Hello there! I am re-posting this from the Mytouch 3G thread which can be seen here:
http://forum.xda-developers.com/showthread.php?p=6507176#post6507176
I have made some slight modifications in order to make this work on the Evo Shift.
This is a Evo Shift tool to easily convert images in splash screen ones.
This tool is based upon ffmpeg and you need it installed on your system before proceeding (it will prompt you about the program missing in any case)
REQUIREMENTS
ffmpeg installed on your system
a 480x800 image
a 480x800 device (i.e. Evo Shift) with engineering SPL
USAGE
Code:
./ElegosSplashCreator.txt --help or -h
Prints out how to use the script
Make sure that the script and image you are converting are both in the same directory that you are in in the command line (Terminal)
Code:
./ElegosSplashCreator.txt your_image_file
Converts your image into a flashable splash screen, if you want the script will continue flashing the file directly.
I ASSUME NO RESPONSABILITY ABOUT THE USAGE OF THIS SCRIPT. USE IT "AS IS", LOOK AT THE OUTPUTS AND YOU'LL AVOID BRICKS!
Please, if you wish to redistribute this script, give the right credits and don't change the prog_header please (maybe link this discussion in a text file)!
Make ElegosSplashCreator.txt executable permissions (right click on file and go to Properties > Permissions, then make executable) and use it!
Here's mine, feel free to post your own folks
Flash these Splash Screens at your own risk. It is not my fault if you have a faulty usb cable or computer, or accidently unplug your phone while flashing! But the chance of a soft brick is very small
Fastboot images to flash in fastboot:
Here is a .zip attached below with all these splash screens ready to flash in fastboot with pics that match the names of each image to flash
How to flash: fastboot flash splash1 name.raw565
Cool. Thanks for this sparksco I'll give it a whirl.
Sent from my PG06100 using Tapatalk
tambourineman86 said:
Cool. Thanks for this sparksco I'll give it a whirl.
Sent from my PG06100 using Tapatalk
Click to expand...
Click to collapse
Good luck, you can use any image type e.g. jpg, png ect. Just make sure it's sized to 480x800. Also post them here so we can all flash them
Here's mine...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bubbaearl said:
Here's mine...
Click to expand...
Click to collapse
Lol that's a good one and on another note. Thank you Sparksco
Sent from my Nocturnal Shift using Tapatalk
YoungCorruptionV2.0 said:
Lol that's a good one and on another note. Thank you Sparksco
Sent from my Nocturnal Shift using Tapatalk
Click to expand...
Click to collapse
If you like it just hit the thanks button.
Thread stuck.
can you make a splash screen out of this, I liked it so much I had to put my name to it
jrny99 said:
can you make a splash screen out of this, I liked it so much I had to put my name to it
Click to expand...
Click to collapse
Two things:
First of all the pic that you attached needs to be 480x800 (the attached pic is 495x800). I know it's only 15 pixels, but it screws things up.
Second, for the life of me I can't figure out the script in the OP. I do my splash screens an entirely different way. Have you tried the script in the OP?
By the way, if you end up using this as a splash screen, don't forget to hit "Thanks"'
bubbaearl said:
Second, for the life of me I can't figure out the script in the OP. I do my splash screens an entirely different way. Have you tried the script in the OP?
Click to expand...
Click to collapse
what I do is I put both the script and the pic in my home folder. That way when I open up terminal (command shell) I can run the script that way. The bottom of the OP shows how to run the script. He probably does not have linux set up or knows how to use it. It's common among a lot of android root users. That's why I posted mine to be flashable ready in a zip.
Sent from my PG06100 using xda premium
I keep trying to use this but I keep getting an error "image_name".raw565 no such file or directory
Omegapsy said:
I keep trying to use this but I keep getting an error "image_name".raw565 no such file or directory
Click to expand...
Click to collapse
The image your flashing is named "image_name.raw565"?
Sent from my PG06100 using xda premium
How's this working out for everyone else? 25 views on my splash screens and no responses. Guess I'll take that as a good sign of not that many issues...
Works good I got tired of that bright white htc screen so I got the black htc color splash screen, looks great! Thanks for the great work!
Sent from my LG Spectrum 4G LTE using xda premium
Here is mine. I can't remember where I got it though. If anyone wants me to find the thread I will.
Sent from my PG06100 using xda premium
Edit: The original artist was Digital Blasphemy...
sparksco said:
How's this working out for everyone else? 25 views on my splash screens and no responses. Guess I'll take that as a good sign of not that many issues...
Click to expand...
Click to collapse
I keep meaning to check this out. I just forget, old age .
Does anyone have the stock splash screen? If not, will running the rru put the stock one back? I tried searching and didnt see anything about it and the one that was posted the link is acting up
sixxt9 said:
Does anyone have the stock splash screen? If not, will running the rru put the stock one back? I tried searching and didnt see anything about it and the one that was posted the link is acting up
Click to expand...
Click to collapse
when you ruu it returns everything to stock including the splash screen, so yes.
Sweet. That's all I needed to know. Bout to take this shift back to best buy ... just remembered i signed up for their buy back and I have an extra shift so I can't lose.
Related
This is the boot animation taken directly from the Nexus S, I installed root explorer and sent the animation to my phone. No resizing was needed as it looks awesome without it, plus I tried to resize it and it looked funny. I think it looks cool so I thought I'd post it for others to enjoy. There are two versions:
Version 1:
1. Download and move to the system/media partition and overwrite your existing bootanimation.zip
Version 2:
1. This is a flashable zip using edify script so it will work in clockwork 3.0+
If you like it give me a thanks. If not speak your mind. I'm trying to be a more constructive member of this society hehe.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome job Vinny, looks great! I used the 1st method and it worked like a charm!
Sent you a thanks and linked this in my sig.
Love it Used the second method and it worked perfectly. Would love to see a few more of these 3.0.0.5 boot screens, especially that dancing android one. I'm a nooby to these forums but I've been stalking all this gingerbread stuff since its first release and have been looking for some bootscreens on here for it. Much appreciated.
Used the flashable version. Worked great and looks great. Thanks!
I logged in just to mash that thanks button because I hate it when over 1000 people download something you post and you score 7 thanks.
-----
Sent from my CDMA Hero. I got some hot Froyo-on-Hero action here!
i really appreciate it guys, and rubyknight, i took the time to learn edify so(and this goes for anyone else), if you'd like anything formated to edify send me a message. id be more than happy to do it for ya! vayman that is awesome man i really appreciate u linkin it.
vinnypel2ella said:
i really appreciate it guys, and rubyknight, i took the time to learn edify so(and this goes for anyone else), if you'd like anything formated to edify send me a message. id be more than happy to do it for ya! vayman that is awesome man i really appreciate u linkin it.
Click to expand...
Click to collapse
No problem man, I always like to promote good work!
Sent from my Super Hero w/ some sweet Gingerbread!
I really want to try it but is it easily reversible? (I would use the flashing method)
Sent from my HTC Hero CDMA using XDA App
;11337241 said:
I really want to try it but is it easily reversible? (I would use the flashing method)
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
Sure, if you have another boot animation. Use a file manager to go to system/media, make a copy of the boot animation there and move it someplace else. Then just move the new one into system/media. It will ask if you want to over write, say yes, and reboot. Then, to go back, just move the copy you made back to system/media. Cake and pie.
If you have problems, gimmie a shout, and I can walk you through it.
-----
Sent from my CDMA Hero. I got some hot Froyo-on-Hero action here!
thanks user7618, thats on point.
vinnypel2ella said:
thanks user7618, thats on point.
Click to expand...
Click to collapse
No problem.
-----
Sent from my CDMA Hero. I got some hot Froyo-on-Hero action here!
Awesome job! Brilliant! 2nd method works perfect.
Sent from my HTC SuperHero GingerBread using XDA App
Good to hear it. Anyone have any requests for anything, ill give it my best shot to help ya. Im bored most of the day so it would help take up some time LOL.
I like that dancing android bootscreen in one of those froyo threads. I'm on my phone right now so I might find it later when I get home.
ES File Manager wont let me mess with the default boot screen for some reason so I very much appreciate your flashable one.
Sent from my HTC Hero CDMA using XDA App
vinnypel2ella said:
Good to hear it. Anyone have any requests for anything, ill give it my best shot to help ya. Im bored most of the day so it would help take up some time LOL.
Click to expand...
Click to collapse
Don't know if you saw this request on the themes and apps board? Dude said he would donate to whoever did it for him.
http://forum.xda-developers.com/showthread.php?t=952295
rubyknight said:
I like that dancing android bootscreen in one of those froyo threads. I'm on my phone right now so I might find it later when I get home.
ES File Manager wont let me mess with the default boot screen for some reason so I very much appreciate your flashable one.
Sent from my HTC Hero CDMA using XDA App
Click to expand...
Click to collapse
hey ill def do that for ya. i dunno which one your talking about (not the screaming droid right?). grab me a link an ill do it.
Root Explorer will not allow me to paste in the new bootanimation, telling me it's read-only. (CM7 2/16)
jckeyser said:
Root Explorer will not allow me to paste in the new bootanimation, telling me it's read-only. (CM7 2/16)
Click to expand...
Click to collapse
You have to mount /system as r/w. Just click the button at the top of the screen, then it'll let you do it.
Sent from my Super Hero w/ some sweet Gingerbread!
vayman said:
You have to mount /system as r/w. Just click the button at the top of the screen, then it'll let you do it.
Sent from my Super Hero w/ some sweet Gingerbread!
Click to expand...
Click to collapse
We'll just go ahead and pretend that I didn't ask a question about Read/Write options on a rooted phone. There may have been beer.
This looks awesome.... great work man
I found the gif of the HTC and the droid online and i edited "brilliant" turning in "rooted"...
The result is... quietly cool...
---------------WORKING DEVICES------------------
HTC Inspire 4G
HTC Desire HD (duh!)
HTC Evo
HTC HD2
HTC Thunderbolt
HTC Hero
HTC Wildfire
Tmobile G2
(if it works on your non-listed device please post it)
----------------INSTALLATION---------------------
If you use the Stock ROM rename it ATT_bootanimation.zip and copy it in the folder system/customize/resource/
If you use a custom ROM copy it in the folder data/local
If you use CyanogenMod7 ROM copy it in the folder system/media
----------------------------------------------------
VERSION 2.2 uploaded... Hope you guys like it!
Lighter and faster (still testing it... post comments please )
-------------------PREVIEW---------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-------------------DOWLOAD---------------------
DOWNLOAD LATEST VERSION
Nice job on that one.
I agree keep up the good work
I'm really really sorry for being a nooby and I hate being "that" guy whose always asking "How do I go about installing that?" but.....how do I go about installing that? Flash in CWM recovery?
I Am Stuck said:
I'm really really sorry for being a nooby and I hate being "that" guy whose always asking "How do I go about installing that?" but.....how do I go about installing that? Flash in CWM recovery?
Click to expand...
Click to collapse
Hehe, we were all there at one point, no worries man! I'm still learning
Download the zip file, rename it "bootanimation.zip" and move it to your data\local folder (overwriting the exisiting one).
I believe it's a little different if you're on a stock rooted ROM tho.
Hope this helps
constantschange said:
Hehe, we were all there at one point, no worries man! I'm still learning
Download the zip file, rename it "bootanimation.zip" and move it to your data\local folder (overwriting the exisiting one).
I believe it's a little different if you're on a stock rooted ROM tho.
Hope this helps
Click to expand...
Click to collapse
Thanks very much! Ya I'm using a stock rom so I'm going to have to move that elsewhere. I believe it was under system/customize/resource. I'm going to have to download this bad boy and find out!
We are all noobs in something or something else...
If you have the stock rom rename it ATT_bootanimation.zip and copy it in the folder system/customize/resource/
use ROOT EXPLORER and when you are in the folder above just push the Mount R/W button before you paste it...
And you should be all set...
Will this work on an evo?
.........at 8 am today someone poisons the coffee....do not drink the coffee. More instructions will follow.
Cordially,
Future Dwight
Vandelay007 said:
Will this work on an evo?
.........at 8 am today someone poisons the coffee....do not drink the coffee. More instructions will follow.
Cordially,
Future Dwight
Click to expand...
Click to collapse
I guess... which is the resolution for the EVO???
800x480
.........at 8 am today someone poisons the coffee....do not drink the coffee. More instructions will follow.
Cordially,
Future Dwight
Vandelay007 said:
800x480
.........at 8 am today someone poisons the coffee....do not drink the coffee. More instructions will follow.
Cordially,
Future Dwight
Click to expand...
Click to collapse
800x480 means that the larger side is the base??
(sorry i don't know how the EVO works...)
If the res is 480x800 (shorter side as base) than it'll work just fine..
