Related
hey guys,
looking to make the jump to 2.1 rom (most probably htcclay). but ive been looking at alot of different threads and i'm seeing a lot of comments regarding overclocking, setcpu, 528Mhz, 710Mhz, and JIT.
I'm trying to make sense of it all and want to know how to understand it properly. can anyone help? or point me in the right direction with a link explaining stuff?
im currently using a 32A magic with the old radio =)
Noob tries to help noob:
MHz refers to the frequency of the CPU. This reflects the speed at which operations are executed on an overall level. The original HTC Magic ROM was around 312 MHz if I remember correctly (which was in fact underclocked). Then the threshold was pushed to original frequency (around 512 MHz).
However, the frequenzy is not fix but rather adaptive in a range (speed stepping). If an application requires CPU time, the frequency goes up to those values indicated in the paragraph above. When the processor is idle however, frequency goes done to somewhere around 200MHz to save power (as higher MHz consumes more power).
Therefore 710 MHz reflects the upper limit of the range and is beyond the factory 512 MHz. Thus you gain roughly 30% peak performance.
JIT: Just In Time compilation. Another way to compile the Java code . This methode is introduced by replacing a library in the system and available in ROMs >= Android 1.6 . The performance gain is said around 30% but... I don't now whether this affects only apps or the overall system.
Hope this helps (probably not all numbers given are correct, but the concept should be).
Romwise I stick with Sanpei's Eris port. Not overclocked but smooth and good for everyday live
thanks for that dude! that makes a hell of a lot more sense to me =)
i popped the htcclay 2.1 rom from for 32A on last night and its working a charm. i set the frequency to max 528MHz, and min 245Mhz.
Is there any recommended settings to optimize the battery life so you can use it as an everyday rom? I grown quite fond of android 2.1, and the launcherpro beta is SO fast.
i know the whole idea of SetCPU is to customise whats right for you, but because I'm knew to all this I just need some direction as to what the best general settings are
Yes the non-sense 2.1 ROMs are speed wise amazing. I missed the HTC dialer though. I like to be able to type names on the keypad which is - to my knowledge - not possible on standard dialer. Also the HTC calendar app is a thing I havily rely on and the 2.1 Andorid Calendar is simply crap in comparison. That's why I stick with Sense ROMs.
However, speaking of overclocking. There is now clear rule. To factors affect your choice: your phone usage pattern, the individual quality of your hardware.
Hardware Quality: Processors and boards are guaranteed to operate flawless in a certain frequency range. Most processors can handle more that guaranteed (because there is a safety margin introduced by the factory) . However, how much more the processory can actually handle (before it starts to throw errors and faults) is rather individual.
Usage pattern meaning: if you're a havy gamer and you play ressource hungry games you will put the upper threshold as high as possible (however, you might also consider buying an XBOX which is more fun). Also if you feel that your phone response is sluggish. But, as long as you feel fine with the response of your phone, I would not go up with frequency (not for power reasons, rather stability of the OS). Go up if you feel that you need more processing power.
The lowest threshold is probably 128 MHz. I never tried that because I read of phones which would not wake up after having gone in standby. This is not dangerous (you only have to reboot) but personally I cannot afford to miss a call because of that. So I stick above 200.
Regards,
F
well in regards to my usage pattern, i dont play any games on my phone at all. for the reason being i dont want it to consume battery on the handset.
i dont even use it much for calls. i do a LOT of sms, facebook, youtube, emails, and some widgets which requires data usage. so what would u recommend for something like this? i want the rom to be zippy, not sluggish, but not drain the battery too fast?
and how do i know which operations/apps require CPU time?
no doubt about sense-ui is amazing! im even thinking of getting a htc desire soon, or just seeing what else is coming out soon. which model of phone are u using the sanpei eris port??
32A, New Radio. Use Radio Switcher from eyegor: Sticky Post. Works like charm but be careful and read the instructions (or you might end up buying a desire sooner than you intended to). I am usind a partitioned SD with EXT 3 System for apps2SD and a cache partition. SD can be formatted this way from Recovery.
