So I flashed back to stock, did the ota update. Rooted with the superuser zip through cwm and deodexed per instructions from danalo1979. I flashed ics fugu tweak. I'm trying to get v6 supercharger to work. It fails- I think its because of the busybox. I don't if it is because it needs installed or its a newer version... Any suggestions? Thanks
EDIT: Solved- downloaded JRummy's app from the market to install Busybox
Thought it had to be below version or at least 1.82 or something like that? Are you running as root?
Yes, I figured it out. I download JRummy busbox installer and selected the 1.82 version per the instructions here
Related
i have rooted my xoom properly and i have my xoom on brd 1.6 ghz riptide kernel..but i have problems using titanium backup...whenever i install it, it says root priveleges not acquired....but other apps like screenshot er, setcpu work perfectly...what to do?????
Install a newer busybox, like 1.8 with stericsons busybox installer from the market
I had to install an app called busybox installer. I also had to go into SU and remove busybox, then it asked for root priv's again, Say yes then everything should work.
Hi guys, i am a new user of this incredible forum! I hope this section is the correct one to post a problem...
As the title explains, i have a problem with Semaphore 2.4.0: I have installed 2.3.6 JW1 stock rom and after that flashed the Semaphore. After having done it, i still have not root access, instead ClockWork works fine. what can i do to fix this? I would like to flash Jetpack rom, so i need root permissions. Thanks a lot!
EDIT: i have just seen this FAQ in Semaphore site:
Q: I flashed Semaphore kernel but I can't have root access.
A: Semaphore installs only the su binary. You have to download Superuser application from Android Market to complete your phone rooting.
in fact now it works perfectly!!
Sorry for having created this thread: you can delete it with no problems...
Sorry again.
I have find a new supersu here
http://forum.xda-developers.com/showthread.php?p=23427715
It is working good so far. Is it possible to remove the original super user bundeled with the custom roms. Or it can get some bad effect on custom rom.
Yerp saw this back in march...see it's been updated....:thumbup:
Thx
Probably not that great. Superuser is used universally for a reason.
wayzata said:
Probably not that great. Superuser is used universally for a reason.
Click to expand...
Click to collapse
guess you know this because.....
Actual it is....but you prob installed it and ran it huh?
I have deleted the /system/app/SuperUser.apk through Root Explorer
SuperSu is working fine.
(It should only be done after installing SuperSU from the market, then run it a popup will come up asking to update binary say yes.)
Bought it a while back to support Chainfire.
wayzata said:
Probably not that great. Superuser is used universally for a reason.
Click to expand...
Click to collapse
And you would be wrong. SuperSU comes from a well respected developer (Chainfire), and was created because Superuser has some major bugs that ChainsDD still hasn't fixed - such as su crashing if Android wasn't fully booted. (This was a pain for me for CM9 work when combined with their new "don't default to root in ADB" policy. ADB not going straight to root + broken su = pain)
Most I9100 and N7000 firmware developers have switched over, and when on Touchwiz firmwares I have too. Superuser's one advantage - it's open source which is why it is in CM9, I don't believe SuperSU is.
Entropy512 said:
And you would be wrong. SuperSU comes from a well respected developer (Chainfire), and was created because Superuser has some major bugs that ChainsDD still hasn't fixed - such as su crashing if Android wasn't fully booted. (This was a ****ing pain in the ass for me for CM9 work when combined with their new "don't default to root in ADB" policy. ADB not going straight to root + broken su = pain)
Most I9100 and N7000 firmware developers have switched over, and when on Touchwiz firmwares I have too. Superuser's one advantage - it's open source which is why it is in CM9, I don't believe SuperSU is.
Click to expand...
Click to collapse
Would you recommend using SuperSU over superuser in CM9?
stratatak7 said:
Would you recommend using SuperSU over superuser in CM9?
Click to expand...
Click to collapse
Not in CM9
Entropy512 said:
Not in CM9
Click to expand...
Click to collapse
so for any ROM other than cm9, you recommend it? and if so, how would you recommend we install? i assume we need to install it first, then update, then delete the "regular superuser"?
TDuran said:
so for any ROM other than cm9, you recommend it? and if so, how would you recommend we install? i assume we need to install it first, then update, then delete the "regular superuser"?
Click to expand...
Click to collapse
Just for kicks, I installed it and tried it. This probably isn't the "proper" method and you could possibly mess something up but anyway here is what I did: 1. Delete superuser.apk from your app folder in /system. 2. In Play store download superSU and install. It will ask you to update binaries. Do it and you should be golden.
