Accessing Toolbox via Term? And GB 2.3 Q's - Verizon Droid Charge

Okay ... Don't laugh at me !! Have had the Charge since release date. This whole time I have been running stock rooted EE4 with CWM Voodoo Lagfix. I had to have a replacement phone sent to me as my CDMA radio died. Phone still worked on LTE radio. CDMA would be intermittent at best.
On to my question. I am planning to give GB a try and I am reading in threads about the toolbox and to access it via Term? I am assuming term is terminal function. This part is entirely new to me. Could someone point me to some term primers so I can research this?
Also, I have downloaded and extracted my Bloated_EG2__Gingerbread_ ODIN. Then I have
GummyCharged_GBE_2.0
GummyChargedGBE2.1
CWM_Recovery4008
I am assuming the EG2 includes CWM. If not, which will be easy enough to find out when I go to enter recovery, I will install the CWM I have downloaded. From what it appears to me, GBE_2.1 is an update to GBE_2.0 .... Thus I assume I need to install 2.0 followed by 2.1
Does this include voodoo lagfix? Or is that not needed when I up the phone to GB 2.3?
Just trying to sort this out and be informed before I start flashing this thing. The phone is stock out of the box EE4 as of right now.
Any help will be greatly appreciated.
Thanx In Advance,
Steve

Chopstix9 said:
Okay ... Don't laugh at me !! Have had the Charge since release date. This whole time I have been running stock rooted EE4 with CWM Voodoo Lagfix. I had to have a replacement phone sent to me as my CDMA radio died. Phone still worked on LTE radio. CDMA would be intermittent at best.
On to my question. I am planning to give GB a try and I am reading in threads about the toolbox and to access it via Term? I am assuming term is terminal function. This part is entirely new to me. Could someone point me to some term primers so I can research this?
Also, I have downloaded and extracted my Bloated_EG2__Gingerbread_ ODIN. Then I have
GummyCharged_GBE_2.0
GummyChargedGBE2.1
CWM_Recovery4008
I am assuming the EG2 includes CWM. If not, which will be easy enough to find out when I go to enter recovery, I will install the CWM I have downloaded. From what it appears to me, GBE_2.1 is an update to GBE_2.0 .... Thus I assume I need to install 2.0 followed by 2.1
Does this include voodoo lagfix? Or is that not needed when I up the phone to GB 2.3?
Just trying to sort this out and be informed before I start flashing this thing. The phone is stock out of the box EE4 as of right now.
Any help will be greatly appreciated.
Thanx In Advance,
Steve
Click to expand...
Click to collapse
EG2 is really old, you may want to go with a more recent GB leak like EP1Q/EP1W/EP3H... second no rom packages include CWM but are for the most part all rooted, CWM you will have to install with Odin after the rom then flash Gummy 2.0 and the 2.1 patch with a bootup between each rom flash to make sure it worked properly
edit: probably should've answered more questions Gummy 2.0 has a kernel with voodoo lagfix so it will enable after flashing the rom on first bootup, also the command terminal is fairly straightforward to use, I think the Gummy rom threads have a how-to in the OP on basic terminal commands... also as for your radio not working, it was probably a 4G sim issue as the CDMA and LTE radios are both controlled by the sim so if one doesn't work the other won't either, there may just not be as strong a CDMA signal so it seemed like it wasn't working

Great info thanx .... now when I go to update to 2.0, from the reading and even watching the video, I am going to delete all caches prior to flashing the 2.0 ... with the 2.1 just being a patch, can I just install it after verifying 2.0 works? Or should I delete the big 3 again before that one?

Chopstix9 said:
Great info thanx .... now when I go to update to 2.0, from the reading and even watching the video, I am going to delete all caches prior to flashing the 2.0 ... with the 2.1 just being a patch, can I just install it after verifying 2.0 works? Or should I delete the big 3 again before that one?
Click to expand...
Click to collapse
just cache and dalvik I think (might not even need that but I'd probably do it to be safe), don't delete data or it will wipe Gummy off and you'll have to reflash

Related

I done goofed, need some advice.

