(OTA)(update.zip)(2.3.6)Dont know if anyone knows this??? - Verizon Droid Charge

So i went back to stock ee4 praying i'd get the OTA but i read on tge VZW forum on their site that they are doing it in batches so we could still be waiting a few days..so i looked more, went to my rootzwiki app and found a topic under the droid charge forum called "GB OTA manual update" it is a update.zip that you must do with the stock recovery from EE4. So just now on my phone i downloaded it, named it update.zip placed it on root of sdcard, went into stock recovery, chose update.zip, waited a good 15-20 minutes and now im on Gingerbread 2.3.6 heaven with stock kernel, ep4d modems and radios. So far its running good i will do a call later to see if this fixed up the loud speaker noise. Here is the link to the download: http://www.multiupload.com/HAG3RFTBY6
Thanks and props go to SPJETROVIC for the manual update and to HOPPERMI for posting up the link provided here from rootzwiki. Hope you enjoy.
Disclaimer: I am not responsible for what u do or dont do to your phone. Only do this if you know what your doing otherwise wait for the OTA to be puahed to your phone.
Sent from my SCH-I510 using xda premium

Thanks I was just looking around for that, I saw the OTA notice too. Will give it a try now.
Update: Before applying this update, my Charge read:
Hardware Version: I510.06
Model Number: SCH-I510
Firmware Version: 2.2.1
Baseband Verson: I510.06 V.EE4 and SCH-I510.EE1
Kernel Version: 2.6.32.9 and [email protected] #1
Build Number: SCH-I510.EE4
After update:
Hardware Version: I510.06
Model Number: SCH-I510
Firmware Version: 2.3.6
Baseband Verson: I510.06 V.EP4 and SCH-I510.EP4
Kernel Version: 2.6.35.7-EP4
Build Number: SCH-I510.EP4
Will give it a spin and let you know how it goes, THANKS!

Thats what I have now on my phone which is the deodexed debloated version. It seems like the latest leak is the same as that file. Good deal.

Yup... it was posted here:
http://forum.xda-developers.com/showthread.php?t=1364298

So if I want to root my phone now that I have that update so I can use Titanium backup, etc. does anyone have a suggestion how to do that/what to use? Thanks!

How to root the Droid Charge? Follow my instructions...
http://www.toms-world.org/android/#rootInstructions

Thanks trparky. I followed your instructions until I got to step 24 Go to the mounts menu and choose to mount /system. Did not see that selection, only unmount /system so I skipped it. Completed the rest of the instructions, downloaded superuser and titanium backup and it shows rooted.

Good to hear my instructions helped you.
I'm wondering if the SDCard Fix Patch at step 23 already mounted /system for you as part of the installation of it. I'm going to take apart the SDCard Fix Patch and see what the install script does.
---------- Post added at 10:56 AM ---------- Previous post was at 10:55 AM ----------
Yep... just as I suspected. The SDCard Fix Patch mounted /system so you can disregard mounting /system at step 24.
I'll update the instructions and remove the mounting of /system at step 24. Other than that, there will be no other changes to the rooting procedure.
---------- Post added at 11:07 AM ---------- Previous post was at 10:56 AM ----------
On second thought, I changed step 24 to read like this...
Go to the mounts menu and choose to mount /system. If it says "Unmount /system" then /system is already mounted and you can disregard this step.
I try to make my instructions as thorough as possible so as to leave no questions about what to do next.

doing it this way will it wipe my fone?

The update zip will not wipe your phone at least it didn't for me.
But I would recommend doing a wipe always better to start from scratch imo
Sent from my SCH-I510 using xda premium

I'm using EP4D with CWR and Voodoo and for some reason my PC won't recognize my SD card although Odin sees it no problem. I figure taking the actual OTA update is a good idea for me for now, especially to see if it fixes my SD problem. I used Voodoo control to disable lagfix and that went without a hitch.
To now get to dead stock EE4 so I can get the OTA pushed, do I need to ODin with the PIT file or can I just Odin an EE4 package alone?
Thanks for any advice.

I would use charge.pit file with the ee4 all in one package.. make sure you check re-partition in odin while using the pit file. Then after that you will be able to accept the ota if it has come to your device
here is the link to the charge.pit
http://forum.xda-developers.com/showthread.php?t=1111486
here is the link to the ee4 package
http://forum.xda-developers.com/showthread.php?t=1172182

junksecret said:
I'm using EP4D with CWR and Voodoo and for some reason my PC won't recognize my SD card although Odin sees it no problem. I figure taking the actual OTA update is a good idea for me for now, especially to see if it fixes my SD problem. I used Voodoo control to disable lagfix and that went without a hitch.
To now get to dead stock EE4 so I can get the OTA pushed, do I need to ODin with the PIT file or can I just Odin an EE4 package alone?
Thanks for any advice.
Click to expand...
Click to collapse
If you dont feel right doing it imnuts way i found this: http://bit.ly/r3jeQB over in the "Droid Charge General" forums. It is the full 100% stock EE4 odin pulled from VZW itself. Has radios, modems and kernel. All u need to do is:
Go into CWR
Disable lagfix
Pull battery and SIMcard
Open up odin on computer( i use odin 3 ver. 1.30)
Connect phone to computer in download mode
Put battery back in
Drop the file above in PDA(after you unzip it)
Press start to begin odin
Once it restarts put SIMcard back in and your on EE4!
Sent from My Premium Droid Charge

PINCPN said:
Thanks I was just looking around for that, I saw the OTA notice too. Will give it a try now.
Update: Before applying this update, my Charge read:
Hardware Version: I510.06
Model Number: SCH-I510
Firmware Version: 2.2.1
Baseband Verson: I510.06 V.EE4 and SCH-I510.EE1
Kernel Version: 2.6.32.9 and [email protected] #1
Build Number: SCH-I510.EE4
After update:
Hardware Version: I510.06
Model Number: SCH-I510
Firmware Version: 2.3.6
Baseband Verson: I510.06 V.EP4 and SCH-I510.EP4
Kernel Version: 2.6.35.7-EP4
Build Number: SCH-I510.EP4
Will give it a spin and let you know how it goes, THANKS!
Click to expand...
Click to collapse
My info on the phone is exactly the same as yours but there is no OTA . I even manually checked it still nothing. any suggestions? I checked on the test charge there is no OTA either so I am ok. I just have to wait for it.

droidxrooting said:
My info on the phone is exactly the same as yours but there is no OTA . I even manually checked it still nothing. any suggestions? I checked on the test charge there is no OTA either so I am ok. I just have to wait for it.
Click to expand...
Click to collapse
If your phone is the same then your on gingerbread already..EP4D is EP4
Sent from My Premium Droid Charge

I love this site....just applied this update to replace ep4p. Took all of about 40 minutes and I'm up and running without having to sit impatiently for the ota.

Was about to run this zip when i got a message for the new OTA. Installed the OTA. Followed the instructions on this thread and flashed CWM Recovery tar using Oden using the PDA. It passed then rebooted holding down power + home+ positive volume. Releasing power at the Samsung logo while continuing to hold the home+ positive volume.The phone keeps launching into android system recovery instead CWM
Is there something I'm doing wrong here? Any assistance would be helpful.

