I followed Heathcliff74's guide to the letter on: http://forum.xda-developers.com/showthread.php?t=1271963
Made a backup and thought it was created (said it was, successful too).
Chevron Labs unlocked.
After deploying 'HTC Interop Unlock.xap' Connection Setup would not accept the db modification, presenting a warning that my carrier was not in the db.
For some odd reason I was able to install Registry Editor and Advanced Config. I also can confirm numbers '##634#', '##778#' and another '##3282#' which seems to be the same as '##778#' number working, forgotten what it is. Advanced Config for Mango does run but options do not 'stick' and it had 'Run AutoData Config' as unchecked. This I believe is my problem. I've tried checking it but it won't stick under a restart. After repairing connection setup (and reinstalling it) I can set my carrier back to what it should be but my 3G is gone. So I decided to check my backup...which Windows 7 didn't refresh my desktop to show it was actually deleted cause the backup failed. -_-; No previous backups.
Further Notes:
I'd like to also try at enabling tethering...Verizon. >_>
Settings->Cellular: APN is set to automatic.
Specs:
OS: 7.10.7720.68
Firmware: 2305.13.20104.605
Connection Setup: 1.13
I'm a developer in all things but WP7. Also got a bit of reverse-engineer in me but WP7 is strange to me. Any help would be greatly appreciated.
*Edit*
I've apparently got V2 drivers? Tango installed eh...Noticed I've not been able to select cellular modes...locked to CDMA?
*Edit*
My brother has the same phone but his is a few versions older (no updates). His Mode Selection allows for Global, CDMA, and GSM...Mine only shows CDMA...
I'm going to tinker around in ##3282# and with password 000000 it works, going to see if I can CDMA->Global this thing.
*EDIT*
I ##3282#ed on my brothers phone and it shows the following ENABLED but mine show DISABLED (will do a comparison of variables/params to see if I can fix this CDMA-only issue):
MOB_TERM_FOR_HOME
MOB_TERM_FOR_SID
MOB_TERM_FOR_NID
*Edit*
After setting these 'Enabled' and rebooting phone...Disabled again. ;_;
I've read around you can help hide your tethering if you set DUN NAI (for verizon) to exclude the dun prefix in the domain name. I can't tether but I'd like to know if this would work. Want to set up tethering.
Thank you all for your help...*echo echo echo*
Luckily I was able to revert back to a previous 'snapshot' backup of my phone and successfully unlocked my phone with the instructions in the referenced thread specific to Verizon.
Our Verizon Trophy's (SparkW) where recently added to DFT's supported list for HSPL (on Feb 15th). We can officially join the world of custom roms and not worry about manually applying Interop unlock.
You can read my guide on HSPL unlocking for SparkW to find out how to do HSPL, if you are interested.
While no Verizon rom is publicly available, DFT does have their Freedom rom in testing for SparkW. Read entire thread for more information.
Is my Verizon HTC Trophy (not HTC Trophy 7) a Spark or SparkW? I'm still on contract so I have to use Verizon networks...new to the WP7 scene, not sure about custom ROMs working on which providers etc. A complete 101 on 'So you have XXX Phone and you want to mod' would be so nice but eh, I don't know enough to write one. I did manage to Interop Unlock and Dev Unlock (Chevron) my phone but I had to force 8107 updates for a feature (Internet Sharing) to work since Verizon doesn't have anything above 7720. Interop Accesses seem down, can't change UserProcGroup to 5 for ICS. :/ Can't add Color Themes in Advance Config either. But I can deploy Interop xaps...
Verizon Trophy has CDMA and is codename SparkW. My HSPL guide covers unlocking it, but read my ENTIRE thread to find out who to contact for a rom to test. I'd get a hold of the test rom link before applying HSPL to the phone.
I did read a good bit of that thread a day or two ago and my SPL is a 2.1.X. :/ I've always wanted to debrand it and work on my own firmware for it after getting source of someone's build close enough to what I wanted. I just don't know if it'd be okay on Verizon's networks as far as working like a normal phone.