Hey guys,
I got my first real smart phone about a week ago, it was a USC Samsung Mesmerize. Yesterday I stumbled upon rooting when trying to figure out how to remove useless pre installed apps. All I really want is a slim & fast version & to be able to keep my navigation.
I've had experience with flashing; Xbox 360 & PSP's. So I kind of jumped into this and ended up bricking my phone. Or damn close.
From looking at the back of my phone it says Galaxy S, so I went in that section and downloaded/flashed this originally (caused brick):
http://forum.xda-developers.com/showthread.php?t=940671
I did everything up to step 7, except it wouldnt boot past the splash screen.
So then came panic time...
I eventually reflashed with a new rom for the correct phone, This one to be exact:
http://forum.xda-developers.com/showthread.php?t=944671
My question is:
What have I really done now that I run on this rom?
I still cant uninstall preloaded software.
I would be willing to flash a new rom so I can have a faster phone.
But really no one makes it clear enough in there guides about how this process actually works.
my best guess is after I flashed with that rom I will be able to upgrade to a better rom?
What is FROYO EA11?
What is voodoo?
First off, consequences will never be the same...
You are now running a STOCK (leaked) 2.2 ROM, with a stock kernel and USCC App Bloat.
If you want a fast Android 2.2 with stock apps removed, do this:
1. Flash the EA11 + recovery via Odin, following the steps here.
2: Download the EA11 voodoo kernel found here and flash.
3: Boot into recovery and run update.zip (this will push you to a red clockwork recovery)
HINT: If you aren't familiar with clockwork recovery, the controls are slightly different. You use still use the volume buttons to navigate, but the power button is now used to execute selections and the search softkey to go back.
4: select install .zip from sdcard
5: select the voodoo .zip and confirm
This will install the new kernel and replace your recovery (which used to require booting into the Samsung recovery before making your way to the clockwork recovery by installing update.zip from sdcard) with a clockwork recovery that will look identical to the one you had after running update.zip, but can enable your newly acquired lagfix.
6: enable voodoo lagfix, and rejoice!
6: Optionally install the Pick and Pack ROM found here. (I WOULD!)
(Credits to MesmerizeUser for these steps, I copypasta'd and edited.)
Good luck with your back-tracing! Let us know if any steps are unclear.
Also, the payed version of Titanium Backup will let you "freeze" stock apps, so they don't appear in your menus, and they won't run, but you can "thaw" them whenever you like.
PS - FROYO EA11 is a leaked Android 2.2 ROM for the Mesmerize. Google names Android releases after deserts, like Donut, Eclair, Froyo, Gingerbread, Honeycomb, etc.
Voodoo is a name of the kernel which changes your EXT2 partition (old school) to EXT4 (new school), and makes your file system much faster.
uselessmidget said:
Hey guys,
I got my first real smart phone about a week ago, it was a USC Samsung Mesmerize. Yesterday I stumbled upon rooting when trying to figure out how to remove useless pre installed apps. All I really want is a slim & fast version & to be able to keep my navigation.
I've had experience with flashing; Xbox 360 & PSP's. So I kind of jumped into this and ended up bricking my phone. Or damn close.
From looking at the back of my phone it says Galaxy S, so I went in that section and downloaded this:
http://forum.xda-developers.com/showthread.php?t=940671
I did everything up to step 7, except it wouldnt boot past the splash screen.
So then came panic time...
I eventually reflashed with a new rom, This one to be exact:
http://forum.xda-developers.com/showthread.php?t=944671
My question is:
What have I really done now that I run on this rom?
I still cant uninstall preloaded software.
I would be willing to flash a new rom so I can have a faster phone.
But really no one makes it clear enough in there guides about how this process acctually works.
my best guess is after I flashed with that rom I will be able to upgrade?
Click to expand...
Click to collapse
OK, first of all, welcome. You've come to the right place to do several things. The first of which is to learn. Don't freak out. You're phone is in good hands here in this forum. Unless you really try hard, you can't do much to actually bork it up so bad that we can't fix it.
So, what you have done up to this point is update your phone to the leaked 2.2 firmware. It's not a ROM, it's actually the full firmware. If you want to remove bloat, the easiest way is to now install my EA11 Pick-n-Pack ROM, which already probably lighter than you want it. The good thing, is that it also has an addons pack that you can download to put anything back on that you want. Everything is there in easily flashable zip files. You just have to look inside if you don't see the actual name of something in particular. (ie. calendar is in SamsungandTouchWiz.zip) Now if you want faster with your new light weight ROM, go with the EA11 Voodoo kernel to help boost you up as well. This isn't a final build, as we don't have source code yet so understand this is just a small improvement on the stock kernel. Now, if you want to get all the way back to stock 2.1, might I suggest this thread to help with that. And for some help getting to know a little about everything, pop over to the irc channel in my signature and talk to anyone that happens to be there. We're here to help. If they don't answer, they've probably stepped away. Some of us hang out there and leave the computer idle while we're doing other things.