Very nice. Clean and subtle.
I am running android revolution rom, can i not just install zip from sd in recovery and do it?
Is there any way to modify this bootanimation so that the "quietly rooted" screen stays on until the lockscreen/OS show? On CM7, I get a black screen almost immediately after the "quietly rooted" text shows up, and then a few seconds later the lockscreen appears. I've started using the Android Scribble bootanimation for the time being, but I really prefer this one. Thanks in advance!
Im loving this boot animation. Thanks
Love it. +1. But, because I also love the brilliant boot animation of TPC's optimized stock ROM, I ended up extracting the last frame from the zip and installing it as my splash screen, which works great.
I would like to add "with TPC optimized stock ROM" or some other language to the image, but can't quite match the "quietly rooted" font. Can you please tell me what font it is?
Mucho thanks.
Well actually it isn't a font. "quietly brilliant" is really handwritten... I recreate the letters for "rooted" using the ones in the original line as models... what you ask could be done but its quietly a pain in the butt.... lolol
I suggest you to use a complete different font an add it like a sort of tag underneath the qr line...
Sent with pride from my Inspire 4G
KaLiBLeeK said:
Is there any way to modify this bootanimation so that the "quietly rooted" screen stays on until the lockscreen/OS show? On CM7, I get a black screen almost immediately after the "quietly rooted" text shows up, and then a few seconds later the lockscreen appears. I've started using the Android Scribble bootanimation for the time being, but I really prefer this one. Thanks in advance!
Click to expand...
Click to collapse
mmm where did you place it? did you rename it as 'bootanimation.zip'?
TaterTot85 said:
I am running android revolution rom, can i not just install zip from sd in recovery and do it?
Click to expand...
Click to collapse
mmm no... you should use root explorer to put the fiel in the proper folder...
Roland_D said:
mmm where did you place it? did you rename it as 'bootanimation.zip'?
Click to expand...
Click to collapse
Yep; the animation works fine, it just cuts to a black screen for an extended period of time after the "Quietly Rooted" text shows before the lockscreen pops up.
I have succesfully got this to work on [ROM][Sense 2.1] GingerSense ReMix (B1)
OK...
The steps I took to do so..
Download Camera Zip: http://www.multiupload.com/EJI8A8SWT4
Using ROOT EXPLORER: extracted zip (sdcard/extracted)
I moved entire "Sense3_Camera-0.9" folder to: /system (for copy/paste ease)
GoTo: /system/Sense3_Camera-0.9/system/app (folder)
change permissions for HTCCamera.apk, HTCAlbum.apk (to: rw-r-r)
now GoTo: /system/Sense3_Camera-0.9/system/framework (folder)
change permissions for com.scalado.caps.jar (to: rw-r-r)
from their I copied content of each of the 4 folders in "/system/Sense3_Camera-0.9/system" to matching "/system" folder on device (and pasted)
rebooted phone
Camera 3.0 and Album WORKS!!!
---only issue is that "HD 720P (1280x720) setting in Camera will FC Camera so just set to "Widescreen (800x480)" to match The INC`s Screen Resolution!
--- And "YES" the 360 Panorama WORKS!
Hopefully someone smarter then I am can make the process easier.. I'm not a DEV.. just lucky in this endeavor.
Screen Shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great tip! Worked for me!
The Admiral said:
Great tip! Worked for me!
Click to expand...
Click to collapse
Glad to see someone else benefited from this post.. I'm kind of surprised more people haven't tried it.. or even better.. include it into the next 2.1/3.0 mix Rom
Sent from my ADR6300 using XDA Premium App
justjayhere said:
Hopefully someone smarter then I am can make the process easier.. I'm not a DEV.. just lucky in this endeavor.
Click to expand...
Click to collapse
I'll make it into a flashable ZIP when I get home today for you to post in OP if you want.
Does the camera rely on rosie or could this be done on any gingerbread rom?
Sent from my ADR6300 using Tapatalk
frostincredible said:
I'll make it into a flashable ZIP when I get home today for you to post in OP if you want.
Click to expand...
Click to collapse
That'd be wonderful! Because when I followed the steps in the OP it didn't change.
BTW I'm on GingerSense ReMix (B3)
I didn't have any luck either, although probably just operator error.
Any progress on the flashable zip?
