[Q] ICS Rom Help - Nexus S Q&A, Help & Troubleshooting

I flashed the ICS [AOSP] and then the WiFi patch after it booted and I played around with the home screen animations, new app drawer ect.
It was all working fine and dandy (minus a minor gripe - the WiFi icon was grey not Tron Blue ) until about 2:30 am EST. I was at work and out of the blue my data connection crapped out. I didn't make a backup (bad me ) before coming to work and moved the only good copy of my stock rom to my computer at home.
So about my data connection: I have changed the APN and selected the only Network I can connect to and nothing works. I had this issue before but cant for the life of me remember how to fix it.
Any thoughts?
I have a I9020A - on AT&T with [http://forum.xda-developers.com/showthread.php?t=1354263] and no other adds other then the WiFi patch. Though I will say, things started going screwy when I downloaded Rom Manager and Titanium Backup * Root.
Any Thoughts?

Wrong forum, mate. Post this in the ROM's thread. Also bear in mind that all ICS ROMs are alphas.

Related

CM7 on D2G - issues with APNs, possibly Rogers specifically?

I'm posting this on the four android-related forums that I participate in, in hopes that someone has seen this before and knows what to do.
Here's what I had:
- Droid 2 Global, unlocked, rooted, with Fission ROM, using Rogers Wireless, a GSM network in Canada
- it had been working just fine for 5 months
Here's what I did:
- Used RSDLite and the SBF loader to flash the stock 2.4.330 firmware as seen here: http://droid.koumakan.jp/wiki/SBF
- ended up with a bootloop, as the directions said I would. cleared data and cashe, no problem, phone booted.
- started up phone, switched to GSM mode, entered APNs, immediately had data service, tested phone functionality, all was well, used APN backup/restore and APN Manager to make backup files of my APNs
- Used stock recovery mode to upgrade to 4.5.607 (gingerbread) firmware as seen here: http://droid.koumakan.jp/wiki/4.5.607_Firmware
- I used the file linked to from here: http://www.droid-life.com/2011/08/22/gingerbread-build-for-the-droid2-global-leaks/
- started up phone, switched to GSM mode, entered APNs, immediately had data service, tested phone functionality, all was well, used APN backup/restore and APN Manager to make backup files of my APNs
- rooted phone using the adb method that is out there. rebooted and confirmed root access. installed a couple apps that need root. tested phone functionality, all was well. used APN backup/restore and APN Manager to make backup files of my APNs
- As described here, http://droid.koumakan.jp/wiki/CyanogenMod Installed Droid 2 Recovery Bootstrap and ROM Manager in order to flash CWM. rebooted into CWM, factory reset, installed the latest release (10/06), and rebooted
- started up phone, switched to GSM mode, phone app crashed immediately (as is to be expected, based on known bugs), rebooted for it to take effect
Now here's the problem:
- phone can make calls and receive texts with no problem, but cannot get data. wifi also works.
- went into wireless settings, mobile networks, access point names, nothing shows up. Clicked "add APN". entered the APN info that had worked for me before at the past two junctions. hit menu button, then save. takes me back to the APN screen, but no APN shows up.
- repeated this cycle a few times following reboots, etc. Eventually the phone gets to the point where the "add APN" button will not even come up when the menu key is hit.
- during the above, was also checking the "network operators" setting. The phone does locate all of the networks that are "in the air" but no matter which one I choose it will tell me "your sim card does not allow a connection to this network"
- used root explorer to check /data/data/com.android.providers.telephony/databases/telephony.db. There is a list of about 1500 APNs. There are multiple entries for Rogers including all of the ones I tried to enter that appeared not to save.
- used APN backup/restore and APN manager to attempt deleting existing APNs, restoring the ones that were known to work, etc. Nothing works. These programs do work, and when I check the telephony.db file I can see what they have done to the file, but they are unfortnately unable to make any APN "stick" at the APN screen, and apparently that is the only way that it will work.
more info:
- I've noticed that the list of rogers entries seems to get larger and larger as I go through this process multiple times. I may be wrong, but it seems that this telephony.db file might not actually get changed or updated when you flash a new kernel/firmware/mod/rom to the phone.
- I'm sure that the lack of a list of APNs and the "sim card does not allow connection" message are related. For whatever reason there seems to be a bug in CM7 where the telephony.db file has problems "talking" to the APN screen in settings. But it must not affect most people.
- yes, I have tried a new SIM card.
- yes, I have tried clearing cache, data, dalvik, and fixing permissions.
- Anyone else on Rogers Running CM7 on a D2G? If so, I'd love to talk to you. Maybe I could convince you to send me a working CWM backup. I imagine that if you're a conscientious rommer, you have a backup made folling a fresh install of CM7.
I used to do at one point. The froyo base 2011.08.13 version was the last one that worked for me. Newer ones boot looped if SIM card is inside, no matter what I do. I stopped trying after couple further releases all of which boot looped. Essentially quit using CM4D2G due to bluetooth not working with BT handsfree. Later, after the official Motorola GB release came, I have not even looked back. Since I like few BLUR features, especially dialler, the GB Motorola released suits me very well. With the doubled battery life and the MUCH BETTER GSM radio in 606/607 bulds, phone finally settled down and I can now rely on it.
I have CM7 on another of my phones - actually 2 of them - a Milestone and (recently) a HTC Vision - I love CM7.1 especially on the latter!
I assume your phone works fine with stock rom - right?
Edit: I have a XT860 which is in for repairs - once I get it back and I have a reliable daily phone I plan to experiment with the new GB based CM4D2G. Hopefully this week...
leobg said:
I used to do at one point. The froyo base 2011.08.13 version was the last one that worked for me. Newer ones boot looped if SIM card is inside, no matter what I do. I stopped trying after couple further releases all of which boot looped. Essentially quit using CM4D2G due to bluetooth not working with BT handsfree. Later, after the official Motorola GB release came, I have not even looked back. Since I like few BLUR features, especially dialler, the GB Motorola released suits me very well. With the doubled battery life and the MUCH BETTER GSM radio in 606/607 bulds, phone finally settled down and I can now rely on it.
I have CM7 on another of my phones - actually 2 of them - a Milestone and (recently) a HTC Vision - I love CM7.1 especially on the latter!
I assume your phone works fine with stock rom - right?
Click to expand...
Click to collapse
Yes, everything works really well with stock rom. I was quite impressed, as it was my first GB experience. Unfortunately, as with cars, I am all about the "options", and I can't seem to let go of a feature once I have experienced it. I love CM7 and I really want to make it work for my D2G.
I posted this same thing at the rootzwiki thread, and one of the head developers said "You my friend may finally have identified where the gsm data issues are coming from. it isnt just you, it's 98% of the gsm users that arent having data". Another user got me to change a couple of permissions. I thought he was onto something but it didn't work, either. Nonetheless, I think I brought enough attention to this issue and also gave them something to work with through all my trial and error. I am optimistic.
But, for now, I think I have to take CM7. I want my data! I am really tempted to just give stock GB a shot. But Blur scares me. Most people don't seem to like it, though I admit I don't fully understand what Blur is! I see there is MIUI and apex, angel Hexen and VenusX. I might have to try them first.
hallo!
had exactly the same problem! i bought a verizon phone an using it in greece!
But i simply dowloaded some APNs manager from the market and within 2 minutes my phone was connecting to the internet!! So if this worked for me i`m sure its gonna work for u too!!