I think Sanpei's Eris is the best 2.1 compromise for the time being. However, based on your comments on how you use your phone, probably you even don't need 2.1 and are fine with 1.5. Then try this (this is also for the new Radio: use Radio Switcher)
Cursorsense's 1.5 (Most solid build I know of)
http://forum.xda-developers.com/showthread.php?t=592856
Then before booting flash this:
http://forum.xda-developers.com/showthread.php?t=681378
Boot and fasten your seatbelt. It's not as fast as HTCClay... but its the closest experience you can get with any Sense ROM...
Regards,
F
PS: Probably there is a huge flame coming our way for off topic discussion. I guess we have to stop. Going for cover
LOL! ur help has been awesome my friend =)
LOL! ur help has been awesome my friend =)
I would recommend you use cyanogenmod 5 if you want stability
sense roms cannot compare to AOSP roms for stability because they are a proprietary framework which cannot be updated unless htc releases a new version
and CM 5 is the fastest eclair rom I have tried - faster than even donut roms
i wouldnt go with 1.5....there are to many apps/widgets that wont run...
i would recommend cyan's latest 1.6 rom, 4.2.15.1 .. stable (better than stock roms), fast and has great battery life...
if you must get 2.1 then go for cyan's latest 5.0.7 test6 2.1 rom, or sanpei's if you must really want sense...
i run cyan's latest 2.1 rom and its stable as hell, as fast as his 1.6 rom, rock solid and great battery life..
ultimately its your choice.. i would stay away from JIT though, to unstable...
feicher said:
Yes the non-sense 2.1 ROMs are speed wise amazing. I missed the HTC dialer though. I like to be able to type names on the keypad which is - to my knowledge - not possible on standard dialer.
Click to expand...
Click to collapse
try DialerOne, it has the "keypad-T9" function and is free on the market
the only downside is it's really not as pretty as the sense dialer(feels a little clunky and outdated)
as far as the ROM goes, i'm using alan090's modded CM5 t5 right now, OC'd to 710MHz and with JIT enabled. best rom i've had so far, really snappy and stable. JIT seems to be very stable on my phone, i wasn't even sure i had enabled it correctly at first.. until i ran linpack and got a good 4.5 MFLOPS
I have a somewhat related question:
should i be afraid of a overclocked cpu rom heating wise? sometimes i feel my phone heating a little and i am using a default speed rom.
I'm sorry about the long post if you want to get straight to my question, skip the first paragraph
I was avoiding this because it is a fairly noob question set (and I've seen a history of new members on XDA being berated for questions that could have been answered by any amount of research and I'm unsure whether my question set will fall into that category), but I just can't do anymore research since most information I'm finding is not in one place and I can't seem to find a full feature list for any of the ROMs and Kernels I research and look into, and on top of that there are SOOO many.... I'm about to pull my hair out of my head and my skull along with it, and every search engine I use is contemplating homicide (google has divorced me and is planning my murder for the life insurance money, and duck-duck-go is biting my heels with its bill) and firefox is planning a suicide bombing taking the 50 or more tabs with it along with my RAM, and I'm not terribly sure any of those actions aren't justified (and also, as you can probably tell, I'm going NUTS!). Just the amount of information and the amount of digging I have to do to find a single answer for the MANY questions I have regarding these ROMs and Kernels is staggering (I remember having similar problems searching to find the right linux distribution for me, but it wasn't this hard and after 2 or more weeks of searching, I didn't find myself not having any substantial answer, nor did it actually take two weeks)
anyways, enough with the crazy intro to the question
My current phone is a Nexus S 4g (sprint) currently running the stock ROM and Kernel, gingerbread 2.3.7 (build GWK74). I have it rooted and I have clockwork mod recovery flashed as well as ROM manager installed. I'm looking for ROM and Kernel recommendations (and combinations, I want to make sure they're compatible) as well as reasons why they might fit my needs
I need a ROM and Kernel that:
1. Won't reduce any of the current features I have on the Stock ROM/Kernel I have (though I don't use NFC so if google wallet isn't applicable, that's not a loss)
2. Will allow more steps in frequencies on my CPU (so CPUtuner won't tell me it can only go between 100Mhz and 1Ghz when I attempt to manually change the frequency, I can get one governor to get me 400mhz, but that only adds one more step to the 2 current steps, and performance and powersave governors don't work with the stock kernel, not that it's a big deal, I prefer conservative and ondemand)
3. will allow voodoo control & voodoo color (or any other feature that might be useful, though BLN isn't a big deal to me)
4. Has better battery life (while in use, use being things similar to internet browsing) than stock ROM/Kernel (so UI flare isn't completely necessary, and underclocking and/or undervolting would be great, as long as it doesn't sacrifice speed)
5. The UI should be less jittery than I'm seeing the stock react half the time (though that might be an effect of the CPU tuner)
6. I would like overclocking (however if that interferes with battery life, then I can live without it as long as it doesn't make the speed worse than stock)
7. this coincides with #1, but I think it should be said anyways: I don't want any connectivity (besides maybe NFC) to be affected adversely, so I want 4g, 3g (given), wifi, tethering, etc...
a few questions I have that I can't seem to clear up:
1. I'm beginning to develop software for android, so I'm wondering if any ROM and/or Kernel will affect ADB or any connection to my PC at all
2. What advantages do CM7.1 nightlies have over the CM7.1 stable, and any disadvantages (because I would prefer stable unless there's something on the nightlies I might want)
3. And any advantages ICS ports might have to anything listed above? and compatible kernels?
well, I have done some research, and the two ROMs I'm currently considering are Oxygen and CM7.1 (stable). I like Oxygen because it's a barebones rom with a few extra features that (from what I've seen thus far) don't interfere with performance or battery life. I like CM7.1 because it seems to be fairly quick and has a good feature set.
now I know that the performance might be more affected by the kernel than the ROM, so the kernels I've been most interested in are Netarchy and Trinity. Netarchy has decent speeds (though I'm unsure of its effect on battery life) and has a great list of features (such as voodoo control). Trinity is fast (depending on which version, I was debating on the overclocked version that doesn't go to the highest clock setting and the undervolted version which stayed at 1ghz but had great powersaving) because of its speed and/or powersaving, but I'm unsure of all of the features it has)
I had read that CM has its own kernel, but I can't find any substantial evidence to it besides a few short forum posts on various forums. I can't find anything on the CM site that backs up those claims (I could have just missed it though)
I was considering MIUI but I had heard that it had some translation problems from chinese into english and I'm not sure if you can get the text to read from left to right (and be alligned that way). Not sure if that has been fixed and if the features on there are necessary and/or make it difficult to use
I'm asking here because I'm sure I've barely scratched the surface on all of the ROMs and Kernels that might be helpful to me (and hope to get info from more knowledgeable people)
I have been referring to this thread
http://forum.xda-developers.com/showthread.php?t=1067813
I'm sure somethings I want aren't possible or if they are, there's negligible gain (I'm starting to thing that about battery life with the more I read)
once again, I apologize for the extremely long post, as you can tell I'm verbose (as it's really the only way I know how to get my point across)
if you need further information, feel free to ask. If any information needs to be cut off (especially if this needs to be cut shorter) let me know
I hate to do this but
BUMP
my main problem with this is that most of these roms and kernels seem to do the same thing but all have different problems
I've also found that some versions are more buggy then others which has thrown yet another curve ball into my research (not as bad as ICS but bad enough). I should have expected it but it's just one more thing to go digging for
an answer at all would be nice, other than just the views with no post. Even if the next person's answer is "this is stupid" or something of the like
even that would help me believe it or not
Honestly, your answer is the same one everyone else gets. Try them out and see. Most of the kernels out there should work with any of the ROMs, even the stock ROM. Personally, I have had no real issues with any ROM/kernel combo I have tried. I use CM because I am so used to the features they add and I dislike the stock GB theme. I'm using the last nightly cm7 had because there was something they didn't have in the stable but I don't recall what that was. But most any ROM or kernel you get for gB is likely done being developed for. The combination in my signature serves me very well. A lot of people do like oxygen. I just missed cm too much. Most of the kernels should allow for all of the wants you have.
I also ran cm9 with the glados kernel and honestly, it ran perfect for me. My only issue was with a few apps i use not wanting to cooperate.
Sent from my Nexus S 4G running CM7/franco.Kernel
Sent from my Nexus S 4G running CM7/franco.Kernel
alright thanks (which the button did for me)
I understand that (and some threads I looked over had answers like that, so I figured someone might say something along the lines of "try it out") I was mostly looking for input from past users about some ROM or kernel
I just don't want to end up with a broken phone before I leave for a week or two (to a rural area for a couple of days)
thanks for the answer, all I really need to know now is have there been any problems with any of them running ADB or transferring files from PC to phone?
EDIT: well I'm going to continue trying to get android SDK working on my linux OS, and I'm going to install and run a few ROMs and Kernels
ROMs I'm going to try: CM7.1 Stable, Oxygen, CM9
Kernels: Netarchy, Trinity, matri1x, and glados (with CM9)
Well, since getting my HTC Glacier last April, I've been on XDA quite frequently. Actually daily. Never gotten around to registering though. Just starting this thread to complete my 10 post requirement to post help/fixes on the development forum here. Since getting my Glacier last year I've had numerous ROMs. Many from the Virtuous Team, including the first sense 3.0 leak ROM, Fusion. Then from there to Unity from the official shipped RUU for the Pyramid. Knowing Sense ROM's use a lot of resources to make it all flashy, I wanted to try out a battery friendly ROM. I had some problems with CM7. It was nice, fast, and easy on the battery, except in the build I downloaded there was a connection bug that would render the data/wifi useless until I restarted the phone. From there I saw the Virtuous Team release their sense 3.5 ROM Affinity, I tried it for a while but once again, like all sense ROMs it was quite the battery hog. I decided from there to go to the weekly builds of MIUI from thederekjay. It was my daily driver for quite the long running. Until recently Ice Cream Sandwich ROM's flooded the development threads so I thought I'd try Febyc's AOSP Creamed Glacier. I ran that from the first beta release until I switched over to the Virtuous Quattro port by Febyc. And ran that until a few days ago I flashed Zipsnets build of Creamed Glacier which had the camera fix. Since then I haven't seen a smoother build of Ice Cream Sandwich for the HTC Glacier. So comes to today, currently running that same build by Zipsnet as previously stated. Loving it. Waiting until Virtuous Primadonna comes out of Alpha to try out sense 4.0 for a couple days depending on the battery usage. Oh, left out a few things. Tweaks I have used that have helped my glacier fly are as follows:
V6 SuperCharger
gps.conf tweaks to speed up GPS fix
Juice Defender battery saver [Ultimate]
ILWT Tools (free), app to tweak governors/cpu speed using screen on, screen off, charging, low battery, and temperature using a built in Daemon. Like implemented in newer virtuous ROMs
Feel free to check out/use any of the above tweaks to help make your phone an iPhone killer!!!
Awesome. Good to have another undiscovered MT4G user
Sent from my Sense 3.6 Glacier using XDA Premium.
invasion2 said:
Awesome. Good to have another undiscovered MT4G user
Sent from my Sense 3.6 Glacier using XDA Premium.
Click to expand...
