Database Info

Phone restarts and hangs on logo!!

Hello, i flashed I9003XXKPQ_SERKPQ_Android_2.3.6 which is a single PDA file with re-partition and pit...now my phone restarts continuously and hangs on logo. Original PDA of the phone is i9003JPKPE android 2.3.6. I read somewhere to flash this phone with kpe which is all 4 files. I downloaded this file from tsar3000 site but it is only single PDA file...
Someone out there please help

andrew21 said:
Hello, i flashed I9003XXKPQ_SERKPQ_Android_2.3.6 which is a single PDA file with re-partition and pit...now my phone restarts continuously and hangs on logo. Original PDA of the phone is i9003JPKPE android 2.3.6. I read somewhere to flash this phone with kpe which is all 4 files. I downloaded this file from tsar3000 site but it is only single PDA file...
Someone out there please help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=22750786
Download xxkpq and xxkpe from this thread.
First flash with pit file with re partition checked.
Then flash xxkpe twice with re-partition unchecked.
Then flash xxkpq..
Do factory reset between each flash..
send from gt-i9003 using android keyboard

try another kernel!
hey,
i had the same problem.
try to use another kernel!

sirilpta said:
http://forum.xda-developers.com/showthread.php?p=22750786
Download xxkpq and xxkpe from this thread.
First flash with pit file with re partition checked.
Then flash xxkpe twice with re-partition unchecked.
Then flash xxkpq..
Do factory reset between each flash..
send from gt-i9003 using android keyboard
Click to expand...
Click to collapse
WHich file to flash first with pit file and repartition?

I checked the deposit file link...it gives only xxkpq for download....where do i download xxkpe from?
thanks for your help

andrew21 said:
I checked the deposit file link...it gives only xxkpq for download....where do i download xxkpe from?
thanks for your help
Click to expand...
Click to collapse
The link he gave you is for a xxkpq with 4 files.Flash all those files through odin and you wont need xxkpe.
On the other hand if you still want to install kpe first then go here
http://forum.xda-developers.com/showthread.php?t=1004647
and download from the hotfile link given and flash the 4 files
then flash only xxkpq without repartition

devilhell007 said:
The link he gave you is for a xxkpq with 4 files.Flash all those files through odin and you wont need xxkpe.
On the other hand if you still want to install kpe first then go here
http://forum.xda-developers.com/showthread.php?t=1004647
and download from the hotfile link given and flash the 4 files
then flash only xxkpq without repartition
Click to expand...
Click to collapse
Guess what i flashed 4 files with xxkpq and phone is alive and working again.....thanks!!

andrew21 said:
Hello, i flashed I9003XXKPQ_SERKPQ_Android_2.3.6 which is a single PDA file with re-partition and pit...now my phone restarts continuously and hangs on logo. Original PDA of the phone is i9003JPKPE android 2.3.6. I read somewhere to flash this phone with kpe which is all 4 files. I downloaded this file from tsar3000 site but it is only single PDA file...
Someone out there please help
Click to expand...
Click to collapse
andrew21 said:
Guess what i flashed 4 files with xxkpq and phone is alive and working again.....thanks!!
Click to expand...
Click to collapse
good to hear. fyi for the future, only select repartition when using the pit file, and only do the pit file by itself. do not repartition just for pda, and do not combine pit with anything else when flashing.
since you happen to be one of the first "guinea pigs" for flashing the new set of files for KPQ, please leave feedback later

Galaxy S GT-i9003 Flashing to JPKPC
I'm in the UAE and have a Galaxy S GT-i9003 and I decided to flash to I9003JPKPH_I9003OJPKPC_XSG firmware.
I chose to follow these instructions: http://forum.xda-developers.com/showthread.php?t=1004622
I downloaded Odin and all the relevant files but I stupidly failed to read ahead and flashed with the .PIT file when it was unnecessary.
I then tried to flash with the I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 file in the PDA slot with Repartition unchecked.
My phone will not start, it just loops through the startup screens.
What is the best thing for me to do now? I still want to flash to I9003JPKPH_I9003OJPKPC_XSG.
PLEASE HELP!!!

