Database Info

Recovery Help

I have clockworkmod and I updated the recovery to 3.0.0.8. When I boot into recovery and try to install EC10 comavolt and it won't let me. I also tried to install other recovery's via Rom Manager but it says download failed.

ddb1984 said:
I have clockworkmod and I updated the recovery to 3.0.0.8. When I boot into recovery and try to install EC10 comavolt and it won't let me. I also tried to install other recovery's via Rom Manager but it says download failed.
Click to expand...
Click to collapse
Rom manager is not compatible with our phones. You will likely need to revert back to an older version of cwm.
Sent from my SCH-I500 using XDA App

akellar said:
Rom manager is not compatible with our phones. You will likely need to revert back to an older version of cwm.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Ohhhhhhh OK well how would I go about reverting back and I am looking for the info while Im sending this

ddb1984 said:
Ohhhhhhh OK well how would I go about reverting back and I am looking for the info while Im sending this
Click to expand...
Click to collapse
I too would also like to know where I can get this older version of cwm.

http://forum.androidcentral.com/ver...roms-w-root-clockwork-updated-3-25-a-389.html
There should be a link to a cwm.tar file (not the exact name) on this page. Flash it via odin and there you go.
Sent from my SCH-I500 using XDA App

emarohl said:
http://forum.androidcentral.com/ver...roms-w-root-clockwork-updated-3-25-a-389.html
There should be a link to a cwm.tar file (not the exact name) on this page. Flash it via odin and there you go.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Thats my problem I cant use my USB right now and I can only zip at the moment but barely can do that do to the Recovery messing up

Can't use USB right now...? I think you might be confusing transferring files to the USB card while the phone is booted, with flashing a TAR file via Odin.
Remember--when you're flashing via Odin, your battery is pulled, the phone is off, and then--while you do plug in your USB cable--it's only receiving power through that USB connection.
Use BDE's "How to customize.." guide here, and go directly to step 2. If you don't already have it, grab the "Red" Recovery from this thread (also linked to in BDE's guide); grab the TAR file listed there. Then go back to the guide and follow the instructions for Step 2.
That should get your recovery back to Red recovery, and I think from there I'd make sure everything else is working and the phone boots before doing anything else. Once it's up and running, then maybe give the kernel another shot.
EDIT: Thought of what else you might mean; if you're unable to get Odin to recognize when your phone is plugged in, hit up the Samsung website to get the Samsung USB drivers. Then, when you hold the volume down key as described in the guide, you should see one cell of Odin turn yellow, which tells you your phone has been recognized. Assuming you have a Windows PC, at least.

ChromWolf said:
Can't use USB right now...? I think you might be confusing transferring files to the USB card while the phone is booted, with flashing a TAR file via Odin.
Remember--when you're flashing via Odin, your battery is pulled, the phone is off, and then--while you do plug in your USB cable--it's only receiving power through that USB connection.
Use BDE's "How to customize.." guide here, and go directly to step 2. If you don't already have it, grab the "Red" Recovery from this thread (also linked to in BDE's guide); grab the TAR file listed there. Then go back to the guide and follow the instructions for Step 2.
That should get your recovery back to Red recovery, and I think from there I'd make sure everything else is working and the phone boots before doing anything else. Once it's up and running, then maybe give the kernel another shot.
EDIT: Thought of what else you might mean; if you're unable to get Odin to recognize when your phone is plugged in, hit up the Samsung website to get the Samsung USB drivers. Then, when you hold the volume down key as described in the guide, you should see one cell of Odin turn yellow, which tells you your phone has been recognized. Assuming you have a Windows PC, at least.
Click to expand...
Click to collapse
Yea I even put in another post about my USB issues and can't seem to find a solution. I may just purchase another phone. My girls works perfect and no connection problems but I may of damaged it or something but it only charges doesn't work other wise. ADB, USB file transfer, nothing.

