I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
CrabNN said:
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
Click to expand...
Click to collapse
Usually bootloop can be solved by restoring backup or restart from the beginning. Well, I'm no Dev so I don't know what it meant.
Sent from my GT-I9003 using xda app-developers app
CrabNN said:
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
Click to expand...
Click to collapse
did u already tried to flash xxkpe?try and update to 2.3.6 if u sucesfuly flash kpe.
Sent from my GT-I9003 using xda app-developers app
Try to wipe all data again, it always helps me. And if it doesn't work, flash xxkph with pit, let the phone start and then again go into download mode and flash lf2.
Sent from my GT-I9003 using xda premium
CrabNN said:
I was flashing the official ROM 2.3.5 Gingerbread using odin 3.07 for my Galaxy SL i9003 but ended up in boot loop.
Before the boot loop starts, it shows that it can't access to ' /system/csc/SER/system/ ' as in the picture.
How do I solve this?
Click to expand...
Click to collapse
flash latona.pit in odin separately..then flash all four files of XXKPE. then u can install DDLF2 or value pack 2.3.6 of ur region....flashing latona.pit will reset ur partition,so may be this will solve ur issue...try flashing in odin v1.83
Related
I flashed xxkpq today morning but after installing it shows some multi csc problem. So right now my phone does not boot and gets stuck at samsung logo. It can still go to download mode but i dont know why but i cannot flash and rom. I have a nandroid backup and so i wanted to know that if i could flash clockworkmod through odin and then boot into it through some key combination! PLEASE HELP I AM IN GRAVE TROUBLE.
Lostboy2909 said:
I flashed xxkpq today morning but after installing it shows some multi csc problem. So right now my phone does not boot and gets stuck at samsung logo. It can still go to download mode but i dont know why but i cannot flash and rom. I have a nandroid backup and so i wanted to know that if i could flash clockworkmod through odin and then boot into it through some key combination! PLEASE HELP I AM IN GRAVE TROUBLE.
Click to expand...
Click to collapse
Extract the CF-Root zip to get the zImage .... then convert it to tar using
Code:
$ tar -H ustar -c zImage > CFroot.tar
from Linux or Cygwin...
Flash using Odin...
Flash KPE first then KPQ.
Flash Kpe then flash kpq..Root your phone with Cf-root then go to cwm and restore your backup
Sent from my GT-I9003 using XDA
I am a newbie....y should kpe be installed first and than xxkpq????
yes of cours
download xxkpe .. the 4 files..
flash them with odin..
then flash xxkpq with odin it will work
hit thanks if i helped you
amogh katre said:
I am a newbie....y should kpe be installed first and than xxkpq????
Click to expand...
Click to collapse
Go through this: http://forum.xda-developers.com/showthread.php?t=1133787
You will get your answers.
My phone galaxy sl gt-i9003 was running was rooted and running on codename(android) when I flash some random kernel and bricked it. I then read though lots of xda-developers threads and followed whatever was said there. It goes into recovery and download mode. So i flashed the stock ROM( which i had downloaded from sammobile ). But after that it got stuck in boot loop. Then I tried flashing a few ROM suggestions given here in xda. But each time I either got back a bricked phone or boot loop problem. Help Please!!!:crying:
balaji.nataraj said:
My phone galaxy sl gt-i9003 was running was rooted and running on codename(android) when I flash some random kernel and bricked it. I then read though lots of xda-developers threads and followed whatever was said there. It goes into recovery and download mode. So i flashed the stock ROM( which i had downloaded from sammobile ). But after that it got stuck in boot loop. Then I tried flashing a few ROM suggestions given here in xda. But each time I either got back a bricked phone or boot loop problem. Help Please!!!:crying:
Click to expand...
Click to collapse
Hard brick or softbrick
install that firmware downloaded from samfirmware.com if they could all downloads mode or go into recovery mode then wipe data / factory reset
Or try install cwm recovery via odin
╔═╦═╦═╦═╦╗╔╗
║╚╣║║╚╣╚╣╚╝║
╠╗║║║║║║╠╗╔╝
╚═╩═╩╩╩╩╝╚╝
Bad english
Sent from my phone using xda app-developers app
since u have screwed your along the way to get boot. you better to flash xxkpe or xxkpq with pit
and repartition is amust cause you are on ext4
Sent from my Galaxy Nexus using Tapatalk 2
hmmp, i somehow recover on that situation by re partitioning through odin using pit from I9003DXKB2 stock rom froyo...
then flash a I9003DXKP9 gingerbread through odin also
I9003DXKB2 is my SL's original firmware since i bough it though
but might help you...
i did all those because i want my SL to run CM10 Alpha 4 jelly bean
i downloaded the stock roms from "[ROM] STOCK ROMS for GALAXY SL I9003" thread in the developers section...
yes its better to flash with xxkpe and then with xxkpq... me too experience the same problem...
follow this: http://forum.xda-developers.com/showthread.php?t=1133787
download firmware from here: http://forum.xda-developers.com/showthread.php?t=1004647
Thank you all for replying. I solved the problem. I had forgotten to factory reset after flashing stock rom. Now its as good as new. Also I had this doubt. Is it required that you factory reset after every flash?
Sent from my GT-I9003 using xda app-developers app
unbrick your phone
balaji.nataraj said:
My phone galaxy sl gt-i9003 was running was rooted and running on codename(android) when I flash some random kernel and bricked it. I then read though lots of xda-developers threads and followed whatever was said there. It goes into recovery and download mode. So i flashed the stock ROM( which i had downloaded from sammobile ). But after that it got stuck in boot loop. Then I tried flashing a few ROM suggestions given here in xda. But each time I either got back a bricked phone or boot loop problem. Help Please!!!:crying:
Click to expand...
Click to collapse
just download heimdall oneclick.jar and run it on windows,in phone go to download mode ,in pc click on oneclick.jar and run it then click on unbrick me and unbrick your phone its easy
APU KALITA said:
just download heimdall oneclick.jar and run it on windows,in phone go to download mode ,in pc click on oneclick.jar and run it then click on unbrick me and unbrick your phone its easy
Click to expand...
Click to collapse
HEIMDALL ONE-CLICK.....haven't heard this before?...
hye. can somebody help me. my tab plus having problem after upgrading using kies. it stuck for over an hour and i unplugged usb from the tab. when i turn it on, it appear "firmware upgrade encountered an issue. please select recovery ode in kies & try again" . but when i plug my tab, the kies seem like doesnt recognize the tab. it doesnt connect with my tab. is my tab brick?what can i do to make it function again?please help me.:crying:
Im not really an expert but i'll try..
Can you enter odin mode? If yes, then you can flash your stock HC rom.. but guessing from your problem.. do you know how to use odin? If dont, try to do some research.. so heres my tip..
1. Find your stock HC firmware at www.samfirmware.com
2. Flash the firmware via odin..
3. (From experience) it will boot loop in the samsung animation
4. Dont worry.. enter recovery and do both wipes
5. Your boot will now proceed..
BEFORE I FORGET.. WIPING IS SAFE ON STOCK HC ROM.. DO NOT WIPE FROM STOCK ICS ROM.. I REPEAT DO NOT WIPE FROM STOCK ICS ROM
PEOPLE OUT THERE.. PLEASE CORRECT ME IF IM WRONG..
IM JUST HELPING OUR FRIEND HERE..
Sent from my GT-P6200 using XDA Premium HD app
I have the same issue when i flash my tab with the latest firmware..but then i flash latest cwm odin version..go to cwm recovery..and did factory reset..bravo!!! My tab is alive
Sent from my GT-P6200 using xda premium
theejay0625 said:
Im not really an expert but i'll try..
Can you enter odin mode? If yes, then you can flash your stock HC rom.. but guessing from your problem.. do you know how to use odin? If dont, try to do some research.. so heres my tip..
1. Find your stock HC firmware at www.samfirmware.com
2. Flash the firmware via odin..
3. (From experience) it will boot loop in the samsung animation
4. Dont worry.. enter recovery and do both wipes
5. Your boot will now proceed..
BEFORE I FORGET.. WIPING IS SAFE ON STOCK HC ROM.. DO NOT WIPE FROM STOCK ICS ROM.. I REPEAT DO NOT WIPE FROM STOCK ICS ROM
PEOPLE OUT THERE.. PLEASE CORRECT ME IF IM WRONG..
IM JUST HELPING OUR FRIEND HERE..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
thanks!!i will try this. and i just realize that i posted this in development section. sorry.
arfian said:
I have the same issue when i flash my tab with the latest firmware..but then i flash latest cwm odin version..go to cwm recovery..and did factory reset..bravo!!! My tab is alive
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
i'm downloading the latest firmware right now and try this method after the download is done. i hope my tab will be just like yours. ALIVE!!
edit : its not working. failed flashing with odin. i dunno what happen. is there any other solution. my tab is not rooted and for sure usb debugging also off. maybe flashing with odin failed because usb debugging is off right.
mijul mojas said:
thanks!!i will try this. and i just realize that i posted this in development section. sorry.
Click to expand...
Click to collapse
theejay0625 said:
Im not really an expert but i'll try..
Can you enter odin mode? If yes, then you can flash your stock HC rom.. but guessing from your problem.. do you know how to use odin? If dont, try to do some research.. so heres my tip..
1. Find your stock HC firmware at www.samfirmware.com
2. Flash the firmware via odin..
3. (From experience) it will boot loop in the samsung animation
4. Dont worry.. enter recovery and do both wipes
5. Your boot will now proceed..
BEFORE I FORGET.. WIPING IS SAFE ON STOCK HC ROM.. DO NOT WIPE FROM STOCK ICS ROM.. I REPEAT DO NOT WIPE FROM STOCK ICS ROM
PEOPLE OUT THERE.. PLEASE CORRECT ME IF IM WRONG..
IM JUST HELPING OUR FRIEND HERE..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
its not working. failed flashing with odin. i dunno what happen. is there any other solution. my tab is not rooted and for sure usb debugging also off. maybe flashing with odin failed because usb debugging is off right.
Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Do you have a CWM back-up from a previous ROM?
Sent from my GT-P6210 using xda app-developers app
unfortunately no
Sent from my GT-P6200 using xda premium
seking said:
Since upgrading to JB 4.1.2, I am not able to downgrade to ICS. After the flashing ICS via odin or for that matter mobile odin, is complete, it goes into a boot loop. Only way way out was again flash Jelly bean, it worked. Is there any firmware with full components like pda separate file, CSC separate file and phone separate file? I have heard that we need to flash these separate files via odin to downgrade. can anybody give a download link for the same?
Click to expand...
Click to collapse
you must go to stock ricovery ( with power + volum up ) and then wipe data
( your data are remove ( factory riset )
sorry for my bad ENGLISH
But I have heard that if one wipes factory reset through stock recovery, I am afraid one is liable to get bricked devices.
Sent from my GT-P6200 using xda premium
I would research the factory reset option. It shouldn't brick your device.
Sent from my GT-P6210 using xda app-developers app
deleted
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
I thought it was the opposite... (at least for ICS)
Alway wipe in cwm
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
NO! Wipe data in STOCK recovery brick your device, but if you wipe in CWM you are safe.
For downgrade use this guide:
http://forum.xda-developers.com/showthread.php?t=1777003
skurys said:
I thought it was the opposite... (at least for ICS)
Click to expand...
Click to collapse
i do this work when i have this tablet
i had the cyanogen mod 10 and 10.1 and paranoid.
when i want back to stock rom i need to do this work and my tab doesn't break
but in JB i dont sure. i think other member are better than me.
sorry for my english
S-AJAD said:
don'd worry
if you wipe in stock recovery your divice aren't break
if you wip in cwm or other castom recovery with stock row your tab are breaked
Click to expand...
Click to collapse
Just to make it clear.. wiping from stock is Safe IF you are in HC or JB ( someone said its safe ) but a big NO in ICS because it causes the tab to be bricked.. wiping from CWM on all roms is SAFE.. pls.. get your facts right..
Sent from my GT-P6200 using XDA Premium HD app
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
goodwellbest said:
If you want to downgrade from official JB to official ICS, you have to have .pit file
You can search pit file for P6200 in XDA and using odin to flash official ICS with option re-partition checked
First time, when my friend downgrade without .pit file, tab got stuck at SS logo even wipe everything fully. With .pit file, it succeeded
Click to expand...