*Edit*
Reading again many posts, I've come to understand that HTC Trophy and HTC Trophy 7 are the same except HTC Trophy '7' is Verizon model?
First off, do not worry about debranding the Verizon Trophy (SparkW).. it serves no purpose (only on Spark/GSM Trophy does it serve a purpose).
The 2.01 SPL is easily downgraded to 1.03 so you can do HSPL (which is what my guide will show you). I'm not sure you've read my guide since the thread is really short (being as new as it is). I think you might be mistaking it for the guide for downgrading the original Spark (which is rather complicated). As I recommend in my guide though, you shouldn't do HSPL until you are prepared to install a custom rom (info on getting a pre-release from DFT in thread after a few post).
I wouldn't even try to rationalize calling Verizon Trophy anything else other then "SparkW" or "Verizon Trophy." Some GSM Trophy's are known as "7 Trophy" which makes matters even worse. GSM Trophy's codename is simply "Spark." Almost every other CDMA carrier picked up the "GoldC" (HTC Arrive on Sprint), so I doubt we'll see SparkW on any other carrier (and since it isn't on Sprint, we won't get huge 3rd party rom support). I curse Verizon for not following suite and making the GoldC the new TouchPro2...
I am working out the kinks of cooking a basic SparkW rom, but I can't really tweak it with the XIP rebuilding issues I am having. Man I miss PPCK, but WP7 cooking is in its infancy even today.
I am quite certain I read your guide. Perhaps I've read the wrong one. (http://forum.xda-developers.com/showthread.php?t=1503298) It warns against 2.XX SPL and to wait.
When I meant I wanted to debrand my phone I did mean in terms of deving my own firmware for it. I'm mostly into SB6XXXs as of late (Docsis 3.0 modems more specifically) but these limitations imposed by Microsoft and Verizon in my situation just anger me a bit.
From now I'll assume Verizon's Trophy is 'SparkW'. Thank you for clarifying that. I thought about going Sprint or AT&T, I need an Unlimited Data plan and Tethering.
As far as building a rom, where might I get whatever compiler/packager (I dunno how WP7 phones take roms etc)? I greatly appreciate your clarifications and support.
Related
Hello my friends,
I picked up my HTC Wizard (T-Mobile MDA) yesterday, and I want to modernize it with the latest software. I've spent all day (since 9AM, it's not about 9PM) reading these forums, and I'm insanely confused, probably due to the fact that I'm reading stuff from different times.
I need my wizard to have the following:
-WM6
-Reliable Wi-Fi (i.e. no wifi bugs in the rom)
-Super Reliable phone, working with Rogers Canada (i.e. REALLY no bugs in the phone functionality)
-Bluetooth with A2DP
-TouchFlo capability
-Mobile Office (2007 would be cool, but I'll settle for 2003)
-Preferably free of all t-mobile junk
-MP3 and video player
-Ability to install other software
I am currently using a t-mobile ROM, version 2.26.10.2 WWE and Windows Mobile 5.1.195 Build 14955.2.3.0. I would like to back up this ROM before starting. I read something about putting in on an SD card, but that was I'll need to keep a mini-SD card just for the backup. In there any way to dump the data into a file that can be stored on the PC (even to the point of dumping it to an SD card and using linux's dd function to create a file on the hard drive)?
My device is SIM unlicked (I'm using a t-mobile device with Canada's Rogers), not sure about a CID unlock.
I ask for links to most recent ROMs that would fit what I'm looking for as well as most recent tutorials. I'm nowhere near the point of trying to create my own ROM, so a kitchen is out of the question. Maybe later.
Help appreciated. Thanks.
This is where you should start:
http://forum.xda-developers.com/showthread.php?t=310831
Follow that and Dr. P's thread. If you can't follow those guides, don't attempt to install a custom ROM on your phone.
Read it already. It doesn't make suggestions as to which ROM to use though.
There are already tons of "which ROM should I use?" threads, and the consensus from all of them is: read about each ROM and then try the one you like the best.
There are no "more recent" upgrading threads. The link I posted and Dr. P's guide are the best. Those guides are meant to explain how to unlock a phone, not which ROM to use.