ChromDog's post was a mess. I'm ignoring it.
So you're saying you can't even get the phone to work in Download mode? Will the phone actually boot up into Download mode?

add144 said:
ChromDog's post was a mess. I'm ignoring it.
So you're saying you can't even get the phone to work in Download mode? Will the phone actually boot up into Download mode?
Click to expand...
Click to collapse
Yea I get the yellow screen with the android saying downloading. I have tried 3 cables and 5 diff computers. I even went to cellular south and got a new cable. When I figured it was my phone was when my girls phone worked with the same equipment. Also sometimes when I plug it up to the PC doing download mode it will say USB Not Recognized and I have the drivers installed I even tried to select the specific driver but didnt know which one to do out the that folder of many LOL

Have you tried opening ODIN in Download Mode anyway just to see if it'll recognize the phone?

add144 said:
ChromDog's post was a mess. I'm ignoring it.
Click to expand...
Click to collapse
Rare is the occasion that wiser words than these have been uttered. XD
While I was getting pretty wordy with my answer, Add's more or less on the same track as me: Even with the USB not working when the phone's booted normally, does Odin recognize it even so, or is Odin what you've been trying and not getting to work?

ddb1984 said:
Yea I get the yellow screen with the android saying downloading. I have tried 3 cables and 5 diff computers. I even went to cellular south and got a new cable. When I figured it was my phone was when my girls phone worked with the same equipment. Also sometimes when I plug it up to the PC doing download mode it will say USB Not Recognized and I have the drivers installed I even tried to select the specific driver but didnt know which one to do out the that folder of many LOL
Click to expand...
Click to collapse
The different computers you tried wouldn't really matter unless each one had the Samsung USB driver installed. Also, does your girlfriend have the same model phone as you? If not, it's not necessarily a fair test.
It does sound like you've tried using Odin, and it just hasn't worked (based on the bolded part). So, try this:
http://www.samsung.com/us/support/downloads/SCH-I500RKAXAR
Go to the above link. Underneath where it says "Download Center for SCH-I500RKAXAR", look for "Manuals | Software". Software should be a blue link; click on that.
You should see a list of four items you can download. Look all the way to the right, under the "File" column; there should be four little icons. Click on the first of the four, and Agree to their user agreement. Save the file somewhere easy to remember, and run that file. I'd suggest doing this on any home computer you might connect your Showcase to.
Then, try putting the phone in Download mode and connecting to Odin once again.
Does it work after that?

I dont know how or why but I was able to get odin to work on a XP machine and I flashed the odin files for pick and pack and the odin files for cwm recovery all and was able to get both the recovery and 2.2 but I have more problems LOL. My internal memory is 0. I factory wiped and wiped cache via red recovery but to no avail. Still getting 0

If you can get into your phone and do stuff in Android, I'd run a Titanium Backup of your apps and stuff. If not, you may be SOL.
I'd start by just finding a stock ROM for 2.1 or 2.2.1 and Odin'ing that over to the phone. Start completely clean, no custom ROMs. Then load up CWM Red again.

ChromWolf said:
If you can get into your phone and do stuff in Android, I'd run a Titanium Backup of your apps and stuff. If not, you may be SOL.
I'd start by just finding a stock ROM for 2.1 or 2.2.1 and Odin'ing that over to the phone. Start completely clean, no custom ROMs. Then load up CWM Red again.
Click to expand...
Click to collapse
I have been looking for 2.1 Stock Rom for CS but I have not been able to. I have my apps backed up but unfortunately I can't install them in this Rom yet but I will keep trying to get it.

Ouchie! I just had a look throughout the Mes Dev thread, and the one post I saw for EB11 for Showcase had the link removed. Couldn't find any other reference for an actual stock 2.1 or 2.2.1 specifically for the showcase; the guys *may* tell you the Mesmerize ones work for Showcase, but DO NOT use them until one of them says so. I would guess not, but don't know for sure.
I'd see about hitting the IRC channel and asking for a clean stock ROM from there, and/or maybe getting some "in-person" advice that way. ...or hope Phidelt82 or Elijahblake come across this thread to get it to you/help you out otherwise. XD

LOL IKR but I have already asked them for a Stock 2.1 Rom for CS and I was pointed to someone but they haven't responded to me so idk. And thanks for some of the info and I am happy I was able to get the files b4 he removed his comments. I had them already saved on the computer.

ddb1984 said:
LOL IKR but I have already asked them for a Stock 2.1 Rom for CS and I was pointed to someone but they haven't responded to me so idk. And thanks for some of the info and I am happy I was able to get the files b4 he removed his comments. I had them already saved on the computer.
Click to expand...
Click to collapse
Some individuals were trying to put together a 2.1 stock image but weren't able to get one working, the one they have is stock 2.2 and that is the only pure stock ROM they have, but there is no reason to go back to 2.1 unless you planned on using it and staying with it, so a clean flash to 2.2 should fix any issues you may be experiencing.

bdemartino said:
Some individuals were trying to put together a 2.1 stock image but weren't able to get one working, the one they have is stock 2.2 and that is the only pure stock ROM they have, but there is no reason to go back to 2.1 unless you planned on using it and staying with it, so a clean flash to 2.2 should fix any issues you may be experiencing.
Click to expand...
Click to collapse
I am with Cellular South and I don't believe there is a stock for us just yet. I was also able to put the SDcard in a card reader and put Superclean 2.9.2 on it for Showcase. Pray I get internal storage and my phone works.
YES!!!!!!!! Internal Storage w/ Superclean and a working recovery. Well I have more issues to attend to but that's wonderful to me.

