How do I gain root after taking the gingerbread OTA???? Thanks
tracyt said:
How do I gain root after taking the gingerbread OTA???? Thanks
Click to expand...
Click to collapse
Been looking for 2 days myself. I want to keep stock everything, but gain root access. Hopefully someone can help us!
Seriously this exact subject.has been listed like 15 times freaking search dude its every where
Sent from my Gummy Charged GBE 2.0 using xda premium
http://db.tt/igmKjoYS
Once your completely stock flash CWM in Odin one time then boot directly into it don't let the phone boot up our you'll have to reflash CWM. Then flash this file and you'll have root
Sent from my SCH-I510 using xda premium
I have complete step-by-step directions on how to root at the link below...
http://www.toms-world.org/android/#rootInstructions
bfitzpatrickd2d said:
Seriously this exact subject.has been listed like 15 times freaking search dude its every where
Sent from my Gummy Charged GBE 2.0 using xda premium
Click to expand...
Click to collapse
This. You can't possibly be so blind/stupid as to NOT see instructions.
Sent from my GT-P1000 using xda premium
+1
Sent from my Gummy Charged GBE 2.0 using xda premium
I followed the instructions and gain root but it doesnt stay. If I do the anything I lose root.
What do you mean "you lose root?" Once you have flashed the Superuser Pack to the phone you have permanent root, it doesn't just "go away" like "poof" it's gone.
However, CWM (Clockwork MOD) does go away unless you load a custom kernel or deactivate (CHMOD to 000) "/system/etc/install-recovery.sh".
I dont remember which app I install but it will say you dont have root even though I just rooted and it said I did,I reboot and clockwork is gone. Now I am having a hard time getting back. Guess I might go back too EE4 take update and go and see what happens from there. Right now Im stuck on the samsung logo after I followed the directions.
Ok I just loaded the ep4d bloat rooted version and it started and will just freeze what I dont want.
Nope boot loop. Gonna check out the other thread then restart everything. oh well
I found that if I use the app Quick reboot and try to go into recovery it removes root.
blueis300 said:
I found that if I use the app Quick reboot and try to go into recovery it removes root.
Click to expand...
Click to collapse
that isn't my experience. I just booted into CWM recovery from quick boot, rebooted and retained root (downloaded root checker to verify)
I am running stock OTA.
I odin'd CWM, then rooted with imoseyon's 4.0 then flashed the superuser zip from recovery.
obededom said:
that isn't my experience. I just booted into CWM recovery from quick boot, rebooted and retained root (downloaded root checker to verify)
I am running stock OTA.
I odin'd CWM, then rooted with imoseyon's 4.0 then flashed the superuser zip from recovery.
Click to expand...
Click to collapse
That's how I did it but I go to stock recovery when using quick reboot. I know I had root from the other apps I had.
i have used this method on a stock GB 2.3.6 and it stops at the samsung logo.can someone help
kcmccombs said:
i have used this method on a stock GB 2.3.6 and it stops at the samsung logo.can someone help
Click to expand...
Click to collapse
doing what? flashed superuser or a kernel...? its a bad thing to do so I kinda hesitate to recommend it but a battery pull and reboot usually makes the phone power on like normal after a bootloop from flashing something
sent from my Acer Iconia A500 beast of a tablet via XDA app
Related
I used to run custom ROM serendipity 5.11. Decided to give the official stock froyo a try. So, I flashed it to JF6 and installed I897UCKB1 on my captivate. Now, I miss the root privileges and also the stock ROM is still not smooth. There is a big improvement from 2.1 but not there if I compare with serendipity. So, is there any way I can root and install lagfix on my stock I897UCKB1 2.2 captivate? Please help
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
I used to run custom ROM serendipity 5.11. Decided to give the official stock froyo a try. So, I flashed it to JF6 and installed I897UCKB1 on my captivate. Now, I miss the root privileges and also the stock ROM is still not smooth. There is a big improvement from 2.1 but not there if I compare with serendipity. So, is there any way I can root and install lagfix on my stock I897UCKB1 2.2 captivate? Please help
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
There are many many threads going on here that covers this. Either get a custom ROM from Cog4 or Torch 1.5. If not then use SuperOneClickv1.6.5-ShortFuse and http://forum.xda-developers.com/showthread.php?t=870760 for lagfix
Same Here
I tried rooting the phone the traditional way and it tells me the update.zip is not e_signatured (or some thing like that) verified. How do we root the NEW Froyo Stock ROM??
