V using XDA App

AdamOutler posted a one click back to stock using hemdall in the dev section.
Sent from my SGH-T959V using XDA App

That's the thing I can not get into download mode, I've done every download thing on the the forum and it just goes into recovery mode...

Michaelk706 said:
That's the thing I can not get into download mode, I've done every download thing on the the forum and it just goes into recovery mode...
Click to expand...
Click to collapse
Go to www.android.com, download the software development kit (SDK), install it, only install the 'tools' when it prompts you for what to install.
Once that is done open a command prompt, cd to the "platform-tools" directory where the SDK installed, and issue this command:
adb reboot download

stephen_w said:
Go to www.android.com, download the software development kit (SDK), install it, only install the 'tools' when it prompts you for what to install.
Once that is done open a command prompt, cd to the "platform-tools" directory where the SDK installed, and issue this command:
adb reboot download
Click to expand...
Click to collapse
Already did, and just right back to recovery mode..

I'm sure you've tried this, but I have to ask - what happens when you use the options you have in recovery mode?
Sent from my SGH-T959V using XDA App

It just goes back to recovery..

When you tried using adb to reboot it into download mode, did your computer actually recognize the phone? If so, does ODIN see the phone when you plug it in?

stephen_w said:
When you tried using adb to reboot it into download mode, did your computer actually recognize the phone? If so, does ODIN see the phone when you plug it in?
Click to expand...
Click to collapse
Yea and odin did as well but when i tried to run it from recovery it just said setting up connection.

stephen_w said:
When you tried using adb to reboot it into download mode, did your computer actually recognize the phone? If so, does ODIN see the phone when you plug it in?
Click to expand...
Click to collapse
yes and ODIN does as well, but it doesn't doing anything but say setting up connection.

Michaelk706 said:
yes and ODIN does as well, but it doesn't doing anything but say setting up connection.
Click to expand...
Click to collapse
Ok, so ODIN sees it. That's a plus I think. When ODIN sees the phone, what exactly does it show in the "Message" window in the bottom left?
I'm just wondering if it's able to actually flash anything. If it can, we can probably get you fixed.

setup connection

Hmm, I know you said you tried everything, but just to verify, have you removed the battery, held vol up & down, plugged in USB then put the battery back in while still holding the vol keys down?
What about the 1-click Heimdal method? I think that's listed in the dev section.
Sent from my SGH-T959V using XDA App

stephen_w said:
hmm, i know you said you tried everything, but just to verify, have you removed the battery, held vol up & down, plugged in usb then put the battery back in while still holding the vol keys down?
What about the 1-click heimdal method? I think that's listed in the dev section.
Sent from my sgh-t959v using xda app
Click to expand...
Click to collapse
i am freaking out man, i did that a hundred times, it is not my first phone that i have broken!! And it freaking worked this time, i don't get it..thanks i guess have it off for 24 hours fixed it, im super excited! thanks bro!
edit, i just did odin but it just goes back to recovery...
edit 2 time, I used this and fixed it http://forum.xda-developers.com/showthread.php?t=1223765, was using Krylon fix but it didn't work.

Glad you got it into dowload mode. What exactly did you try to flash?
Sent from my SGH-T959V using XDA App

Michaelk706 said:
edit 2 time, I used this and fixed it http://forum.xda-developers.com/showthread.php?t=1223765, was using Krylon fix but it didn't work.
Click to expand...
Click to collapse
Awesome! Glad you're working bro
Sent from my SGH-T959V using XDA App

I edit it, thanks man I owe you big time! You gave me the best veterans day present a Marine could ask for hahahah!

Happy Veteran's Day from an ex-Airman!
Semper Fi
Sent from my SGH-T959V using XDA App

Build.prop

I have the Motorola Fire XT rooted and deleted the build.prop file in the system. I have a back - up of the file on my computer but not my phone. I need to figure out a way how to put it on my phone. My phone is in a boot loop. Any help? Thanks.

You could push it to your device via adb. This can be done manually or you could use a tool such as this: http://forum.xda-developers.com/showthread.php?t=1599332.

You need adb. Install adb and put the build.prop file in the same folder as adb and use the command "adb push build.prop /system"

Theonew said:
You could push it to your device via adb. This can be done manually or you could use a tool such as this: http://forum.xda-developers.com/showthread.php?t=1599332.
Click to expand...
Click to collapse
estallings15 said:
You need adb. Install adb and put the build.prop file in the same folder as adb and use the command "adb push build.prop /system"
Click to expand...
Click to collapse
What can one do if this action is needed (running ADB) but the user haven't turned on USB-Debuggning, nor can enter the recovery mode.
Considered a bricked device?

nikkop said:
What can one do if this action is needed (running ADB) but the user haven't turned on USB-Debuggning, nor can enter the recovery mode.
Considered a bricked device?
Click to expand...
Click to collapse
No. Do you have this issue? If so, are you able to boot into fastboot/bootloader?