Follow those guides, unlock your phone, and then experiment with the different ROMs. Oh, and one other thing: before you even attempt to mess with your phone, spend a few days looking around and reading. Trying to read, absorb, and understand all of the posted wisdom on these boards in 12 hours just isn't possible. I spent 4 to 5 days reading and taking notes before I did anything to my phone.
Alright, I see where you're going with this. I'll take a look around, if anything, I'll post back here. Thanks.
I just obtained a new AT&T Tilt (8925) (HTC Kaiser) and I want to use it on the Rogers wireless system in Canada. I can use the phone and text but cannot access the internet and MMS. I spent an hour on with the Rogers Techs and still couldn't get it going. Does anyone have an idea as to the settings I need for the internet and MMS? Also this phone has the AT&T "today" page. How can I change it to reflect the "today" page that I have seen on the HTC "Touch" as I like the big clock and weather aspects.
ljotr1
hello, and welcome to the forum.
check out the wiki's,
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
and the tilt specific wiki...
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
should answer all your questions..
1st result at google !!!
http://www.google.ca/search?hl=en&q=rogers+canada+cab&btnG=Search&meta=
http://forum.xda-developers.com/showthread.php?t=311426
not sure how things have changed ( or not ) ... but I'd previously used this fine with my HTC S621 ... now I'm a TyTN II owner but swear against a data plan in Canada ... now that rogers also announced they will carry the "iPuke" ... owners will be charge through the roof to really benefit the multimedia plan needed to enjoy it !
if this work or not for you, update the result so that someone else can benefit, will ya ?
ljotr1 said:
I just obtained a new AT&T Tilt (8925) (HTC Kaiser) and I want to use it on the Rogers wireless system in Canada. I can use the phone and text but cannot access the internet and MMS. I spent an hour on with the Rogers Techs and still couldn't get it going. Does anyone have an idea as to the settings I need for the internet and MMS? Also this phone has the AT&T "today" page. How can I change it to reflect the "today" page that I have seen on the HTC "Touch" as I like the big clock and weather aspects.
ljotr1
Click to expand...
Click to collapse
I have the AT&T tilt and found that the proxy on the phone is the problem. It is a hidden proxy and you will not see one set in the network options. To turn it off there are 2 proxy files in a folder in the programs menu. One to enable and one to disable. You must use the one taged "ProxyDisable".
Another way is to delete all the network settings and run an updated Connection Wizard file. I tried to attached the one I'm using but the upload keeps failing. The one I use will see the network header from your SIM card and set up all the proper settings for you. I have downloaded several and none seemed to have Canada in the list. The one I tried to attach will prompt if you want to setup on Rogers right away! Surf until your heart's content
Google for "HTCConnectionSetup 1_0_30726_1.cab" and run it directly from your phone.
As for the Kaiser default look you are refering to (also seen on the Touch), you can flash your phone with a cooked rom or the official HTC Kaiser rom. The Tilt is actualy a TyTN II (codename: Kaiser). The only difference with the Tilt is the missing front facing camera and the AT&T boot intro and software. I did not like seeing the AT&T logo on startup as I'm on Rogers so I flashed it with the original Kaiser rom. I have tried many other but currently have Dutty's latest rom and it works well and is feature packed. Another way is to unzip and run the HTC Home file (I could attach the file this time!) from your phone to get the Weather and clock.
I perfer the cooked rom method as they can be much faster and have all the "bloatwere" and trial software removed. Many of them have tools and apps that are very usefull. Check out the rest of the posts in this forum and you will find everything you need to know on flashing your rom, even how to flash back if you need to get the phone serviced.
they just jumped in & asked for help ... then we provided possible solutions for a small consideration ( feedback of what works & not so others could benefit ..etc ) ... and they can't even return the favour !!!
some people !!!
UnicornKaz said:
they just jumped in & asked for help ... then we provided possible solutions for a small consideration ( feedback of what works & not so others could benefit ..etc ) ... and they can't even return the favour !!!
some people !!!
Click to expand...
Click to collapse
I was thnking the same thing!