Bar None I need bare facts

What is the best rom out there. Also i am running Serendipity 6.2 and for the life of me i dont see detail instructions on how to upgrade nore video. i am stuck. some help please.

Best rom threads are pretty much frowned upon since there have been about 600 of them created (maybe an exaggerated figure). Plus it's based on personal preferences anyway. As to your other problem, to get any help we are going to need quite a bit more detail about what the issue is please.

You download it.
You flash it.
Ipso facto.
Sent from my Captivate

Best ROM can be found here:
http://tinyurl.com/3tq5elx
But dont tell anyone...

MikeyMike01 said:
You download it.
You flash it.
Ipso facto.
Sent from my Captivate
Click to expand...
Click to collapse
let me try to elaborate...
you download the update file for your rom..
you flash the update file for your rom..
dido...

blacura said:
What is the best rom out there. Also i am running Serendipity 6.2 and for the life of me i dont see detail instructions on how to upgrade nore video. i am stuck. some help please.
Click to expand...
Click to collapse
matter of oppinion but i say dragon rc6 is the best. well it has the greatest ever boot sequence. but it is not a popular one and requires odin to get the full seemless splash screen to splash screen to boot animation to live wallpaper sequence.
as for the other question well what problem are you having? i mean if you are already on a custom rom all you need to do is backup the apps in titanium and reboot into recovery which may be in the power menu, otherwise power down, hold both volumes, push power, hold all 3 untill the first splash screen pops up. once in cwm recovery clear dalvik cache in advanced cwm features for good measure, then you go to install .zip from sd card>choose zip from sdcard>find your new rom and flash it.
if all hell breaks loose;
1 you use odin to flash back to stock,
2 master clear, (optional, looses all backups unless you move them to computer before everything went wrong)
3 boot up phone,
4 put rom on internal sdcard,
5 (option a. fast and dangerous) check that 3 button combo works, if it does then odin flash speedmod kernel .tar. phone wont boot. be warned. main reason to verify 3 button is you will need it if the flash goes bad. this is more dangerous from 2.1 but is the fastest way to flash a rom.
5 (option b. slow and safe) alternatively you can root in stock 2e recovery via update.zip then install rom manager
6a (speed mod method from 5a) 3button into recovery it should be cwm, (green letters)
6b.1 (rom manager method) open rom manager, select flash cwm recovery
6b.2 reboot into cwm from rom manager, (it will reboot but not into cwm yet) select reinstall packager, this step may need to be done twice before it enters cwm
7 install .zip from sdcard
8 choose .zip
9 flash new rom
pretty standard stuff. there should be a thread on this, oh wait there are several. so please search and be more specific, if there is a specific question you have then ask. don't just say there is no instructions, well because there is!

I use Andromeda3. It is a great ROM for battery life and reliability.

Cm7 is the best
Sent from my SGH-I897 using XDA Premium App

AdamOutler said:
I use Andromeda3. It is a great ROM for battery life and reliability.
Click to expand...
Click to collapse
Haha nice Adam, posting about your work
But umm, it mostly goes by preference.. I suggest you look them up on youtube (Mobile Techvideo's channel). There's some like Adromeda3 which are very stable and stock styled or some like Team Phoenix's work that are more customized.
At the end, they're all great and you have to choose the one that suits you the best

skizzz said:
Best ROM can be found here:
http://tinyurl.com/3tq5elx
But dont tell anyone...
Click to expand...
Click to collapse
+1 that is the best i have used as well

The search feature works wonders.
Sent from my SGH-I897

There is no best rom, just a best for you rom. Flash a few and find your fav

Help with Valhalla-BlackEdition-2.3.7

its not letting me unmount system in CWM everytime i go to mount/system it says errror mouting/system! I had rc 3.2, i was flashing 3.3 when this happened. help would be greatly appreciated