Theonew said:
No. Do you have this issue? If so, are you able to boot into fastboot/bootloader?
Click to expand...
Click to collapse
Hello,
Yes I do.
I can't get into recovery mode because the device gets stuck at the logo.
I know it's the correct buttons being pressed as I do have another same tablet which enters recovery without problems.
If you mean fastboot via USB-Debugging? Well I can't do any ADB because I don't have USB-debugging enabled.
Any idea how to rescue this tab?
Thanks

nikkop said:
Hello,
Yes I do.
I can't get into recovery mode because the device gets stuck at the logo.
I know it's the correct buttons being pressed as I do have another same tablet which enters recovery without problems.
If you mean fastboot via USB-Debugging? Well I can't do any ADB because I don't have USB-debugging enabled.
Any idea how to rescue this tab?
Thanks
Click to expand...
Click to collapse
If resetting the device doesn't work, you don't have access to recovery mode/bootloader/fastboot or even download mode (depending on your device), then there is pretty much nothing you can really do to fix it yourself. The only other possibility would be to try to run the stock ruu (if it has one).

Theonew said:
If resetting the device doesn't work, you don't have access to recovery mode/bootloader/fastboot or even download mode (depending on your device), then there is pretty much nothing you can really do to fix it yourself. The only other possibility would be to try to run the stock ruu (if it has one).
Click to expand...
Click to collapse
Thanks for the suggestions, but that would suck
Must be something I can do.
It's a Chinese brand tablet, the quality is good but this is the only issue.
However, if I plug in the tablet to the computer, something called "WinDroid Linker" shows up on the PC and I remote to the tablet while I'm on the screen that says I need to do a factory reset. From there I can reach keyboard settings, but that's all I've figured out so far.
Due to the fact that I'm able to remote the tablet, shouldn't I be able to do something from there?
I'm not, however, able to reach the storage as far as I know.
Thanks

nikkop said:
Thanks for the suggestions, but that would suck
Must be something I can do.
It's a Chinese brand tablet, the quality is good but this is the only issue.
However, if I plug in the tablet to the computer, something called "WinDroid Linker" shows up on the PC and I remote to the tablet while I'm on the screen that says I need to do a factory reset. From there I can reach keyboard settings, but that's all I've figured out so far.
Due to the fact that I'm able to remote the tablet, shouldn't I be able to do something from there?
I'm not, however, able to reach the storage as far as I know.
Thanks
Click to expand...
Click to collapse
Maybe, but only if you can bypass the part.

Thanks
Thanks for all the suggestions. I have already tried adb but it says my phone is offline. I can get into recovery but idk if that will do much. Idk how to get my phone into fastboot. Thanks.

Theonew said:
If resetting the device doesn't work, you don't have access to recovery mode/bootloader/fastboot or even download mode (depending on your device), then there is pretty much nothing you can really do to fix it yourself. The only other possibility would be to try to run the stock ruu (if it has one).
Click to expand...
Click to collapse
I can get into recovery mode but ADB says my phone is offline so I cant do anything with that. Idk what bootloader is or fast boot but maybe that would be a solution. Thanks.

If you can get into recovery mode, find the mount options. Mount /system. Then adb push the file to your phone.
Sent from my SGH-T999 using xda premium

Theonew said:
If resetting the device doesn't work, you don't have access to recovery mode/bootloader/fastboot or even download mode (depending on your device), then there is pretty much nothing you can really do to fix it yourself. The only other possibility would be to try to run the stock ruu (if it has one).
Click to expand...
Click to collapse
option94 said:
If you can get into recovery mode, find the mount options. Mount /system. Then adb push the file to your phone.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Ya but if im in recovery my phone wont show up in the listed devices. And now my device wont show up as its booting up. If there is a way for adb to recognize the phone in recovery that would be great.

If you have adb properly setup it should see it in recovery. What recovery are youbusing? I do this stuff in clockwork all the time when I'm porting roms.
Sent from my SGH-T999 using xda premium

option94 said:
If you have adb properly setup it should see it in recovery. What recovery are youbusing? I do this stuff in clockwork all the time when I'm porting roms.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Android system recovery. Idk how to get clockwork.

