Related
guys pls help! When i reboot my phone, once it reboots it shoes me my homescreen and after media scanning and everything it reboots again and that goes on happening unless i keep my phone out of reach for 15-20 mins. Pls help me!
Android Crazy said:
guys pls help! When i reboot my phone, once it reboots it shoes me my homescreen and after media scanning and everything it reboots again and that goes on happening unless i keep my phone out of reach for 15-20 mins. Pls help me!
Click to expand...
Click to collapse
Which firmware are you using and the procedure u used to flash it
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
sirilpta said:
Which firmware are you using and the procedure u used to flash it
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Click to expand...
Click to collapse
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Android Crazy said:
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Click to expand...
Click to collapse
Do a factory reset....
Sent from my GT-I9003 using xda premium
Just flash with another firmware. Try xxkpe..
Galaxy SL
CF Root
XXKPH
Cranium Rom V.3.1
Android Crazy said:
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Click to expand...
Click to collapse
Did u came from xxkpe to xxkpq..?
got new galaxy i9003 on replacement.....
ddkp2/ext4/cwm 5
Android Crazy said:
I have 2.3.6 XXKPQ firmware. I use odin to flash and i use amit.bagaria's CF-Root.
Click to expand...
Click to collapse
1. first flash with only pit file re-partition checked
2. then press reset button and select four files pda,modem,csc,bootloader and flash it.
3. again enter into download mode
4. again flash with 4 files re-partition unchecked.
5. then flash with ddkp2 re-partition unchecked.
I facing this problem before. Try go xxkpe then go xxkpq. There are some stock rom already being released under i9003 android development tread. Go ahead flash with the right file to avoid any circumtances. Your problematic is our priolity. Thanks me if u like it. Cheers
Sent from my GT-I9003 using xda premium
Fixed via factory reset! Thanx a lot!
Where does nitrality save the efs backup? I cant see it in /sdcard/clockworkmod/backup as it was mentioned in some earlier post. [this is SOLVED now ]
Now ANOTHER DOUBT is there. I was on zsle5 and ardatdat 1.7b2 . Then I wanted to unroot my phone and so I flashed the stock kernel given in neo rom thread. And then in about phone, it started showing [email protected] in kernel version, while initially it was something like [email protected] also I realised root was still there. So I flashed zsle5 via odin. Now su is gone but kernel is still that se.infra . How do I get back that [email protected] kernel??
Sent from my GT-I9103 using XDA
Better u use this tool, its best way to backup efs
http://forum.xda-developers.com/showthread.php?t=1308546
Sent from my GT-I9103 using Tapatalk 2
Thanx dude. It worked.
Clear 1 more thing for me plz. I was on zsle5 and ardatdat 1.7b2 . Then I wanted to unroot my phone and so I flashed the stock kernel given in neo rom thread. And then in about phone, it started showing [email protected] in kernel version, while initially it was something like [email protected] also I realised root was still there. So I flashed zsle5 via odin. Now su is gone but kernel is still that se.infra . How do I get back that [email protected] kernel??
Sent from my GT-I9103 using XDA
Dont worry about it, if u want dell created kernel flash xwki5 or xwla4 it have kernels created by dell.
The name shown in about phone refers to its dev. Dell means its made by dell.
Sent from my GT-I9103 using Tapatalk 2
I have a rooted ardatdat v02 kernel. When I flash the v1.8.1 kernel through cwm recovery by installing .zip from sd card, it gets successfully installed .zip message and then i reboot the device it gets stuck at the Samsung logo. What to do?
Also when i tried to flash zsle6 TGY ROM using odin it failed and gave a binary signature error
Sent from my GT-I9103 using xda premium
Dont worry.. When u install the zip package and boot the phone.. It takes time approx 2 to 3 mins.. But it starts.. Thats normal..
I'm facing a weird problem. I can't flash stock rom via Odin. The phone is always stuck on the Samsung screen. Tried xxlq7/xxlq9. I'm on angeeks rom. Wanted to try the blueberry sensation rom.
So for that I tried flashing xxlq9 again as recommended and faced this issue.
EDIT [FIX]
As suggested by Kartik pat i was able to successfully flash stock rom over angeeks rom
I followed the following steps:
1. Take tb for all apps [angeeks rom]
2. Restore any gingerbread backup you might have from CWM. Boot your device.
3. Flash xxlq9 via Odinv3. Boot device
4. Flash cwm4. Boot device.
5. Flash ardatdat kernel v4.0 [ensures the erase bug issue is resolved]
6. Boot System
7. Reboot into recovery. Wipe data,cache,dalvik cache.
8. Boot system and tada
If you want to flash bb rom over this then:
1. Flash the bb rom v1. Reboot.
2. Flash the bug fix zip. Reboot.
3. Flash sensation mod
P.s. this method worked for me using the gb backup and cwmv4.