I'm having the same problem...except I didn't even think to check it since it's normally set to UMMU anyway...so I flashed the ROM and I'm stuck at the Galaxy S 4G logo screen.
I was on Valhalla Black 1.6, or whatever the latest version before the hybrid was. I've tried flashing back to that and a few other ROM's, but none are working. I really need my phone lol.
If anyone has ANY suggestions, please let us know. I am trying currently to install the drivers on my laptop so I can maybe go back to an older set of bootloaders, but something is not working with that either...UGHHHHH

I believe this is a GB issue with most kernels. Try flashing the modded KJ6 kernel, and see if that fixes it.
http://forum.xda-developers.com/showthread.php?t=1380331

A for the issue, I have had a similar issue. To fix it, I used Odin to flash back to Kj6 stock, Odined KH1 then XWM BH's's Kj6 kernel and then flashed the ROM i was currently using, following the instructions exactly and all was good...
I posted this in another thread concerning the battery issue, but it should work for your issue you as I was having the unmount issue with a different ROM and the battery issue at the same time. The ROM was a GB ROM as well (2.3.5)
It cleans out the gremlins
Sent from my SGH-T959V using XDA App

thomas.raines said:
A for the issue, I have had a similar issue. To fix it, I used Odin to flash back to Kj6 stock, Odined BH's's Kj6 kernel and then flashed the ROM i was currently using, following the instructions exactly and all was good...
I posted this in another thread concerning the battery issue, but it should work for your issue you as I was having the unmount issue with a different ROM and the battery issue at the same time. The ROM was a GB ROM as well (2.3.5)
It cleans out the gremlins
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I'm not able to get past the main bootup screen, so no-go on getting to the market. This is the first time I've had an issue flashing and it's been a few months since I've even wanted to switch ROM's since Valhalla Black worked so well for me.
I flashed the kernel, but still can't change the mount point for /system...tried to flash the ROM anyway cuz I'm a dumbass and still not able to boot. I'm trying to get into ODIN to revert back to a stock GB ROM, or any GB ROM for that matter...my laptop is telling me the drivers weren't installed correctly. ODIN seems to recognize my phone in the yellow box (COM 5) but it doesn't have anything in the box above the yellow COM 5 box. (sorry for all the non-technical terms here).
My process is
1. Install Samsung drivers for 32 bit Windows 7 laptop (verified 32 bit...I've tried the wrong ones on a previous flash)
2. Install ODIN
3. Connect phone to laptop in DL Mode.
Everything is good except the damn drivers issue...bad link for the drivers perhaps??

If Odin says you are connected (yellow box), you should be able to flash. As long as your phone is in dl mode... The box above it fills up while Odin is performing the flashing operation
Sent from my SGH-T959V using XDA App

StonedYoda said:
I'm not able to get past the main bootup screen, so no-go on getting to the market. This is the first time I've had an issue flashing and it's been a few months since I've even wanted to switch ROM's since Valhalla Black worked so well for me.
I flashed the kernel, but still can't change the mount point for /system...tried to flash the ROM anyway cuz I'm a dumbass and still not able to boot. I'm trying to get into ODIN to revert back to a stock GB ROM, or any GB ROM for that matter...my laptop is telling me the drivers weren't installed correctly. ODIN seems to recognize my phone in the yellow box (COM 5) but it doesn't have anything in the box above the yellow COM 5 box. (sorry for all the non-technical terms here).
My process is
1. Install Samsung drivers for 32 bit Windows 7 laptop (verified 32 bit...I've tried the wrong ones on a previous flash)
2. Install ODIN
3. Connect phone to laptop in DL Mode.
Everything is good except the damn drivers issue...bad link for the drivers perhaps??
Click to expand...
Click to collapse
When ever you get into download mode, does windows tell you that the device malfunctioned?

BAleR said:
When ever you get into download mode, does windows tell you that the device malfunctioned?
Click to expand...
Click to collapse
Yes it does. It says it has malfunctioned and/or doesn't recognize the device....

I feel like I was SO close to an answer......crap....

StonedYoda said:
I feel like I was SO close to an answer......crap....
Click to expand...
Click to collapse
Download this. It has the drivers and Odin in it as well as stock KG4 (the PDA, Phone and CSC files). Just don't use the PIT file. That should sqaure you up...
http://forum.xda-developers.com/showthread.php?t=1183413&highlight=kg4

thomas.raines said:
Download this. It has the drivers and Odin in it as well as stock KG4 (the PDA, Phone and CSC files). Just don't use the PIT file. That should sqaure you up...
http://forum.xda-developers.com/showthread.php?t=1183413&highlight=kg4
Click to expand...
Click to collapse
THANK YOU SOOOOO MUCH!!!!!
Man I have been DYING!! HAHA...I now have a working phone again!! I guess now I just have to root it, but that's pretty simple if I remember correctly.
You and Raver are gonna be the 1st people I've donated to. Seriously, you guys rock!