Greatly appreciate any assistance on this!!!
Viper
Viper714 said:
I tried rooting the phone the traditional way and it tells me the update.zip is not e_signatured (or some thing like that) verified. How do we root the NEW Froyo Stock ROM??
Greatly appreciate any assistance on this!!!
Viper
Click to expand...
Click to collapse
The assistance was in the post right above your own.
The reason the old update.zip method does not work is because Froyo uses 3e recovery, which requires the update.zip files to be signed. The SuperOneClick root bypasses that and directly gives you root. After this you can install CWM, and flash the supercurio voodoo kernel, which gets you the lagfix, and rids you of 3e recovery, all at the same time.
rajendra82 said:
The assistance was in the post right above your own.
The reason the old update.zip method does not work is because Froyo uses 3e recovery, which requires the update.zip files to be signed. The SuperOneClick root bypasses that and directly gives you root. After this you can install CWM, and flash the supercurio voodoo kernel, which gets you the lagfix, and rids you of 3e recovery, all at the same time.
Click to expand...
Click to collapse
I was planning to do the voodoo installation right from phone. Looks like I cannot do that right? -----Unrooted I897UCKB1 froyo captivate
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
I was planning to do the voodoo installation right from phone. Looks like I cannot do that right? -----Unrooted I897UCKB1 froyo captivate
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yeah - I could not get it to work on the phone - so I went with OCLF which uses ex2.
It worked fine.
dozyaustin said:
Yeah - I could not get it to work on the phone - so I went with OCLF which uses ex2.
It worked fine.
Click to expand...
Click to collapse
How do I get OCLF?
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
I was planning to do the voodoo installation right from phone. Looks like I cannot do that right? -----Unrooted I897UCKB1 froyo captivate
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
You can install the voodoo kernel via odin, but that can't be done straight from the phone. It is also packaged as a CWM flashable update.zip, so you could do it that way, but you still need a computer to root it first. Without root, you can't get into a non 3e recovery, and without that, you can't flash the package straight from the phone.
rajendra82 said:
You can install the voodoo kernel via odin, but that can't be done straight from the phone. It is also packaged as a CWM flashable update.zip, so you could do it that way, but you still need a computer to root it first. Without root, you can't get into a non 3e recovery, and without that, you can't flash the package straight from the phone.
Click to expand...
Click to collapse
Prior to the current stock 2.2, i used serendipity custom rom on my phone. i used AIO toolbox for captivate to flash serendipity custom rom. can i use the same tool to root my 2.2 phone? i am very new to this whole stuff. i see that this particular voodoo kernel provided significant performance improvement on the stock I897UCKB1 captivate. If you can provide step by step guidance that would be great. thanks
I'm rooted and have the 3e problem....i go into recovery with CWM but update fails...tried the 3e patch that accepts unsigned but sbin recovery is read only won't let me delete/overwrite....tried an emu to chmod but says permission denied lol....i must be missing something.... I'm familiar with os but can't seem to figure this. Only thing stopping me from voodoo lagfix is damn recovery file not being deleted
Sent from my SAMSUNG-SGH-I897 using XDA App
ConeyKiller said:
I'm rooted and have the 3e problem....i go into recovery with CWM but update fails...tried the 3e patch that accepts unsigned but sbin recovery is read only won't let me delete/overwrite....tried an emu to chmod but says permission denied lol....i must be missing something.... I'm familiar with os but can't seem to figure this. Only thing stopping me from voodoo lagfix is damn recovery file not being deleted
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Then how did rajendra82 do this?
Sent from my SAMSUNG-SGH-I897 using XDA App
rajendra82 said:
The assistance was in the post right above your own.