Sorry about not making the ZIP y'all. Exam week is next week and I needed to get stuff done. I will make the ZIP when I get home today. Check back around 3:00PM EST.
frostincredible said:
Sorry about not making the ZIP y'all. Exam week is next week and I needed to get stuff done. I will make the ZIP when I get home today. Check back around 3:00PM EST.
Click to expand...
Click to collapse
Thanks... I'll put in opening post when you make the zip... but please note: the video recording might not work as well as the sense 2.. so please backup before installing manually or when the zip is completed.
Sent from my Incredible using XDA Premium App
justjayhere said:
Thanks... I'll put in opening post when you make the zip... but please note: the video recording might not work as well as the sense 2.. so please backup before installing manually or when the zip is completed.
Sent from my Incredible using XDA Premium App
Click to expand...
Click to collapse
Alright, got caught up at school, about to make the ZIP now, sorry for the wait.
Sweet! Can't wait to see/use it!!!!
Guess we are waiting longer? Lol
IIDIncII said:
Guess we are waiting longer? Lol
Click to expand...
Click to collapse
It's alllllll good, these guys are on a different level.
I'll be snapping all sorts pics this weekend (with camera from OP when its released).
Thanks guys!
Yeah, sorry, sent the ZIP to a friend to test it and said it didn't work, didn't wanna send yall something not working, I think it's a permissions thing, once I figure it out I'll get y'all hooked up.
frostincredible said:
Yeah, sorry, sent the ZIP to a friend to test it and said it didn't work, didn't wanna send yall something not working, I think it's a permissions thing, once I figure it out I'll get y'all hooked up.
Click to expand...
Click to collapse
Thanks for keeping us posted.
Sent from my Incredible using XDA Premium App
Here, think I got it, I'm at my beach house and my friend left his phone at his house, so you all need to be the testers. Try the attached ZIP. It's currently CWM2, so I also attached a CWM2 zip, just flash the TempCWM.zip first, it will take you to CWM 2.5.1.2 and then from CWM2 flash the Sense3Cam-frostincredible.zip and it should work. If it doesn't work tell me!
justjayhere said:
Thanks for keeping us posted.
Sent from my Incredible using XDA Premium App
Click to expand...
Click to collapse
No problem, thanks for y'alls patience.
It didn't work for me. I don't have any camera now in my app drawer.
Any suggestions or did I miss anything?
I flashed the temporary cwm then flashed the cam.
s_wall98 said:
It didn't work for me. I don't have any camera now in my app drawer.
Any suggestions or did I miss anything?
I flashed the temporary cwm then flashed the cam.
Click to expand...
Click to collapse
Did you not do a backup first? Try flashing evo cam in rom manager, under virtuous, extra goodies
Sent from my ADR6300 using XDA App
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
S-OFF is essential
Features:
Multiple flashes without closing the application.
Deletes all used files leaving you with nothing more than you had to start with.
Completely automatic, only user thing is to make a splash image, have a recovery img, a hboot img or a radio img.
Unified interface.
Completely in C#
Now supports BMP, PNG, and JPEG images. Not just BMP like NBIMG.
Usable on your Desire, Desire Z, Desire HD, EVO 4g, EVO 3D, Desire S, Incredible S, Thunderbolt and Sensation.
The application double checks the image dimensions to ensure no problems.
Also checks the created splash img file size to ensure no errors.
Click to expand...
Click to collapse
Prerequisites:
USB debugging enabled.
HTC and Fastboot/Hboot drivers must be installed.
Windows with .Net 4.0
Splash image, recovery img, a hboot img or a radio img. (not required for donate version)
Click to expand...
Click to collapse
What it actually does:
This app flashes the specific parts of the device (Bootloader, Recovery, Splash screen, and Radio). It's just a time saver.
The splash screen is the image before the boot animation, if you don't like the white HTC, then change it!
Click to expand...
Click to collapse
Credits to SA7039 for assistance and Google for fastboot, adb and dlls.
Post your SPLASH screens here:
http://forum.xda-developers.com/showthread.php?p=8367224
Got problems? Want to request features? Post a ticket
Click to expand...
Click to collapse
Changelog:
Code:
2.1.0.5
Added: EVO 3D, Incredible S, Desire S and Thunderbolt.
Added recent device display as the first button.
Updated pictures to be higher quality.
Fixed redo progress bug.
Added WiMax
2.1.0.1
Fixed a device bug that affected everything except for the Desire and Sensation.
2.1
Fixed checkboxes
Added 'Already in fastboot' button
Rewrote logging
Fixed donate button ;)
Added update notifications
Auto downloads data folder
Added path conversion to unicode, should help with localisation.
Added Desire HD and EVO 4g support.
Added Device list pages - moved DHD to second page with EVO 4G.
2.0.5
MsgBox for invalid splash image dimensions
Image displays in the center when selected
When you unselect a checkbox, it says 'No file selected.'
Menu button added in the file menu
Label changed Z/HD
Added 'Donate' button ;)
Now verifies that the splash img file is the correct size for flashing
2.0
Brand new, recoded entirely from the ground up.
Supports multiple devices, and image extensions.
Please consider donating .
Soon to come:
With Download Browser for all supported devices:
Click to expand...
Click to collapse
That's great but errm.... What's it for? Just thought I'd ask before hundreds of others do
Sent from my HTC Sensation XE with Beats Audio using XDA App
Loved it on the Desire, nice to see you here! Great tool!
meegs said:
That's great but errm.... What's it for? Just thought I'd ask before hundreds of others do
Sent from my HTC Sensation XE with Beats Audio using XDA App
Click to expand...
Click to collapse
This app flashes the specific parts of the device (Bootloader, Recovery, Splash screen, and Radio). Its just a time saver.
The splash screen is the image before the boot animation, if you don't like the white HTC, then change it!
Look useful...maybe the OP post isn't finished yet..
Will try it.
Supported OS's?.. prerequisites please boss? A few more instructions will save of lot of questions later!!
Thanks.
DJW6927 said:
Look useful...maybe the OP post isn't finished yet..
Will try it.
Supported OS's?.. prerequisites please boss? A few more instructions will save of lot of questions later!!
Thanks.
Click to expand...
Click to collapse
Added . Must of forgot to bring it over from the old post.
Cheers!
do we need Radio / Recovery / Bootloader / Slashscreen files ready in hand to flash it or does your app have all the neccesary files needed ?
awesam said:
do we need Radio / Recovery / Bootloader / Slashscreen files ready in hand to flash it or does your app have all the neccesary files needed ?
Click to expand...
Click to collapse
You'll have to have them ready in hand for the time being. That's on my todo list for one of the next versions.
Cheers!
Its good for noobs
Hay danward nice to see u on sensation ur android flasher worked so well on desire n I used it every time and recommeded it to every one
Any body tested radios??
Sent from my Sensation using XDA Premium App
Wow thank you the GUI looks super slick now
It was the best tool on desire n now on sensation its great
ziggy1001 said:
Wow thank you the GUI looks super slick now
Click to expand...
Click to collapse
danward said:
This app flashes the specific parts of the device (Bootloader, Recovery, Splash screen, and Radio). Its just a time saver.
The splash screen is the image before the boot animation, if you don't like the white HTC, then change it!
Click to expand...
Click to collapse
gotcha, thanks for letting me know, and for bringing us what promises to be a very handy tool
danward said:
This app flashes the specific parts of the device (Bootloader, Recovery, Splash screen, and Radio). Its just a time saver.
The splash screen is the image before the boot animation, if you don't like the white HTC, then change it!
Click to expand...
Click to collapse
Looks great! Can you please put that in the op?
Great work!
Sent from my HTC Sensation XE using xda premium
jdmarko said:
Looks great! Can you please put that in the op?
Great work!
Sent from my HTC Sensation XE using xda premium
Click to expand...
Click to collapse
I always thought they say a picture is worth a thousand words. The screenshots show that you can flash radio, recovery, bootloader or splash.
loved this on desire, now even better on Sensation
Thanks Dan....
Coming soon:
Android Flasher Pro (Donate edition)
With Download Browser.
Hi, how do I flash splash screen? So i plugin my phone to computer? Then what?
Sent from my HTC Sensation Z710e using xda premium
So as some of you know I made a tutorial on how to change the boot logo (or splash screen as it is called on some devices). That is the Ugly Dual Core screen that nowadays just says "my phone has half as many cores as yours and by the way it sucks because moto made it".