AzeemMobile said:
I'm in the UAE and have a Galaxy S GT-i9003 and I decided to flash to I9003JPKPH_I9003OJPKPC_XSG firmware.
I chose to follow these instructions: http://forum.xda-developers.com/showthread.php?t=1004622
I downloaded Odin and all the relevant files but I stupidly failed to read ahead and flashed with the .PIT file when it was unnecessary.
I then tried to flash with the I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 file in the PDA slot with Repartition unchecked.
My phone will not start, it just loops through the startup screens.
What is the best thing for me to do now? I still want to flash to I9003JPKPH_I9003OJPKPC_XSG.
PLEASE HELP!!!
Click to expand...
Click to collapse
you could follow these steps mentioned here..
http://forum.xda-developers.com/showthread.php?t=1133787

AzeemMobile said:
I'm in the UAE and have a Galaxy S GT-i9003 and I decided to flash to I9003JPKPH_I9003OJPKPC_XSG firmware.
I chose to follow these instructions: http://forum.xda-developers.com/showthread.php?t=1004622
I downloaded Odin and all the relevant files but I stupidly failed to read ahead and flashed with the .PIT file when it was unnecessary.
I then tried to flash with the I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5 file in the PDA slot with Repartition unchecked.
My phone will not start, it just loops through the startup screens.
What is the best thing for me to do now? I still want to flash to I9003JPKPH_I9003OJPKPC_XSG.
PLEASE HELP!!!
Click to expand...
Click to collapse
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003JPKPH
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install JPKPH.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5" in your PDA and flash.
U are now on JPKPH.

pranshah said:
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003JPKPH
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install JPKPH.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003JPKPH_I9003OJPKPC_I9003JXKP3_HOME.tar.md5" in your PDA and flash.
U are now on JPKPH.
Click to expand...
Click to collapse
Please inform is it applicable to all the I9003 users, since I am facing the same problem.

tricker_me said:
Please inform is it applicable to all the I9003 users, since I am facing the same problem.
Click to expand...
Click to collapse
I have not checked with other FW, but as far as I believe, it will be applicable to all I9003 users.

Yes. It is applicable to all sl users
Sent from my GT-I9003 using xda premium

i am having the same problem
I tried to update the firmware of two i9003 via KIES.
One succeed but another keeps restarting.
Then I have flashed several offical roms, flashed XXKPE twice but still stop at samsung logo.
what else can I do to save the phone??
When I wipe data in recovery mode there is an error:E:format_volume: rfs format failed on /dev/block/mmcblk0p3.
And before I update the firmware, when I took a photo, the photo disappear after restarting the phone.
Do these related to the problem?

When you flash the kpe, did you flash the pit file first before flashing the 4 file?
Sent from my GT-I9003 using xda premium

icephatom said:
When you flash the kpe, did you flash the pit file first before flashing the 4 file?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
yes i did.
first I wiped data and cache.
I flashed pit file with re-partition.
then flashed those 4 files without re-partition.
and waited until the phone went to recovery mode automatically.
wiped data and cache.
Then took out the battery to turn off the phone and put it back.
and flashed 4 files again.
Was I doing anything wrong

You cleared data and cache and let it startup fully before you pull out battery?
Sent from my GT-I9003 using xda premium

yes
but the error E:format_volume: rfs format failed on /dev/block/mmcblk0p3 appeared

i to had the same problem
just did a clean flash and used Amit bagaria's Universal root
:laugh:

Return Everything in stock for assitance?

Hello guys!
I have a Galaxy Sl i9003, rooted and modded.
I need to give it at assistance..how to return back to stock everything?
Thanks!

davibs said:
Hello guys!
I have a Galaxy Sl i9003, rooted and modded.
I need to give it at assistance..how to return back to stock everything?
Thanks!
Click to expand...
Click to collapse
Just flash a froyo or GB stock ROM via Odin...preferably froyo if it's more than year old...or u might have to explain how u got GB
Press thanks if that helped
Sent from my GT-I9003 using XDA

Do this if you want stock and no root at all.
Flash stock roms download here http://forum.xda-developers.com/showthread.php?t=1004647 choose any you want but we all here use XXKPQ or DDKP3 as base rom.
If you dont know how follow steps here
http://forum.xda-developers.com/showthread.php?t=1133787
Hope it helped. Press thanks

I9003XXKPE
Download: http://hotfile.com/dl/145780524/f7d1...XXKPE.zip.html
I9003XXKPQ (2.3.6)
Download : http://hotfile.com/dl/145857619/8242...Q_SER.zip.html (THANKS TO SINE)
1. Firstly, Download the 2.3.6 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPQ
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPQ_I9003XXKPQ_I9003SERKPQ_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPQ PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPQ
18. Factory reset and enjoy

Unable to install LF2

Hello friends,
I had been running LF2 for the past few months successfully but i had installed Frankenstein's Mod which i did not prefer over stock due to stability issues. Now when i reflashed LF2 with the PIT file, My device doesnt boot up and keeps restarting after showing the Samsung page. I had to install XXKPQ which is Serbian i suppose to successfully recover my device and it updated to LE4 via Kies.
I am having stability issues now with LE4 and extremely poor battery life.
Please can anybody guide me how do i get back my LF2 again so please tell me which ROM should i Flash before
Thank you!