**Delete files at your own risk** I used Root explorer and make sure you mount app folder as r/w before deleting and then put it back to normal when you're done.
failed... on galnet miui.. time to reinstall old SU
I have flashed the infusion kernel and old super user came back again. It means rooted kernel got Super User pre-packed with them
Working great for me on the infuse and the nook. Both cm9. CF is a great dev.
Sent from my NookColor using Tapatalk 2
ndhanta said:
I have flashed the infusion kernel and old super user came back again. It means rooted kernel got Super User pre-packed with them
Click to expand...
Click to collapse
Yes. Many Rom devs include SU.
Sent from my Emancipated Infuse having Communion.
ndhanta said:
I have flashed the infusion kernel and old super user came back again. It means rooted kernel got Super User pre-packed with them
Click to expand...
Click to collapse
This is one of the reasons I removed autorooting from my kernels.
In my case, I just flashed the CWM-flashable SuperSU package in CWM - It will automatically remove legacy Superuser I believe.
I personally would like to see it in CM9 (or at least the Superuser problems that caused Chainfire to write SuperSU fixed) - but I believe that the free version of Superuser is open source while SuperSU is not (I could be wrong about this).
I am not getting any source information of SuperSu. It seems closed source.
Entropy512 said:
This is one of the reasons I removed autorooting from my kernels.
In my case, I just flashed the CWM-flashable SuperSU package in CWM - It will automatically remove legacy Superuser I believe.
I personally would like to see it in CM9 (or at least the Superuser problems that caused Chainfire to write SuperSU fixed) - but I believe that the free version of Superuser is open source while SuperSU is not (I could be wrong about this).
Click to expand...
Click to collapse
SuperSU is free on the market (there is also a $$ pro version). I'm seeing the same thing ndhanta is with the infusion kernel. There is a script called install_su.sh which does the old ef su install but I haven't been able to track down the parent script that calls it, or figure out where the $source and $dest variables are being set... I'm assuming it may be possible to stop the script from performing the su install by changing the modify date of the file specified in the $dest var.
Any chance a version of the 4.4.12 GB kernel might materialize that supports OC? (Or an update to the infusion kernel that removes the su installer?) This would help eliminate the issue...
I just Re-rooted my SGS2 and I now have SU and SuperSU ??
Im assuming that SuperSU was installed automatically with the root ROM??
I have puirchased the Pro Version of SU .. so is it safe to Remove SuperSU without messing something up ?
Yes no problem
Just update the binaries of SU.
I tried upgrading from su 2.6.3.1 to superuser 3.0.7 over the weekend and after flashing 3.0.7 , none of my apps that required root work - is there a way around this [im using the latest update (1.63...)] Id like to update but seems stuck with older version for now - at least it works.
I did see a Superuser elite in the market... does the new version require you to pay for the license to get root (not that its about money but im just curious)?
Also yes there us an "update fixer" which requires root privileges which the new 3.0.7 version doesnt provide so i cant use that.
try flashing su in recovery http://androidsu.com/superuser/
yeah thats exactly what i did...
I rooted my phone long ago and just got the new update so had to reroot it after installation... which seemed to work fine (with the older su-2.6.3.1) but sadly now that i got this nonworking superuser 3.0.7 (elf).zip in my phone none of my apps that need root access work
At this point im trying to figure how to go back to the older version (unless i can get this one working). Was just hoping i dont have to start all over as i cant even seem to reflash the older version - as it now gives me errors. Might just have to wipe the phone and start all over with the update.
But yeah so I updated the latest htc update and had to reroot my phone, I was able to flash the su-2.6.3.1 via CMR and this worked fine. It seems as i should have stopped there as i saw that the 2.6.3.1 is an older version, so i tried flashing the latest 3.0.7 (elf) superuser -(which appeared to install just fine) but now I dont seem to have root anymore (although i see the superuser app - none of my apps that require superuser work). Ideas? Using adb .. I do see proper permissions on su at /system/bin but - for some reason SU is not working.
Did you make regular Nandroid backups?
You should have made a Nandroid backup through CWM after installation of Superuser 2.6.3.1. I take it this isn't the case, because that backup would mean you could perform a factory restore, reflash CWM, and restore the backup. Any time you are making changes to your phone, backup before and along the way, just in case something like this happens. Titanium has its uses, but if your phone environment gets borked and you can't use it, it kind of defeats the purpose. Nandroid backups are more reliable in my book, and aren't app-dependent.