StonedYoda said:
THANK YOU SOOOOO MUCH!!!!!
Man I have been DYING!! HAHA...I now have a working phone again!! I guess now I just have to root it, but that's pretty simple if I remember correctly.
You and Raver are gonna be the 1st people I've donated to. Seriously, you guys rock!
Click to expand...
Click to collapse
Well thank you. I'm just glad I could help. If you Odin one of the GB kernels that have voodoo, you won't have to root and CWM will be installed so you can just flash per the OP...
BTW, Raver is the man. He has helped me so much in my journey of learning...

thomas.raines said:
Well thank you. I'm just glad I could help. If you Odin one of the GB kernels that have voodoo, you won't have to root and CWM will be installed so you can just flash per the OP...
BTW, Raver is the man. He has helped me so much in my journey of learning...
Click to expand...
Click to collapse
Well now I have the same issue I had before...except this time my phone turns on. It is telling me that the drivers aren't installed correctly etc.....so I can't get ODIN to recognize the phone is even there AGAIN!! LOL...I'm trying to reinstall those same drivers but so far no luck...One step forward, 2 steps back haha...any last piece of advice?
---------- Post added at 10:55 PM ---------- Previous post was at 10:41 PM ----------
Nevermind!!! I GOT IT!!! I was able to get ODIN to pick up my phone again...I'm going with the KC1 bootloaders to KJ6 kernel after completely formatting my SD card...THEN to this hybrid Valhalla/CM7 I've been wanting to try ALL EFFING DAY LOL
Thanks again for your patience and help, thomas.raines...as soon as my VA benefits come in next week, you (and Raver, natch) will not be forgotten!! You saved my phone and my sanity, brotha.

i am new here and i am in big problem for my infuse 4g after install custom rom

i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.

If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.

Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only

huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse

huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548

Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.

huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.

huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app

Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.

One more HAPPY INFUSE OWNER.

Is this forum group great, or what!!!!!!

benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse

Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!

epic touch flashing

Im trying to figure all this out and do it safely. I guess I bricked my 1st phone blue light only no power? I'm hoping to NOT do it again :good: ... Not very easy to get help around these forums since most ppl think you should already know. Im on ff18 and root per Qbkings vid, agat 0.2.1. Im timid on flashing now due to the brick. I have flshed about 10 roms when i was on el29 and never had any problems until i tried to flash an ICS rom.
So if im on ff18 root agat can I just use the format all and flash safely. And also how do you know when your going between roms that you are doing it safe? I want to try a few out?
Gtalk or emial [email protected] for any help offered.
Thank you in advance

Even though there is custom recoveries for ics. Many of us still use the tried and true method by using the el26 kernel.
Also format all does not play well with ics. Just wipe caches and do a factory wipe.
Sent from my SPH-D710 using xda premium

gilbydakid said:
Even though there is custom recoveries for ics. Many of us still use the tried and true method by using the el26 kernel.
Also format all does not play well with ics. Just wipe caches and do a factory wipe.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Cool so stay away from the caulk format all?
I flashed gingerbread roms over and over, after a bit my restores wouldn't work , then went for the milestone rom and bricked... I was supposed to use el26 according to vid and I think I tried to do it using clockwork instead of Odin(was I supposed to use Odin)? The only time I've used Odin was to root when I was on el29 and to root after i got ff18 ota. So do you use Odin each time and install the 26 kernel each time I want to install a new rom to be safe? ( if so then cool but I want to make sure I understand ) do I also have to are install cwm each time ( like meaning a safe version of it )
Right now the few rooms I'm seeing that I would like to try is cm9, the universe rom, and I hear about the " goodness rom"?
OK, so heres situation I'm on agat 2.1 and ff18 . Out of those three can I just download the rom and flash one or do I need to go to the 26 kernel and then do it EVERYTIME to be safe? I was sent a link for a safe kernel and said to " use and flash "? That just doesnt make complete sense to me yet?
Any and all is soooooo appreciated! I'm going to get this figured out so I can be comfortable and pros like some of you! I m really looking forward to it and if anybody wants to help a bit you can hit my email and I will not try to just waste ur time lol...
Thank you
A guy who doesn't wanna be a noob 4ever