Hope this helps.
EDIT 2:
As posted by vikesh....
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Sent from my GT-I9103 using xda app-developers app
Try to restore ur cwm backup of gb if u have and den flash ics
I did the same thing i was also using angeek's rom and now i m using BB
Can I restore my cwm backup over xxlq9?
Sent from my GT-I9103 using xda app-developers app
pulley06 said:
Can I restore my cwm backup over xxlq9?
Click to expand...
Click to collapse
yes you can and which ODIN version you are using for flashing better to flash using v3......
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
mj.vikram said:
yes you can and which ODIN version you are using for flashing better to flash using v3......
Click to expand...
Click to collapse
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Sent from my GT-I9103 using xda app-developers app
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Click to expand...
Click to collapse
i am also not sure buddy i also faced this kind of issue once then i restored to GB and flashed it again, but i flashed Mazel on Leaked ICS so i thought it was the problem ......
pulley06 said:
Yeah I was using v3
Okay so I wanted to use the bb rom...are these steps enough?
1. Take tb for all apps
2. Restore backup
3. Flash xxlq9 via Odin
4. Flash cwm
5. Flash ardatdat kernel
6. Wipe data
7. Wipe cache
8. Flash bb v1,fixes, sensation mod.
Click to expand...
Click to collapse
yes buddy you are correct, you need to wipe all 3 ie data, cache & Dalvic cache..
But i feel its not mandatory to flash XXLQ9 because i use to flash on my Leaked ICS and it was working fine when i used it.....
i followed all the steps mentioned above...the phone booted to the home screen of xxlq9...flashed bb rom successfully as per cwm...but the phone is stuck on the samsung screen that comes after galaxy r appears
vipul12389mehta said:
Mj i had similar issue...i want to taste mazel n was flashin ics stock rom..using odin 3.x but it stuck in mid way durin flashin...
Wat cld b d reason ?? Later i restored my cwm backup..
Sent from my GT-I9103 using Tapatalk 2
Click to expand...
Click to collapse
It gets stuck for like 10-15 secs but later it flashes ROM properly,
@mj whats wrong to do it with V1.85?
@pulley I also faced same problem yesterday, but I think that time i did not mount/unmout system so I reflashed BB again by pressing two times mount>unmount (final would be unmount/system), so just press two times, still not booting then again wipe all 3 (cache,dalvik and data)
I think there is few points we should consider while flashing BB or MAZEL2 rom if u are on ANGEEK ROM.
If anybody who sucessfully flashed Stock rom & then BB or Mazel 2 after Angeek, must come in front and give us the solution.
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
@pulley: buddy, as u r the OP, pls add the procesure in ur OP(after getting the solution) and give ur thread name as "Flashing stock rom after Angeek rom". Coz lots of people are flashing over angeek and facing lots of problem.
Asap answer will b appriciated.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Done :good:
pulley06 said:
Done :good:
Click to expand...
Click to collapse
Great buddy. I will add this in Angeek ROM'S OP.
Sent from my GT-I9103 using xda premium
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Optional Method
on request of pulley06 posting this
I was facing same problem from yesterday, so i followed this
1. remove battery/SDcard/SIM
2. wait for 5 minutes
3. insert SIM and SD card and plug USB cable in phone and connect it with laptop/PC (DO NOT INSERT BATTERY)
4. wait for one minute and now insert battery (With USB cable connected)
5. switch on
6. flash stock ICS and reboot
5 flash CWM (I used 5.5 for BB ROM) and reboot
7 enter CWM
8 Mount/Unmount> click on Unmount/system again click same (so click two times)
9 now flash BB ROM and Reboot
10. Enter CWM and repeat step 8 and flash Sensation Theme. and reboot.
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I hope the above post helps you :thumbup:
Sent from my GT-I9103 using xda app-developers app
vishu1991 said:
I don't have a gb backup den what should I do???
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
try flashing Stock GB through Odin.
i created back up of both nordic and austian rom (also gb)
with ardadat kernel
just restore
wipe data/ cache
and flash roms
i have no issue,
Nordic rom flashing over angeek mod rom
Hey Buddies,
I did few R&D over Angeek ROM. As we are facing problem after Flashing NORDIC ROM over this One.
Here is the procedure:
If you Have any Back of ICS / GB then only apply these changes. Coz I have already did this.
Caution: Please take your Backup before then Try to Do below mentioned steps.
1) Requirements:
1.1) Must b having Ardatdat's eMMC erased Kernel i.e. V4.0 & higher.
1.2) ODIN V 3.07
1.3) Latest Kies Installed (for USB drivers)
1.4) Latest XXQL9 NORDIC ROM
1.5) CMW 6.0.1.1 for CMW flashing & CMW 6.0.1.1.tar for ODIN.