Sounds like you will have to start from scratch, although I'm unsure as to why Superuser 3.0.7 didn't work as expected. Possibly there was a conflict in moving from 2.6.3.1 to the newer version. I don't know of any specific problems 3.0.7 has with the MT4GS, and I'm running it on my phone with the latest binary without any problems. I do get an error message for one app, Quick Boot, when I use it to boot into recovery, but that doesn't stop the app from functioning as expected. I think that difficulty is related to the app itself and not Superuser.
Hopefully someone with a little more Superuser experience will chime in here. I'm afraid I don't have any ideas beyond the above.
Good luck --
--
KingCheetah
steve_77 said:
It seems as i should have stopped there as i saw that the 2.6.3.1 is an older version, so i tried flashing the latest 3.0.7 (elf) superuser -(which appeared to install just fine) but now I dont seem to have root anymore (although i see the superuser app - none of my apps that require superuser work). Ideas? Using adb .. I do see proper permissions on su at /system/bin but - for some reason SU is not working.
Click to expand...
Click to collapse
I had a similar problem before with SU after switching ROMs. Don't know if it might help but with Titanium Backup it showed that I had no busybox so I dl'ed busybox then SU wouldn't allow the apps to gain root access. Couldn't figure out what the problem was at all. Then I went to the SU app then saw that under the apps that were allowed or disallowed root access, the SU app itself was there. Once I deleted it from the list all the other apps that needed access worked fine. Hope that helps...
KingCheetah said:
You should have made a Nandroid backup through CWM after installation of Superuser 2.6.3.1.
Click to expand...
Click to collapse
Yeah i know - as fate would have it this is the one time i did not make a backup yet as i was hoping to gut out all the crap apps before doing a backup. Guess ill need to get more religious with the backups.
manimmal
Yeah i had Titanium Backup running with busy box before i had the "bright" idea to upgrade to 3.0.7 - but i guess i could try that but likely i might have to start-over from scratch (and forget about the 3.0.7 version) - unless anyone has any other ideas.
The only thing I can think of is perhaps the first su was flashed using one version of CMR and the second another version of CMR (updated after i installed rom manager perhaps)?
Even more interesting is the "su-2.3.6.1-ef-signed" with su having a datestamp of 8/17/2010; while the "Superuser-3.0.7-efghi-signed2" su version has a datestamp of 2/29/2008 - which seems a bit weird....
steve_77 said:
I tried upgrading from su 2.6.3.1 to superuser 3.0.7 over the weekend and after flashing 3.0.7 , none of my apps that required root work - is there a way around this [im using the latest update (1.63...)] Id like to update but seems stuck with older version for now - at least it works.
I did see a Superuser elite in the market... does the new version require you to pay for the license to get root (not that its about money but im just curious)?
Also yes there us an "update fixer" which requires root privileges which the new 3.0.7 version doesnt provide so i cant use that.
Click to expand...
Click to collapse
I'm running Superuser v3.0.7 with no problem, I flashed it in recovery. It has the su binary 3.0.3.2.
Fuzi0719 said:
I'm running Superuser v3.0.7 with no problem, I flashed it in recovery. It has the su binary 3.0.3.2.
Click to expand...
Click to collapse
do you still have the exact same zip file you used to install 3.0.7 ? (perhaps you have a slightly different one then whats available on the website)
I have no doubt that it works on some peoples devices, but i just dont know why it doesn't work on my device. I am pretty much running stock rom with the latest htc update, CMR 5.0.2.7 , rom manager 5.0.0.6 , superuser 2.3.6.1, su binary 2.3.1-ef - this works ( i have root) but if i boot into recovery and install the latest su for froyo 3.0.7 I loose root. (made nandroid backup this time)
I was thinking of trying to use chainsdd "su update fixer" in the market - but dont know how to use this app.. if it helps in debug i am also having a hard time installing busybox. i use "partitions info lite" to check status of my partitions, root access, and that i have busybox installed... i tried installing it via "busybox" [Stephen (Stericson)], which didnt seem to be recognized so uninstalled and tried "busybox installer" [JRummy16] - they are probably separate issues but who knows...
steve_77 said:
... and install the latest su for froyo 3.0.7 I loose root. ...
Click to expand...
Click to collapse
You answered your own question.
Froyo was the version of Android that predates Gingerbread.
The only official release of software for this device is on Gingerbread.
We are moving forward into Ice Cream Sandwich, but not officially.
You are basically trying to install a Windows 7 Program on Windows 95, to craft an analogy.
Stick with the gingerbread release of superuser.
The reason why the version is higher is because for the Froyo version of Android it went through more iterations.
Shame I didn't see this thread sooner, someone else had this same issue a while ago and I gave the same answer, should be around here somewhere. Would have saved you some trouble.
Some confusion here, I think...
Here's what is at ChainsDD's official site, http://androidsu.com/superuser/
Eclair/Froyo/Gingerbread/Honeycomb/IceCreamSandwich (2.1 – 4.0.3)
md5: fc462fa0630379edbe10006b1d19d9b1
Superuser-3.0.7-efghi-signed.zip | mirror | RM Web Connect
binary only
md5: 26d08a253f1883c13561d173094d70b9
su-bin-3.0.3.2-efghi-signed.zip | mirror | RM Web Connect​
The lines after the md5 codes are links for the zip files. Superuser 3.0.7, according to the dev, is applicable to all flavors of Android as listed. This is also the exact file that I flashed and am using on my phone. There is a separate file for Donut 1.6, and it also is designated 3.0.7, but with a slightly different filename: Superuser-3.0.7-d-signed.zip.
I still think updating from 2.3.6.1 is part of the problem. If you go straight to 3.0.7 after your reformatting, it should work properly.
Also, Manimal's suggestion to check that Superuser isn't disallowed within the app itself is a great idea. It's weird, but an easy fix if this is the case.
I believe the update fixer Chains has available is to correct problems with the Superuser app updating new binaries. I don't think this would be of benefit to your situation.
Chains would be the best source for help, I think; an e-mail couldn't hurt --
--
KingCheetah
2.3.4 is froyo right?
Either way the one i installed (i.e. Superuser-3.0.7-efghi-signed.zip) was from the official site (http://androidsu.com/superuser)
which according to the notes shouldn't matter which version as long as its not 1.6 which it certainly isnt as its 2.3.4
will try it again... but thanks for the reply
So why not install the working version, and then just update the binary from within the app?
That would be one way.
Sent from a digital distance.
steve_77 said:
2.3.4 is froyo right?
Either way the one i installed (i.e. Superuser-3.0.7-efghi-signed.zip) was from the official site (http://androidsu.com/superuser)
which according to the notes shouldn't matter which version as long as its not 1.6 which it certainly isnt as its 2.3.4
will try it again... but thanks for the reply
Click to expand...
Click to collapse
Android 2.3.X is Gingerbread. Froyo is 2.2.X. Anyway, the SU you have SHOULD work, it is the same as I used. Have you tried flashing it via fastboot? I simply flashed the 3.0.7 version via recovery when I installed my ROM (stock 1.63.531.2).
Alright so I was looking to take the ota as the p-rom description states you should have the newer build and I want to start using it and the Xposed framework. Here is what I did to retain root.
-----------------------------------------------------
1) Delete modified SystemUI and replace with original (if applicable)
2) Freeze TricksterMod bc of on boot settings kernel modification (if applicable)
3) Unfreeze ATT OTA files in TiBu
4) Download Voodoo OTA Keeper, backup current root and use temp. unroot
https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper
5) Go into Superuser / SuperSU and uncheck enable Superuser
6) Go to Software update and take ota
- On reboot it said custom for me, but installed OTA without issue
7) Restore root file in Voodoo, check Superuser enabled box in Superuser/SuperSU
8) Download Root Checker and check root access
- You now have the new firmware without having to reroot the device or use Odin
-----------------------------------------------------
Sent from my AT&T Galaxy S4 - Stock 4.2.2 Rooted
this seems like a lot more work than the Motochopper script.
Dallenn said:
this seems like a lot more work than the Motochopper script.
Click to expand...
Click to collapse
I was already rooted using that script and wanted the OTA as I described above. I didn't want to Odin stock to take OTA or use a file explorer to delete busy box and su in system/xbin (unrooting the device) only to then reroot using motochopper. This just seemed easier to me. The first 3 steps are case dependent on what you have done to your device. I had kernel tweaks, modified SystemUI and frozen ota updates, so I had to do those, but most just need to do 4-8
-----------------------------------------------------
Sent from my AT&T Galaxy S4 - Stock 4.2.2 Rooted