Click to collapse
I'm quite the procrastinator for things haha. Used to have a Blackberry curve 8520 before this phone. I came over from IPMart Forum BBOSZone, tried to find a similar forum for Android but couldn't so I went here after being told about the amazingness of XDA. I was impressed when I came here. Have to say XDA has been my phone's savior many times over. I wouldn't be surprised if it is in the future as well. Helped me root the phone, hardest thing for me to do while pushing g-free files and then it still didn't work with visonary temp-root then perm-root method. But the oddest thing happened. After pushing the g-free files to the phone and running, unsuccessfully, I was able to SuperOneClick the root oddly enough. Keep in mind that the SuperOneClick method did not work prior to g-free attempt at root. I was finally at peace when I found out I had s-off and root. Following my root, the tweaks I applied, beside the ones posted in the OP, were a modified boot image. It reads "rooted MyTouch 4g" with the Android Central crossed arms android on it. Flashed CWM, duh! Flashed a new ROM because stock froyo sucked major ballsack. Experimented overclocking applications. Looking back I see what I n00b I was to tweaks and crap. I had no F***ing clue what a kernel was or what it did to your phone. Or what a governor was. Etc, etc etc. . . But obviously, after a **** ton of indulging my flash addiction, I have done sooooo many things I can't even remember, I have gotten to a phase where I could successfully aid Developers in Debugging and ROM testing and help other users solve problems such as maximizing your battery life on your phone. From kernels to ROMs to init.d scripts to root file modifications. Pretty much any type of tweak or modification that any power user could use without having to develop it themselves. My philosophy is simply:
Let the developers develop ROM's, tweaks, and modifications, and let the users use the ROM's, tweaks, and modifications to their own discretion. I'm glad to join the HTC Glacier XDA Forum.
Looking back to a few weeks ago, I wish I had been a little more thorough, and read more before I altered my phone. My first few posts were made in an absolute panicked state of mind, because I didn't know anything about rooting or flashing! (I flashed a Rom and didnt flash the boot.img which had me stuck on bootscreen) I started out by doing the HTC unlocking, which was the biggest mistake I made. But now, I have everything under control, running Black Ice. But the point of this post was to say that I really respect how you chose to kick back and be patient, which is something I didn't do but should have! I now understand what I am doing, which makes things easier on all involved. Welcome to XDA..
Sent from my Black Ice'd Glacier using xda premium
I would suggest you try the hybrid ics with AOKP and Zipsnets build. It's an odexed ROM but runs faster than a mother f***er. After you flash, I would suggest you, if you are a battery life enthusiast, to try the V6 Supercharger scripts found in the OP. Zepplinrox has three downloadable scripts to tweak your built in memory manager and a 3G supercharger script to speed up your data (you can confirm via speedtest) as well as kick ass kernelizer which tweaks your kernel and changes your I/O scheduler to support long battery life with a lag free environment. You use script manager to run the installation scripts and with this ROM, you need to navigate to your init.d folder and set the supercharger scripts to run as root and run at boot so when you restart your phone the tweaks will be enabled. Also, I would recommend ILWT tools, a GUI that installs an OC daemon to the root of your phone that allows faster profile switching without running a 3rd party app to do so. As with the supercharger scripts, ILWT tools installs an init.d script which needs to be set to run as root and run at boot in order to enable the OC Daemon. With this ROM, juice defender isn't needed because the built in ROM control has power saver settings that mimic juice defender, so you can save memory with one less background app and battery with the effectiveness of juice defender, and for free. It runs great on this ROM and all the OP tweaks can be applied to any ROM, giving you the same effectiveness as posted here. I just can't attest to a ROM I haven't tested any tweaks on.
Sent from my HTC Glacier using XDA
Why is the overclocking area on my Captivate greyed out after installing cm9 latest nightly???
I honestly do not have the time to read hundreds of pages of forums to see if someone has allready had this issue.
Of course i tried searches.
It happens on any cm9 nightly, not just the latest one.
I want to be back at 1.2ghz. being stuck at 1ghz. is rediculous to me after being so spoiled. (lots of google earth, gaming and other stuff that a higher clock speed helps with)
If I have to I will just go back to 2.3.7 and a swift 1.3ghz. MAX
BUT it seems like I should be able to overclock using CM9 on my captivate.
Please do not explain the system settings and performance yadda yadda yadda, anymore, i am obviously familiar enough with an android device to know how to use system settings etc. if i can root and install custom roms i can read and point and click as well.
Sorry for the frustruation but i seriously can not deal with anymore nonsense and 80 diff. pieces of broken info from people that only "heard from some guy" about how to do all this.
