Database Info

Return Everything in stock for assitance?

Hello guys!
I have a Galaxy Sl i9003, rooted and modded.
I need to give it at assistance..how to return back to stock everything?
Thanks!

davibs said:
Hello guys!
I have a Galaxy Sl i9003, rooted and modded.
I need to give it at assistance..how to return back to stock everything?
Thanks!
Click to expand...
Click to collapse
Just flash a froyo or GB stock ROM via Odin...preferably froyo if it's more than year old...or u might have to explain how u got GB
Press thanks if that helped
Sent from my GT-I9003 using XDA

Do this if you want stock and no root at all.
Flash stock roms download here http://forum.xda-developers.com/showthread.php?t=1004647 choose any you want but we all here use XXKPQ or DDKP3 as base rom.
If you dont know how follow steps here
http://forum.xda-developers.com/showthread.php?t=1133787
Hope it helped. Press thanks

I9003XXKPE
Download: http://hotfile.com/dl/145780524/f7d1...XXKPE.zip.html
I9003XXKPQ (2.3.6)
Download : http://hotfile.com/dl/145857619/8242...Q_SER.zip.html (THANKS TO SINE)
1. Firstly, Download the 2.3.6 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPQ
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPQ_I9003XXKPQ_I9003SERKPQ_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPQ PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPQ
18. Factory reset and enjoy

Samsung Galaxy SL Flash problem?

Samsung Galaxy SL Flash problem?
i have put .pit file using odin now my mobile wont start.i rooted my Galaxy sl and was trying to flash a rom by using this thread http://forum.xda-developers.com/showthread.php?t=1004622 but after 7th step i don't know what to do so i restart my phone and it wont start.please help

jagwant said:
Samsung Galaxy SL Flash problem?
i have put .pit file using odin now my mobile wont start.i rooted my Galaxy sl and was trying to flash a rom by using this thread http://forum.xda-developers.com/showthread.php?t=1004622 but after 7th step i don't know what to do so i restart my phone and it wont start.please help
Click to expand...
Click to collapse
After 7th step just switch off phone by pulling out battery. Then go to download mode & then start from 8th step. It is as simple as that. Dont worry

vishal24387 said:
After 7th step just switch off phone by pulling out battery. Then go to download mode & then start from 8th step. It is as simple as that. Dont worry
Click to expand...
Click to collapse
i am from india and i don't know which files to load in CSC,PDA Bootloader Phone
http://forum.xda-developers.com/showthread.php?t=1707712 i have downloaded this rom
can i just start my phone without flashing a new rom please help

jagwant said:
i am from india and i don't know which files to load in CSC,PDA Bootloader Phone
http://forum.xda-developers.com/showthread.php?t=1707712 i have downloaded this rom
can i just start my phone without flashing a new rom please help
Click to expand...
Click to collapse
I am also from India. In india DDLF2 rom is latest official firmware. Download DDLF2 rom from here.
http://forum.xda-developers.com/showthread.php?t=1741370

vishal24387 said:
I am also from India. In india DDLF2 rom is latest official firmware. Download DDLF2 rom from here.
http://forum.xda-developers.com/showthread.php?t=1741370
Click to expand...
Click to collapse
what about CSC,PDA,Bootloader,Phone files are they included in this rom
is there any that i can just start my phone without flashing a new rom please help

Look buddy u have to understand flashing procedure in detail. First you have to download XXKPE rom. Download XXKPE rom from here.
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Download odin software from here
forum.xda-developers.com/attachment.php?attachmentid=1254464&d=1344665129
Now follow following procedure
1. Unzip XXKPE firmware zip file.
2. Run Odin software.
3. Check Re-Partition, Auto Reboot and F. Reset
Time.
4. Click PIT button and select this file:
latona_20110114.pit
5. Set it to download mode : Press Volume
down + OK first, then hold Power button.
6. Connect USB cable and the program will
detect the phone's Com number.
7. Click Start button to download the PIT file to
phone.
8. After it is Done Click on Reset button
[Partition box should be unchecked
automatically]
9. Click PDA button and select this file:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file:
MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this
file:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-
I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove
battery, insert battery and bring it back to
download mode. I have never been able to
bring it to download mode with usb plugged in.
14. Click Start button to flash these files to
phone.
15. Do not touch anything till you see PASS on
the program window.
16. Factory reset
Click to expand...
Click to collapse
Now when ur phone will start u can see that XXKPE rom is flashed on ur phone successfully.
Now next step is to flash DDLF2 rom. Unzip DDLF2 zip file. You will get I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5 file having size nearly 300-350 mb. So just turn off phone & go to download mode again. Run odin & select this .md5 file in pda option & then flash it. Thats it buddy. When ur phone will turn on you will observe DDLF2 rom is flashed on ur phone