Sorry if offtopic. Aynyone knows if gtalk with video works on ep4d? tia
Sent from my SHIFTAO5P using XDA App

I would try reflashing CWM. Seems like it didn't take...
Unthinking about it some more, I beliene the stock kernel will overwrite CWM with stock recovery. I'm not 100% on that but fairly sure. However you do need to be able to get into CWM on the first boot after installing it to be able to install a custom kernel, so... try reflashing CWM then a custom kernel most likely (imoseyon's latest would be my recommendation).
Sent from my SCH-I510 using XDA App

post some screens please I would like to see how much poop we're dealing with here with their 'new color scheme'
sent from my Acer Iconia A500 beast of a tablet via XDA app

Related

Please delete

Moderator please delete
I haven't purchased the Charge yet, but I'm planning on pulling the trigger soon. Been reading the forums for a while now. I currently have a rooted OG Droid. Now after using this method, will it keep the root after doing the ED2 update?
HaloR1 said:
I haven't purchased the Charge yet, but I'm planning on pulling the trigger soon. Been reading the forums for a while now. I currently have a rooted OG Droid. Now after using this method, will it keep the root after doing the ED2 update?
Click to expand...
Click to collapse
No... ED2 will kill root. Do not update to ED2 until root is available.
There is an ODIN'd rom available that has root for ED2 but that is it.
Right on. Thanks for the speedy reply.
jt's cwm and imnuts rom are prerooted as well.
davey11 said:
jt's cwm and imnuts rom are prerooted as well.
Click to expand...
Click to collapse
My rom is rooted aswell
DroidXcon said:
My rom is rooted aswell
Click to expand...
Click to collapse
Was mentioned in post 3 is why I didn't say yours was.
About how long does it takes cause its been steaking gingers soul for a while now....thanks
brandonaspencer said:
About how long does it takes cause its been steaking gingers soul for a while now....thanks
Click to expand...
Click to collapse
Mine took about 4 minutes
Sent from my SCH-I510 using XDA Premium App
It says its complete and its rebooting but nothing happens
With this method will it make your phone go crazy advising you there is an update?
DroidXcon said:
My rom is rooted aswell
Click to expand...
Click to collapse
When you say your ROM is rooted, I'm assuming by installing your ROM (following the directions in your thread) it will root the phone and install your ROM all in one shot? Sorry for the noob question.
HaloR1 said:
When you say your ROM is rooted, I'm assuming by installing your ROM (following the directions in your thread) it will root the phone and install your ROM all in one shot? Sorry for the noob question.
Click to expand...
Click to collapse
This method is to root ED1 only. This is not a ROM. If you want a rooted rom see the first 2 or 3 posts in developement.
psalm462 said:
With this method will it make your phone go crazy advising you there is an update?
Click to expand...
Click to collapse
All charges are shipping with ED1 and verizon has pushed an update which is ED2 so your phone will ask you to update every 5 minutes whether you root it or not. If you update to ED2 then this root method will not work. If you root your phone and then update to ED2 it will break your root.
To stop the update pop up from occuring go into your build.prop file and change all references of ED1 to ED2 and it will stop asking you to update
danalo1979 said:
This method is to root ED1 only. This is not a ROM. If you want a rooted rom see the first 2 or 3 posts in developement.
Click to expand...
Click to collapse
Right, I understand that. My question was actually in reference to DroidXcon's ROM. He stated that his ROM is rooted. I guess what I'm asking is, by using ODIN to install his (DroidXcon's) file, it will root the phone and install his ROM as well? I'm coming from a rooted D1.
HaloR1 said:
Right, I understand that. My question was actually in reference to DroidXcon's ROM. He stated that his ROM is rooted. I guess what I'm asking is, by using ODIN to install his (DroidXcon's) file, it will root the phone and install his ROM as well? I'm coming from a rooted D1.
Click to expand...
Click to collapse
It will install his ROM, which is rooted. It will not "root" the phone as such, but you will have a rooted phone with ability to run Titanium Backup, etc., when done.
Samsung Androids (at least the Fascinate and Charge) are different from most others in that you can flash almost anything with ODIN, regardless of the condition of the phone (rooted or not, currently running or not).
luigi1111 said:
It will install his ROM, which is rooted. It will not "root" the phone as such, but you will have a rooted phone with ability to run Titanium Backup, etc., when done.
Samsung Androids (at least the Fascinate and Charge) are different from most others in that you can flash almost anything with ODIN, regardless of the condition of the phone (rooted or not, currently running or not).
Click to expand...
Click to collapse
Excellent. Thanks for clearing that up.
danalo1979 said:
Thanks to DroidXcon and others for creating this one click method. This is by far the easiest method to root your charge on ED1. See attachment
Don't forget to thank me for making rooting easy for you to find and don't forget to thank and donate to DroidXcon for creating it.
The Root method is called GingerSnap and its a One click.
1. Make sure your phone is in debugging mode
2. Make sure you have the charge drivers installed on your PC
3. Download the gingersnap .zip file to your desktop
4. Double click on the gingersnap.exe file and press GO
That's it!!!! Your phone will reboot and you will be fully rooted. (permanent root)
Click to expand...
Click to collapse
A bit of newb to the Droid. Will this work on my Charge? Here are the specs:
Firmware : 2.2.1
Baseband: i510.06 V.ED1
SCH-I510.ED1
Kernel Version: 2.6.32.9
Build Number: SCH-I510.ED2
Just getting confused between the ED1 and ED2... Don't want a $500 paperweight.
Ya Know?
Thanks!
Ry.kaz.ryder said:
A bit of newb to the Droid. Will this work on my Charge? Here are the specs:
Firmware : 2.2.1
Baseband: i510.06 V.ED1
SCH-I510.ED1
Kernel Version: 2.6.32.9
Build Number: SCH-I510.ED2
Just getting confused between the ED1 and ED2... Don't want a $500 paperweight.
Ya Know?
Thanks!
Click to expand...
Click to collapse
yes it will work
here are my specs as well, and it's been stealing the ginger's soul for anout 15 mins now...any suggestions?
Firmware : 2.2.1
Baseband: i510.06 V.ED1
SCH-I510.ED1
Kernel Version: 2.6.32.9
Build Number: SCH-I510.ED2

EE4 Being Pushed to Phone =Safe?

I am running the rollback Odin root to ED1 / edited build.prop .... EE4 system update is sitting here wanting to be installed. Anyone know if it is gonna kill the root I have ??
It will keep root. Make sure you undo lag fix if you installed new kernel.
Sent from my SCH-I510 using Tapatalk
I don't recall mine keeping root. I just flashed CWR (odin), PBJ kernel (cwr), and debloated EE4 (cwr) after anyways. No wipe is necessary.
This way you get the radio update, EE4, back to rooted, and debloated.
Chopstix9 said:
I am running the rollback Odin root to ED1 / edited build.prop .... EE4 system update is sitting here wanting to be installed. Anyone know if it is gonna kill the root I have ??
Click to expand...
Click to collapse
why are you posting the same exact questions twice?
Well sir if you MUST know, I will explain why this is posted as a stand alone question as well as at the bottom of the 'stock rooted ed1 odin' thread in development. I do this just because I am such a nice S.O.B. .... I edited the build.prop last night as was being discussed in THAT thread. When I re-booted a couple of times I was still getting the update notification and I thought it was still the ED2 trying to be pushed to the phone so I posed the question of why the build.prop edit didn't take. I then noticed that it wasn't the ED2 update at all but EE4 was being pushed to the phone. So I went back in and edited the post to refelct the same, since I was unable to delete it. Now, since this was a new question and it was likely that it would get lost at the end of a 13 page week+ old post, I also posted it as its own question in the general forum where it belongs...
FEEL BETTER NOW ??
binglejellsx2 said:
I don't recall mine keeping root. I just flashed CWR (odin), PBJ kernel (cwr), and debloated EE4 (cwr) after anyways. No wipe is necessary.
This way you get the radio update, EE4, back to rooted, and debloated.
Click to expand...
Click to collapse
*sigh* ... LOL ... I tried to accept the EE4 and it came back as can't download now try again later. I go into phone and try to check for updates and it says phone is up to date. I'm thinkin due to the build.prop edit and stuff not matching in phone? Baseband version still says ed1 but build says ed2 in about phone listings. It started the download then kicked out immediately and rebooted when I tried to accept ee4 push.
I was able to ODIN this back to ED1 originally. Recovered from a brick the other night (many thanx to droidXcon !!) But I have never used cwr and am a flashing noob so to speak. I am assuming the directions and all downloads are around here if I research it? I am leery of the cwm/cwr stuff as I've seen so many peeps having issues stuck in boot loops and such.
Any help/advice appreciated.
I went back into build.prop and changed everything back to ED1. Phone now shows baseband and build as ED1 again and EE4 is trying to be pushed to the phone again. Looks like I can take the OTA update now and am assuming I will lose root? I have to learn how to use cwm. I downloaded the imnuts cwm this morning, is it as simple as istalling that via ODIN since it is a tar file? Then it will just be a matter of doing the research to figure out how to install stuff via cwm to have a rooted EE4?
Edit: nope ... still wouldn't take the ee4 update. Go to accept it, phone shuts down, get the download image, yellow progress bar makes it about 20% of the way across and phone reboots.
Chopstix9 said:
I went back into build.prop and changed everything back to ED1. Phone now shows baseband and build as ED1 again and EE4 is trying to be pushed to the phone again. Looks like I can take the OTA update now and am assuming I will lose root? I have to learn how to use cwm. I downloaded the imnuts cwm this morning, is it as simple as istalling that via ODIN since it is a tar file? Then it will just be a matter of doing the research to figure out how to install stuff via cwm to have a rooted EE4?
Edit: nope ... still wouldn't take the ee4 update. Go to accept it, phone shuts down, get the download image, yellow progress bar makes it about 20% of the way across and phone reboots.
Click to expand...
Click to collapse
If you have Voodoo enabled it will do that. Make sure you disable before accepting OTA
hydrored said:
If you have Voodoo enabled it will do that. Make sure you disable before accepting OTA
Click to expand...
Click to collapse
I had never installed the voodoo ... don't know cwm yet ... when all else fails drop 5 yards and punt... i just re-flashed the stock rooted ed1 tar. Verified it had all of the appz back that I nuked with titanium and verified I still had root ... now the ee4 update is installing. Will advise of results asap.
Chopstix9 said:
I had never installed the voodoo ... don't know cwm yet ... when all else fails drop 5 yards and punt... i just re-flashed the stock rooted ed1 tar. Verified it had all of the appz back that I nuked with titanium and verified I still had root ... now the ee4 update is installing. Will advise of results asap.
Click to expand...
Click to collapse
I just upgraded my rooted ed1. The apps I had frozen are still frozen but I lost root.
Okay, I am at what I would consider a stock EE4 build. I did lose root.
So now I need to learn the easiest way to root to an EE4. I have not used cwm yet so I reckon I better learn!! Read the how to once thru. I did try just going into stock samsung recover holding volume/power/home and I did get into that.
So ... I have downloaded the imnuts cwm. Do I install that tar file and it is going to replace the stock recovery?
It now seems as though I am unable to enter stock recovery since I took the ee4? I was able to do this prior to the update. Do I proceed with flashing imnuts cwm and go from there?
Edit: I can get to stock recovery afterall
Also, I see references to some adb pushing in the cwm thread and I am ignorant of adb as well. I need to find a how to thread on all of this !! Is the adb another form of access to the phone that needs to be used in conjunction with cwm?
Edit: I flashed the New_CWM_Recovery.tar.md5 file via ODIN and I got the blue 'reset' in oding and the the green 'pass' ... I go thru the process to enter recovery mode and the menu looks the same with no added options? I have Android system recovery <3e> but now it is blue .... I think I better wait at this point for guidance.
Any Help Appreciated I need ee4 root !!
elucid said:
It will keep root. Make sure you undo lag fix if you installed new kernel.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
So I did Odin to ED1 and rooted. Accepted the OTA for ED2 and kept root. Now like the previous poster, I have the EE4 downloaded and ready to install. If I install it, do I keep root?
Someone said no cuz of modem changes. I didn't flash anything else except the ED1.
Thanks!
Sent from my SCH-I510
not sure if still works as i havent tried it yet, but here http://www.androidpolice.com/2011/04/30/instructions-how-to-root-the-verizon-samsung-droid-charge/ typically with adb its permanent.

Is this possible to fix?

Back on September 14th I downloaded that 14 Mb update. Since then I've flashed many times between stock, special ROMs, and of course the Gingerbread leaks. Well, my current issue is that I'm stuck on UCKE3 which is the newest I could find (the one from early June.) So far I have had no luck re-updating my phone to UCKH1 from the 14th. I'm getting the constant, "Your phone is up to date. You may check back in 24 hr and 24 min" message. This is very frusterating to me since when I'm on stock I like to have to latest official updates. Anyone have any idea what's causing this? I've asked a similar question in the Q&A thread, but some kid gave me nothing but a link to GTG's modem collection which is not what I really needed and threw a whole you better thank me for helping you thing in my face, so I prefer to check in here.
I assume you're referring to gtg's "Return to stock" UCKE3? If you actually want to be stock, that's the one to go with. That OTA Update really doesn't gain you much value, except for possibly the KI3 modem (which of course you know you can install yourself, no thanks necessary )
Now for your actual question: I don't have a definitive answer for you, but a good guess that "Return to stock" may not be 100% stock. Obviously it's rooted, but there may be something else (don't know what) that might be just different enough that AT&T's firmware update utility no longer recognizes your ROM as a candidate for updates.
Sorry that's not a very solid answer, but if I were you I wouldn't sweat this particular update anyway.
I had the same problem. What I did was return to stock using gtg's unbrick then after the phone booted I did a factory reset from the settings menu. I was able to get the update installed after that. Just back up your SD cards if you try this.
Sent from my SAMSUNG-SGH-I997 using XDA App
UCKH1 updated the bootloader and modem. I'll find you the link so you can Odin it. it's the completely stock version.
http://hotfile.com/dl/129136963/92a8405/SGH-I997_I997UCKH1_ATT.rar.html
The password for the .RAR is samfirmware.com
Flashed the UCKI3 modem and now I'm back to FROYO.UCKH1! Don't know why I didn't do that in the first place... Oh well. That's what happens when you get 2 hours of sleep then wake up at 7 to PT, haha. I will be thanking your post, good sir.
Bandit_Kaine said:
UCKH1 updated the bootloader and modem. I'll find you the link so you can Odin it. it's the completely stock version.
http://hotfile.com/dl/129136963/92a8405/SGH-I997_I997UCKH1_ATT.rar.html
The password for the .RAR is samfirmware.com
Click to expand...
Click to collapse
This will come in handy for if I need it again, and honestly, I might as well just flash this to be completely safe. You will also be receiving a thanks.
Bandit_Kaine said:
UCKH1 updated the bootloader and modem. I'll find you the link so you can Odin it. it's the completely stock version.
http://hotfile.com/dl/129136963/92a8405/SGH-I997_I997UCKH1_ATT.rar.html
The password for the .RAR is samfirmware.com
Click to expand...
Click to collapse
Thank you for the link. I downloaded it and tried to Odin it... Odin recognised my phone "showing yellow in the top left bar), but the step stayed a "<1> connection setup" for a little under 10mins without doing anything more...
Any ideas what I'm doing wrong?
My phone is rooted and I'm on UCKE3.
Thank you
Unplug then plug it back in,if that doesn't start it, reboot and put it back in download mode. Rerun Odin.
Sent from my SAMSUNG-SGH-I997 using xda premium

[HOW TO] get your AT&T phone onto ICS Leak #1 - Process Updated 11/11/2012

Ok everyone the leak is here!
I have tested it all day and it works very well, very smooth.
Don't post here if you are having issues with this leak itself. If you have issues with the process then by all means post in here with the issue.
So this is a how to with all the files needed being posted in here as well.
1) FXZ back to full 100% stock 2.3.6, ONLY if you were ON GB to begin with!!! If you started on the ICS OTA, then do not attempt this, you will Brick!!!
2) Download the file below called Blur_Version.55.13.25.MB865.ATT.en.US.zip and copy it to the root of your SDcard (it does not matter how it gets there)
3) Boot into stock recovery (power off, then while the phone is off hold both the Vol up and Vol down button, right in the middle, then hold the power button until you see the boot menu, then highlight recovery with the Vol down button, and select with the Vol up button).
4) Get to the recovery menu (you should see an android with an exclamation point, at this point) by holding the Vol up and Vol down button, then the menu will pop up, select install from /sdcard, then select the Blur file from the root of your sdcard, and tell it to flash it. You will flash a new recovery and see a droid laying down with it's belly open and red exclamation point, this is normal, just hit both Vol up and Vol down again to get the menu and select to flash from sdcard again and choose the same Blur file as before.
5) Boot into ICS, and root using the zip below, you will connect the phone to your computer and use the root.bat (unzip this folder to your desktop) for windows and root.sh for linux/mac.
Files:
ICS OTA:
http://www.androidfilehost.com/main...man/Blur_Version.55.13.25.MB865.ATT.en.US.zip
MD5sum: 5bd615584406ba726ad7d49a225dd6f1
ICS root:
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/jimbridgman/A2_ICS_root.zip
MD5sum: 7cd5a0896a8be580b5a379dff408d0ad
Fxz back to 2.3.5 from ICS, ONLY USE THIS METOD:
http://forum.xda-developers.com/showthread.php?t=1805975
Please do not post anything in this thread but install issues. DO NOT ASK IF YOU SHOULD UN-ROOT OR IF YOU CAN STAY ROOTED, OR IF YOU DID THE FXZ YESTERDAY ARE YOU OK. Follow the instructions above, or don't if you don't you will NOT get support.
Note: I am not responsible if you bootloop. brick or wreck your phone, or if your girl leaves you cause you play with your phone too much because of this. You are doing this of your own free will!
You will most likely not be able to get the "real" OTA while on this leak, and since the BL is going to be the same, you may not be able to install the "real" OTA at all, so when it comes out you will need to give the devs time to make it work for anyone who installed this. Again no complaints about this either, your dev team will find a way to make it work. You just need to give us the time needed when it comes out if there are any issues.
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
WOO! Awesome!
farshad525hou said:
Anyone have a link to the 2.3.5 fkz? All the links I've checked are down!
Click to expand...
Click to collapse
Here try this one:
http://sbf.droid-developers.org/edison/list.php
THANKS! Also should the OTA be bigger than 29mb? NEVER MIND
After install this ICS leak, can we come back to 2.3.6 using Atrix2Bootstrap?
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
farshad525hou said:
Quick question.. If I fkz from 2.3.6 wont we get the "invalid CG version error"? There's a thread to fix that but it says it takes stock recovery away (which is needed to flash the OTA). How do i downgrade?
Click to expand...
Click to collapse
I FXZ'd from 2.3.6 to 2.3.5 so I don't know about such a problem.
Sent from my MB865 using xda app-developers app
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
sjc807 said:
@farshad525hou
This is what I used: http://forum.xda-developers.com/showpost.php?p=20389449&postcount=1
Towards the bottom of the post there is an addition step to those who are already on 2.3.6. Just copy the files over to the fkz file, then it should work.
Click to expand...
Click to collapse
THANK YOU!!!! Lo lI would thank you but, i've already hit my 8 thanks daily limit....
How do we get it on our phone if we are running stock 2.3.6? (Unrooted)
Sent from my MB865 using xda premium
question
Done:
Thank you so much Jim. You are the best.
Now if only I could get my Nexus 7 on Thursday , on my day off, I would have everything
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
PhoenixNghi said:
Help me!
My MD5 is matched with 5bd615584406ba726ad7d49a225dd6f1
Click to expand...
Click to collapse
You are not 100% stock.... follow my directions, or it will not work... and don't install bootstrap, that is why your logwrap failed verification.
Sent from my SAMSUNG-SGH-I747 using xda premium
I can't wait till I get my phone back! ICS, FTW!!!!
283ish MB
Sent from my MB865 using xda app-developers app
Oooohhh....yeahhh baby,that's what I am talking about,got it :good::good: I wiped it and I did not come across any issues at all.
Thanks so much.
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
DX2Trip said:
Wow...feel like a complete noob. I've used RSD Lite for my X2 plenty of times with SBF files. Don't know how to use this FXZ file though. Read other threads as well and dont know what to do with this 2.3.5 FXZ file? Been rooted on 2.3.6 for a month or so...still new to this device.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/showthread.php?t=1396650
There is a section on the fxz in the above noob thread, also look just a little lower there is also a patch zip file to apply to the fxz.
Sent from my SAMSUNG-SGH-I747 using xda premium
Dx, you can find very good instructions on how to flash the fxz in this thread: http://forum.xda-developers.com/showthread.php?t=1396650
Sent from my MB865 using xda premium

Sgh-t769 ics

I have an SGH-T769 with android 2.3.6, Baseband T769UVLF4, KERNEL 2.6.35.11, BUILD NUMBER Ginderbread.UVLB7. I am trying to update via kies to ICS 4.0 and it says my device isnt supported, I have updated my baseband to UVLF4 so I dont know what im doing wrong and I dont know how to update the build number to UVLF4. I just did the suggested fix via Jparnell8839, maybe I did it wrong?
1. Questions, no matter how 'dev-section related' they are... go here.
2. I suggest you Odin to stock ICS by downloading the ICS firmware (Uhl something with a 5) from SamMobile.com (I think its down. I can provide a download link later)
3. How to do it?
4. Get your firmware. Download Odin 1.85. Put phone in download mode. Click on PDA, select stock ICS firmware. Uncheck repartition. Hit start.
5. Wait.
6. You SHOULD be on stock ICS now if you followed correctly.
7. Use this if Kies is not working.. otherwise.. try to use Kies.
8. Hit thanks.?
Fixed, and Sorry!
Thank you, I have fixed it. The baseband was UVLF4 but phone version was UVLB7 so I updated the baseband via clockwork mod with T769UVLF4 Baseband_Update, I then flashed from within clockworkmod recovery this rom: SGH-T769_UVLF4_Rooted_Deodexed_ROM. I then did wipe dalvik, wipe data, etc and rebooted. I started kies and BAM! Kies says firmware version available. I am sorry for posting this in wrong section. Thank you for the help. I now have gone from gingerbread to ICS to gingerbread back to ICS.
Just remember to post in the right section next time.. it ticks off the devs.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
thanks
unicorndust98 said:
Just remember to post in the right section next time.. it ticks off the devs.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Click to expand...
Click to collapse
sure thing unicorndust
bulldog42608 said:
I have an SGH-T769 with android 2.3.6, Baseband T769UVLF4, KERNEL 2.6.35.11, BUILD NUMBER Ginderbread.UVLB7. I am trying to update via kies to ICS 4.0 and it says my device isnt supported, I have updated my baseband to UVLF4 so I dont know what im doing wrong and I dont know how to update the build number to UVLF4. I just did the suggested fix via Jparnell8839, maybe I did it wrong?
Click to expand...
Click to collapse
I do have same problem. Now, the Baseband T769UVLH5 and the BUILD NUMBER is Ginderbread.UVLB7. you said u solved it. Can you please explain how i can fix mine step by step?
Thanks in advance,
Thread closed, it has run it's course.

Categories

Resources