Again, welcome aboard. I hope some of that info helped you out.
first off...welcome...second if i would have done that i think i may have left a mess in my pants...but seems like you got it running good again plz trust me when i say listen to phidelt82, he will not give you any wrong advise...because of him and a few others, my phone kicks ass and im actually trying to learn how to make themes and roms (dont know much but learning), so yea...you came to the right place to make your phone truly your (with there software...lol)
Yoder808 said:
First off, consequences will never be the same...
You are now running a STOCK (leaked) 2.2 ROM, with a stock kernel and USCC App Bloat.
If you want a fast Android 2.2 with stock apps removed, do this:
1. Flash the EA11 + recovery via Odin, following the steps here.
2: Download the EA11 voodoo kernel found here and flash.
Voodoo is a name of the kernel which changes your EXT2 partition (old school) to EXT4 (new school), and makes your file system much faster.
Click to expand...
Click to collapse
First off thanks for the quick and acurate responses guys.
About what you said here though:
The "kernal" I loaded claims to be EA11 Stock, you are telling me I need EA11 voodoo Kernal, its called voodoo because its modified. -would this statement be correct?
Yoder808 said:
6: Optionally install the Pick and Pack ROM found here. (I WOULD!)
Click to expand...
Click to collapse
This would only be used for installing specific preloaded apps, correct?
phidelt82 said:
So, what you have done up to this point is update your phone to the leaked 2.2 firmware. It's not a ROM, it's actually the full firmware. If you want to remove bloat, the easiest way is to now install my EA11 Pick-n-Pack ROM, which already probably lighter than you want it.
Click to expand...
Click to collapse
So basically this is a light rom with the ability to add the removed pre-load apps?
phidelt82 said:
Now, if you want to get all the way back to stock 2.1, might I suggest this thread
Again, welcome aboard. I hope some of that info helped you out.
Click to expand...
Click to collapse
There most likely is no reason to go back to stock 2.1, correct? My shot in the dark is the reason you would want to is to not get usc on your back and larger selection of stable roms and kernels?
Thanks, you guys f***ing rock.
uselessmidget said:
First off thanks for the quick and acurate responses guys.
About what you said here though:
The "kernal" I loaded claims to be EA11 Stock, you are telling me I need EA11 voodoo Kernal, its called voodoo because its modified. -would this statement be correct?
This would only be used for installing specific preloaded apps, correct?
So basically this is a light rom with the ability to add the removed pre-load apps?
There most likely is no reason to go back to stock 2.1, correct? My shot in the dark is the reason you would want to is to not get usc on your back and larger selection of stable roms and kernels?
Thanks, you guys f***ing rock.
Click to expand...
Click to collapse
the voodoo kernel is modified with a lag fix. it will speed up your phone a bit. there is a program in the market called quadrant. run the full benchmark and you will get an idea of how your phone stacks up against others and will also give you a base score for your phone. if you do not have voodoo kernel installed your score will be around 800-900, after voodoo your score will be up around 1500.
the pick-n-pack rom lets you addon via the pnpaddons file, stuff you want on your phone prior to flashing. you pick what you want and flash it.
yes it is "a light rom with the ability to add the removed pre-load apps"
the leaked froyo and the voodoo kernel are very nice, i wouldn't go back to eclair 2.1 unless you needed to return the phone to uscc for whatever reason.
good luck and happy flashing.
Just an update guys, Thanks to phidelt82 I am now running 2.2 PnP w/ Voodoo Kernel.
The diffrence is night and day, used to get slow w/ a little lag every now and then. Now its always fast. Thanks again.
Special_opps said:
run the full benchmark and you will get an idea of how your phone stacks up against others and will also give you a base score for your phone. if you do not have voodoo kernel installed your score will be around 800-900, after voodoo your score will be up around 1500.
Click to expand...
Click to collapse
Sweet 1506 here.
and dont forget for roms you may flash... you can not UNINSTALL phone apps..... via the 'manage applications' menu.