Froggywoggy25 said:
Android system recovery. Idk how to get clockwork.
Click to expand...
Click to collapse
See my post about unbricking fire xt.
Don't forget the Thanks button
Sent from my XT530 using xda app-developers app

build.prop lost
can u put a copy of build.prop becoz i hav lost my copy......

aweosomeabhijeet said:
See my post about unbricking fire xt.
Don't forget the Thanks button
Sent from my XT530 using xda app-developers app
Click to expand...
Click to collapse
can u post build.prop for motorola fire xt 530......

[SOLVED][Q] brick i think something happened

okay so i was flashing from ics to jelly bean...and it flashed like normal....wiped cache and dalvik cache and hit reboot...now its stuck on sgs4g boot screen can't get into recovery anymore kies isn't helping and neither is heimdall one click non of the program recognize my devise when i connect the charger it just stays on the spiral symbol....cant even go into download mode can someone help me please asap!!!! if possible

Do I need a new sgs4g now or is there still hope for this one and if I need a new one can someone hook it up for me? Like $ 80-90.....
Sent from my DROID RAZR using xda app-developers app

Like many people have said, this phone is very tough to brick. I have brought it back from many of soft bricks before. First thing first are you sure it is a SGH-T959V ?
Next did you install the proper USB drivers for the phone?
Can you get into Download mode by having your phone off, holding down both volume buttons and plugging it in to the USB?
Sent from my SGH-T959V using xda premium

Yes its a sgs4g I can't get to download mode or recovery....I didn't know it was hard to brick and idk how it happened I was flashing like I normally did with my sgs4g didn't boot and I followed the instructions on how to recover from a soft brick and didn't work
Sent from my DROID RAZR using xda app-developers app

Young_Azul said:
Yes its a sgs4g I can't get to download mode or recovery....I didn't know it was hard to brick and idk how it happened I was flashing like I normally did with my sgs4g didn't boot and I followed the instructions on how to recover from a soft brick and didn't work
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Ok Do you still need help or have you figured it out yet? I know pretty much exactly how to fix this.

coreya92 said:
Ok Do you still need help or have you figured it out yet? I know pretty much exactly how to fix this.
Click to expand...
Click to collapse
still need help

@coreya92 I still need help to fix my galaxy phone please help!!!!!!!!
Sent from my espresso using xda app-developers app

You can't get into download mode? Invest in a USB jig.
Also I think this guy was in the same boat a while ago. Somebody suggested holding home button or something like that. Check it out http://forum.xda-developers.com/showthread.php?t=1910774

TwitchyEye said:
You can't get into download mode? Invest in a USB jig.
Also I think this guy was in the same boat a while ago. Somebody suggested holding home button or something like that. Check it out http://forum.xda-developers.com/showthread.php?t=1910774
Click to expand...
Click to collapse
well @TwitchyEye i tried the "Hold volume down plus the home key and then power on the device" and it didnt work but then i tried for the hell of it to plug in my usb while holding both volume keys and it worked even though it didnt before trying that other method thanks....but now i need help to install the stock Rom/firmware

Great! Hope you're up and running again.
Edit: try following Lumin's guide http://forum.xda-developers.com/showthread.php?t=1470716

TwitchyEye said:
Great! Hope you're up and running again.
Edit: try following Lumin's guide http://forum.xda-developers.com/showthread.php?t=1470716
Click to expand...
Click to collapse
im following and im looking at going like this is what i did to root it in the first place lolz...but yeah my phone is being recognized by my computer as SAMSUNG USB Composite Device don't know if that's how its supposed to be read

Yeah that's it.

TwitchyEye said:
Yeah that's it.
Click to expand...
Click to collapse
now im just waiting for heimdall to finish...its saying
"Initializing connection...
Detecting device...
Claiming interface...
Setting up interface...
Checking if protocol is initialised...
Protocol is not initialised.
Initialising protocol...
Handshaking with Loke..." its been on Loke for a while now....how long does it normally take to flash over completely

Sounds like it doesn't see the phone. Did zadig install the driver successfully?

TwitchyEye said:
Sounds like it doesn't see the phone. Did zadig install the driver successfully?
Click to expand...
Click to collapse
yes it did and made sure it installed it on the correct thing by unplugging phone and replugging phone with usb...that was before running heimdall

Young_Azul said:
yes it did and made sure it installed it on the correct thing by unplugging phone and replugging phone with usb...that was before running heimdall
Click to expand...
Click to collapse
and it also lets me flash bootloaders if i want but gives me a warning first but i haven't said yes to that....should i?