greek_lover_69 said:
hallo!
had exactly the same problem! i bought a verizon phone an using it in greece!
But i simply dowloaded some APNs manager from the market and within 2 minutes my phone was connecting to the internet!! So if this worked for me i`m sure its gonna work for u too!!
Click to expand...
Click to collapse
Can you be more specific as to what you did? Because it sounds exactly like something I tried already. What was the exact name of the software you used? Was your problem 100% exactly the same as mine, or just similar? I literally can't make an APN show up at the APN screen at all.
seventieslord said:
Can you be more specific as to what you did? Because it sounds exactly like something I tried already. What was the exact name of the software you used? Was your problem 100% exactly the same as mine, or just similar? I literally can't make an APN show up at the APN screen at all.
Click to expand...
Click to collapse
Some people have this exact problem with the D3, looks like in the D3 placing the phone in airplane mode and then on again is enough to make the APN manager able to read the MCC/MNC codes and, consequently, to store the provided apn.
I wish it was that easy, but it's not. I have tried a number of solutions similar to that but no dice. I appreciate the attempt though.
Sent from my DROID2 GLOBAL using XDA App
For the record I have that problem on the D2g flashed with the latest builds of cyanogen rom, (with the same SIMs perfectly working on D3 and D2g with the stock rom), and the airplane mode trick doesn't works too.
So far I haven't found a solution
To get my wife's d2g to work in japan I had to use root explorer to manually edit a file. The file is located at etc/ppp/peers/pppd-ril.options mount the file rw and manually edit the user name and password to match your apn. Toggle airplane mode on off after saving changes and it should work.
Sent from my HTC S710d using XDA Premium App
Thanks, i guessed that if a proper fix may be hard to find, a workaround was easy enough, I'll try it later with the gingerbread froyo.
dobosininja said:
To get my wife's d2g to work in japan I had to use root explorer to manually edit a file. The file is located at etc/ppp/peers/pppd-ril.options mount the file rw and manually edit the user name and password to match your apn. Toggle airplane mode on off after saving changes and it should work.
Sent from my HTC S710d using XDA Premium App
Click to expand...
Click to collapse
sounds interesting. I will give that a try the next time I flash CM7. I moved on to Apex. It's ok, but absolutely dreadful for battery life. I can't imagine CM7 is any better considering it has about 50 more bells and 125 more whistles. But I do prefer CM7 to anything else so as soon as I actually have some tweaking time again, I'll give this a shot.
Since both CM7 and Apex are built off the same firmware, I could just flash them overtop eachother, and wipe date and cache, right? As long as it's that easy, I could see myself trying this sooner.
seventieslord said:
sounds interesting. I will give that a try the next time I flash CM7. I moved on to Apex. It's ok, but absolutely dreadful for battery life. I can't imagine CM7 is any better considering it has about 50 more bells and 125 more whistles. But I do prefer CM7 to anything else so as soon as I actually have some tweaking time again, I'll give this a shot.
Since both CM7 and Apex are built off the same firmware, I could just flash them overtop eachother, and wipe date and cache, right? As long as it's that easy, I could see myself trying this sooner.
Click to expand...
Click to collapse
I gave this a try, and no dice. Too bad.
Thanks anyways.
The Solutor said:
Some people have this exact problem with the D3, looks like in the D3 placing the phone in airplane mode and then on again is enough to make the APN manager able to read the MCC/MNC codes and, consequently, to store the provided apn.
Click to expand...
Click to collapse
I now own a D3. CM9 is doing the exact same thing to me!
I tried what you said and I am still not getting data. phone and texts work though, just like before.