you have to use a program like Root Explorer and physically DELETE them from the /system/app folder along with other folders they reside in.
only Cyanogen (i think) allows for uninstalling for actual phone programs.
v_lestat said:
and dont forget for roms you may flash... you can not UNINSTALL phone apps..... via the 'manage applications' menu.
you have to use a program like Root Explorer and physically DELETE them from the /system/app folder along with other folders they reside in.
only Cyanogen (i think) allows for uninstalling for actual phone programs.
Click to expand...
Click to collapse
You can also un-install stock apps with Titanium Backup.
Also, it seems like you're rushing into this a little bit.
Relax getting into the dev community is like getting into a slightly chilly pool, you need to ease in.
That said, welcome, and I look forward to seeing you around.
vluhd said:
You can also un-install stock apps with Titanium Backup.
Also, it seems like you're rushing into this a little bit.
Relax getting into the dev community is like getting into a slightly chilly pool, you need to ease in.
That said, welcome, and I look forward to seeing you around.
Click to expand...
Click to collapse
That's about the best words of wisdom I've heard... I think that should be posted in huge letters for every new person Registering to the site... And possibly it should flash across their screen until they're 10th post along with the other new Rules!!!
Oh and welcome aboard to OP!!! Hope you enjoy your NEW & Improved phone
Yoder808 said:
Voodoo is a name of the kernel which changes your EXT2 partition (old school) to EXT4 (new school), and makes your file system much faster.
Click to expand...
Click to collapse
It takes changes your partitions from RFS to EXT4.
elijahblake said:
That's about the best words of wisdom I've heard... I think that should be posted in huge letters for every new person Registering to the site... And possibly it should flash across their screen until they're 10th post along with the other new Rules!!!
Oh and welcome aboard to OP!!! Hope you enjoy your NEW & Improved phone
Click to expand...
Click to collapse
What we should do is edit the top of the post for "Getting your phone back to stock" to say "Don't Panic" in huge blue letters. lol
Yoder808 said:
First off, consequences will never be the same...
You are now running a STOCK (leaked) 2.2 ROM, with a stock kernel and USCC App Bloat.
If you want a fast Android 2.2 with stock apps removed, do this:
1. Flash the EA11 + recovery via Odin, following the steps here.
2: Download the EA11 voodoo kernel found here and flash.
3: Boot into recovery and run update.zip (this will push you to a red clockwork recovery)
HINT: If you aren't familiar with clockwork recovery, the controls are slightly different. You use still use the volume buttons to navigate, but the power button is now used to execute selections and the search softkey to go back.
4: select install .zip from sdcard
5: select the voodoo .zip and confirm
This will install the new kernel and replace your recovery (which used to require booting into the Samsung recovery before making your way to the clockwork recovery by installing update.zip from sdcard) with a clockwork recovery that will look identical to the one you had after running update.zip, but can enable your newly acquired lagfix.
6: enable voodoo lagfix, and rejoice!
6: Optionally install the Pick and Pack ROM found here. (I WOULD!)
(Credits to MesmerizeUser for these steps, I copypasta'd and edited.)
Good luck with your back-tracing! Let us know if any steps are unclear.
Also, the payed version of Titanium Backup will let you "freeze" stock apps, so they don't appear in your menus, and they won't run, but you can "thaw" them whenever you like.
PS - FROYO EA11 is a leaked Android 2.2 ROM for the Mesmerize. Google names Android releases after deserts, like Donut, Eclair, Froyo, Gingerbread, Honeycomb, etc.
Voodoo is a name of the kernel which changes your EXT2 partition (old school) to EXT4 (new school), and makes your file system much faster.
Click to expand...
Click to collapse
Not to bust your balls but its really rfs not ext2. Ext 2 is faster than ext 4 actually.
Sent from my SCH-I500 using XDA App
Thanks for the help, opinions, arguments over file systems. Good stuff.
Btw is battery life a problem for anyone else? Luckly I have charging availible most of the time. I work as a production manager and starting at 7 by 8:00 the phone is at 89%
no programs running according to task manager, ram cleared, about 4 5mins calls
uselessmidget said:
Thanks for the help, opinions, arguments over file systems. Good stuff.
Btw is battery life a problem for anyone else? Luckly I have charging availible most of the time. I work as a production manager and starting at 7 by 8:00 the phone is at 89%
no programs running according to task manager, ram cleared, about 4 5mins calls
Click to expand...
Click to collapse
Some people have had battery issues with 2.2, some haven't.
I personally did, so I flashed back to 2.1
dcow90 said:
It takes changes your partitions from RFS to EXT4.
Click to expand...
Click to collapse
Correction noted!

Really messed up G2X

Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3
beast6228 said:
Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3
Click to expand...
Click to collapse
You are probably going to have use Xboarders ROM then flash the unroot.zip he has in this thread http://forum.xda-developers.com/showthread.php?t=1158513.
See if that works to get you back to 2.3.3 completely stock.
It says that because it checks the baseband to see how recent it was, that's why it thinks you're on v21e.
As of now, there's no way to flash back to the old baseband, since people don't include the baseband in their ROMs, as that can cause a whole host of problems. The solution is to do exactly what tidewaterns said, that just gives you a little extra background info.
I am going to give this a try and see what happens, I will post results.
Well I tried the slimmed down version of Xboarders's rom and it seems to be working well so far. I originally installed his Stock OTA rom and that's when I started having problems. Oh well. thanks guys for all the help.
Crash course about root and roms: Superoneclick roots the rom you have in place. Flashing xboarders rom didn't "give you root" for the other roms you flashed, it is simply one rom out of many that is pre-rooted by the dev who packaged it up. When you flash it you have a rom that is rooted. If you had flashed CM7 (another rom that provides root access to its system files) then you'd have had a different rom that was pre-rooted by its dev.
Are you catching what I'm saying? Flashing xboarders rom didn't "give you root" any more than CM7 "gave you root." Root is built in to those roms.
If you want to restore to an unrooted stock rom browse the threads in the development section. There are a couple of stock nandroid backups posted that you can restore via clockworkmod recovery and then you'll have a stock unrooted rom. You can even do that and still have clockworkmod recovery in case you want to flash a different rom to your phone again.
And PLEASE remember when flashing from one rom to a different rom, WIPE WIPE WIPE data, cache, dalvik cache, then flash rom, then fix permissions, then reboot. This will save you SO MANY headaches.
G2X CM7
I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.
beast6228 said:
I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.
Click to expand...
Click to collapse
Sweet! If you're simply updating to a newer version of the same rom you can probably get away with just wiping cache and dalvik cache and then flashing. Its just when you switch to a totally different rom that you need to do a full wipe. Gives you a clean slate to start with.
G2X CM7
I'm curious about one thing though. What would I accomplish by using Nandroid and flashing a bin? I see there is a BIN_LGP999AT-01-V10f-310-260-MAR-27-2011+0.zip file that is available for this phone, although I have no clue on how to install Nandroid. Anyways, wouldn't flashing a BIN be the ultimate way to restore the G2X?

Voodoo Lagfix and others after GB Update?

Okay ... So I am about to update to the latest pushed version. Am rolling back to EE4 now and have the update.zip on my card. What about CWM? Does my current version I've been using with my Gummy Charged 2.1 work with it? I have the Imosyn (sp) kernel on my card that I will apply after the update to 2.3.6 for root, as I understand it.
Are there any Gummy's or anything that are going to work after the 'official' update?
You don't use CWM with the update. You use stock recovery.
Gummy is EP1W. If you install it over the OTA, you'll bring yourself right back down to EP1, and the update will be pointless. You can get lagfix by running imoseyon kernel. It's EP4. It's slightly older EP4, but I haven't had any issues.
shrike1978 said:
You don't use CWM with the update. You use stock recovery.
Gummy is EP1W. If you install it over the OTA, you'll bring yourself right back down to EP1, and the update will be pointless. You can get lagfix by running imoseyon kernel. It's EP4. It's slightly older EP4, but I haven't had any issues.
Click to expand...
Click to collapse
Thank you sir! Phone is updating now. I will apply the imoseyon kernel after it's done. Lagfix is the main thing anyhow, I can nuke the bloatness with my Titanium.
now I'm confused .... I no longer have CWM recovery. How am I to apply the imoseyon kernel via stock recovery? Can I just rename it as update.zip?
By taking it back to stock EE4 and installing the update, one of the things it did was restore the default recovery environment.
Go back into ODIN and install CWM, don't use Auto-Reboot. When it's done flashing, turn the phone off and hold the button combinations to start the phone into CWM. Flash iMoseyOn's kernel and you're done at that point.
trparky said:
By taking it back to stock EE4 and installing the update, one of the things it did was restore the default recovery environment.
Go back into ODIN and install CWM, don't use Auto-Reboot. When it's done flashing, turn the phone off and hold the button combinations to start the phone into CWM. Flash iMoseyOn's kernel and you're done at that point.
Click to expand...
Click to collapse
Ahhhh.... it's @ the Sammy screen and she's talking to me! Looks like all is good while it re-writes the allocation tables. Thanx again, appreciate the heck out of the help.
hmmm .... I guess all is not well ... I installed the kernel but I don't have root. I installed superuser from the market and then Titanium and when opening Titanium I have no root .... what next?
Chopstix9 said:
hmmm .... I guess all is not well ... I installed the kernel but I don't have root. I installed superuser from the market and then Titanium and when opening Titanium I have no root .... what next?
Click to expand...
Click to collapse
You SHOULD have root since the kernel is your root method. Have you tried restarting?
Sent from my SCH-I510 using xda premium
Yeah I sure have. The kernel I used is imoseyon_kernel_charge_gb_4.0.0 ... not rooted .... guess I need to drop five yards and punt (do it all over)
Edit: The one thing I did not do prior to rolling back to EE4 was to do the big 3 wipe of data/cache/etc ..... maybe that's the problem?
Chopstix9 said:
Yeah I sure have. The kernel I used is imoseyon_kernel_charge_gb_4.0.0 ... not rooted .... guess I need to drop five yards and punt (do it all over)
Edit: The one thing I did not do prior to rolling back to EE4 was to do the big 3 wipe of data/cache/etc ..... maybe that's the problem?
Click to expand...
Click to collapse
Try installing Superuser from the Market? imosyeon kernel should have installed binary and apk, but maybe it missed part of it. If all else fails, flash the superuser zip from CWM.
http://www.toms-world.org/android/download/http/Superuser-3.0.7-efgh-signed.zip
Yes, I had installed SU from the market and didn't have root. I had an SU zip saved on my desktop .... su-2.3.6.3-efgh-signed .... I put that on the sd and installed it and I am rooted !!
Thanx Again
I love Lagfix and Voodoo Sound, but I'm currently running the stock kernel. I read in other forum discussion that Samsung designs their kernels to work with their OS revisions. People have said they're getting the best performance with the stock kernel.
Until IMoseyOn releases a new kernel based on the EP4D source that was released, I'm going to stick with stock.
Just some food for thought.
KarateExplosion6 said:
I love Lagfix and Voodoo Sound, but I'm currently running the stock kernel. I read in other forum discussion that Samsung designs their kernels to work with their OS revisions. People have said they're getting the best performance with the stock kernel.
