Related
Brand new Thunderbolt, I did have it rooted but just factory reset it, I no longer have root. I hold down the power button and BOTH volume arrows and get into the screen for recovery, when I go to it it gives me a black screen with a pic of a phone in the middle with a red triangle and a red exclamation mark over top the phone.
I want to root and get a new kernel but think it would not be smart to proceed until I fix this problem. Jeesh, had it less than 12 hours and broke it already haha.
So, how do I get it to let me in there so I can make a nandroid backup?
I'm pretty certain you need to be rooted to access recovery.
Well, last night when I WAS rooted I tried it and it didn't work either. Well, I will try that tonight around 5PM EST and let you know if rooting allows me in. Honestly, I factory reset the phone after I rooted it because I thought the way I rooted it messed it up. Now I am thinking that is not true.
You have to be rooted to get into recovery. Also, and I am not 100% sure about this, if you did a factory re-set and didnt re-root and then reinstall CWR then there wont be a recovery for you to access.
You're looking at the stock recovery. You need to reroot and flash CWM to be able to install custom zips.
Sent from my Thunderbolt.
theincrediblenoob said:
Brand new Thunderbolt, I did have it rooted but just factory reset it, I no longer have root. I hold down the power button and BOTH volume arrows and get into the screen for recovery, when I go to it it gives me a black screen with a pic of a phone in the middle with a red triangle and a red exclamation mark over top the phone.
I want to root and get a new kernel but think it would not be smart to proceed until I fix this problem. Jeesh, had it less than 12 hours and broke it already haha.
So, how do I get it to let me in there so I can make a nandroid backup?
Click to expand...
Click to collapse
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Ok, here is what I did, i took a factory thunderbolt and followed all the directions on this link.
http://www.thunderboltforums.com/fo.../1233-rs-guide-how-root-your-thunderbolt.html
Then, I downloaded rom manager and busybox and was about to try and install a kernal. I wanted to make a nandroid back up and thats when I noticed this problem. I also think I lost my 3g access then too. So, I went to factory reset and then tested the root checker app and it said I had NO ROOT.
I am rather noobish so please make the directions on how to fix this simple HAHA. I am also wondering if the link above has good root instructions and how would I install a kernel on the thunderbolt? Even a link to a thunderbolt kernel thread would be sweet!! THanks!!
I will wait for someone to let me know if that link is any good before I root with it again.
dbisch said:
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Click to expand...
Click to collapse
Honestly, idk what that is.. Sry, the only other phone i rooted was my incredible through the one step Unrevoked method.
I think the directions in the link above might have missed something that a noob like me would not have picked up on. Something you guys prolly would have known right away.
Go to xda Tbolt dev section, find the root how-to thread and re-root
Sent from my ADR6400L using XDA App
theincrediblenoob said:
Honestly, idk what that is.. Sry, the only other phone i rooted was my incredible through the one step Unrevoked method.
I think the directions in the link above might have missed something that a noob like me would not have picked up on. Something you guys prolly would have known right away.
Click to expand...
Click to collapse
CMW is ClockworkMod Recovery. It's the recovery you flash in ROM Manager.
Follow this thread for rooting. There's a few other methods in the development section that have scripts so you don't have to manually push through ABD. Doing it yourself is more fail safe though and also a good learning experience.
http://forum.xda-developers.com/showthread.php?t=996616
dbisch said:
CMW is ClockworkMod Recovery. It's the recovery you flash in ROM Manager.
Follow this thread for rooting. There's a few other methods in the development section that have scripts so you don't have to manually push through ABD. Doing it yourself is more fail safe though and also a good learning experience.
http://forum.xda-developers.com/showthread.php?t=996616
Click to expand...
Click to collapse
What about the link in my original post that I used to root? Any good?
theincrediblenoob said:
Then, I downloaded rom manager and busybox
Click to expand...
Click to collapse
Downloading Rom Manager is NOT installing custom recovery but a way to do so.
Once RM is installed open it up & choose Flash ClockworkMod Recovery. That will install the latest recovery from which you can run backups and such.
feedhead said:
Downloading Rom Manager is NOT installing custom recovery but a way to do so.
Once RM is installed open it up & choose Flash ClockworkMod Recovery. That will install the latest recovery from which you can run backups and such.