vishal24387 said:
Look buddy u have to understand flashing procedure in detail. First you have to download XXKPE rom. Download XXKPE rom from here.
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Download odin software from here
forum.xda-developers.com/attachment.php?attachmentid=1254464&d=1344665129
Click to expand...
Click to collapse
after that

jagwant said:
after that
Click to expand...
Click to collapse
See above post. I have given all steps.

vishal24387 said:
See above post. I have given all steps.
Click to expand...
Click to collapse
thanks i will this rom next morning.
but i have flashed this rom http://forum.xda-developers.com/showthread.php?t=1707712
now my phone is stuck in rebooting loop

jagwant said:
thanks i will this rom next morning.
but i have flashed this rom http://forum.xda-developers.com/showthread.php?t=1707712
now my phone is stuck in rebooting loop
Click to expand...
Click to collapse
Dont worry just do what I have said buddy

vishal24387 said:
Look buddy u have to understand flashing procedure in detail. First you have to download XXKPE rom. Download XXKPE rom from here.
http://hotfile.com/dl/145780524/f7d1f45/I9003XXKPE.zip.html
Download odin software from here
forum.xda-developers.com/attachment.php?attachmentid=1254464&d=1344665129
Now follow following procedure
1. Unzip XXKPE firmware zip file.
2. Run Odin software.
3. Check Re-Partition, Auto Reboot and F. Reset
Time.
4. Click PIT button and select this file:
latona_20110114.pit
5. Set it to download mode : Press Volume
down + OK first, then hold Power button.
6. Connect USB cable and the program will
detect the phone's Com number.
7. Click Start button to download the PIT file to
phone.
8. After it is Done Click on Reset button
[Partition box should be unchecked
automatically]
9. Click PDA button and select this file:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click PHONE button and select this file:
MODEM_I9003XXKPE_REV_00_CL1041909.tar
11. Click BOOTLOADER button and select this
file:
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. Click CSC button and select this file: GT-
I9003-CSC-MULTI-OXAKPE.tar
13: You should unplug usb cable, remove
battery, insert battery and bring it back to
download mode. I have never been able to
bring it to download mode with usb plugged in.
14. Click Start button to flash these files to
phone.
15. Do not touch anything till you see PASS on
the program window.
16. Factory reset
Click to expand...
Click to collapse
Now when ur phone will start u can see that XXKPE rom is flashed on ur phone successfully.
Now next step is to flash DDLF2 rom. Unzip DDLF2 zip file. You will get I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5 file having size nearly 300-350 mb. So just turn off phone & go to download mode again. Run odin & select this .md5 file in pda option & then flash it. Thats it buddy. When ur phone will turn on you will observe DDLF2 rom is flashed on ur phone
Click to expand...
Click to collapse
i have done the same procedure on firnd's i9003, but next firmware was JPKPH[instead of DDLF2] 2.3.6,... with it's .tar.md5... now my friend is experiencing some cell signals drop, with call drop and sms sending fail..! any resolution for this..!!

[Q] Galaxy S i9003 stuck at boot loop!!

My Samsung Galaxy SL i9003 is bricked. My Phone enters into both Recovery and Download Mode. I have tried to flash phone with I9003XXKPQ as mentioned in steps given in Misledz's Thread http://forum.xda-developers.com/showthread.php?t=1133787 . But, its not working for me.
Can you suggest me what firmware should i try? I am new here so could anyone help me on this, Please?

Your phone's not bricked since you can still go to download mode.. go to download mode and flash a firmware the stock one
Sent from my GT-I9300 using xda premium

saywhatt said:
Your phone's not bricked since you can still go to download mode.. go to download mode and flash a firmware the stock one
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Which version of stock firmware would you suggest? I just want my Phone back to life.