New AT&T Tilt (8925) can't send SMS
I just bought a new AT&T Tilt (8925) i can phone and connect to the wireless network but i can not send sms text message. I am provider is Rogers. Can someone help?
thanks,
Nam
Your question is already answered!!!
namrose said:
I just bought a new AT&T Tilt (8925) i can phone and connect to the wireless network but i can not send sms text message. I am provider is Rogers. Can someone help?
thanks,
Nam
Click to expand...
Click to collapse
Um... read 3 posts up (my first post on this thread)???? I had answered the first person's question and it will answer yours
My pet peeves:
1. People who do not use the search feature or Google
2. People who do not read the thread they posted to
3. Answering questions that have already been answered by another person asking the same question in the same forum
ur not the only one with those peeves...i'm sure a lot of us have them..especially ones that are really active and helpful
Greetings:
I have searched high and low on many forums and boards for more info on this and not found much so here goes;
I use my WP7 phone for work (I have the HTC Trophy and am on Verizon). I am connected to an exchange server and everything works great EXCEPT email replies; the original email text is NOT included and needs to be especially for work. Reviewing other threads across the web it seems this is normally enabled.
I checked with VZW second tier support and supposedly this feature is turned off on the Trophy. Fine, so I dug around, found an obscure WM6.5 reference to a registry key, poked around my NoDo registry and by trial and error was able to enable it by adding this;
HKLM\Software\Microsoft\Inbox\Settings
Value Name – IncludeOriginal
Value Type – Integer
Value Data – 1
Works great. Now, I am a registered dev and went to upgrade to Mango 7712and did everything possible I could think of (and yes, I know the provxml methods and able to edit my reg in Mango) but I can not get this back no matter where or what reg edit. I also came across someone else on T-Mobile that had this feature enabled on NoDo and went to the Mango RTM and now it does not work.
So, did Mango break this completely? Anyone looked at this on Mango or have any idea what reg key needs to be hacked on Mango?
P.S. This thread might be better in the dev/hack board but I am a Noob.
Digging around some more and need feedback; does the provxml reg edit for Mango on the VZW CDMA Trophy 7 work under any circumstances? It appears it is but it may also be keeping the provxml edits I make at the mid-step point in the Mango process (applied at the 7403 rev before proceeding to 7712). I make the provxml edits in Nodo using the older HTC Connection Setup (new rev does not work as described somewhere else). I then use it again at the 7403 step but have to switch to the new rev on 7712 (old no longer runs). Once I run the new rev HTC connection in Mango I can launch TouchXplorer and am unlocked. I can do all the same provxml processes (email new CustClear.provxml, copy, move, etc) but I am not positive edits are being made. But if my previous edits are kept (which all appear to be) why does my IncludeOriginal key not carry over?
Another note; it appears the main location in NoDo for this hack was HKLM (found using Reg Editor) and not in the HKCU like WM6. Looking at Mango registry dumps this is now in HKCU; is there more restrictive access to HKCU on the CDMA Mango or any version of WP7? I added a HKCU hack to the provxml at all steps just to have it there but did no good.
This brings up a good question - can you edit HKCU the same way as HKLM? I also see the key location I am after moved from Default.hv to User.hv when going from NoDo to Mango; does the provxml work on the whole registry or just the Default hive?
P.S. I have built a process to even get to where I can have TouchXplorer run on the CDMA device from a lot of other threads in this forum and greatly appreciate having everyone's knowledge to use. Thanks!
I am going to add this to the Dev and Hack board.
Odd.. Mine does reply w original text since 7004..
Sent from my LG Optimus 7
I'm having the very same issue. Am using my Dell Venue Pro to connect to my work email, via an Exchange server.
Problem exists in Windows Phone 7, but also in Mango Beta 2. The emai threads show up on my phone when I'm typing a reply, but the recipients don't see them, which often leaves them not knowing what my reply emails are aout.
For now, I'm working around the issue by forwarding emails back tot hem and comenting in the top section.
Would greatly appreciate any help that could be offered to resolve this.
I'm having exactly the exact same problem. It begun with the installation of Mango beta 1. Today I got the official Mango 7720 and the problem is still there. I'm connecting to an Exchange 2003 SP2 infrastructure. I've deleted my account on the phone and create it back and the issue is still there.
Have someone found a solution for this one?
No news on getting this to work (and I have tried, trust me!)...eraffone even mentioned to have this issue. This is not good and I even sent a request to "the phone" at MS about this and got no answer to as why (he did say he would look into it but that was many weeks ago; I have pinged him twice since with nothing).
I am curious to see what MS puts on their compatibility page for comparing WP7 versions with EAS versions and what is and is not supported (but I am guessing this one is a bug or an oversight).
Anyone on the forums having better luck with this using EAS 2007 or higher? This pisses me off and I am NOT upgrading (and down the road who knows what I will end up doing)
WP7 & Exchange 2003
I will also send a request to the "The Phone" with the issue maybe the more noise we make the better chance we have of getting a fix.
I was really banking on that official 7.5 (mango) release would fix this issue. We can't be the only ones who have Exchange 2003 on there corporate networks.
If anyone gets any new information please share it with us.
Thanks
Eric
GO VOTE ON WP7 - this issue is there!!!!
http://windowsphone.uservoice.com/f...-2003-email-reply-issue?ref=comments#comments
Same problem here Started with Mango Beta... My customers are getting confused when they reply to an email several time and I respond with a yes or no they have no idea what I am responding to.
This is a severe deal breaker for me, enough to make me switch back to Android. I have to be able to reply to e-mails without breaking the entire chain or I might as well just get another device.
Everyone vote up the WinPhone Feature Suggestion here:
http://windowsphone.uservoice.com/f...fix-exchange-2003-email-reply-issue?ref=title
And the issues on the Windows Phone answers board here:
http://answers.microsoft.com/en-us/...l-issues/6d00949e-75ef-4364-af84-509faa7cee3e
Then tweet @WinPhoneSupport and the rest of the Windows Phone team. Our voice must be heard!
Thanks!!!
Odd, we have exchange 2010, i have a surround with Mango on it... works fine. Are you using the official released mango? I never had to do any edits. 3 others at work with trophies have no issue either.
Yea, that is odd because mine has done it sine 7004 too.... using LG Quantum - updated to 7720 - and it still does it.
ROCOAFZ said:
Odd, we have exchange 2010, i have a surround with Mango on it... works fine. Are you using the official released mango? I never had to do any edits. 3 others at work with trophies have no issue either.
Click to expand...
Click to collapse
I don't know what version of exchange my company is using right now (they are a big enterprise shop) but I'm almost positive it didn't used to do this. They are however migrating to Exchange 2010 so maybe it will go away for me. This is still a huge issue though.
ROCOAFZ said:
Odd, we have exchange 2010, i have a surround with Mango on it... works fine. Are you using the official released mango? I never had to do any edits. 3 others at work with trophies have no issue either.
Click to expand...
Click to collapse
Yeah official Mango its only any issue with Exchange 2003. 07/2010 are fine.
Houston, we have a solution;
http://wmpoweruser.com/windows-phon...40-coming-to-fix-exchange-server-2003-issues/
ok, first off all I have to say that I have explore this forum searching for this answer, and yes there is some things that are very useful. but, since I'm new in these things (I have some knowledge, but I'm little afraid to do something in which I'm not to familiar), I would love to see best and the simplest way to do with tutorials or reference that is compact (or at least what to do first, second...). So how to jailbreak it to use windows device manager so I can install other apps besides market apps?
here is my sys info:
Model: HTC HD7 T9292
OS version: 7.10.8107
Hardware version: 0002
.NET CLR version: 3.7.11140.0
In the end I must say that I'm glad to be a part of XDA forum among the best devolopers in the world, and I hope so that I will be able to help someone in the future after I get more knowledge and expirience in this area.
There's no working "jailbreak" for an up-to-date HTC phone right now. All you need, though, is a developer unlock; "jailbreak" is usually used to describe something that bypasses or modifies the phone's security settings; developer unlock is a feature built into the phone by design.
Until recently, you could use ChevronWP7 Labs (http://labs.chevronwp7.com) for a cheap dev-unlock, but apparently Microsoft has limited the number of uses of that tool, nd they sold out a month ago. No word yet on if/when they'll get more. In the meantime, there are two official ways to get dev-unlocked:
1: Purchase an AppHub (marketplace developer) account from http://create.msdn.com. $99/year, 10 unsigned apps at once, lets you submit to the marketplace.
2: Get a free student AppHub account through http://dreamspark.com. Requires a student email address and only allows 3 unsigned apps at once, but no cost and also lets you submit to the marketplace (if you're into that; please remember that this is a developer forum, not a "make my phone cool" forum).
Alternatively, you could downgrade your phone to pre-NoDo (build 7004 or 7008), set your computer's and phone's clocks back a year, and use ChevronWP7 Unlocker (not the ChevronWP7 Labs, the original one). Then, look for instructions on staying "chevron unlocked" as you install the upgrades on your phone. It's a mess but it's possible.
To try and increase the number of apps you can install (to an effectively unlimited number), and allow installing apps that use the capability ID_CAP_INTEROPSERVICES (which can be used to get an app more permissions than its sandbox allows) on Mango, you can look up "interop unlock" as well. If you use the legacy ChevronWP7 Unlocker and then carry that forward, you'll almost certainly get interop-unlock included for free (one way to simplify this would be to install the Htc Interop Unlock XAP in NoDo, then upgrade to Mango and follow the unlock instructions after updating).
Maybe it's the best option for downgrade, and than again update on mango. I just want to know is it gonna effect my phone in any way (I mean on bad effect). I'm gonna search here for that options.
Thank you for your answer and for your time. I appreciate it!
@mailman78
Let me know how this all goes for you, as I have the exact same phone (in Australia). I'm wanting to try the downgrade/jailbreak/update route, but would love to know how someone else went about it. Cheers!
I've done it without problem!
1. downgrade bootloader from 5.xx to in my case 1.69 (or other 3.xx, 2.xx, 1.xx)
(http://forum.xda-developers.com/showthread.php?t=1411904)
2. install RSPL and HSPL
(http://forum.xda-developers.com/showthread.php?p=18244911)
3. install custom ROM
(http://forum.xda-developers.com/showthread.php?t=1476058)
Step 2. is VERY IMPORTANT, otherwise you CAN DAMAGE your phone device.
You must consult guys from thread-s that I gave you for Australia, I haven't spot anything about Australia! Before you doing anything, first take a time to read very carefully posts, comments and other things, BECAUSE I live in Europe, and here it's working (it's says europe htc hd7 devices)! In this threads it's explained very smooth and great!
I hope so that you will find something for you.
Best rgds
【DFT Freedom ROM V5 Gold_C 24 Langs Pearl Edition】
【ROM Version】DFT Freedom ROM V5 Gold_C Pearl Edition
【SYS Languages】 USA/CHT/CHS/JPN/KOR/ENG/FRA/ITA/GER/ESN/HUN/CSY/PLK/NLD/DAN/FIN/NOR/SVE/PTB/PTG/RUS/ELL/IND/MSL
【DFT Chef Team】[email protected]
【Release Date】 May,31,2012
【Modle of Device】 Gold_C(HTC Arrive)
【Driver Verzion】 5.02.671.01
【SYS Version】 7.10.8773.98
【Feature】
1，Replace HTC Apps software
2，Due to space problem if you need more HTC Apps open IE click favorites choose HTC_OEM than download you need
3，Few tweaks ,DFT FullUnlock support XAP IE download and install,full play XBL games
4，ISharing,Static MAC Address
5，Keep HTC 2nd boot screen
6，WWE as the default setting, Eastern Standard Time is the default time zone
7，This verison Pearl edition for support @pearlher who help a lot of people, want to know her google @pearlher or check in twitter @pearlher
【Important Note】
1，You must have DFT's RSPL / HSPL installed on your device
2，Flash ROM had risk, be carefull before flash
3，Before doing anything, make sure you have more than 50% battery!