Click to expand...
Click to collapse
See, now when I did my incredible I never even downloaded rom manager. I don't even know what it really does. I thought I held up and power when turning on to get into the menu and I was able to make the nandroid backup from that menu somewhere?
dbisch said:
A factory reset shouldn't cause you to lose root. That just wipes data/cache. I would return to stock, root again and go from there. There's a thread in the development section on how to return to stock.
Did you flash CWM after rooting??? You can't do **** without that.
Click to expand...
Click to collapse
What do you mean exactly by flashing CWM ? I just followed the instructions that the link gave me to do. If you wanna check it out i included the below
http://www.thunderboltforums.com/fo.../1233-rs-guide-how-root-your-thunderbolt.html
So... Just my 2 cents. You said you downloaded clockworks and busy box, but I never saw you reference super user. That should have been download number 1 after root. Without that, you're not doing anything.
bking_soda said:
So... Just my 2 cents. You said you downloaded clockworks and busy box, but I never saw you reference super user. That should have been download number 1 after root. Without that, you're not doing anything.
Click to expand...
Click to collapse
Yes, I did get that one too. I just rerooted it and now I am looking at the main screen in the rom manager again. What should I do? I do not have busy box, I have rom manager, superuser and root access. I keep hearing something about flashing clockworkrecovery next?? Like does that mean just click on the box in rom manager?
theincrediblenoob said:
I keep hearing something about flashing clockworkrecovery next?? Like does that mean just click on the box in rom manager?
Click to expand...
Click to collapse
In ROM Manager if you select "Flash ClockworkMod Recovery", Rom Manager will do just that.
It will flash your recovery.
MePascal said:
In ROM Manager if you select "Flash ClockworkMod Recovery", Rom Manager will do just that.
It will flash your recovery.
Click to expand...
Click to collapse
Ok I guess I am not fully understanding this. What does it really mean to "flash" your "recovery"?
Does this mean to make a copy of your current phone, like a nandroid backup? Or does it mean to access a copy you have already made and revert your system to that prior copy? Or am I wrong on both?
theincrediblenoob said:
Ok I guess I am not fully understanding this. What does it really mean to "flash" your "recovery"?
Does this mean to make a copy of your current phone, like a nandroid backup? Or does it mean to access a copy you have already made and revert your system to that prior copy? Or am I wrong on both?
Click to expand...
Click to collapse
The answer to your first question of the first link being any good...that would be a big NO. Your phone never rooted from the start due to faulty directions posted. As far as flashing a recovery from clockworkmod that basically means when you need to get to the recovery screen this is the program that will bring you there with the understanding that you flash the recovery. NOW to do that there is an option at the top of the screen which says
" Flash ClockworkMod Recovery "
Latest Recovery: ClockworkMod 3.0.2.5
Once you flash it will show this:
Flash CLockworkMod Recovery
Current Recovery: ClockworkMod 3.0.3.5
Latest Recovery: ClockworkMod 3.0.2.5
TO FLASH YOU SIMPLY SELECT THIS BOX AND IT WILL BRING UP A SCREEN TO CONFIRM PHONE MODEL AND THEN WILL ASK FOR SUPERUSER PERMISSION WHICH YOU MUST GRANT ACCESS TO AT ALL TIMES.
KDKobes said:
The answer to your first question of the first link being any good...that would be a big NO. Your phone never rooted from the start due to faulty directions posted. As far as flashing a recovery from clockworkmod that basically means when you need to get to the recovery screen this is the program that will bring you there with the understanding that you flash the recovery. NOW to do that there is an option at the top of the screen which says
" Flash ClockworkMod Recovery "
Latest Recovery: ClockworkMod 3.0.2.5
Once you flash it will show this:
Flash CLockworkMod Recovery
Current Recovery: ClockworkMod 3.0.3.5
Latest Recovery: ClockworkMod 3.0.2.5
TO FLASH YOU SIMPLY SELECT THIS BOX AND IT WILL BRING UP A SCREEN TO CONFIRM PHONE MODEL AND THEN WILL ASK FOR SUPERUSER PERMISSION WHICH YOU MUST GRANT ACCESS TO AT ALL TIMES.
Click to expand...