Anyways. It is actually a really easy process to make your own, but this one I made specifically for our CM 10.1 You can use it on any rom, and in fact you do not even have to be rooted for it to work, but it does say Jelly Bean and Android 4.2.2.
this is what it looks like on the device.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also attached are 2 more as seen in this thread. one black, one gray. gray might not look good since there will be black on top and bottom. see previews below.
Directions for installation:
Chose whichever you find easiest.
Method 1:
Download the attached ZIP FILE and flash it in any recovery. No wipe or anything required. You must have a bootstrap recovery of some sort obviously (like the one built in to CM 10) so you must be rooted. Reboot and enjoy!
Method 2:
Flash the BIN file with fastboot. NO ROOT REQUIRED
1. Put the BIN file in the same folder as a copy of fastbooot, or have fastboot in your path. If you don't know what I said, use the recovery method.
2. reboot into fastboot mode (hold vol. buttons while turning on and select fastboot)
3.
Code:
fastboot flash logo.bin logo.bin
fastboot reboot
4. Enjoy!
Method 3:
Only do this if it makes sense to you:
put the bin on the sdcard with adb or copy it, then cat it to /dev/block/mmcblk1p10. no reboot necessary, except to see it, duh.
Don't forget to say thanks, and if you want to make one yourself, it takes less than 5 minutes, see here: http://cleanimport.xda/index.php?Threads
Works good
Sent from my MB865 using xda app-developers app
Just a suggestion for the splash screen. How about something like this(excuse my bad drawing. XD):
The OG moto logo (in red) along with CM logo. Keep both the logos small and neat.
Just lose the text. I think it'll look much better and much more professional.
Cheers,
z
Sent from my MB865 using xda premium
CM-PRo said:
Just a suggestion for the splash screen. How about something like this(excuse my bad drawing. XD):
The OG moto logo (in red) along with CM logo. Keep both the logos small and neat.
Just lose the text. I think it'll look much better and much more professional.
Cheers,
z
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Like this? I can share the .psd if you want.
Well that's pretty good but i was thinking of a black bg and no text...
Sent from my MB865 using xda premium
If i remove the separator bar, will not look good. Bat can make some personalizable logos for you.
brianmoyano said:
If i remove the separator bar, will not look good. Bat can make some personalizable logos for you.
Click to expand...
Click to collapse
keep in mind it must be 540 by 540,not the shape of the screen unfortunately. looks good though. see my guide to convert to usable image
Sent from my MB865 using xda premium
lkrasner said:
keep in mind it must be 540 by 540,not the shape of the screen unfortunately. looks good though. see my guide to convert to usable image
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
edit:
and you can then just replace the bin in the zip to use that for install if u want. let me know if you make it and I can add to OP. that goes for anyone that wants one added. give me a 540x540 image, and I'll do the rest. or you can do it yourself and save me a few minutes.
Sent from my MB865 using xda premium
How about converting this one to a .zip flashable. Looks pretty wicked!!
Sent from my MB865 using xda premium
Please, create the flashable zip. I don't want to ruin someone's rom because a mistake of mine.
brianmoyano said:
Please, create the flashable zip. I don't want to ruin someone's rom because a mistake of mine.
Click to expand...
Click to collapse
Will do, keep in mind you really want a black background probably, because these just centr on the screen (same width, but not height), so something else might not look good.
I wish there was a way to make them full screen with our phone, but alas, there is not. I'll do both and you can see how they look anyways
Added the 2 new logos to the op as flashable zips. that seems to be the preferred method. you can always just take the bin out of the zip if you want to use another.
Ok, i'll keep in mind. Thx.
Will this look good?!
Low image quality of the CM guy?
Just another mod for more awesomeness great job ppl I'll take the black one Togo with a shake and fries
Atrix 2/ATT/BMM
1. STOCK 4.0.4
2. MIUI
3. PA 315 4.2.2
4. CMPA 4.1.2
6. KEXEC 4.2.2
Done that's great edition to my awesome Atrix 2.....great job!
lkrasner said:
very good information...
Can you please give me logo.bin file for attached pic. (resolution : 540*960)
Thanks in advance... Please give logo file...
Click to expand...
Click to collapse
Tech-G.ONE said:
lkrasner said:
very good information...
Can you please give me logo.bin file for attached pic. (resolution : 540*960)
Thanks in advance... Please give logo file...
Click to expand...
Click to collapse
Motorola isn't a google company anymore.
Click to expand...
Click to collapse