Really messed up G2X - T-Mobile LG G2x

Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3

beast6228 said:
Well I ordered a G2X the other day and finally I received it. It came with Gingerbread 2.3.3 from the factory. (worked flawlessly) Keep reading.
After a couple days I wanted to try out CM7 on it. So, I rooted the phone by using NVflash and doing all that good stuff, then I flashed the phone with (Gingerbread OTA 2.3.3 Rooted flashable zip v1.0.0) I couldn't get root with SuperOneClick so that was my only option. Well I got root and that's when the fun started.
I installed CM7 on it, seemed to run fine, looked fine. But simple me, I wanted to go back to Plane jane 2.3.3 So, I did all the usual stuff (backing up, wiping data, formatting caches), then I ran OneClickRecoveryFlasher...and restored the phone with LG-P999-V10f.zip (supposedly a stock flash for 2.2.2)
well it all seemed to work fine apon finishing. It booted fine, ran ok. However now I have some really bad problems. The major one is that my wifi doesn't work worth a damn now, the connection is highly intermittent. I can't use the market to download apps because it dies out often, along with anything else network related. (browsing works 5% of the time) You catch my drift. My other android phones have no trouble with anything. Now here where it gets weird, I supposedly restored my phone back to stock. However, the phone reports a proper android version 2.2.2 which is what I flashed it to. However it shows kernel 2.6.32.9 Baseband is July 15th 2011. When I use LG's phone update tool it says I am running V21E which is Gingerbread 2.3.3 ...but that's not true because it is actually 2.2.2
I have no clue what to do, I am stuck. I just want to either have a stock G2X running either 2.2.2 or 2.3.3
Click to expand...
Click to collapse
You are probably going to have use Xboarders ROM then flash the unroot.zip he has in this thread http://forum.xda-developers.com/showthread.php?t=1158513.
See if that works to get you back to 2.3.3 completely stock.

It says that because it checks the baseband to see how recent it was, that's why it thinks you're on v21e.
As of now, there's no way to flash back to the old baseband, since people don't include the baseband in their ROMs, as that can cause a whole host of problems. The solution is to do exactly what tidewaterns said, that just gives you a little extra background info.

I am going to give this a try and see what happens, I will post results.

Well I tried the slimmed down version of Xboarders's rom and it seems to be working well so far. I originally installed his Stock OTA rom and that's when I started having problems. Oh well. thanks guys for all the help.

Crash course about root and roms: Superoneclick roots the rom you have in place. Flashing xboarders rom didn't "give you root" for the other roms you flashed, it is simply one rom out of many that is pre-rooted by the dev who packaged it up. When you flash it you have a rom that is rooted. If you had flashed CM7 (another rom that provides root access to its system files) then you'd have had a different rom that was pre-rooted by its dev.
Are you catching what I'm saying? Flashing xboarders rom didn't "give you root" any more than CM7 "gave you root." Root is built in to those roms.
If you want to restore to an unrooted stock rom browse the threads in the development section. There are a couple of stock nandroid backups posted that you can restore via clockworkmod recovery and then you'll have a stock unrooted rom. You can even do that and still have clockworkmod recovery in case you want to flash a different rom to your phone again.
And PLEASE remember when flashing from one rom to a different rom, WIPE WIPE WIPE data, cache, dalvik cache, then flash rom, then fix permissions, then reboot. This will save you SO MANY headaches.
G2X CM7

I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.

beast6228 said:
I learned something new Thanks for the info. And yes, this last time when I installed, I wiped and formatted just about everything I could possibly do, including fix permissions..seemed to do the trick.
Click to expand...
Click to collapse
Sweet! If you're simply updating to a newer version of the same rom you can probably get away with just wiping cache and dalvik cache and then flashing. Its just when you switch to a totally different rom that you need to do a full wipe. Gives you a clean slate to start with.
G2X CM7

I'm curious about one thing though. What would I accomplish by using Nandroid and flashing a bin? I see there is a BIN_LGP999AT-01-V10f-310-260-MAR-27-2011+0.zip file that is available for this phone, although I have no clue on how to install Nandroid. Anyways, wouldn't flashing a BIN be the ultimate way to restore the G2X?