Click to collapse
What is wrong with the link above?? I used it last night to root the phone and according to root checker I have root... I am not second guessing you, I am just wanting to know what is wrong with it so I can fix the wrong or add the missed steps so I dont have issues.
http://forum.xda-developers.com/showthread.php?p=16987136#post16987136
I posted on the relevant thread but since it's very old and the title misleading, I'm not sure anyone will care to read it...
Long story short, I put the update zip found on that thread on my sd card, booted into hboot and proceeded to go through with the update. Now I'm stuck boot looping with the first three splash screens (HTC, "quitely brilliant," then ATT). Rebooting into hboot (Vol. down + power) won't let me choose any other options, it just automatically starts updating and asks me if i want to update. Yes reinstalls it and gives me the same problem. No reboots and gives me the same problem. any help would be appreciated.
jmusso said:
http://forum.xda-developers.com/showthread.php?p=16987136#post16987136
I posted on the relevant thread but since it's very old and the title misleading, I'm not sure anyone will care to read it...
Long story short, I put the update zip found on that thread on my sd card, booted into hboot and proceeded to go through with the update. Now I'm stuck boot looping with the first three splash screens (HTC, "quitely brilliant," then ATT). Rebooting into hboot (Vol. down + power) won't let me choose any other options, it just automatically starts updating and asks me if i want to update. Yes reinstalls it and gives me the same problem. No reboots and gives me the same problem. any help would be appreciated.
Click to expand...
Click to collapse
It's doing this because you have a PD98IMG.zip on your card, and when it's there hboot will always try to install it. Remove the SD, boot to HBoot, select recovery, put your SD card back in, flash a new ROM or backup (if you don't already have another ROM or a backup, you'll need to download a new ROM, mount USB storage in recovery, move the rom to your sd, unmout usb storage, install ROM). Assuming you're s-off with custom recovery (CWM)?
So I can get into ClockworkMod Recovery now... Thank you for the information. However, when I try to flash a different ROM by choosing 'install .zip from sd card,' and picking one of the ROMs on my sd card (including what I'm sure must be the version of CM7 I had on there in the first place), once again I get a boot-loop, this time with the CM7 splash screen. Any ideas...?
EDIT: Okay, scratch that. I was able to do a restore to some point in time when I was experimenting with MIUI. The problem I have now actually is getting back to the stock ROM for the Inspire. Can someone point me in the best direction to get there? That's how I got in this whole mess in the first place.
jmusso said:
So I can get into ClockworkMod Recovery now... Thank you for the information. However, when I try to flash a different ROM by choosing 'install .zip from sd card,' and picking one of the ROMs on my sd card (including what I'm sure must be the version of CM7 I had on there in the first place), once again I get a boot-loop, this time with the CM7 splash screen. Any ideas...?
EDIT: Okay, scratch that. I was able to do a restore to some point in time when I was experimenting with MIUI. The problem I have now actually is getting back to the stock ROM for the Inspire. Can someone point me in the best direction to get there? That's how I got in this whole mess in the first place.
Click to expand...
Click to collapse
There's a return to stock option in the newest version of the Hack Kit. Read the 'effen manual' and it will tell you how
jmusso said:
So I can get into ClockworkMod Recovery now... Thank you for the information. However, when I try to flash a different ROM by choosing 'install .zip from sd card,' and picking one of the ROMs on my sd card (including what I'm sure must be the version of CM7 I had on there in the first place), once again I get a boot-loop, this time with the CM7 splash screen. Any ideas...?
EDIT: Okay, scratch that. I was able to do a restore to some point in time when I was experimenting with MIUI. The problem I have now actually is getting back to the stock ROM for the Inspire. Can someone point me in the best direction to get there? That's how I got in this whole mess in the first place.
Click to expand...
Click to collapse
If you just want a stock ROM but want to keep S-OFF, try this:
http://forum.xda-developers.com/showthread.php?p=16118438#post16118438
softbrick
i was trying to reroot my phone cause some how i lost root acess so i used the new ace hack kit and it froze my phone halfway thru it no i get stuck at the first white htc screen i can still acess the bootloader but the only recovery i have now is stock recovery do you guys know how i can bring my phone back to life please ??????
Hi guys, I have desire s, hboot v. 2, sense 3, android 2.3.5. I've unlocked the boot leader using thehtcdev procedure, the device is still s-on. What do I have to do next to obtain root? I don't want to change the rom, just to have root with the stock rom. Thanks
Install recovery (Clockworkmode or 4extrecovery).
If you want your stock room, but rooted, download to your SDCard superuser.zip (you can found it on forum) and install it.
If you want use custom room, just download your room, take it to SDcard, get to recovery, wipe all data and install it.
For all download & informations, check this page: http://forum.xda-developers.com/showthread.php?t=1186401
Thanks man, I found the correct superuser.zip. However I'm running to a problem - there is an error in the recovery console... When I reboot and select recovery I see a triangle with an exclamation mark for a minute, then a message "Can't mount cache/recovery/command". Then if I select "Install zip from sdcard" the phone simply reboots and doesn't allow to select the zip.
I tried also superoneclick... it performs around 9-10 steps and then says Root: False.
tinypic.com/r/15gt2yh/5
---------
It worked! The secret is to uninstall HTC Sync!
If you're having problems then read this thread. It worked for me. I'm Android 2.3.5, sense 3.0, hboot 2.00.0002, S-ON and rooted.
http://forum.xda-developers.com/showthread.php?t=1390496
Sent from my HTC Desire S using xda premium
Man, for first install ClockWorkMode, which is good recovery, check this:
http://forum.xda-developers.com/showthread.php?t=1244538
i guess you have adb....if not, check http://forum.xda-developers.com/showthread.php?t=1186401
just search, everything´s on forum...and if not, search on google
First of all, I apologize if this is the wrong area to ask this question. I've been to two other forums with my question and have been told to sod-off without help because I posted in the wrong section
Okay, so I bought my first android phone the other day (HTC Inspire!) and I must say, I am never going back to an iPhone ever again.
However, I am a complete and total noob to rooting (as you will find out)
I successfully rooted my phone upon receiving it (with ACE Advanced Hack Kit) and upon trying to install a custom ROM, received an error (to which I cannot seem to remember specifically what it was). I called a friend who told me to re-run the hack kit, which was a bad idea. It ended up freezing on the radio downgrading and put my phone into a bootloop.
I got it out of bootloop after a few hours of research and reset the phone back to its original settings.
Now, my question is: My phone, in HBOOT, still shows that it is "S-OFF." Would it be okay for me to run it through Ace Advanced Hack Kit again to install CWM? I tried using ROM Manager to flash it over, but rom manager is saying my phone isn't rooted at all, which confuses me. I keep getting the error "An error occurred while attempting to run privileged commands!"
Any help or advice you guys can shed would be wonderful.
Once you are s off never run the hack kit again unless you are going to reverse to s on. Your friend gave you some bad advice. Rooted and s off are not the same thing. S off allows flashing of pd98img and custom recovery. Root is an ability within the Rom you use. From your phone install superuser from the market. That will give you root and will let you install a custom recovery through Rom manager. Only install recovery with Rom manager. Don't let Rom manager install a Rom as it is buggy at best. Or you can use 4ext recovery. Once you have a custom recovery do a backup so you can restore if things go wrong. Download whatever Rom you want to use then you want to always select (within recovery) wipe data/factory reset and then wipe dalvik. This should leave you with an empty data, cache and dalvik and also erases android.secure on sd card. Once there you can install a Rom. Never use the factory reset from Rom or hboot with s off as it will really screw things up. Also almost every custom Rom has superuser and busybox installed already so you shouldn't need to install superuser again.
Gizmoe said:
Once you are s off never run the hack kit again unless you are going to reverse to s on. Your friend gave you some bad advice. Rooted and s off are not the same thing. S off allows flashing of pd98img and custom recovery. Root is an ability within the Rom you use. From your phone install superuser from the market. That will give you root and will let you install a custom recovery through Rom manager. Only install recovery with Rom manager. Don't let Rom manager install a Rom as it is buggy at best. Or you can use 4ext recovery. Once you have a custom recovery do a backup so you can restore if things go wrong. Download whatever Rom you want to use then you want to always select (within recovery) wipe data/factory reset and then wipe dalvik. This should leave you with an empty data, cache and dalvik and also erases android.secure on sd card. Once there you can install a Rom. Never use the factory reset from Rom or hboot with s off as it will really screw things up. Also almost every custom Rom has superuser and busybox installed already so you shouldn't need to install superuser again.