I used this
http://forum.xda-developers.com/showthread.php?t=1525495

jpeclf said:
Cool so stay away from the caulk format all?
I flashed gingerbread roms over and over, after a bit my restores wouldn't work , then went for the milestone rom and bricked... I was supposed to use el26 according to vid and I think I tried to do it using clockwork instead of Odin(was I supposed to use Odin)? The only time I've used Odin was to root when I was on el29 and to root after i got ff18 ota. So do you use Odin each time and install the 26 kernel each time I want to install a new rom to be safe? ( if so then cool but I want to make sure I understand ) do I also have to are install cwm each time ( like meaning a safe version of it )
Right now the few rooms I'm seeing that I would like to try is cm9, the universe rom, and I hear about the " goodness rom"?
OK, so heres situation I'm on agat 2.1 and ff18 . Out of those three can I just download the rom and flash one or do I need to go to the 26 kernel and then do it EVERYTIME to be safe? I was sent a link for a safe kernel and said to " use and flash "? That just doesnt make complete sense to me yet?
Any and all is soooooo appreciated! I'm going to get this figured out so I can be comfortable and pros like some of you! I m really looking forward to it and if anybody wants to help a bit you can hit my email and I will not try to just waste ur time lol...
Thank you
A guy who doesn't wanna be a noob 4ever
Click to expand...
Click to collapse
Sorry it took so long to get back, it got kind of hectic at work.
Here is my formula of flashing.
Odin el26- make sure it is in the pda slot.
Go into recovery. From there I wipe dalvik, cache, factory 3 times apiece. You don't have to do it that much, it just gives me piece of mind.
Flash rom from zip. Reboot. Then I flash my modem through Odin- make sure the modem bin file is in the phone slot.
Hit run wait for it to reboot and enjoy.
Also don't worry about asking me any questions unlike most of the xda members I'm not a prick that will tell you search and read.
I can read a calculus book until I'm blue in the face. Doesn't mean I'm going to know how to do calculus after unless I'm given some guidance.
My current setup is -
Cm9- 6/21 build from Chris g
Kernel- ff11
Modem- el29
Sent from my SPH-D710 using xda premium

Odin v1.81 will not see phone in download mode
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan
gilbydakid said:
Sorry it took so long to get back, it got kind of hectic at work.
Here is my formula of flashing.
Odin el26- make sure it is in the pda slot.
Go into recovery. From there I wipe dalvik, cache, factory 3 times apiece. You don't have to do it that much, it just gives me piece of mind.
Flash rom from zip. Reboot. Then I flash my modem through Odin- make sure the modem bin file is in the phone slot.
Hit run wait for it to reboot and enjoy.
Also don't worry about asking me any questions unlike most of the xda members I'm not a prick that will tell you search and read.
I can read a calculus book until I'm blue in the face. Doesn't mean I'm going to know how to do calculus after unless I'm given some guidance.
My current setup is -
Cm9- 6/21 build from Chris g
Kernel- ff11
Modem- el29
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse

doan_group said:
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan
Click to expand...
Click to collapse
http://hotfile.com/dl/145140482/1e58...Stock.zip.html el29 file
http://forums.acsyndicate.net/showthread.php? 2685-Odin-1-85-download-for-the-Epic-Touch-4G odin 1.85
http://www.youtube.com/watch? v=_vmEmheJnyg
Btw download mode is power and volume DOWN then once your there you press the up button you get into download mode before plugging in.
If odin doesnt recognize phone with yellow com ..try a different cable
hope it helps
Sent from my SPH-D710 using Tapatalk 2

doan_group said:
Hi,
my Epic4gTouch is currently on IMM761.FH13 and I want to go back to prerooted EL29.
I follow the instructions from this link by sfhub
http://forum.xda-developers.com/showthread.php?t=1409634
I downloaded and loaded Odin3Excution v1.81
a) Put my phone into download mode with power and volume up.
1) The software never recognized my phone and I get no yellow com port. My window 7 PC does recognize my phone even in download mode.
2) If I do the same thing for my wife's phone which is still on GB then it sees the com port, but not on the phone with ICS installed already.
I tried to search and see if people have the same issue and did not find anything. For those who have already downgraded from ICS to EL29
can you please tell me which software you use and how you did it.
Thank you,
-Doan[/QUOTE
Glad you got it fixed ... when you roll back you will probably start getting an OTA update that will annoy the S--T out of you as it did me! Use this method it easy and make sure to hit thanks for him ...this was a life saver!!!! http://forum.xda-developers.com/showthread.php?t=
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse