Database Info

Irritating Creak / Snap Noise When Pressing Call Button

I have a Sprint Touch Pro. It makes this annoying snapping sound when pressing down on the call button on the bottom left hand corner, as if the chrome faceplate isn't completely or loosely screwed into the black under-pinning piece. Does anyone else have this issue?

I have a similar problem
Otherbeing said:
I have a Sprint Touch Pro. It makes this annoying snapping sound when pressing down on the call button on the bottom left hand corner, as if the chrome faceplate isn't completely or loosely screwed into the black under-pinning piece. Does anyone else have this issue?
Click to expand...
Click to collapse
My keyboard makes a cheap creaking noise when I type. If I press the battery cover in the area around the camera, I hear the same noise. Is there any simple fix for this, it's pretty annoying.

Otherbeing, I think what you hear is the crackle from the speaker....I have it too!

battery noise
for a simple fix to the battery noise, (this is gonna sound really cheap)
fold up a piece of paper and put it on the battery and then put the back cover on... it works...
might take you two or three tries to get the right size and set, but once you have it down, its easy,
and yea it works... (yes i know this is really cheap sounding)

my fuze rattles

When the screen is up to expose the keyboard there is a rattling sound. When the keyboard is down, no rattle.
who else has experienced this?
Do you think I should return it? If not, do you know what it is that rattles?
( this is not the "spring noise" that I have been reading about, at least I don't think it is)

mine does that
when its slid open there is a piece on the screen part on the side with the camera that can b moved
duno if its normal

Do you mean to say I can see the cause of the noise if I take the battery cover off, or did you disassemble your phone to find it?

no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles

well at least now I know what is rattling, thanks

np
but i would like to know if everyone has this

lbhocky19 said:
no no
just slide the screen out
turn it over
when u look at the back ul see an indent that can be pushed in and out slightly it rattles
Click to expand...
Click to collapse
I see the same thing. looks like a cover plate for something.

Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.

It's the ribbon cable that connects the two halves of the phone. There is a little trap door there that covers it up while in the open position. If you watch it as you close the phone, the door opens as you slide it closed. But as it does that, it put tension on the spring, the tension keeps it tight when the phone is closed. When you open, no more tension and it has a little play in it. They should have spec'd the spring to have a little tension on it even in the open position so it would hold it still like when it's closed.
Oh well, probably some reason for it. Nothing to worry about at all though.

I was talking to my buddy at ATT last night. All the Fuze's have the rattle including mine. Nothing to worry

as long as it keeps the damn white screen away im happy

as long as it keeps the damn white screen away im happy

ya I was checking that out, it does look like all they needed was to keep a little spring tension on the door even when its all the way out

petard said:
Yeah i noticed it, too.
It isn't too bad but it is a little annoying.
If you slide that piece enough, you can see a ribbon cable.
Click to expand...
Click to collapse
Mine rattles when closed. annoying

It's a little annoying, not because of the sound but because it makes it seem that much less unfinished. For our money we shouldn't get rattling phones.

My Fuze never rattled til now...
Well, this seems to be a big issue. On mine, the spring doesn't seem to keep the trap door on the back of the display shut at all, its almost "jamming" sometimes when you close the keyboard. I shouldn't have to check to make sure nothing is in the way when retracting the keyboard.
I almost want to scotch tape the black trap door shut to keep it from moving around.
There is a "silver" rectangular metal plate connected to the tension spring that seems to have come loose somehow.
The black door can be slid back and forth freely, as there is "nothing" holding it shut.
I don't like lose metal parts moving around inside my electronics that aren't connected to things they should be. Not at what we paid for this thing.
I see dust problems in the display in the future. I wonder if its time for warranty action?

Screen (Slider) Way Too Loose [SOLVED]

My fuze screen has became way to loose in the closed position. To provide a better example its like its got a hinge and wants to flip open rather then slide open. There is way too much up/down movement that way. Its so loose that when it vibrates the screen will vibrate on the casing and it makes or horrible rattle sound that makes me cringe every time I hear it. I have to hold the phone tight in my hand to stop the rattle. The weight of the screen will actually cause it to partly open by just flipping the phone over and holding the back.
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?

I have a similar problem but not as severe. Mine is just a smidge loose and when I press down on the side of the screen it slides a few millimeters and it's really annoying when I hold the phone. Any help fixing would be appreciated.

yea same here, it's not annoying but I don't trust it

qtipextra said:
Aside from duct tape, any good ways to fix this or tighten the mechanism that holds it position?
Click to expand...
Click to collapse
When I originally mentioned duct tape, I was being sarcastic. Ironically, however, this is my fix to this problem.
I used the Gorilla Tape brand, because that's what I had. All I did was put three pieces of black gorilla tape on the back of the slider. This tightened it up, and stopped my annoying rattle. Pretty simple and easy fix.
Also, it made the snap feel when it slides out much more firm, and I really enjoy the feel of it much more now.

[Q] Button problem (read to get an idea)

So there is this thin plastic-ish strip on top of the button ic but under the physical button, just open your back cover and you'll have an idea of what i am talking about, it has this black center and is goldenish color the rest.
So, I was opening the cover and that 'thing' from the power button and volume + button fell off, I didnt pay much attention, but now those 2 buttons wont work on there own, still I can get them to work by opening the cover and using something pointed, so as far as the IC or the chip or whatever it is, is still fine.
I need some suggestions on some makeshift ideas on how to fix it so the buttons will work with the cover on. Also if possible, anybody know if the mobile guys fix it and how much it costs? Dont worry about where you live, I just want to have a rough idea I dont like walking in to a mobile mall and feeling all dumb
Thanks in advance, and the other thanks you'll all receive anyway for helping

Fas1h said:
So there is this thin plastic-ish strip on top of the button ic but under the physical button, just open your back cover and you'll have an idea of what i am talking about, it has this black center and is goldenish color the rest.
So, I was opening the cover and that 'thing' from the power button and volume + button fell off, I didnt pay much attention, but now those 2 buttons wont work on there own, still I can get them to work by opening the cover and using something pointed, so as far as the IC or the chip or whatever it is, is still fine.
I need some suggestions on some makeshift ideas on how to fix it so the buttons will work with the cover on. Also if possible, anybody know if the mobile guys fix it and how much it costs? Dont worry about where you live, I just want to have a rough idea I dont like walking in to a mobile mall and feeling all dumb
Thanks in advance, and the other thanks you'll all receive anyway for helping
Click to expand...
Click to collapse
Well, you can easily fix it yourself if you are a bit smart. Just try to stick a box shaped paper tape at that place where the plastic broke off from.
Cut tape in a small rectangle. Then cut that rectangle into many small pieces of same size and form a small rectangle. Then stick them to the place where "that thing" came off.
You can also use a double end sticky tape but usually the thickness is defined so I am not sure if that will help.
HTC Sensation is an old phone however, you should easily find old bodies/ new cases to replace your current body.
Good Luck

Thanks my explorer had a similar problem Its original back cover's buttons worn off, so I folded up a piece of paper and stuck it there and used a cover over the worn out back case. With sensation there is no way to make the paper stay in the same place, i didnt think of paper tape or double sided tape, will give it a shot.

[Q] Tapping on upper middle of screen makes rattle vibrate sound like something loose

Do any of you have this issue?
When you tap on the middle upper of the tablet a little bit hard it causes a vibrate clicky loose sound like the components behind are loose?
I only noticed it today and im sure it wasn't like this before or if it was not so prominent.
Im out of my retailers return window so if anything needs to be fixed I'll have to go to samsung.
The device functions ok but im just a little concerned the screenis coming loose or thr digitizer..thevibration clicky sound is quite annoying and i can't remember if it used to be there i think it might as directly behind where it rattles is the camera and above the battery and speakers. I just hear and feel a vibrating rattling sound which annoys me and feels like the build is poor. Can you guys try tapping the middle upper of your tablet quite hard or moderqtely and see if you have same issue?
What do you think has happend screen coming loose?

I think the resistive and conductive layers of the screen have come loose from the hard tapping.
If i hold down the middle of the screen and release it makes a 'sticky' sound. What is likely to happen if this continues?
From reading it says the resistive and conductive layers come in constant contact meaning it. Ould misinterpret commands.
Is it possible the screen is just loosened from the digitizer or is it more likely the 2 layers of resisitive and conductive layer are loose?

Does anyone know what this is?
It is so annoying in certain parts of the screen it seems to be looose hence the tapping. Is the glue loose or the screen coming apart?
If i lie it flat on a table there is less rattling when i type but when i put it in my case to hold it up the clicky rattling sound is more im just worried it's going to collapse at some point. Can anyone fathom what might be causing this?
It feels like the creen has come loose slightly in certain parts of the screen as if i tap on the opposite side across the screen it seems to c9rrect this issue for a few secs which leads me to think the screen is coming loose

Ive just realised now it's the back cover which is loose or the insides.
It seems by me pressing down on the front screen too much and the back of the tablet not completely heald down on a flat hard surface t has somehow caused the back cover to come loose of the parts inside have come loose by being forced back slightly.
Does anyone guess what is hppening?
When i flip over the tablet and press the back and tap the back cover on the right side it sounds loose and if i press on it there is some give like there is some space.

So ive identified what is thr cause of this and it's that my case which has rubber corners which hold it against the back of the backbpard leaves a gap between tge tablet and the backboard of the case cover. When i tap the screen too hard it causes a flex ehich unfortunately has caused the tablettobend and push the motherboard and insides onto the back cover which hss now flexed and stretched i presume? Or it has xaused the components to dislodge and misplace, can the back cover actually stretch this much?ithought it wad hard pladtic that retains its shape
I heard the tab s creaks also but mine is the back cover has stretched out fr8m within not holding the components snuggly if that makes sense. What is the fix for this?