[Q] CM9 Alfa 17 data not working

I followed directions to wipe everything as suggested in this post:
http://forum.xda-developers.com/showpost.php?p=20485148&postcount=146
Was using Alfa 13 just fine, but on Alfa 17 I can not get cellular data to work. Confirmed my WAP settings are correct for my carrier.
My baseband it says its a i9020xxkf1 and everything else on the phone works. I can access the market, wifi works, account sync if i have wifi on. I have doubled checked every possible setting. But it will not bring up a data connection over the cellular radio. It even takes calls over the radio. Just no data connectivity.
Any suggestions or reasons why this is occurring? I can easily swap back to an older nandroid image of alfa 13, but I would really like to get on a new version etc.
(Also, I would have made this post in the right dev section, but i lack 10 posts to gain access to it.)
Have you tried removing and replacing your SIM card ?
Also, check if your data counter has a limit set on
You could also manually configure your APN settings with your carrier's settings
Unfortunatly I have done all of those things. It doesn't even attempt to connect to data. I sit at 4 or 5 bars of signal and it never even connects to EDGE/3g at all. Yet if I flip back over to my older image it works flawlessly.
i have also problem with version 17, but i can't post it to developer forum (newbie here)
problem is that i can't hook on any network, no calls no messegas, i'm using croatian tele2/t-mobile....sometimes it connects but still nothing, no calss etc.
also problem (not so much a problem but a solution) when i installed ROM it went to bootloop, all you have to do is remove battery and power up again, and voila, it works, same problem happened when i installed gapps (same solution worked, everything installed from CWM latest version)
there were also posts regarding cwm not stiking after installing cynogen, i had no problem with it, i have latest cwm 5.0.2.3 (think so), sticks like hell tried couple of roms, still sticking
cheers
I have the same problem here... ICS 4.0.3 and my 3G stopped to work.
also tried new 18 version, still no luck, i'm staying on cynogenmod 7 (GB), only ICS version that worked was MUI but i don't like it very much....
http://forum.xda-developers.com/showthread.php?t=1398691
It has been messed around with a fair bit. Various methods have worked for different people. YMMV. I myself had such an issue with the stock FW (of all FWs...).

No sync after radio update

My adventures with the HTC One S just dont seem to end. Here is a short history:
First thing I did when I got the phone was flash over CM9 as I dont like Sense
All was good until the home button issue popped up, this was at that time my only issue and sync worked just fine
I flashed over CM10 when it was stable enough, this didnt fix the home button issue though
I then flashed over the new RUU with radio 2.21 and directly after that CM10 again (I still dont like Sense)
After the first flash I had a lot of grey signal bars (either bad signal or no connection with Google servers) so I flashed CM10 again.
The signal bars where blue after that and the new radio (2.21) has improved the signal a lot and therefor minimizing the home button issue
But since the new radio I'm experiencing a new problem, just as much annoying. My phone wont sync when the screen is off or wont sync at all unless I do it manually.
This is what I have tried so far:
First cleaned cache from Gmail, Google Services Framework and Market -> no fix
Rebooted the phone with airplane mode on and enabling data connection afterwards -> no fix
Factory reset from recovery, flash CM10 again and restore apps with TB -> no fix
Factory reset from recovery, flash CM10 again and no restore of apps but just vanilla CM10 -> no fix
I have ran out of options so I could use some help here. Why are emails not pushed to my phone when the screen is off?
I had all kinds of sync issues with that radio until I flashed Trickdroid 7.1 which is built off the base which included that radio. Can't figure out how, but it's like they work best together though my best guess is that TD just maintains more free memory, so whatever process syncs the phone doesn't get killed. You can even desense TD as part of the tweak pack if you want to try it
Sent from my HTC One S using xda app-developers app
el_smurfo said:
I had all kinds of sync issues with that radio until I flashed Trickdroid 7.1 which is built off the base which included that radio. Can't figure out how, but it's like they work best together though my best guess is that TD just maintains more free memory, so whatever process syncs the phone doesn't get killed. You can even desense TD as part of the tweak pack if you want to try it
Click to expand...
Click to collapse
Hmmm ... thanx for this info. I hoped the problem was not related to the radio and I missed something stupid. When I have some time I'll make a nandroid backup of CM10 and will give Trickdroid 7.1 a go, see if it fixes things.
Another solution I was thinking of was buying Tasker and schedule a sync job. When set up right it might even save me some battery juice.
el_smurfo said:
I had all kinds of sync issues with that radio until I flashed Trickdroid 7.1 which is built off the base which included that radio. Can't figure out how, but it's like they work best together though my best guess is that TD just maintains more free memory, so whatever process syncs the phone doesn't get killed. You can even desense TD as part of the tweak pack if you want to try it
Click to expand...
Click to collapse
I tried Trickdroid 7.1 today but spent no longer then 5 minutes on this ROM. Although I selected all options of going back to stock and removing anything related to Sense in the Trickdroid Tweaks it was no where near the AOSP feeling I like best. So I didnt like Trickdroid at all.
Didnt properly test the syncing but in the one test I did I received my email instantly. So I guess there is indeed a problem with the new radio and CM10. I'll report this in the CM10 support thread.