Well.. no. Not if it's not flashing right to begin with. Try rebooting the pc first and see if that helps. It should flash and reboot your phone, and then you can flash bootloaders.

TwitchyEye said:
Well.. no. Not if it's not flashing right to begin with. Try rebooting the pc first and see if that helps. It should flash and reboot your phone, and then you can flash bootloaders.
Click to expand...
Click to collapse
it went from download mode to this
and it cant connect to kies now
Firmware upgrade encountered an issue. please select recovery mode in Kies & try again

Kies and heimdall do not play well together. Stick with heimdall. All you need to get back to stock and root is here. What you should do is uninstall whatever drivers you have and start over from scratch.
http://forum.xda-developers.com/showthread.php?t=1358498

Young_Azul said:
well @TwitchyEye i tried the "Hold volume down plus the home key and then power on the device" and it didnt work but then i tried for the hell of it to plug in my usb while holding both volume keys and it worked even though it didnt before trying that other method thanks....but now i need help to install the stock Rom/firmware
Click to expand...
Click to collapse
Get back with me in This post. Ill walk you through everything. Its very simple. And you can also get into download mode using commant prompt. Obviously if you can put your phone back in download mode using the, USB connect method to get into download mode your phone isnt hard bricked. Very easy to recover your phone from here. Just a few simple steps and ill have you back up and running.
Sorry its taken a while to get back to you but, Ive been at the lake house for past two days

[Q] lost recovery screen

Basically, i was in the process of rooting the device. I have 4.0.4. So, I am able to run Odin, with it showing "success" on the screen. I unchecked auto reboot. So, I unplugged the USB, and when I try to reboot into recovery, I get nothing, just a black screen. The samsung logo screen will come on and then go away. I hold volume down and power button, and then let go of power button. Prior to running Odin, I was able to see the stock recovery screen. But now, I can't get to any recovery screen. But the phone will boot up no problem, and I can get to the download screen no problem as well. I am not sure what to do next. Can anyone help me or does anyone have any ideas what I may be doing wrong? Thank you.

rosebud1 said:
Basically, i was in the process of rooting the device. I have 4.0.4. So, I am able to run Odin, with it showing "success" on the screen. I unchecked auto reboot. So, I unplugged the USB, and when I try to reboot into recovery, I get nothing, just a black screen. The samsung logo screen will come on and then go away. I hold volume down and power button, and then let go of power button. Prior to running Odin, I was able to see the stock recovery screen. But now, I can't get to any recovery screen. But the phone will boot up no problem, and I can get to the download screen no problem as well. I am not sure what to do next. Can anyone help me or does anyone have any ideas what I may be doing wrong? Thank you.
Click to expand...
Click to collapse
brother try flashing cwm again
also there are many other recoveries you can try them if available
also there are many backup apps [although i cant remember} which have feature of booting into recovery so find and try them
good luck:good::good:

I tried flashing through Odin about 5 times. It says 5. For custom binary downloads... but when I reboot, I just cant get it into recovery. After flashing through odin, and odin says complete, I unplug tablet and try to reboot into recovery, and I get nothing. It almost seems like its going to work but it doesnt. Also, I cant even update the system upgrade.... im guessing since I cant get to recovery screen, neither can the devixe when it tried to update. I'm lost at what to tey next....

Are you positive you flashed a recovery that is designed for your Tab?

Oh nice idea... I used the files in the how to post in the dev section. But I couldnt. Find the 4.93 tar file so I downloaded it somewhere else. It may have been bad I guess? Like I said, everything worked until I had to reboot to recovery. Does anybody have the. Philz touch4.93 tar file? Thank youguys for your help. I appreciate it so much. None of my friends are into this stuff, so you guys are all I got. Lol.

I tried starting over from the beginning of the steps but nothing works. I just get the same result. Does anybody have any ideas of what I am doing wrong or any suggestions? Thank you for your help in advance.

rosebud1 said:
I tried starting over from the beginning of the steps but nothing works. I just get the same result. Does anybody have any ideas of what I am doing wrong or any suggestions? Thank you for your help in advance.
Click to expand...
Click to collapse
Witch tutorial and sources did you use ?