Click to collapse
Is it necessary to have three different files ie pda, phone and csc when using pit file eith repartition checked?
Sent from my GT-P6200 using xda premium
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
You can downgrade to HC, do wipes and flash ICS.
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
JAYZE said:
i usually do encounter this on my 7.7 when i flash hc from ics...what i did was wipe the device using cwm after flashing the older firmware to fix the bootloop...
my friend have tab 7 plus and i'm planning to flash jb on it...is the stock JB recovery free from the brickbug?
Click to expand...
Click to collapse
I guess it is safe becoz someone did it already and it did not got brick.. if i were you.. after flashing jb.. flash the CWM.. then from there do the wiping
Sent from my GT-P6200 using XDA Premium HD app
goodwellbest said:
No, just ICS Stock Rom with .pit file
P6200 pit file in this thread (http://forum.xda-developers.com/showthread.php?t=1667886) works fine
Click to expand...
Click to collapse
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
Did you check option re-partition in Odin?
By the way, stuck at SS logo is quite often happened if you did not wipe. You should try to perform full wipe.
There is an issue related to wipe using ICS stock recovery, you should use Odin to flash CWM recovery (without .pit file) and use CWM recovery to wipe.
seking said:
I used the pit file and the ics stock and flashed using odin, the flashing went off smoothly with odin saying success. But after booting mine stuck at the samsung animation for eternity. Again I had no other alternative than flash jb back again.
Sent from my GT-P6200 using xda premium
Click to expand...
Click to collapse
when you are stuck in bootloop flash cwm recovery and do a full wipe..that will fix it...avoid full reset using stock recovery to prevent brickbug
I tried flashing a 4.1 rom and started getting a bootloop into recovery. I flashed the 2.3.6 DDLF2 rom and the phone comes up till the bootscreen and the reboots. Any help?
If you have backup... Restore it. If not you need to flash stock rom with flashtool
Sent from my ST25i using xda app-developers app
Link?
Just search flashtool on Google and which phone you are using..
Press thanks if I helped
Sent from my ST25i using xda app-developers app
sauravrockable said:
Just search flashtool on Google and which phone you are using..
Press thanks if I helped
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
If you mean Odin(which is the flashtool for Samsung), I have tried using it to flash stock firmware but I get a bootloop. If it is anything else please specify or give a link.
You need to flash stock rom I don't have Samsung phone so I don't have link but search a bit you will get it.... Somewhere!
Don't forget to press thanks
Sent from my ST25i using xda app-developers app
jdgreat4 said:
I tried flashing a 4.1 rom and started getting a bootloop into recovery. I flashed the 2.3.6 DDLF2 rom and the phone comes up till the bootscreen and the reboots. Any help?
Click to expand...
Click to collapse
Flash full DDLF2 from following link with odin with pit/pda/modem/csc/bootloader
http://forum.xda-developers.com/showthread.php?t=2329200
Use only Odin 1.85, download from above link.
Once booted, go to the recovery Select Factory Reset, Reboot.
Remove the battery boot the phone into download mode and Flash DDLF2 again.
The procedure is if you are coming from other custom rom with different partition then Flash twice, factory reset inbetween.
jdgreat4 said:
I tried flashing a 4.1 rom and started getting a bootloop into recovery. I flashed the 2.3.6 DDLF2 rom and the phone comes up till the bootscreen and the reboots. Any help?
Click to expand...
Click to collapse
Forget The Others
Flash XXKPE With Pit And Other 4 Files
Then After Completing The Setup And Again In Download Mode Flash DDMF1 [Latest Firmware]
jdgreat4 said:
I tried flashing a 4.1 rom and started getting a bootloop into recovery. I flashed the 2.3.6 DDLF2 rom and the phone comes up till the bootscreen and the reboots. Any help?
Click to expand...
Click to collapse
download XXKPE from here http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
follow the instructions in this thread (thanks to Misledz for this thread).
download DDMF1 from this thread (thanks to karthik gowtham for this thread).
install DDMF1 using odin3 v3 (use the value pack install instructions) .
.
hope this was helpful