Until IMoseyOn releases a new kernel based on the EP4D source that was released, I'm going to stick with stock.
Just some food for thought.
Click to expand...
Click to collapse
My concern was updating to 2.3.6 and having root. (on the road all day and need wireless tethering so outlook is open on laptop) Using the tad older imoseyon kernel gave me that, plus lagfix, which I have liked since this phone hit the market. I'm good for now, I can always update when the latest and greatest comes out.
Chopstix9 said:
My concern was updating to 2.3.6 and having root. (on the road all day and need wireless tethering so outlook is open on laptop) Using the tad older imoseyon kernel gave me that, plus lagfix, which I have liked since this phone hit the market. I'm good for now, I can always update when the latest and greatest comes out.
Click to expand...
Click to collapse
I have root on the stock kernel bro. Did a clean EE4 install, skipped as much set up as possible, ran update.zip in stock recovery, ODIN flashed imnuts' latest CWM recovery with auto-reboot disabled, booted directly into CWM recovery, flashed the latest SU zip, then ran setup as normal. Boom! Root.
Completely clean install, latest OS and kernel, root, plus tether works and everything.
Right now I'm just waiting on imnuts' TW4 theme to launch (he's estimating Sunday). Hopefully I can install that theme over a debloated and deodexed version of the latest OTA. It won't be long before IMoseyOn releases a kernel built from source that enables Lagfix. That's really all I'm missing, since Voodoo Control lets me load most of Voodoo Sound on top of the stock kernel.
What I'm REALLY looking forward to is an release of Liberty for the Charge or something AOSP if we ever get the 4G RIL sorted out... This things will take considerable time though.
It just doesn't matter ... In all honesty I liked the feel of the Gummy GBE 2.1 better than this stock ginger ... but again, it just doesn't matter to me. Functionality is all I care about, it's only a damn phone !!!
I loaded up the debloated/deodexed/rooted all-in one package danalo posted in development, flashed perfectly and after a wipe in CWM on first boot seems to be running fine except for the poop
sent from my Acer Iconia A500 beast of a tablet via XDA app
KarateExplosion6 said:
I have root on the stock kernel bro. Did a clean EE4 install, skipped as much set up as possible, ran update.zip in stock recovery, ODIN flashed imnuts' latest CWM recovery with auto-reboot disabled, booted directly into CWM recovery, flashed the latest SU zip, then ran setup as normal. Boom! Root.
Completely clean install, latest OS and kernel, root, plus tether works and everything.
Right now I'm just waiting on imnuts' TW4 theme to launch (he's estimating Sunday). Hopefully I can install that theme over a debloated and deodexed version of the latest OTA. It won't be long before IMoseyOn releases a kernel built from source that enables Lagfix. That's really all I'm missing, since Voodoo Control lets me load most of Voodoo Sound on top of the stock kernel.
What I'm REALLY looking forward to is an release of Liberty for the Charge or something AOSP if we ever get the 4G RIL sorted out... This things will take considerable time though.
Click to expand...
Click to collapse
Care to make a thread of what you done? Files used? I want to re-root my Charge, but want to keep the latest ota update and radios. Main question is the "update.zip" file?
iMoseyOn has stated that he's not going to be developing kernels anymore due to him having to turn in all of his phones to his old employer. He's taken up a new job and because of that he has to return his phones, including the Droid Charge.
trparky said:
iMoseyOn has stated that he's not going to be developing kernels anymore due to him having to turn in all of his phones to his old employer. He's taken up a new job and because of that he has to return his phones, including the Droid Charge.
Click to expand...
Click to collapse
Yeah, I read last night. Awful news. I hope someone can just get us full Voodoo and EXT4 support. I don't absolutely need OC/UV, but it'd be nice...
In other bad news, imnuts is getting a Galaxy Nexus and only pledging support for the Charge for "a few more months."
Let's hope JT and the gang can get this RIL figured out, so we can at least have Team Douche to continue development with CM 7.2 and CM 9...
Sent from my SCH-I510 using xda premium
Damn. And I thought it couldn't get any worse with iMoseyOn leaving. And now we have imnuts leaving too? It just went from bad to worse in a matter of 48 hours!
Guess I better get used to just using the stock kernel.