ronak_143 said:
Hello friends,
I had been running LF2 for the past few months successfully but i had installed Frankenstein's Mod which i did not prefer over stock due to stability issues. Now when i reflashed LF2 with the PIT file, My device doesnt boot up and keeps restarting after showing the Samsung page. I had to install XXKPQ which is Serbian i suppose to successfully recover my device and it updated to LE4 via Kies.
I am having stability issues now with LE4 and extremely poor battery life.
Please can anybody guide me how do i get back my LF2 again so please tell me which ROM should i Flash before
Thank you!
Click to expand...
Click to collapse
If you want stability and battery life, perhaps XXKPQ is for you.. the best ROM in my opinion is XXKPQ and JPKPH
Sent from my GT-I9100 using xda premium

Ok guys i've found out the solution for those who want their default indian roms in their devices
DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily

ronak_143 said:
Ok guys i've found out the solution for those who want their default indian roms in their devices
DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily
Click to expand...
Click to collapse
That's great that you found it!
Sent from my GT-I9100 using xda premium

saywhatt said:
That's great that you found it!
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Alas, it failed though. It does a factory reset every time i restart the phone Any suggestions how to repair this now

ronak_143 said:
Alas, it failed though. It does a factory reset every time i restart the phone Any suggestions how to repair this now
Click to expand...
Click to collapse
I think you need a clean install from scratch.
Here the guides on how to --> http://forum.xda-developers.com/showthread.php?t=1133787

ronak_143 said:
Ok guys i've found out the solution for those who want their default indian roms in their devices
DDKP1 with PIT->then DDKP3 with PIT->Install BAM kernel then connect to KIES to get LF2 easily
Click to expand...
Click to collapse
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003DDLF2 (http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html)
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install DDLF2.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" in your PDA and flash.
U are now on DDLF2.

pranshah said:
You will need following before beginning installation:
1) Flsher Program + PIT (ODIN3 + Latona.PIT)
2) Firmware: I9003XXKPE
3) Firmware: I9003DDLF2 (http://www.hotfile.com/dl/161660941/8fd61ef/I9003DDLF2_I9003ODDLF2_INU.zip.html)
STEPS:
1) Open ODIN. Connect ur phone in download mode. just flash Latona.PIT file with Re-Partition selected.
2) Once flashed, Ur phone will reboot automatically but will show only black screen with background light. Do not worry. Open the back cover, remove the battery, insert battery and boot again in download mode.
3) Close ODIN. Open it again. Now we will be installing XXKPE.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Select "APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in bootloader.
iii) Select "CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5" in PDA.
iv) Select "MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5" in PHONE.
v) Select "GT-I9003-CSC-MULTI-OXAKPE.tar.md5" in CSC.
Now flash it.
this will successfully install XXKPE on ur device. Once your flash is complete, ur device will boot and will ask for initial config. U can set it or just power off ur device and boot again in download mode.
Now will install DDLF2.
i) Select Latona.PIT File in ODIN. (Make sure the "Re-Partition" is unchecked once you have selected PIT file)
ii) Just select "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5" in your PDA and flash.
U are now on DDLF2.
Click to expand...
Click to collapse
Works perfectly Thank you!

[Q] Galaxy S i9003 stuck at boot loop!!

My Samsung Galaxy SL i9003 is bricked. My Phone enters into both Recovery and Download Mode. I have tried to flash phone with I9003XXKPQ as mentioned in steps given in Misledz's Thread http://forum.xda-developers.com/showthread.php?t=1133787 . But, its not working for me.
Can you suggest me what firmware should i try? I am new here so could anyone help me on this, Please?

Your phone's not bricked since you can still go to download mode.. go to download mode and flash a firmware the stock one
Sent from my GT-I9300 using xda premium

saywhatt said:
Your phone's not bricked since you can still go to download mode.. go to download mode and flash a firmware the stock one
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Which version of stock firmware would you suggest? I just want my Phone back to life.