The reason the old update.zip method does not work is because Froyo uses 3e recovery, which requires the update.zip files to be signed. The SuperOneClick root bypasses that and directly gives you root. After this you can install CWM, and flash the supercurio voodoo kernel, which gets you the lagfix, and rids you of 3e recovery, all at the same time.
Click to expand...
Click to collapse
I used superoneclick1.7 to root my phone. it ran and said the phone is rooted. Installed superuser. After that i downloaded ROM Manager and chose flash clockwork recovery ..it did the same. but when i get back into recovery using 3 button combo, it is still on 3e recovery and it is not allowing to run any .zip file. how did you do it? pls share the secret. i have the voodoo kernel ready to flash but i have no means to do it...come on buddy help me out
OP try this
root explorer
mount R/W
/system/bin
rename recovery to xxxxxrecovery
drop 3e recovery in this folder
reboot
done
tzabka said:
root explorer
mount R/W
/system/bin
rename recovery to xxxxxrecovery
drop 3e recovery in this folder
reboot
done
Click to expand...
Click to collapse
i reached until renaming recovery to xxxxxrecovery. but the problem is i could not see the folder /system/bin when i connect my phone to the computer..gave up...thanks for the help though..
if you can then pls give a little bit more help..i have always dropped .zip files in the main directory of the phone and have flashed custom roms before..this one is difficult for me...
Looks like I will never be able to put voodoo lagfix on my stock 2.2 captivate. Lot of help posted here but none seem to work for me. I may need more detailed step-by-step instructions.
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
i reached until renaming recovery to xxxxxrecovery. but the problem is i could not see the folder /system/bin when i connect my phone to the computer..gave up...thanks for the help though..
if you can then pls give a little bit more help..i have always dropped .zip files in the main directory of the phone and have flashed custom roms before..this one is difficult for me...
Click to expand...
Click to collapse
the answer was already given to you....you need root explorer or super manager....this isnt done from your computer.
Is there a way to undo this and put the new recovery back without using odin one click and upgrading again?
Sent from my SAMSUNG-SGH-I897 using XDA App
rajendra82 said:
You can install the voodoo kernel via odin, but that can't be done straight from the phone. It is also packaged as a CWM flashable update.zip, so you could do it that way, but you still need a computer to root it first. Without root, you can't get into a non 3e recovery, and without that, you can't flash the package straight from the phone.
Click to expand...
Click to collapse
you can do it on the phone via the kernel flasher app from market
bames said:
you can do it on the phone via the kernel flasher app from market
Click to expand...
Click to collapse
The SGS kernel flasher app page in the market says "*lagfix detection is not finished". What does this mean? I am planning to flash voodoo lagfix kernel on my stock froyo captivate. Please let me know
Sent from my SAMSUNG-SGH-I897 using XDA App
antonyvijai said:
Looks like I will never be able to put voodoo lagfix on my stock 2.2 captivate. Lot of help posted here but none seem to work for me. I may need more detailed step-by-step instructions.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Try Cognition 4, it's about as close to current stock with Voodoo injected. If you really miss any of the apps taken out, Designgears was kind enough to put them in a repository for you.
I am having issues with rooting via kernal. I tried to flash a kernal with Cwm but it would just hang. Pulled battery and tried again. It may be a problem with Cwm? Could someone tell me what color latest cwm should be and is it supposed to have a back up option on it? Tia!
Sent from my SCH-I510 using XDA App
cookemandan said:
I am having issues with rooting via kernal. I tried to flash a kernal with Cwm but it would just hang. Pulled battery and tried again. It may be a problem with Cwm? Could someone tell me what color latest cwm should be and is it supposed to have a back up option on it? Tia!
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
latest CWM is the orange 4.0.1.4 version... if you're having problems rooting just flash a superuser.zip, search the dev section for it as myself and others have posted it recently
Sent from my SCH-I510 using XDA App
Thanks. When. I flashed cwm yesterday it said passed but I now have a blue recovery and it says something about samsung recovery which I am assuming is the stock recovery. I will try to reflash again when I am near a windows machine.