Thank you in advance... forever learning"!"
yellowfuse said:
Why is the overclocking area on my Captivate greyed out after installing cm9 latest nightly???
I honestly do not have the time to read hundreds of pages of forums to see if someone has allready had this issue.
Of course i tried searches.
It happens on any cm9 nightly, not just the latest one.
I want to be back at 1.2ghz. being stuck at 1ghz. is rediculous to me after being so spoiled. (lots of google earth, gaming and other stuff that a higher clock speed helps with)
If I have to I will just go back to 2.3.7 and a swift 1.3ghz. MAX
BUT it seems like I should be able to overclock using CM9 on my captivate.
Please do not explain the system settings and performance yadda yadda yadda, anymore, i am obviously familiar enough with an android device to know how to use system settings etc. if i can root and install custom roms i can read and point and click as well.
Sorry for the frustruation but i seriously can not deal with anymore nonsense and 80 diff. pieces of broken info from people that only "heard from some guy" about how to do all this.
Thank you in advance... forever learning"!"
Click to expand...
Click to collapse
Were you using Glitch before, or some other custom kernel? I didn't think cyanogen's stock kernel supported overclock. If you install a new nightly you have to reinstall your overclocking kernel.
I have been using cyanogenmod only. I never purposefully installed a custom kernel then the rom. Just used Odin to root/clockwork and so forth. Never heard of Glitch. Through out all of my custom rom experiences with the captivate I have been able to use the sys. settings or osmonitor to overclock to a max of 1.3ghz. I have tried miui or whatever its called for about five minutes. other than that just cm6/7, then updated to cm9. in the past whatever kernel i had, stayed in effect, i guess.
I will do a search for custom kernels for cm9 on captivate.
I havent seen any yet, but who knows. I am used to simply stunning roms and the moto droid one. That was great! SS/chevy~ would always have links to the latest kernels avail. for the current builds etc. Good job too.
SO... the search continues.
*Mystery: If I cant even change cpu settings in osmonitor (up or down), yet it lets me enable root mode, what does that mean? The greyed out overclocking area in perfomance settings (up or down)???
I need to learn more"!"
As mentioned, glitch kernel b6 is a great ics kernel. Flash over CM9 and install nstools from the market to control all the kernel settings such as oc/uv, voltages etc etc.
Sent from my glitched ICS Captivate using XDA App
The options are greyed out because the stock kernel currently doesn't support overclocking. Glitch is awesome, and Semaphore kernel is pretty nice too.
Sent from my CM9 ICS i897 Captivate
IcyGlitch for OC, and Semaphore for 400MB mem.
Well Glitch has 387 MB of free RAM
both kernels are good
I want my 13 MB! They are unused so occupying them is unforgivable. IcyGlitch is solid kernel, and I hope 400MB will be added.
b-eock said:
Well Glitch has 387 MB of free RAM
Click to expand...
Click to collapse
I recently rooted my Mytouch 4G Slide (s-off) and have been trying out several roms, my favorite of which are: Blue6IX's Bulletproof rom, Virtuous Primadonna, and Virtuous Inquisition. I like all of these, since each have their benefits over the other. Bulletproof is more solid and maintains the ability to use all stock features, most importantly the camera. The Virtuous roms are both visually more exciting (Inquisition is an ICS style rom), BUT the camera crashes if you even try certain camera features or some random things fail like trying to send a photo via text. All those pros and cons aside, the main feature keeping me on Virtuous Inquisition is the overclock kernel. It overclocks up to 1.7Ghz, and that's damn cool if you ask me.
Since the Virtuous roms have so many issues, I want to be able to use a rom like Bulletproof and still be able to overclock it. I looked all over this forum for overclock info/kernels and found just 2 threads. One was an older one by Romanbb called Kanged (still available for download), the other was from Blue6IX including several variations of kernels (but none of the download links exist anymore).
Then I did some more research on the kernel used in the Inquisition rom. Everything I read pointed to a developer that, apparently, only has overclock kernels for the HTC Sensation (can't think of his name at the moment). This seemed a little strange that a kernel for a different phone would be compatible with mine.