Synergy rom R67/Browser stopped loading pages

Hello,
Although my post count will show I am totally new here. I am quite comfortable with flashing/etc.
I have been running the Synergy rom since 1.4 and I absolutely love it.
(full wipe of the phone)
I recently installed the R67 nightly (wiped cache/dalvik)
After R67, I noticed that my browser would not load pages completely. It would show about 90% on the status bar and it just stops.
I have had the problem before on my HTC Incredible so I went through the normal motions.
Tested Wifi/3g/4g....all show the same behavior.
Cleared "data" for the app...
Cleared app cache....
Wiped system cache...
Force closed the app...
This was all still showing the same result.
I installed Chrome...same result?
That kinda threw me...I was expecting it to be limited to the stock browser.
I installed Firefox...eureka! it is working now....for about 4 pages...now the same thing is happning to it.
I hate to even appear to be calling out the Synergy guys. I think they have a great ROM, but it is the last thing to change on my phone. So I am reaching.
I did go through a few recommendations from other phone models, remove proxy from APN settings..etc..
I can not seem to figure it out.
Anyone else on R67 seeing this? Is it something more fundamental to the phone itself?
120 views and no reply...
I am assuming I am the only one with this issue?
iamxero said:
120 views and no reply...
I am assuming I am the only one with this issue?
Click to expand...
Click to collapse
Love your opening line, I am in the same boat in regards to post count!
Have you flashed over the latest R68? I did not use 67 at all, infact started at 64, played with some JB developments, and came back to the most current 68 (with a darkhorse rises awesome theme!). I did not have any browser issues on the 64 build, and have "none" on the 68 build - well sort of: I have noticed that when I have been on wifi for a while, when disabling wifi, the data connection (which shows in the status bar as ok) seams to freeze up. Similar symptoms of what you described. What I had to do was disable the auto wifi connect, open an instant data drawing app (play store), close it, re-open it once or twice and boom! 4g data as advertised snaps back into action without any issues until I start using wifi again for a long period. This freeze appears to only happen when the auto wifi connect is enabled (need to verify that a bit). I would flash the current nightly and test. Chrome also seams to work a bit better than the stock browser, as it should. Stick with the rom, as you know its great. Hope that helps.

Blaze Signal Keeps Going Out Problem(On Any ROM!)

