I read somewhere (I think on these forums, but I can't find the thread right now), that some people had the problem when they dropped their TF, that the display stopped working. I'm having that problem now, no display at all, but other than that, the Transformer is working fine when plugged into HDMI (touch screen still works). What I read was that its possible its a loose cable inside.
Does anyone know what cable it would be? My screen is also now cracked, which is why I'm not sending it to Asus for warranty repaired, because I'm pretty sure they won't repair it with the cracks going across the screen.
I have the tablet apart, and can see most of the cables, and they all look pretty snug. Any suggestions?
Related
I've got a transformer, and the screen doesn't appear to be working. My boyfriend bought it the first day it came out, dropped it, was able to play with it a bit. The battery died and he set it to charge, and after that the screen wouldn't work. The screen itself is fine, it just isn't displaying anything (He can't take it back for a warranty repair, because he threw out the receipt, that's why he threw it to me to look at).
When you plug it into a computer, the computer recognizes it and you can browse the files on it. When you use the hdmi cable to plug it into the tv you can see the screen of the tablet on the tv and you can use it, so it's not anything wrong with inside workings of the tablet itself. I took it apart and everything looked alright on the inside to me, nothing rattling around, and all the connections appeared to be connected tightly. I was able to see the slide to unlock symbol on the screen by shining a flash light directly on it while the unit was on, but it was really faint and hard to see.
Does anyone know what the problem could be? In a normal laptop I would say it's the inverter, but I'm not really sure if tablets use technology like that. I'm a bit at a loss here for what the problem could be and how to fix it.
Pretty close i would say its the digitizer though you will need to rma it to get it fixed
Screens break in many different ways, just because there is no crack or leaking LCD look to it doesn't mean its fine
I would place my bets on the screen being damaged, although the board could have cracked or a solder joint could have come lose or a tiny tear in the ribbon cable
Screen is the most fragile though
I had the same problem, and after opening the TF everything looked fine too. It was not. What I did was to unplug all the cables and plug them all again. Problem solved.
Probably the screen cable got a little loose after the drop.
Good luck.
I have had a loose cable issue with my TF101 for a while. Within the warranty period I first had the issue where the screen cable becomes loose and makes it seem like the screen is dead, when in actuality it's just the cable.
(reference:
video
pic)
I sent it in and they fixed it. Shortly after I had the problem again and fixed it myself, because I was pretty certain what the issue was. For a while after resitting the cable in the connector jack, I had no problems. Then just recently I had the issue again. This time I noticed the screen wasn't completely blank, just extremely dim. I snapped the cable back in and it worked fine, again. Then a week later - a few days ago - it had the same problem. Dim screen. I open it up again, make sure both sides of the cable are seated properly, but can't seem to fix the issue.
Regardless of my opening it, the TF101 is out of warranty now. Any ideas of why the usual fix is no longer working? Any ideas of what I can try to do to fix it? Is it possible to find a replacement for the cable anywhere?
Thanks.
So I broke my digitizer glass a few weeks ago. I ordered a new digitizer off ebay... I made sure I ordered the correct version (it was the "no model version" or whatever). Installed it which was really annoying because of all the nasty glue.
Now I can't get the tablet to turn on at all. Before at least the LCD was functional. The red charging light comes on when I plug in the charger but that's it.
Any way I accidentally broke a cable or something when I was taking it apart? I checked it all and everything seems fine... I really don't know what to do.
Assuming I can't get it fixed, think I could sell the broken tablet for anything?
Thanks!
zaner123 said:
So I broke my digitizer glass a few weeks ago. I ordered a new digitizer off ebay... I made sure I ordered the correct version (it was the "no model version" or whatever). Installed it which was really annoying because of all the nasty glue.
Now I can't get the tablet to turn on at all. Before at least the LCD was functional. The red charging light comes on when I plug in the charger but that's it.
Any way I accidentally broke a cable or something when I was taking it apart? I checked it all and everything seems fine... I really don't know what to do.
Assuming I can't get it fixed, think I could sell the broken tablet for anything?
Thanks!
Click to expand...