http://forum.xda-developers.com/showthread.php?t=1657056
I used the tutorial here in this forum, but the sources of the files I downloaded from were wherever I could find them as and of the links in this thread no longer contained the files. Do you have a different tutorial to follow? Thank you for your response and help.
Sent from my LG-E980 using xda app-developers app

rosebud1 said:
http://forum.xda-developers.com/showthread.php?t=1657056
I used the tutorial here in this forum, but the sources of the files I downloaded from were wherever I could find them as and of the links in this thread no longer contained the files. Do you have a different tutorial to follow? Thank you for your response and help.
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
So you got two problems.
One is the los of your recovery en two is the root.
I alway's use the cwm recovery.
and for root is use CF-Auto-Root-espresso
Btw what tab are you on, P5100 P5110 or ??????
That could make a diverance.
Link to Cwm
http://forum.xda-developers.com/showthread.php?t=2268785
For the root
http://forum.xda-developers.com/showthread.php?t=1980683
http://autoroot.chainfire.eu/

Did you check the MD5 hash for your CWM zip? If it is incomplete it doesn't stand much of a chance at working. On Windows I use winmd5free, and on the tablet I use MD5 Hash (Free, No Ads) from the Google Playstore to verify the MD5 of anything I download before flashing it.
Personally I've used the unofficial TeamWin Recovery 2.6.3.0 zip (TWRP) on my P5113 to install CM 10.2 from the Nightly builds.
Also, verify your device is really rooted. I used RootValidator, again from the Google Playstore, to check after rooting my Tab the first time.

Okay I will try checking md5. Thank you so much. Also, I have sgh i497.... how do I know 5110 vs 5100?
Sent from my SAMSUNG-SGH-I497 using xda app-developers app

rosebud1 said:
Okay I will try checking md5. Thank you so much. Also, I have sgh i497.... how do I know 5110 vs 5100?
Sent from my SAMSUNG-SGH-I497 using xda app-developers app
Click to expand...
Click to collapse
Goto Settings, About tablet (scroll down to the bottom of the settings to find it).
Check out focussoft's directions on how he rooted his sgh-i497. Note he refers to an older version of TWRP Recovery in his instructions.
I used this to root my P5113.
It is easy to confuse the volume rocker switch directions. Remember that the side next to the power button is Volume Down!

P5100 is the one with a simcard ( 3g/phone )
P5110 is the wifi only tablet
P5113 is wifi and Infrared

Okay, I have 3g and wifi on here so I have 5100.
Sent from my SAMSUNG-SGH-I497 using xda app-developers app

Then you got the same as i have, makes it a bit easyer. Any progress by now ?
Sent from my GT-P5100 using Tapatalk

I tried to update my device with the of a, but I think it won't work because I can't access my recovery screen.

And the cwm i tipt you earlyer ?
Sent from my GT-P5100 using Tapatalk

Make sure you have root.
Look up mobile Odin. The lite version is free but make sure you grab the correct kernel flash file for your tablet.
Download the latest cwm/philz/twrp of your choice for your device and use mobile Odin app to flash recovery.
I've occasionally had issues getting into recovery on my 3113 and found that powering off, plugging it in until the battery icon shows then holding power and volume up and quickly unplugging the cable seems to help. Continue holding volume up for about 5 seconds after the black screen shows and it goes into recovery 99% of the time.
I should note that I only have that issue if I flash incompatible rom and kernel combos or wipe my system and accidentally turn the tab off in recovery mode.
Sent from my LGMS500 using XDA Premium 4 mobile app

tokenpoke said:
make sure you grab the correct kernel flash file for your tablet.
Click to expand...
Click to collapse
I got a funny feeling that it wasn't......

Amadeus01 said:
I got a funny feeling that it wasn't......
Click to expand...
Click to collapse
I should have been clearer. The file I specified is for Mobile Odin.
Mobil Odin: http://forum.xda-developers.com/showthread.php?t=1347899
Here's the thread. I'll edit this post in a second with the right recovery.
If you flashed a bad kernel you wouldn't be able to boot past the Samsung screen at all, except to get into download mode. If you can boot to the rom, it's not the wrong kernel. Likely just the wrong recovery or a corrupted recovery download.
Brb, hold tight.
Oh boy... we have a big problem...
I just rececked your model number from your signature....
YOU DO NOT HAVE A 51XX TABLET. DO NOT FLASH 51XX FILES.
What you have is the AT&T 4g model.
Flashing files for any other model can potentially permanent brick your device as all the hardware is completely different.
Let me get back to you again and see if I can find a real recovery option for you.
Ok, here is a good recovery for you. Try this and get back to me.
http://forum.xda-developers.com/showthread.php?t=2228332
Please follow thread directions.
Sent from my LGMS500 using XDA Premium 4 mobile app