So here's my issue, my Galaxy S Blaze has been switched from ROM to ROM constantly, I have seen ROMS with modified build.props, other added features, and a bunch of other tweaks, you name it! I don't know what all those tweaks mean, I have no idea if it could affect the way my phone receives the signal but it got me so frustrated that I kept switching roms until finally then I went back to stock and am no longer am switching to another ROM.
Here's a history of the ROM switching I've made in the past couple of months:
1st - MIUI
2nd- Cyanogenmod
3rd- Gummy ROM
4th- Liquidsmooth ROM
5th- Cyanogenmod
6th- Dirty Unicorns (problems with signal started occurring right about here, and onwards)
7th- Stock ROM (hmm... nope nothing fixed.)
8th- Validus (still no, I didn't like the constant force-closing of many apps)
9th- Gummy ROM (nope, what's worse is my screen kept freezing if I had atleast 2 apps open and I slid down the notification drawer)
10th- Cyanogenmod (well, maybe switching to cyanogenmod will fix it)
11th- Gummy ROM (*sigh* switching back? Nope, still didn't help my signal)
12th- Stock ROM (you would expect it to be fixed right about here, but nope)
So what's up what is the exact problem with my signal? Here's the thing: My signal works! That's a start atleast. However, if I turn on my Wi-Fi while I'm home, I can still call/text people, all of that works. But after maybe 2 hours or so, the signal bar is still there, it's telling me it has signal and it's connected, SOMETIMES it will be empty meaning I have no signal(when I really do). But in reality, I can't receive texts, nor calls, none of that. So how do I fix it? By restarting my phone sadly, that has been the only solution for me for these past 2 months. People have complained to me because I don't answer my phone anymore, well I'm sorry my phone can't receive those calls due to this messed up signal. There are 3 other T-Mobile phones in the house that have no problem! The problem here is with my Blaze phone.
So what if I turn the Wi-Fi off for the whole day and see if it's the main thing causing the issue? Well, I did this. Turns out that the signal stays on longer than when I'm on Wi-Fi but it still goes out. I have switched SIM Cards, I have tried switching my APN: from "epc.tmobile.com" to "fast.t-mobile.com" but the problem appears to happen more quickly on the "epc" one than the "fast" one. Please help me with this, this has been frustrating me a lot lately. I'm not sure if anyone has even had the same exact problem that I'm having, I've searched online but haven't seen a similar problem.
Some of you might say, wow that is a lot of ROMS you've switched to, I'm sure there were more that I missed but that's as of recent. I can install ROMS correctly, I know how to use CWM when installing a .zip and using Odin when it's a .tar(or other supported file extensions). I've factory reset, wiped the cache, the dalvik cache, all before installing a new rom. After installing each rom, I've also factory reset and wiped the cache to make sure no other problems could affect the way the rom would work. Hopefully I did the procedure right, thanks for anyone who's willing to help me!
Right now I am running:
Baseband Version:
T769UVLH5
Kernel Version:
3.0.8-perf-T769UVLH5-CL990184
[email protected] #1
SMP PREEMPT Fri Aug 17 15:12:14 KST 2012
Android Version:
4.0.4
Another Issue is that I can't even transfer files to and from my phone when connected to my computer! This is another big issue, here are some images:
http :// i.imgur.com/xx699ss.png
http :// i.imgur.com/1wRzJpX.png
Here's what happens when I turn Wi-Fi Calling on but maybe it's just a built-in function that I forgot it had and it's probably normal:
http :// i.imgur.com/cTSqRci.png
By the way, sorry for the links just copy and paste them in a browser to and remove the spaces between the http :// and i.imgur, thanks! Unfortunately, I can't post links until I reach 10 posts. If the links don't work for you, I've also provided attachments.
Many thanks!!!
That last picture does show the proper function of Wi-Fi calling however I don't know what to say about the rest of your problems.
Sent from my SAMSUNG-SGH-T769 using XDA Free mobile app
There are two things I would recommend trying...
1. Use Blackhole System Wipe
I know you've been following all the proper steps in CWM (and I would say to keep doing so), but I've added using Blackhole, in addition to the first steps, and I always get great system performance on my phone, and my parent's phones (I put them on ProvisionMod after stock was being stupid). It works well for pre installation for ANY ROM and helps prevent pesky issues. However, chances are, your issue is baseband related and this probably won't solve it... But still! You never know! It's worth a shot!
2. Reroot your phone
I know this will be annoying and pesky... but sometimes the process goes wrong from the beginning and starts giving issues later on... When I first rooted my mom's blaze, something went wrong, despite my following all the directions, and one of her partitions was completely disabled, no matter the ROM. I redid the process of rooting her phone (not from GB though... From the ICS stock) and fixed the issue instantly! I would try these two steps first and see if they do anything! Good luck!
Sent from The Doctor's Blaze

Categories

Resources