Click to expand...
Click to collapse
I've installed SU from the play store, but when I go into ROM Manager, it is still saying superuser isn't installed, or I'm not rooted.
Actually you can use the hack kit again BUT you have to go into the optional menu and not use the main option of root.
In the optional screen their is an option to install cwr.
Or alternatively you can install cwr via a pd98img.
phyzorz said:
I've installed SU from the play store, but when I go into ROM Manager, it is still saying superuser isn't installed, or I'm not rooted.
Click to expand...
Click to collapse
If you are S-OFF but flashed a RUU then you are not rooted anymore. You can do as Mardsta says and flash SU in CWM or if you are willing to flash a custom rom, just make sure that CWM recovery is installed and flash a rooted rom. The important thing is that you already are S-OFF.
Never run a non stock device....if you are already S-OFF there is no reason to re run the Hack Kit.
marsdta said:
Actually you can use the hack kit again BUT you have to go into the optional menu and not use the main option of root.
In the optional screen their is an option to install cwr.
Or alternatively you can install cwr via a pd98img.
Click to expand...
Click to collapse
Ahh yes the optional menu. Been so long since I've used the hack kit I totally spaced the extra options. I rooted back when we still had to make our own gold card.
glevitan said:
If you are S-OFF but flashed a RUU then you are not rooted anymore. You can do as Mardsta says and flash SU in CWM or if you are willing to flash a custom rom, just make sure that CWM recovery is installed and flash a rooted rom. The important thing is that you already are S-OFF.
Never run a non stock device....if you are already S-OFF there is no reason to re run the Hack Kit.
Click to expand...
Click to collapse
That's the thing though. I don't have CWM installed (going to recovery in HBOOT simply yields the red error symbol). I have SU installed, but because I am not rooted, it isn't being recognized by Rom manager. I apologize for my ignorance, but how exactly do I get CWM on my phone then? Is there a program that can root and flash it without messing with the S setting?
phyzorz said:
That's the thing though. I don't have CWM installed (going to recovery in HBOOT simply yields the red error symbol). I have SU installed, but because I am not rooted, it isn't being recognized by Rom manager. I apologize for my ignorance, but how exactly do I get CWM on my phone then? Is there a program that can root and flash it without messing with the S setting?
Click to expand...
Click to collapse
As marsdta said you can use the hack kits optional menu to flash cwm. You may have to put your phone into fastboot though to get it to recognize it. I'm not 100% on that though because I have never done it that way myself. Or you can use a pd98img.
phyzorz said:
That's the thing though. I don't have CWM installed (going to recovery in HBOOT simply yields the red error symbol). I have SU installed, but because I am not rooted, it isn't being recognized by Rom manager. I apologize for my ignorance, but how exactly do I get CWM on my phone then? Is there a program that can root and flash it without messing with the S setting?
Click to expand...
Click to collapse
Gizmoe said:
As marsdta said you can use the hack kits optional menu to flash cwm. You may have to put your phone into fastboot though to get it to recognize it. I'm not 100% on that though because I have never done it that way myself. Or you can use a pd98img.
Click to expand...
Click to collapse
THAT ^^^^^^
Go to Google Play store and download 4ext recovery control. I like it much better than the cwm given by ace. All you need then is a rom dev'd for inspire or dhd. If it's for dhd then you need to also flash inspiremod so the gps and branding reflect north america and inspire 4g.
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
fashofasho said:
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
when you did S-OFF in order to install Cyanogen JB first you had to flash the latest fw version and then the rom
the rom you tried to install requires the latest fw version
now are you still s-off?
what is now your hboot version?
what is your fw version?
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
i got confused
.i think your answer is going for fashofasho
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
Thanks for the reply. Okay so here is where I am currently at. I haven't done anything since I reflashed stock ROM throguh RUU after the fail cyanogen flash. On this stock ROM whenever I load into bootloader it still says s-off 1.17 but I did lose my clockworkmod. So according to your instructions I should either clockworkmod again or 4ext now, that's okay right? If so, going to flash firmware then cyanogen!! Or is there a problem that I have s-off but not recovery.
P.s. there is no point in running revolutionary and have it s-off again when I already have it right, just thought it might be necessary to make things fresh
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Skipjacks said:
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
fashofasho said:
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
Click to expand...
Click to collapse
flash su-2.3.6.3-ef-signed.zip first and then install 4ext recovery
You're over engineering this. You don't need to root your current ROM first. That's an extra step since you're s-off.
If you are s-off it's really simple to get 4EXT recovery.
First, download this and put it on the root directory of your SD Card (meaning not in a folder, just on the SD Card. Do not rename it)
http://d-h.st/qnm
I got this download link from here...
http://forum.xda-developers.com/showthread.php?p=21989107
Click Thanks for Joaquinf in that thread. He made the 4EXT zip that's flashable through the bootloader.
That is 4EXT made into a zip file that's flashable via the bootloader, which you can do when you are S-off.
So put that file on the SD card, power the phone off, pull the battery out for a second and put it back in (this stops fastboot so you can get back to the bootloader). Then hold volume down and power at the same time. You have to hit both buttons at the same time. If it goes to the splash screen, pull the battery and try again.
When the bootloader loads up it will immediately find the PM58IMG.zip file. It will ask you if you want to install the update. Say yes by hitting volume up I think (it will tell you how to say yes)
Put the phone down and don't touch it until it tells you it's done. Should just take a second. But seriously don't touch it. Leave it alone.
If that works, you've just flashed 4EXT. You can check it by pulling the SD card out (so it doesn't try to flash the PM58IMG again) and rebooting to the bootloader and selecting 'recovery' from the menu. 4EXT should boot up.
This entire process so far shouldn't take more than 3 minutes total. It just sounds like a lot.
To see this detailed out by someone else in case you want to check what I'm saying, read steps 4 and 5 of the first post in this thread.
http://forum.xda-developers.com/showpost.php?p=21989063&postcount=1
Give the author 'thanks' again because he's awesome and deserves it.
Now you've got 4EXT installed. Great. You're 1/3rd of the way home.
Now you need to update your firmware. Delete the PM58IMG.zip file you used to flash 4EXT off the SD card (use a card reader or boot the phone up and delete it, whatever works. You can also use 4EXT as a card reader now too by choosing USB storage from inside 4EXT. It will give you access toteh SD card on your computer now)
Now get new Firmware from this thread.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
try the 3.33 firmware universal. First download link in post 2 of the thread above.
CHECK THE MD5 SUM!!!! I'M NOT PLAYING AROUND HERE!!! You are worried about bricking your phone, this is where you can do it if the firmware .zip is bad.
Put that PM58IMG file on your SD and flash it in the bootloader the same way you flashed 4EXT recovery a minute ago. (If you're still in 4EXT recovery you can use it's power menu to reboot into bootloader easily.)
This will take a minute. The phone will shut off and go black in the middle of this process. Your heart will skip a beat. Relax. It'll come back on. Again, put the phone down and walk away while it does it's thing and don't touch it until it says it's done.
Delete the PM58IMG file from your SD card.
You are now 2/3 of the way there. Your phone WILL NOT boot up right now because your ROM is not compatible with your firmware. Relax. That's supposed to happen.
Now you can flash CM10. Make sure you have the CM10.zip file on your SD card nad GApps. (Bruce has Gapps in his downloads page). Delete the PM58IMG firmware file from your SD card (that's important)
Pull the battery again so you can get back into bootloader. Get into bootloader (power + volume down)
Select Recovery
4EXT should boot up.
Go to the Wipe menu. Wipe all partitions except SD card. (Old ROM is now gone)
Go back to the main menu.
Install from SD
Find the CM10.zip file you should have downloaded and put onto the SD card. Flash it.
This will take about 3 minutes. 4EXT will flash it and ask if you want to reboot. You do not yet. Not you need to flash Gapps the same way you flashed the ROM.
When that's done, now you can reboot. You shoudl see the CyanogenMod boot animation after the splash screen. Give it a few minutes to boot up this first time. Once it boots, set it up the way you like it. If you enjoy it, donate a few bucks to the developer, Bruce.
You don't have to root CM10. It's already rooted when you boot it up the first time.