1.6) A PC..(of course):silly:
2) Flashing:
As per Suggestion by chandanbs, NORDIC ROM is almost come with Full in System Rom Partition.
So, here is few suggestion which was already suggested by our Great Mj.vikram buddy over this Thread & see Post no #8 there.
Hope, your ROM Partition is 619/620MB.
After Flashing above procedure, If you have flashed Ardatdat's Kernel first & have installed any ROM Specially ANGEEK ROM(coz having problem in that rom particularly as per users) Then Follow the Process:
2.1) Go to CMW Recovery MOD & Install Latest CMW 6.0.1.1
2.2) Wipe Data/Factory Reset.
2.3) Go to CMW recovery again & Just Restore you previous backup of any ROM.
2.4) Open ODIN 3.07(Right Click over Exe & select "Run As Administrator") & Follow the steps for flashing Stock ROM using this tutorial
2.5) After Booting just Flash CMW V6 using ODIN 3.07.
2.6) Don't Wipe Data / Factory Reset or Wipe cache / dalvik Cache. Just let it boot.
Now you have Successfully Flashed Nordic ROM over Angeek / Any other ROM.
Requesting OP to add this one also in his OP Post.
Vikesh.. looks good.. please add few steps as to how to make this nordic room rooted.. as you cant directly flash ardatdat kernel over it as it already full in system rom partition.. :silly:
This means if I don't have an earlier backup of ics/gb and i am on angeeks rom I can't flash any new rom...plz clarify....
Sent from my GT-I9103 using xda premium
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
CrabNN said:
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
Click to expand...
Click to collapse
Usually bootloop can be solved by restoring backup or restart from the beginning. Well, I'm no Dev so I don't know what it meant.
Sent from my GT-I9003 using xda app-developers app
CrabNN said:
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
Click to expand...
Click to collapse
did u already tried to flash xxkpe?try and update to 2.3.6 if u sucesfuly flash kpe.
Sent from my GT-I9003 using xda app-developers app
Try to wipe all data again, it always helps me. And if it doesn't work, flash xxkph with pit, let the phone start and then again go into download mode and flash lf2.
Sent from my GT-I9003 using xda premium
CrabNN said:
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
Click to expand...
Click to collapse
flash latona.pit in odin separately..then flash all four files of XXKPE. then u can install DDLF2 or value pack 2.3.6 of ur region....flashing latona.pit will reset ur partition,so may be this will solve ur issue...try flashing in odin v1.83
I had rooted galaxy fit with 2.3.6. Today i did factory reset on my phone including wiping memory card(as i had increased my internal memory using external sd). Since wiping and reset my phone is continuoudly rebooting. I also tried restore option but nothing happened. I do not know much about it. Please help.
Sent from my Micromax A116 using xda app-developers app
Did u use cwm recovery to format the samsung stock rom??:what: If yes... then it's O.K. No need to worry. Just flash any custom rom (cyanogenmod 7 recommended for flashing the very 1st time over samsung stock rom).
Note: Do format /system b4 flashing.:thumbup:
I do not have much idea about this. Would u please explain the procedure.
Sent from my Micromax A116 using xda app-developers app
Enter recovery mode by pressing & holding Home+Power buttons together when the phone is switched off.
Since ur phone isn't turning on & u mentioed that restore option is not working...I guessed that u might have cwm recovery...coz restore option belongs to cwm recovery... CWM recovery is used for custom roms...while the Android OS installed on the phone at the time of purchase has it own different recovery (known as stock recovery). Stock recovery has much less options than cwm recovery.
BTW how did u format ur phone...?? from settings or via recovery??:sly:
I did factory reset from setting. After that it restarted and opened the boot menu from wher i selected the wipe option
Sent from my Micromax A116 using xda app-developers app
During formatting via settings, the phone automatically reboots after succesful format. & boots directly to home screen (not ny boot menu).
Now can i get my phonr back in initial stage by flashing any rom or i will have to go to service centre.
Sent from my Micromax A116 using xda app-developers app
sunil birda said:
Now can i get my phonr back in initial stage by flashing any rom or i will have to go to service centre.
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
You can get your phone back to initial stage by flashing a stock rom from http://www.sammobile.com/. There you will find a stock rom for your phone.
& follow the steps correctly bro...!!
For 4 pkg f/w(e.g. froyo):-
OPS: BENI_v1.0.ops
BOOT: APBOOT....
PHONE: MODEM....
PDA: CODE....
CSC: CSC....
For one pkg f/w(e.g. gingerbread):-
OPS: BENI_v1.0.ops
One Package: gingerbread.home.tar.md5
Hope this helps...!!!
thanks
thanks to galaxy_rohit and junnix for help.
sunil birda said:
thanks to galaxy_rohit and junnix for help.
Click to expand...
Click to collapse
Welcome bro...