amritunsung said:
Which version of stock firmware would you suggest? I just want my Phone back to life.
Click to expand...
Click to collapse
If you have read Misledz's thread thoroughly in the first place you should be ok...try XXKPE

wee2wee said:
If you have read Misledz's thread thoroughly in the first place you should be ok...try XXKPE
Click to expand...
Click to collapse
I have 1). Flashed with XXKPE including latona.pit file.. (Failed.. Still rebooting).
2). Flashed with XXKPE and then flashed with XXKPQ.. (Failed.. Still rebooting)

amritunsung said:
I have 1). Flashed with XXKPE including latona.pit file.. (Failed.. Still rebooting).
2). Flashed with XXKPE and then flashed with XXKPQ.. (Failed.. Still rebooting)
Click to expand...
Click to collapse
Set your phone to "download" mode, connect phone to computer..Run Odin3_v3.04...click "PIT" only, select "latona_20110114.pit" click start..after finished, phone will turn screen off..
Take out your battery and put it back after a few seconds, go to download mode again, start Odin3_v3.04,
1. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
2. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
3. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
4. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar ...click start..wait for it to finish...disconnect from computer..your phone will reboot itself
If you want to install new update/value pack, I used DDLF2(get it here: http://forum.xda-developers.com/showthread.php?t=1004647)...go to download mode, connect your phone to the computer,start Odin3_v3.04,select/click pda..look for the "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar"..click start..wait for it to finish...disconnect from computer..your phone will reboot itself...

wee2wee said:
Set your phone to "download" mode, connect phone to computer..Run Odin3_v3.04...click "PIT" only, select "latona_20110114.pit" click start..after finished, phone will turn screen off..
Take out your battery and put it back after a few seconds, go to download mode again, start Odin3_v3.04,
1. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
2. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
3. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
4. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar ...click start..wait for it to finish...disconnect from computer..your phone will reboot itself
If you want to install new update/value pack, I used DDLF2(get it here: http://forum.xda-developers.com/showthread.php?t=1004647)...go to download mode, connect your phone to the computer,start Odin3_v3.04,select/click pda..look for the "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar"..click start..wait for it to finish...disconnect from computer..your phone will reboot itself...
Click to expand...
Click to collapse
Did as you said, but same problem still exists. Is this due to any hardware problem? I have read from other users about it as it maybe a Motherboard issue.

Bootloader & PDA
I need to download PDA- CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar & BOOTLOADER- APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar but i m tired of searching these two files. plz can anyone give me the link to download these?

aurtho09 said:
I need to download PDA- CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar & BOOTLOADER- APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar but i m tired of searching these two files. plz can anyone give me the link to download these?
Click to expand...
Click to collapse
follow z3x site you will gat it .

[Q] Downgrade to DDLF2 from cm10A3

Hi, I am on cm10 alpha 3, and i want to go back to gingerbread ddlf2 value pack, as described in http://forum.xda-developers.com/showthread.php?t=2174127&highlight=odin.
I gone to download mode, and flash latona_20110114.pit file in pit in odin, and when odin finished, phone can't start, just show black screen (little brighter then when is off). After removing battery i managed to go to download mode, but don't know now what. Can pleas someone help me!

osamslova said:
Hi, I am on cm10 alpha 3, and i want to go back to gingerbread ddlf2 value pack, as described in http://forum.xda-developers.com/showthread.php?t=2174127&highlight=odin.
I gone to download mode, and flash latona_20110114.pit file in pit in odin, and when odin finished, phone can't start, just show black screen (little brighter then when is off). After removing battery i managed to go to download mode, but don't know now what. Can pleas someone help me!
Click to expand...
Click to collapse
This is how you do it. go make some hot coffee, a pack of cigarette if you smoke, and some cookies and then do the following:
1. get the firmware ready. it is advisable using XXKPE as base.
2. run Odin3 v1.83
3. click Re-Partition, Auto Reboot and F. Reset Time.
4. press PIT and choose file: latona_20110114.pit
5. on your phone; go to download mode : press Volume down + Home (middle button), and power. (hold until you saw the green robot )
6. connect USB cable to your SL, wait until its connected you can check it in Odin.
7. click start
8. when its done, press reset [Partition box will automatically not selected] your SL will go blank (its ok its normal)
9. pull your SL from cable, open its battery, put it on again, and go back to download mode like on step #5 and reconnect is cable to SL until connected.
10. press BOOTLOADER choose file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
11. press PDA, choose file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. press PHONE, choose file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
13. click CSC choose file: GT-I9003-CSC-MULTI-OXAKPE.tar
14. click start
15. dont touch anything until its done. (its a perfect time to drink that coffee & eat some cookies while you wait)
16. if its done your SL will reboot by itself and start the first boot.
17. do a Factory reset by pressing *2767*3855#
18. most FW GB needed to be flashed at least twice. so you need to flash it again. all you need to do just repeat step 10 -16, for the second flash, there is no need to flash latona_20110114.pit again.
19. after your XXKPE up and running. turn it off again. go to download mode & flash DDLF2 you only need to put DDLF2 file into PDA and click start to update from XXKPE to DDLF2 no need to flash bootloader/phone/csc again.
20. after its done. your SL will automatically rebooted again into DDLF2
Enjoy! cheers. simple thanks wont hurt! :good:
WARNING!!: Re-Partition only selected during latona.pit. if you got into step No.9, make sure Re-Partition not selected. :victory:

Working CWM Recovery For Galaxy Core GT-I8262

Download Links :
STOCK RECOVERY : http://www.mediafire.com/?531dq5mi794dki8
CWM : http://www40.zippyshare.com/v/48874900/file.html
ODIN 3.07 : http://www.mediafire.com/download/77...x2/Odin307.zip
Galaxy Core Drivers :http://developer.samsung.com/board/d...hId=0000000001
INSTRUCTIONS :
1. Install the Galaxy Core Drivers On Your Desktop
2. Extract ODIN.zip on your Desktop
3. Copy Recovery.tar File In ODIN Folder(its preferable to keep them in the same directory)
4. Now Go To Your Phone Settings
5. Click On Developer Options & Tick USB Debugging
6. Turn Off Your Phone
7. After Your Mobile Is Completely Turned Off Go Into Downloading Mode - Press & Hold Volume Down +Home Key +Power Key, Press Volume Up Again To Proceed
8. Connect Your Phone To Your PC via USB Cable
9. Now Open ODIN 3.07
10. Your Phone Should Be Detected In ODIN If You Have Installed The Drivers Correctly
11. Now Click On The PDA Button Then Select recovery.tar(CWM Recovery File)
12. Press The Start Button. Now The Installation Should Start.
13. When The Installation Is Completed It Should Display "PASS" Then Remove The USB Cable From Your Device
14. Now To Go Into CWM Recovery - Turn Off Your Phone Completely.
15. Press Power Button + Home Button + Volume Down Button.
16. Now You Have A CWM Recovery!!!!!!!!!!!!!!
If It Helped HIT the "THANKS" button!!!

NEW CWM
Pls test it people : http://www.mediafire.com/download/74r42yonfxcf7m0/CWM_for_Galaxy_Core.zip

HI tested the cwm recovery .... its working fine...... except minor graphical glitches while traversing folders.... Thanx a lot

sri10 said:
HI tested the cwm recovery .... its working fine...... except minor graphical glitches while traversing folders.... Thanx a lot
Click to expand...
Click to collapse
When i press vol down + menu + power the phone goes into download mode..
and when i press vol up + menu + power the phone goes into stock recovery mode..
i have flashed cwm recovery through odin and followed the steps .. am i missing out on something?

working fine... just a small grphic...glitches
i will test the new test version
---------- Post added at 05:19 PM ---------- Previous post was at 04:44 PM ----------
manas_dev said:
Pls test it people : http://www.mediafire.com/download/74r42yonfxcf7m0/CWM_for_Galaxy_Core.zip
Click to expand...
Click to collapse
just test it...
my phone goes blank..
flash again with the old one...from odin
now just working again

thesdony said:
working fine... just a small grphic...glitches
i will test the new test version
---------- Post added at 05:19 PM ---------- Previous post was at 04:44 PM ----------
just test it...
my phone goes blank..
flash again with the old one...from odin
now just working again
Click to expand...
Click to collapse
Ok that means the second one doesnt work
Sent from my GT-S5360 using Tapatalk 2

siddhesh1609 said:
When i press vol down + menu + power the phone goes into download mode..
and when i press vol up + menu + power the phone goes into stock recovery mode..
i have flashed cwm recovery through odin and followed the steps .. am i missing out on something?
Click to expand...
Click to collapse
Bump.. Any suggestions?

does this work on i8260?

siddhesh1609 said:
Bump.. Any suggestions?
Click to expand...
Click to collapse
Have same problem. Any help here?

samtani776 said:
Have same problem. Any help here?
Click to expand...
Click to collapse
There r 2 files use the cwm one.. that worked for me later when i installed stock firmware again and flashed cwm recovery and it worked..
Just remember to press volume up + menu+ power till screen shows up..

Have you tried? I kinda need a recovery and a ROM for this device.

cwm not working
showed PASS in odin and still landing into stock recovery..? what is the problem?