Sent from my SCH-I510 using XDA App
cookemandan said:
Thanks. When. I flashed cwm yesterday it said passed but I now have a blue recovery and it says something about samsung recovery which I am assuming is the stock recovery. I will try to reflash again when I am near a windows machine.
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
use this CWM: http://forum.xda-developers.com/showthread.php?t=1112804 and flash the attached superuser.zip
Thanks dude is will try it when I get some time!
Sent from my SCH-I510 using XDA App
OK I tried to reflash cwm with odin with more times with different usb ports and a stock cable. Once with auto reboot and once without and both times said success and both times I booted into recovery and it is the stock recovery! This phone is no og droid that is for sure! Any suggestions? All I really want is pb and j to kill bloatware if the new update is coming soon now that Steve kondik is with samsung I will just wait!
Sent from my SCH-I510 using XDA App
cookemandan said:
OK I tried to reflash cwm with odin with more times with different usb ports and a stock cable. Once with auto reboot and once without and both times said success and both times I booted into recovery and it is the stock recovery! This phone is no og droid that is for sure! Any suggestions? All I really want is pb and j to kill bloatware if the new update is coming soon now that Steve kondik is with samsung I will just wait!
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
ok well this should do it:
1. power off phone and take out battery
2. open odin on your pc
3. hold volume down button and connect to pc, should show download mode and should show up in odin, let go of volume down
4. put battery back in, uncheck 'auto reboot' and put the CWM file in PDA
5. push start and let odin flash the file, should only take a few seconds
6. unplug phone from pc, then remove battery
7. put battery back in
8. hold volume up, home button and power button until you see 'Samsung' then let go of power button
that should get you into CWM and you can work from there, since you don't have a custom kernel to make CWM 'stick' on your phone do not let the phone boot up or you will need to odin CWM again... you basically get one try with it
That must be my problem i will try
Sent from my SCH-I510 using XDA App
I am flashing the kernal via cwm should I still flash the SU file or will PBJ keep root access?
cookemandan said:
That must be my problem i will try
Sent from my SCH-I510 using XDA App
I am flashing the kernal via cwm should I still flash the SU file or will PBJ keep root access?
Click to expand...
Click to collapse
it should root you but in case it doesn't no big deal just flash the superuser.zip
blazing through on my 4G Droid Charge
It rooted fine without thanks again!
Sent from my SCH-I510 using XDA App
unable to load su zip file using CWM
The phone is a charge with CWM 4.0.1.4 installed. When attempting install su 2.3.6.3 efgh from the sd card with CWM the result is an error message relating to bad package.
Has anyone had success with this su ? Thanks Dan
dansawyeror said:
The phone is a charge with CWM 4.0.1.4 installed. When attempting install su 2.3.6.3 efgh from the sd card with CWM the result is an error message relating to bad package.
Has anyone had success with this su ? Thanks Dan
Click to expand...
Click to collapse
might have been a bad download, maybe re-download and try again
blazing through on my 4G Droid Charge
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge
sweet thanks
Sent from my SCH-I510 using xda premium
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge
Ok just got this phone and have decided to go with Phoenix Blood rom, but how do i start? I have to be on froyo to root? Im coming from samsung epic on sprint that i flashed so im not completely retarded. Thanks for any help
Use superoneclick to root on froyo.
If your on 2.3.3 gb there's a flashable. Zip in development section to root.
Also you will want to use tgagunnmans nvflash method to install clockworkmod recovery in dev section.
Phoenix blood is a great choice btw, enjoy!
Sent from my LG-P999 using xda premium
You're still on Froyo? To my understanding it's a good idea to flash the OTA GB first so that you'll get the up to date baseband. Once that's done just go ahead and flash PB.
no im on gb jsut thought i had to go back to froyo to root, so i just flash clockwork mod then pb and thats it?
reeshmd23 said:
no im on gb jsut thought i had to go back to froyo to root, so i just flash clockwork mod then pb and thats it?
Click to expand...
Click to collapse
Yes, but make sure you're using NVFlash to get CWM. Don't use Rom Manager.
Easiest way is using the tool unlockroot. It supports gb on the G2X. Or you can use nvflash, whichever you prefer.
Sent from my LG-P999 using XDA App
redmonke255 said:
Easiest way is using the tool unlockroot. It supports gb on the G2X. Or you can use nvflash, whichever you prefer.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
If he wants to change Roms he will still need Nvflash regardless how he gets it rooted.
GTWalling said:
If he wants to change Roms he will still need Nvflash regardless how he gets it rooted.
Click to expand...
Click to collapse
Agree. Nvflash=bullet proof.
what is nvflash?
reeshmd23 said:
what is nvflash?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1056847
From that thread:
Flashing the custom recovery using NvFlash is the only way to ensure that in the case your phone will not boot up, you will be able to get into recovery to fix the issue / flash a ROM / restore from nandroid backup. That is what this app will do for you.
If you flashed the ClockworkMod recovery from ROM Manager it does not flash the recovery to your phone, it fake flashed it. The only way you can gain access to ClockworkMod recovery is through ROM Manager at that point. Using this method is the only way to flash recovery so it is persistent and accessible booting to recovery.
If you have already flashed through ROM Manager you can still proceed with this method. Flash Away!
(You can use both ROM Manager CWM and have the nvflashed version working together. You just access either or one at a time, having the nvflashed one means you can boot to CWM. Welcome to Tegra2)
Click to expand...
Click to collapse
Follow the link. This is a must for tegra 2 based phones. It is always better to be safe than sorry and it also allows you to do a ton of other things, such as making backups and flashing roms. Let us know if you need help. The phone is pretty much unbrickable after you do this. It gives you the ability to recover from any major mistake.
Its in the dev thread, it low level flashes clockworkmod recovery to our phones internal memory partition. You need to install apx drivers first in order for the g2x to be nvflashed.
Sent from my LG-P999 using xda premium
thanks for the help guys got it all set up
Just to add in, nvflash allows u to boot into cwm recovery whenever u want and u don't need to be next to a computer. I think that is how it worked for Samsung phones and Odin, where u needed a computer, but haven't used a Samsung phone so I could be wrong. Remember always make a back up of everything and play around with the different roms, not every rom works for everyone
Sent from my LG-P999 using xda premium
Actually Odin is just like nvflash. It is used to put cwm on you phone and to put the stock recovery back on.
Once you have cwm you can flash what ever rom or kernel without the need for root. Just back up your stock unrooted stock rom before flashing anything else.
If you do that you will have your own stock backup with no need of finding it in the forums if you need to go back to stock.
Sent from my LG-P999 using xda premium
Any ideas? Was on infinity? before this. wiped everything, flashed eclipse and the kernel file. Have lost su access? What do I need to do?
woolster22 said:
Any ideas? Was on infinity? before this. wiped everything, flashed eclipse and the kernel file. Have lost su access? What do I need to do?
Click to expand...
Click to collapse
First, make sure you have flashed the latest cwm0302);
http://forum.xda-developers.com/showthread.php?t=1112804
then go into cwm and run "permission fix", reboot phone.
If that didn't fix your issue, then download superuser pack and follow instruction:
http://www.toms-world.org/android/page/rootinstructions
Good luck.
Same thing happened to me. Flashed 1.4 and lost root... Fixing permissions did not help. Is Odin my only way to get root back?
Sent from my SCH-I510 using XDA App
fleabubble said:
Same thing happened to me. Flashed 1.4 and lost root... Fixing permissions did not help. Is Odin my only way to get root back?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
did you try this? use Cwm and flash the superuser zip package.(superuser package can be download from link below)
EDIT: make sure you mount /system before flashing. Also did you Odin the latest cwm and use this to fix permission??
http://www.toms-world.org/android/page/rootinstructions
Bingo... I forgot to mount system before flashing superuser
Thanks
Sent from my SCH-I510 using XDA App
i think its a pbj thing, cuz it happened to me too, but i flashed TS, not eclipse. once i flashed superuser all is well.
That was it, had to mount system and flash the superuser pack again. Thanks for the help/link!
Sent from my SCH-I510 using Tapatalk
I'm so damn glad this thread exists because it just happened to me this morning . The community is dope
Sent from my SCH-I510