4，Supported Operating Systems: Windows XP, Windows Vista, Windows 7
【Disclaimer】 This product is free to use at your own risk. We take NO responsibility for any conflict, fault, or damage caused by this procedure. No warranties implied or otherwise, are given if you agree to use this product. No problems were found while testing this product on several different devices, your experience may vary.
【Distribution】
●You are free to distribe this ROM ,but only WITH LINK to official source。
●Under official source I am considering this thread on DFT & XDA 。
●This ROM NOT allow for commercial use also NOT allow xda.cn forum, 3G forum to distribe or use this ROM。
●You must NOT use any components from this ROM if you need free feel PM to me for permission。
●I will collect feedback for the future development/improvements of this ROM series。
●Please respect the work。
【Download links】http://www.filefactory.com/file/5yii8702xdpd/n/DFT_Gold_C_24_langs_Freedom_V5_Pearl_Edition.7z
【Special thanks】
DFT developer team member - bepe,Cotulla,mamaich,Ego .....。
Julien Schapman for registry editor and file explorers applications。
【DFT Team】
Filefactory is just not working. I would love to try the rom but can't download. Any mirror links?
UPDATE: After at LEAST 50 tries I got it to download...took many hours haha. Rom is up and running great so far. Thanks a lot!
##Codes still aren't working in the dialer. Not sure why. Just shows field test LOADING....
Does this fix the issue where if you have both Wi-Fi and cellular data enabled, the internet totally stops working until you disable one of them? That's my only real issue with the original DFT Freedom ROM
killerkhatiby009 said:
Does this fix the issue where if you have both Wi-Fi and cellular data enabled, the internet totally stops working until you disable one of them? That's my only real issue with the original DFT Freedom ROM
Click to expand...
Click to collapse
Well I have both cellular data and wifi going and internet is working fine. Is there a more specific test you would like me to try?
thanks mwang!, i've been patienly waiting for your to release this tango build...thank you!
fantastic work. giving it a try.
Is anyone else having trouble updating PRL and network profile with this ROM? Everything else seems to be working fine
Also, I guess unless I am missing something this ROM does not include unlock?
edit: seems unlock is working now but I still cant change prl/network settings
In the features list is says "DFT FullUnlock". It's unlocked.
My network profile and prl updates are not working either.
also, wlan hotspot isn't working me for, I get a message connection not shared there is a problem with the current settings. Anyone else getting this?
^yeah it's not working for me either. Darn, that's a dealbreaker.
Yes its too bad for the network update issues, but thanks anyway
it was a valiant effort
It appears they don't have any gold c phone users to test these roms before release. No big deal... I'm back on ansar's tango rom and it's working perfectly except for ## dialer codes.
I went back to DFT 8107 but I may give ansar's rom a try there arent any real improvements in tango though, better memory management I suppose, though I have never really experienced any memory issues with my phone
turdsamich said:
I went back to DFT 8107 but I may give ansar's rom a try there arent any real improvements in tango though, better memory management I suppose, though I have never really experienced any memory issues with my phone
Click to expand...
Click to collapse
I'd say video and audio mms and multiple image mms is a pretty decent improvement...
yeah, you are right, I forgot about the mms improvements but that isn't something I would get much use out of.
I'd like to try one of the 8773 roms but it appears both have their issues...is one "less buggy" than the other? And is anser's going to be updated any further considering the last update was April 16?
So the ## dialer codes do not work on this rom? And also from what I gather the Internet sharing doesn't work either? Also the update network profile/pro don't work either? It seems like every single sprint htc arrive rom has this same problem. Also on every single rom image tried, the data switches to 1x a lot and the gps cuts out in the middle of a navigation. I do not know if that is linked to the data issue or not but u will be driving and than all of a sudden it will just re route you. Than when you look at the phone it will be a big fat 1x. It's pretty annoying. That so far is the only bug I have seen with the wp7 custom roms unfortunately it's a pretty big deal.
Has anyone found a rom that doesn't have these issues?
ansar's gold_c tango rom is working great for me. Other than the ##codes I don't have any issues that I am aware of.
update please
all thanks. found this fw