New here, E4GT Need some help

Hey guys, ok so I am coming from two HTC Heros (CMDA Sprint)
Was running cyanogenmod on both (me and the wife) loved it.
Now that I have the E4GT, I went ahead last week and used ODIN to install LoStKernel.
Now it did give me root and I have used apps like rom toolbox and setcpu.
My main problem is it seems these samsung devices are a lot trickier to tinker with.
Basically I am looking to get Clockworkmod so I can flash roms and make nandroid backups.
From what I have read, I need a kernel that supports and/or has CWM in it.
I tried flashing CWM with rom manager, and it installed - but I have no option to backup/restore I can only flash a zip or clear cache.
There are SO MANY things posted in the development section and I do not know which kernels are the latest, best etc.
I need:
a) CWM/busybox
b) overclocking support
c) FULL stock functionality (no loss of wifi or something stupid like that)
From what I am understanding the kernel is included with a rom. But I can't flash a rom without CWM. So I am rooted but stuck with stock rom and it's kernel.
Confused, lol!
Can someone point me to a proper thread to get me CWM and a well supported ROM to install? Can I get CWM working fully on the stock kernel/rom?
If someone can point me to the right direction, maybe I can find a developer to donate to lol!
No love?
At this point I'm just trying to get cwm. Seems I may have already had it just didn't know it came with lostkernel and now I botched it using rom manager.
Sent from my SPH-D710 using XDA App
You can actually flash a new kernel with CWM in odin
Thats the easiest method
There are several, as for the best I dont know yet
Im still tinkering with my setup
I guess that's my main issue - I can't find one that has CWM, everything I am seeing is a ROM that needs CWM to install.
If I had CWM I'd be all set because then I can backup my setup and try new things without worry, but I don't want to use ODIN to try a kernel that CWM won't take, or isn't there, and then lose what I have ya know?
All set, seems I flashed a kernel that wasn't what it was supposed to be. I apparently flashed his earlier version (pre-LoStKernel) that did not have CWM5 it it.
Just used ODIN last night to drop in LoStKernel and kept root, but also have CWM5 now. After clearing my SD Card, made my first backup. 1.5GB, jesus! lol. Nearly my whole SD card... yes, it's from my old Hero, so, time to get a 32GB.

[Q] Planning to root and put a custom rom on a friends phone

Hi there, my friend is coming round soon and I was planning to give it a custom rom
Now, I've done this type of stuff before (on my nexus) I just want to see how you would do it for this samsung phone
Now, what recoveries can you get? I use 4EXT on mine
And, can anybody send me to a stable and up-to-date rom that can be used everyday and has nearly no issues? I need one without all the samsung stuff, just a normal default android one
And, how would I go by rooting the phone?
On mine, I used the zergrush exploit, does it work for this phone??
If you want one with everything working, then use the Froyo roms. CM7 is under development. The major bugs are bluetooth and youtube hq. Leaving that, even thats useable. It's even better than Froyo.
I suggest you to try either Kyorarom or Kyrillos v9.6. Both of them are froyo based, pre-rooted, and have other mods to make it even more faster than a stock one.
Happy flashing!
ak700 said:
If you want one with everything working, then use the Froyo roms. CM7 is under development. The major bugs are bluetooth and youtube hq. Leaving that, even thats useable. It's even better than Froyo.
I suggest you to try either Kyorarom or Kyrillos v9.6. Both of them are froyo based, pre-rooted, and have other mods to make it even more faster than a stock one.
Happy flashing!
Click to expand...
Click to collapse
Thanks, and how do I go about flashing the rom, would I have to root it first?
No need.
This is something to good to read http://forum.xda-developers.com/showthread.php?t=1372414
BTW to root the phone use super one click root (or sth like that )
Ah, I get it now, thanks
Just one more question, does ODIN delete the phones data before installing the rom?
You have to wipe all your data after flashing(or not if from Froyo to Froyo)
I mean from recovery. ODIN don't delete user data
I exactly I don't know the working of odin, but after flashing you are directly taken to the recovery and advised to wipe data and factory reset.

Categories

Resources