Click to collapse
Of course you can resell the tab in its current state. Quickly or slowly depending on the asking price. But before doing that, you should check one more time. The fastest way is plug it to a TV monitor via the micro HDMI port. If it comes on, at least you know the system is working except for the video. Past that, there can only be two possibilities. (1) Bad lcd: something might have happened when you pried it off the broken digitizer; and/or (2) the video cable is bad, or improperly connected - by that, I mean you need to make sure it fits all the way in at both ends (mainboard & LCD). Check connection with a magnifying glass, You won't believe how many times people forget to reconnect the cable or connect it wrong. Lastly, if you did turn the service switch off, make sure it's turned on again. Good luck.
LCD to Mainboard connection...can it be connected "wrong"? Or simply not as snug as it should be?
Also, what is the service switch?
zaner123 said:
LCD to Mainboard connection...can it be connected "wrong"? Or simply not as snug as it should be?
Also, what is the service switch?
Click to expand...
Click to collapse
Here's the link to the relevant thread. Search for the necessary information within it. The cable that goes from LCD to mainboard is labeled: "MB" end goes to mainboard. The service switch is located at the top of the mainboard looking from the back, to the left of the power button ribbon (top right corner of tab), and is labeled "on"/"off". You should turn it off before doing anything. It cuts off all current to the boards and prevents accidental shortcircuitings. If you don't and mess around with the digitizer board, you might burn a fuse that controls the dig's operations. But this is for later. Go to the thread and browse it.
Hey guys,
I want to know if anybody tried to get a warranty repair on his TF700 with cracked glass.
I can't claim i NEVER dropped my Transformer, it has a small scratch on the side from about 8 months ago. About a month ago I noticed my screen cracked on edge after I woke up and tablet was laying in his case right where i put him. A week or so later I noticed that I can't lock it in the dock, the left hinge just wouldn't fit, however the dock still worked. After about two weeks I was on a yacht, the dock was stored in my cabin all the time, but one day I wanted to charge battery from it I noticed it's dead and not charging. After plugging it to charger in marina the light was not lit and when I connected dock to tablet it didnt recognise it. And then 2 days later I took Transformer out of my backpack at the airport and I saw another crack on the screen. Again it wasn't dropped, hit with a club, tossed, just put gently in the backpack.
The weird thing is I got 3 diffrent problems, all happening within a month and none of it was directly preceeded with any kind of misuse. I wonder if people at ASUS support are going to believe that I didn't abuse my Transformer in any way.
Anybody had simmilar problems and what was the result of RMA procedure?
Where are these cracks? I would assume along the bottom where it would fit in the dock but are they where the connection dongle is, on the side, ever notice it getting unusually hot when charging or smell anything? If I follow correctly then neither the tablet nor dock is charging regardless if they are connected or as individual peices.
I've had the dongle portion on my tablet go bad. I heard a pop after plugging it in, a faint smell of burnt something, and it didn't respond anymore to the usb cable. Connectiong it to the computer also resulted with nothing happening. They repaired it with no problem. Perhaps your port went bad and in the process caused the screen to crack. If the cracks are around the port area of course. How it ties into the dock not working now could also be related. Maybe it was the dock that went bad first but the signs showed on the tablet since it is easier to see.
Either way your tablet is useless if it doesn't charge. All you can do really is send it in for RMA and hope they don't claim it is customer induced damage. Try doing a Google search for the model you have and screen cracks. Might find something there following other people with cracked screens.
Good Luck
The person who had this device, gave it to me, telling me I could have it but that it had display issues. The display would intermittently cut out. He tried showing me how he would get it to come back on was by, flexing the device... He showed me a couple of times and I thought, to myself, I may be able to fix this. Then on one of the times, he must have flexed it too much because it cracked top to bottom. While it was working, I noticed it did display the desktop fully, leading me to believe that the LCD ribbon may have become unplugged. I was unable to find any information on replacing the LCD for the TF300T on YouTube, so where is it?
Also, the previous owner opened the device and lost the power button, so he would use a toothpick to turn it on. Is there a cheaper option than $11 USD on Ebay?