So this is where I reached a dead end with even more questions than I started with:
Are overclock kernels specific to each device? In other words: if I found one for a Sensation or whatever, would I be able to use it with my MT4GS?
Since Romanbb's "Kanged" OC kernel seems to be the only one still available for the MT4GS, would it still be compatible with newer roms? And for that matter, does is have to be used with a particular version of Android, or Sense vs ICS?
You see, I don't know enough about overclock kernels (or even kernels, themselves) to know all the right questions to ask in this situation. All I know is that Bulletproof has the stability I want, while Inquisition has the speed I need. And before I go cutting & pasting bits and pieces of one rom into another, I'd like to know what I should be doing or if I'm even on the right path. So maybe someone can point me in the right direction and help me to understand compatibility of oc kernels & how they can/can't be implemented. Also, where the hell do I even find oc kernels for this model of phone?
Thanks in advance to anyone who can help me to understand all of this. And I apologize in advance for any headache my abundance of questions and lack-of-understanding may cause.
All of the ICS/JB roms that use the v3 kernel by TeamDS are overclocked to 1.7ghz as well. Oh and don't flash a Sensation kernel...you wont boot. Also I'm not sure but I think the latest bulletproof (v1.1) has overclock to 1.7
Edit btw this belongs in the general because this is a question
xmc wildchild22 said:
All of the ICS/JB roms that use the v3 kernel by TeamDS are overclocked to 1.7ghz as well. Oh and don't flash a Sensation kernel...you wont boot. Also I'm not sure but I think the latest bulletproof (v1.1) has overclock to 1.7
Click to expand...
Click to collapse
I'll check those out. I've noticed there's a common trend between all ICS roms for the MT4GS: they all have the same camera failures as well as plenty of other random issues, although some have more than others. So I'm hesitant about trying any ICS roms older than a couple months, since it seems that a truly stable ICS rom for this phone with minimal issues doesnt exist yet. But yes, I will check it out.
As for Bulletproof, if it does have overclock then something is wrong because I tried SetCPU (several others as well) and I wasn't able to set a max frequency higher than 1200-ish mhz (or 1100 something?). No matter what I tried the frequency stayed at stock settings. Thats why I'm trying to find out where to find a compatible oc kernel and how to install/flash it on top of a rom that didn't originally have an oc kernel.
With the Virtuous Inquisition rom that I'm currently on, it allows a max of 1728mhz which is great. Although for some reason whenever I set up a new profile within SetCPU or even change the Min/Max settings, the setting doesn't have an effect on the actual frequency longer than a couple seconds before reverting back to default. And I tried disabling Perflock but I get "Error: Misc Exception.. ". Which brings me back to my original thought about the kernel used in this rom; I found the name of the dev and kernel version used in this rom: "SebastianFM -Sensation 3.0.13 kernel". When I looked up that guy's kernels, they all seem to be exclusively for the Sensation, but his kernels are being used in this Inquisition rom that is compatible for the Sensation, Evo3D, and MT4GS. So the fact that this (apparently) is a Sensation kernel might explain why my settings in SetCPU have no effect and I'm unable to disable Perflock.
Still though, it would be nice to get the best of both worlds; stable rom, fast-as-hell kernel.
Edit btw this belongs in the general because this is a question[/QUOTE said:
Thanks. Didn't know that, I figured this was a development-related question so the "Development" section made sense, and I made sure I labeled it with a "( ? )" to avoid any confusion. My mistake, I suppose. And although I've been a long time reader of this forum, I didn't set up an account til last fall and hadn't actually started a thread til now. Now I know. Soo, is there a way to move this thread and I'm just not seeing it?
Click to expand...
Click to collapse
@eon said:
Now I know. Soo, is there a way to move this thread and I'm just not seeing it?
Click to expand...
Click to collapse
No, you are not allowed to move threads, even if you created them.
The post was reported, and the thread moved. For future reference, you can do this as well - but also for future reference, no questions should ever be in the Development section. Thanks!