Related

[Q] CM7 Root Fail

I am having some phone problems as a result of a root attempt.
Phone : LG p999
Carrier : Wind (Canada)
Here's what I did:
1. Tried superoneclick root program. It never got to completion and I couldn't figure out why. It always failed at right before finishing, even after reboots.
2. After superoneclick , I decided I would edit the adb shell manually. I did not initialize psneuter because that step was successful with Superoneclick. I loaded the superuser package. After this, I couldn't get the phone to boot, even in recovery mode.
3. Next I used One-Click ClockworkMod Recovery NvFlasher to load clockworkmod (cwm) . At first I loaded it onto internal SD. This worked fine but I couldn't get it to recognize any backups or cm7 nightlies.
4. Then I tried loading on the external SD. This worked, I couldn't see any backups but could load cm7 nightly and gapps.
5. Rebooted phone, everything fine. But within a few hours, my 3g was not working. I typed #*#*4636*#*# and saw the 3g settings were empty. Apn settings are normal though.
So here is where I'm at now. Wifi, SMS, calling all work. Cannot access 3G, sdcard (can’t take pictures).
Also, I didn't make a backup. Yea, that was stupid.
first thing were you on 2.2.2 or 2.3.3 when you first tried superoneclick? It sounds like you did the update and were on 2.3.3. The superoneclick methode does not work for rooting anymore. You have to nvflash CWM first. Then flash xboarders stock ota rooted or any Rom that is pre rooted I think will work.
So what I would do at this point is try using nvflash and flash back to stock and start over. You will probally have to reinstall CWM then I would just use the xboarders stock rooted ROM just to gain root then install CM7. You probally dont have to flash xboarders first but that is the way I know will definitly work so that is what I recomend. Also I dont know if the NVflash returns the phone to stock 2.2.2 or 2.3.3 I have never done it. maybe someone else who knows more could chime in.
Charlie
Are you already on Cyanogen Mod 7 as your title indicates? CM7 is rooted OOTB. There is no reason to try and root it again.
Yes it is running CM7 now, but with some serious problems:
1. Can't use one click to flash stock ROM -- each time I try the phone gets stuck in a rebooting loop and just eventually freezes.
2. 3G/sdcard problems with CM7
- not sure if this is just an issue with the CM7 build or whether my phone is causing this.
I have flashed CM7, but the weird thing is that the 3G works fine for about a day and then it cuts out. Its not an APN thing --> I checked the settings. Any ideas what is going on there?
Gonna try loading xboarders when I have a free evening.
Thanks

ICS frustrations - rant

I have come to the conclusion that something is wrong with my phone. I have tried to install ICS....a lot. I am not exagerating when I say that I have tried every Odin install, and every ICS ROM that has more than a few positive results. Nothing will work. I am not new to flashing, I have had a Captivate, Inspire, Tab and have had no issues with those, even created a few themes and build.prop tweaks. I know what I am doing and I follow the OP instructions perfectly. The damn thing just wont take. I get the white Samsung screen, a black screen, a vibration, and a reboot. So at this point I think I am just going to stick with GB for right now and hope that either the offcial ICS update works (when available) or maybe 5.0 later this year.
Two weeks of try to make this work has run me ragged. Outside of the ICS issues though this is by far the best device I have had in terms of performance and reliablility.
Rant over.
Did u flash the uclc5 radio at any point in time?
If not what radio did u install, and did u install it before u flashed ics rom?
What recovery were u using?
Did u odin back stock in between each ics attempt? Did u use dark side wipe at all?
*#* Google dropbox, its useful.
https://www.dropbox.com/referrals/NTcwNDE0ODUyOQ *#*
icenight89 said:
Did u flash the uclc5 radio at any point in time?
If not what radio did u install, and did u install it before u flashed ics rom?
What recovery were u using?
Did u odin back stock in between each ics attempt? Did u use dark side wipe at all?
*#* Google dropbox, its useful.
https://www.dropbox.com/referrals/NTcwNDE0ODUyOQ *#*
Click to expand...
Click to collapse
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
lacer4576 said:
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
Click to expand...
Click to collapse
Personally, I haven't had anything but trouble with superdarkside. Its an excellent tool, but for me, hasn't meshed well with ICS. You should try following seans op for Sky ICS UCLC4, without using darkside at all to change from where your at now.
Also, the modem (aside from UCLC5 for some) has no effect on the installs, I sat on Sky ICS UCLC4 with the UCLC3 modem for a couple weeks without any issues at all.
I have tried all of the CWM mods posted here, and to be honest, my favorite is the CWM touch when installed from rommanager. Seans roms seem to take better with it more than the rest. The CWM touch that is posted on the sky UCLC4 OP is good, but it has a couple minor bugs.
Are you using SuperSU or superuser? Supersu has backfired on numerous occasions for me, I always stick to superuser (and I'm sure I'll be flamed for the comment. Every skyrocket reacts differently, remember)
mahausrath said:
Personally, I haven't had anything but trouble with superdarkside. Its an excellent tool, but for me, hasn't meshed well with ICS. You should try following seans op for Sky ICS UCLC4, without using darkside at all to change from where your at now.
Also, the modem (aside from UCLC5 for some) has no effect on the installs, I sat on Sky ICS UCLC4 with the UCLC3 modem for a couple weeks without any issues at all.
I have tried all of the CWM mods posted here, and to be honest, my favorite is the CWM touch when installed from rommanager. Seans roms seem to take better with it more than the rest. The CWM touch that is posted on the sky UCLC4 OP is good, but it has a couple minor bugs.
Are you using SuperSU or superuser? Supersu has backfired on numerous occasions for me, I always stick to superuser (and I'm sure I'll be flamed for the comment. Every skyrocket reacts differently, remember)
Click to expand...
Click to collapse
I will give it a shot. I would really like to get back to ICS, I got so used to it on my other phones.
I have been using superuser, haven't had a problem yet from that.
lacer4576 said:
I have not tried the uclc5 radio. I saw a bunch of posts about it being for the Note, however the ROMs I was looking at all used ucld2 and ucla4 radios, so that is what I have been trying. Even the ROMs with the radio included as part of the install didn't work. And yes, I installed the radios (when applicable) before attempting the ROM install.
Recovery is the same, most ROMs suggested a particular recovery and I attempted using the suggestion in each OP, then attempted with the newest recovery when they didn't work, so I bascially did each ROM I tried twice. I did flash back to stock before each attempt.
I do have the dark side wipe and ran it before every attempt, then followed the OP instructions to perform the normal wipe\format and dalvik wipes when directed.
What kills me is that I get the same bootloop when trying an Odin ICS. The only version of that I have not tried is the version that was extracted from the oneclick.
I even had problems getting a GB ROM to install. I did manage to get superlite 3.1 installed after several attempts. You better believe I have nandroid backups of this working install....in several places.
My other concern is that even when the official update gets pushed out that I won't be able to install that either.
I appreciate your suggestion to use uclc5 radio. If I try to install that I suppose I need to try and flash a ROM that does not come with a radio as part of the package?
Click to expand...
Click to collapse
I know this may be silly but have you tried to re-download the one click leak your using? Maybe you have a bad download or a corrupt file. And, or try to use a different usb port when you flash. It seems you've tried everything and maybe you have a defective device. I started having a lot of issues recently after going from ROM to ROM so I just flashed the one-click to get back to a clean state and then carefully chose which ROM I wanted to use and carefully install it. I've always used Darkside Superwipe but since I've quit using it, things have been much smoother. What I do now is what most Devs are saying now is to wipe/factory reset multiple times and format/system multiple times. If thats not working maybe go all the way back to stock GB with k0nanes stock tar and go from there. As far as the uclc5 radio, be careful!! I'm sure you've read that it can corrupt a partition and cause issues. I did flash it once and it did work for 48 hours but I noticed signal loss so I flashed back to uclc2. Maybe I got lucky it didn't mess me up, who knows? And if you have an issue not receiving an official update, IF you do go back to the stock GB tar, do a nandroid and flash that when it comes out. Just make sure you flash the stock recovery before you take it. I have a stock GB backup on my SD, so IF and WHEN it does come out, I'll just flash the backup, flash stock recovery and take the OTA. With your constant bootloops, it seems to me its a bad download or a defective device. It seems you've tried everything. Good luck...
^^^ this makes sense. Also I was asking about the note radio to advise u against it, or u may end up screwing up ur phone even worse, and have to make a visit to my corrupt efs fix thread lol.
hcyplr29 said:
I know this may be silly but have you tried to re-download the one click leak your using? Maybe you have a bad download or a corrupt file. And, or try to use a different usb port when you flash. It seems you've tried everything and maybe you have a defective device. I started having a lot of issues recently after going from ROM to ROM so I just flashed the one-click to get back to a clean state and then carefully chose which ROM I wanted to use and carefully install it. I've always used Darkside Superwipe but since I've quit using it, things have been much smoother. What I do now is what most Devs are saying now is to wipe/factory reset multiple times and format/system multiple times. If thats not working maybe go all the way back to stock GB with k0nanes stock tar and go from there. As far as the uclc5 radio, be careful!! I'm sure you've read that it can corrupt a partition and cause issues. I did flash it once and it did work for 48 hours but I noticed signal loss so I flashed back to uclc2. Maybe I got lucky it didn't mess me up, who knows? And if you have an issue not receiving an official update, IF you do go back to the stock GB tar, do a nandroid and flash that when it comes out. Just make sure you flash the stock recovery before you take it. I have a stock GB backup on my SD, so IF and WHEN it does come out, I'll just flash the backup, flash stock recovery and take the OTA. With your constant bootloops, it seems to me its a bad download or a defective device. It seems you've tried everything. Good luck...
Click to expand...
Click to collapse
I will try to get a different download, but I do not think that is it. The only reason I say that is because my phone had the exact same response for EVERY ROM I have download. They can't all be bad files. I have tried on two different PCs with three different USB cables. Good thought though, I have had bad downloads before. I am going to keep trying as the ROMs are updated and hope that I figure out what is going on, and hope that I can get the official update at some point. Then I will just root it and get rid of the bloat myself if I have to
I am going to stay away from the L5 radio, not worth the hassle.
On a side note, if installing a rom from the site, remember, most will work with the "base"
But need to reset/full boot before "updating".. dont just flash rom and flash update then reboot
I had a hard time with ICS as well with different problems, all I can say is it disproves the definition of insanity. Trying the same things over and over again will eventually make it work!
Hang in there, it's worth it. Whenever you do get the ODIN one click to work I highly recommend flashing Raider03's SMOOTHIE ROM. Awesome battery life and extremely "SMOOTH"! But be prepared for a few FCs and bugs with all of the ICS ROMS for now!

Upgrade to FP1 question (any issues with this method?)

Inherited a Droid Charge running GummyCharged 2.1 from my housemate.
I want to switch to Eclipse 2.0. I know in order to run FP1 builds, you need to run stock kernel if you want wifi. Except, I also noticed that the PBJ kernel recently fixed the wifi issue.
I'm under the impression you're told to revert to stock, run OTA update, then flash your FP1 ROM so you have the latest stock kernel.
Or is there more to it than the kernel?
I'd rather skip the revert/flash/etc/etc, I updated to the latest CWM, made a backup, factory restored, wiped cache/dalvik, flashed ROM, flashed kernel, rebooted, everything seems fine (wifi working no issues). But... that doesn't mean that it is.
EDIT: Yeah, my baseband in About Phone shows i510.06 V.EE4 SCH-I510.EE1, which is what it was before. Can I get just the baseband?
Thanks!
By the way, I don't care about carrier signal at all, this phone got wet and no longer accepts SIM cards. The other functions still work, so I'm using it on wifi and I'm trying to re-purpose the device to be a portable offline GPS for hiking. But I did read that FP1 gets better GPS locks, which is part of why I want to run it.
U cant get the fp1 upgrade on a cstom rom. U have to go back to stock n get the ota upgrade. I suggest usin titanium to back up ur stuff then flash what u want. Stock fp1 or pjb 5/24 r both good, but u gta get back to factory first.
Sent from my SCH-I510 using XDA
Actually, I figured "what you do do well" and I decided to follow the suggested directions. I used ODIN, restored to stock EP4... and couldn't get past the main screen. Can't read SIM cards, so can't get past the activate screen. I then flashed back an FP1 rom, the latest PBJ kernel, and [attempted] to use the EP4 to FP1 patch, which hung and failed.
It looks like if I want to get my baseband to FP1, I'll have to jump through hoops (maybe flashing a stock EP4 pre-rooted ROM from ODIN? maybe?) Regardless, since the CDMA antenna in this thing is useless anyway, I'm just gonna skip it.
Thank you for your reply!
Well, now that you have borked your phone a bit, go and download the EP4 ODIN package and flash it (in ODIN or SamsungPST). Might not be a bad idea to flash the PIT while you're at it. You'll probably have to flash CWM, and then PBJ from within CWM (stock kernel overwrites it) Then go and try flashing your ROM of choice again (cough *tweaked* cough), either in ODIN (with the respective package) or CWM. (again with the proper package).
http://www.imnuts.org/odin-packages/
Sent from my SCH-I510 using xda premium
thanks kvswim, that's pretty much exactly what I did yesterday. I'm even running Tweaked 2.1
It's too bad, I really prefer the theme of Eclipse, but I just couldn't handle the lack of TSM Parts.

So Rusty - Need Help.

It has been FOREVER since I have messed with my G2x. But lately it has been super laggy, the keyboard never picks up what key I pressed properly, and the accelerometer is a MESS.
Im currently on March 2011 baseband, Android Version 2.3.7, and a very, very old nightly.
Im looking to update to the newest baseband as I hear it is a huge improvement, and also try out an ICS rom. I have been browsing and reading up, but am so rusty on reverting and flashing.
Would the proper, easy way to do this be as follows:? This is what I've gathered from reading, just don't want to brick my phone for a stupid reason.
1)Flash a stock ROM - Full Factory Wipe
2)Update baseband with LG Update Tool
3)Root Phone again
4)Flash Custom ROM?
Also, can you revert to stock ROM without an external SD card? I was reading a few topics stating you can't. I also have a backup of the original stock ROM(or at least I think) from a very, very long time ago. Can I just restore that?
I apologize in advance for all the questions, just trying to refresh my memory on this entire process.
from what ive seen, after getting cwm on your phone via nv flash you install one of the ics roms then before rebooting the phone you have to install a fix via cwm that owain has on one of rom pages (domination i think) then you are good to go. and yes, you have to use an external sd card for all of this.
After updating baseband you will lose root as well as CWM. You need to put it back on before you can flash a custom rom on it.
cricketAC said:
After updating baseband you will lose root as well as CWM. You need to put it back on before you can flash a custom rom on it.
Click to expand...
Click to collapse
Ahh thank you! And I can not run the tool from a custom rom, correct? I have to flash back to stock, and then the updater will update baseband as well as unroot everything.
I also dont have an external SD card, so I guess I will be buying one to flash back to stock

[Q] Would Samsung fix my bricked phone?

I bricked my unlocked Captivate (bought on Amazon for $240 - I was avoiding a data plan) trying to get Ice Cream Sandwich on it. The phone was rooted.
Initially, the phone was only loading a Samsung splash screen when I tried to get it into normal mode. However, recovery mode was working; it would boot into Clockworkmod. Which is a bad thing considering they would easily tell I had messed with it!
So, I loaded the phone into Download mode and tried to flash the stock ROM using Odin. Odin said "failed" and now my phone was completely soft bricked, and the infamous "[phone]-----/!\-----[computer]" screen was showing up. Download mode worked though. I tried to flash all types of stock and custom ROMs to no avail. Now, recovery and normal modes don't work while Download mode does.
So, I called Samsung and told them it wasn't working; they told me it was still under warranty and I could send it in for repairs.
My question would be: will Samsung repair my phone, or will they find out I messed with it and refuse to do so? Also, if they find out, how much will I have to pay them to fix it?
Getting a new phone is out of the question... I might just buy
If there is an odin flash counter on download mode, they will figure it out if you have messed with it. If there's not, make a good story. Was it on 2.3.6 already when you bought it?
If you can get into download your not bricked. The screen you see is kernel panic. You will have to flash a proper kernel to get it to boot back up.
Sent for a corner cell in Arkham
Yeah, you can still fix it. No need it to bring to samsung
Has anyone sent a bricked phone in to Samsung before?
I tried flashing stock Captivate Gingerbread kernels to no avail. I googled and googled, and I tried everything I found. Including Odin and heimdall.
It was running Gingerbread 2.3.5 when I updated it myself to Ice Cream Sandwich 4.0.3. It was running beautifully. Then I tried to recover my backed-up data, which worked, but then I tried to reboot the phone and it wouldn't boot.
And no, I don't remember seeing any "flash counter." Would they still be able to tell?
Has anyone sent a bricked phone in to Samsung before? If so, what were the results?
Also, how much do you think Samsung would charge me to fix it if they found out and voided the warranty? Hopefully less than $50? And they would charge me for shipping too, right?
random_person1308 said:
I tried flashing stock Captivate Gingerbread kernels to no avail. I googled and googled, and I tried everything I found. Including Odin and heimdall.
It was running Gingerbread 2.3.5 when I updated it myself to Ice Cream Sandwich 4.0.3. It was running beautifully. Then I tried to recover my backed-up data, which worked, but then I tried to reboot the phone and it wouldn't boot.
And no, I don't remember seeing any "flash counter." Would they still be able to tell?
Has anyone sent a bricked phone in to Samsung before? If so, what were the results?
Also, how much do you think Samsung would charge me to fix it if they found out and voided the warranty? Hopefully less than $50? And they would charge me for shipping too, right?
Click to expand...
Click to collapse
You recovered your apps thru TB? If yes, Didn't you read that you're not supposed to restore apps from titanium from GB to ICS? Might cause problem like this. No flash counter, they're not gonna notice this. Have you tried flashing again stock GB rom?(not just a kernel but a rom) And when you flashed that GB kernel, was that after you flash an ICS rom? Remember, when you're on ICS, you must use ICS kernel and not GB kernel. If it didnt work Just make a good story! Tell them you updated it through kies and updating was interrupted. Im pretty sure 2.3.6 is out on captivate. If they tell you its your fault for updating it, ask them why did they put update on kies when you can't even use it. Plus, they didn't warn you not to update it.
cessprin00 said:
You recovered your apps thru TB? If yes, Didn't you read that you're not supposed to restore apps from titanium from GB to ICS? Might cause problem like this. No flash counter, they're not gonna notice this. Have you tried flashing again stock GB rom?(not just a kernel but a rom) And when you flashed that GB kernel, was that after you flash an ICS rom? Remember, when you're on ICS, you must use ICS kernel and not GB kernel. If it didnt work Just make a good story! Tell them you updated it through kies and updating was interrupted. Im pretty sure 2.3.6 is out on captivate. If they tell you its your fault for updating it, ask them why did they put update on kies when you can't even use it. Plus, they didn't warn you not to update it.
Click to expand...
Click to collapse
No, I used Clockworkmod to recover data. It worked, and then I hit "reboot system now," and the phone wouldn't boot.
I already shipped the phone off, but thanks for the help, I really appreciate it! If Samsung doesn't fix it I know what to do now!
Ok, so I've been doing some research over the past few weeks and I figured out what I did wrong. I inadvertently tried doing a Nandroid restore (i.e. - restoring the whole system) instead of just apps. And I didn't wipe data first. That's why it was failing to boot. Why I couldn't flash the stock kernel from Odin; I have no idea.
As for the phone; Samsung fixed it free of charge (all they had to do was a reset...) and sent it back to me.
After getting it back, I rooted and installed Clockworkmod recovery using Corn kernel version 7.05. Geeve420 has an excellent guide over on androidforums.com. Then I flashed Cyanogenmod9 RC2, then Slim ICS version 4.2. It's running smoothly, though in 24 hours I have had 1 freeze (I did a battery pull and restarted) and a few force closes.
I also installed that Google Now app (the thread on XDA is called "The Google Now for ICS Project"). In other words, I went from being a complete n00b to getting JellyBean software on my phone! All I did was follow the directions, step-by-step, and it worked.
Thanks to all who helped!
random_person1308 said:
Ok, so I've been doing some research over the past few weeks and I figured out what I did wrong. I inadvertently tried doing a Nandroid restore (i.e. - restoring the whole system) instead of just apps. And I didn't wipe data first. That's why it was failing to boot. Why I couldn't flash the stock kernel from Odin; I have no idea.
As for the phone; Samsung fixed it free of charge (all they had to do was a reset...) and sent it back to me.
After getting it back, I rooted and installed Clockworkmod recovery using Corn kernel version 7.05. Geeve420 has an excellent guide over on androidforums.com. Then I flashed Cyanogenmod9 RC2, then Slim ICS version 4.2. It's running smoothly, though in 24 hours I have had 1 freeze (I did a battery pull and restarted) and a few force closes.
I also installed that Google Now app (the thread on XDA is called "The Google Now for ICS Project"). In other words, I went from being a complete n00b to getting JellyBean software on my phone! All I did was follow the directions, step-by-step, and it worked.
Thanks to all who helped!
Click to expand...
Click to collapse
Good for you then Try not to mess with it again. Haha. Do a lot of reading if you're a little hesistant. Plus, asking before doing so is not problem. We have a lot of helpful xda members here to guide you. Goodluck!

Categories

Resources