amritunsung said:
Which version of stock firmware would you suggest? I just want my Phone back to life.
Click to expand...
Click to collapse
If you have read Misledz's thread thoroughly in the first place you should be ok...try XXKPE

wee2wee said:
If you have read Misledz's thread thoroughly in the first place you should be ok...try XXKPE
Click to expand...
Click to collapse
I have 1). Flashed with XXKPE including latona.pit file.. (Failed.. Still rebooting).
2). Flashed with XXKPE and then flashed with XXKPQ.. (Failed.. Still rebooting)

amritunsung said:
I have 1). Flashed with XXKPE including latona.pit file.. (Failed.. Still rebooting).
2). Flashed with XXKPE and then flashed with XXKPQ.. (Failed.. Still rebooting)
Click to expand...
Click to collapse
Set your phone to "download" mode, connect phone to computer..Run Odin3_v3.04...click "PIT" only, select "latona_20110114.pit" click start..after finished, phone will turn screen off..
Take out your battery and put it back after a few seconds, go to download mode again, start Odin3_v3.04,
1. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
2. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
3. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
4. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar ...click start..wait for it to finish...disconnect from computer..your phone will reboot itself
If you want to install new update/value pack, I used DDLF2(get it here: http://forum.xda-developers.com/showthread.php?t=1004647)...go to download mode, connect your phone to the computer,start Odin3_v3.04,select/click pda..look for the "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar"..click start..wait for it to finish...disconnect from computer..your phone will reboot itself...

wee2wee said:
Set your phone to "download" mode, connect phone to computer..Run Odin3_v3.04...click "PIT" only, select "latona_20110114.pit" click start..after finished, phone will turn screen off..
Take out your battery and put it back after a few seconds, go to download mode again, start Odin3_v3.04,
1. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
2. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
3. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
4. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar ...click start..wait for it to finish...disconnect from computer..your phone will reboot itself
If you want to install new update/value pack, I used DDLF2(get it here: http://forum.xda-developers.com/showthread.php?t=1004647)...go to download mode, connect your phone to the computer,start Odin3_v3.04,select/click pda..look for the "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar"..click start..wait for it to finish...disconnect from computer..your phone will reboot itself...
Click to expand...
Click to collapse
Did as you said, but same problem still exists. Is this due to any hardware problem? I have read from other users about it as it maybe a Motherboard issue.

Bootloader & PDA
I need to download PDA- CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar & BOOTLOADER- APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar but i m tired of searching these two files. plz can anyone give me the link to download these?

aurtho09 said:
I need to download PDA- CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar & BOOTLOADER- APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar but i m tired of searching these two files. plz can anyone give me the link to download these?
Click to expand...
Click to collapse
follow z3x site you will gat it .

[Q] Downgrade to DDLF2 from cm10A3

Hi, I am on cm10 alpha 3, and i want to go back to gingerbread ddlf2 value pack, as described in http://forum.xda-developers.com/showthread.php?t=2174127&highlight=odin.
I gone to download mode, and flash latona_20110114.pit file in pit in odin, and when odin finished, phone can't start, just show black screen (little brighter then when is off). After removing battery i managed to go to download mode, but don't know now what. Can pleas someone help me!

osamslova said:
Hi, I am on cm10 alpha 3, and i want to go back to gingerbread ddlf2 value pack, as described in http://forum.xda-developers.com/showthread.php?t=2174127&highlight=odin.
I gone to download mode, and flash latona_20110114.pit file in pit in odin, and when odin finished, phone can't start, just show black screen (little brighter then when is off). After removing battery i managed to go to download mode, but don't know now what. Can pleas someone help me!
Click to expand...
Click to collapse
This is how you do it. go make some hot coffee, a pack of cigarette if you smoke, and some cookies and then do the following:
1. get the firmware ready. it is advisable using XXKPE as base.
2. run Odin3 v1.83
3. click Re-Partition, Auto Reboot and F. Reset Time.
4. press PIT and choose file: latona_20110114.pit
5. on your phone; go to download mode : press Volume down + Home (middle button), and power. (hold until you saw the green robot )
6. connect USB cable to your SL, wait until its connected you can check it in Odin.
7. click start
8. when its done, press reset [Partition box will automatically not selected] your SL will go blank (its ok its normal)
9. pull your SL from cable, open its battery, put it on again, and go back to download mode like on step #5 and reconnect is cable to SL until connected.
10. press BOOTLOADER choose file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
11. press PDA, choose file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
12. press PHONE, choose file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
13. click CSC choose file: GT-I9003-CSC-MULTI-OXAKPE.tar
14. click start
15. dont touch anything until its done. (its a perfect time to drink that coffee & eat some cookies while you wait)
16. if its done your SL will reboot by itself and start the first boot.
17. do a Factory reset by pressing *2767*3855#
18. most FW GB needed to be flashed at least twice. so you need to flash it again. all you need to do just repeat step 10 -16, for the second flash, there is no need to flash latona_20110114.pit again.
19. after your XXKPE up and running. turn it off again. go to download mode & flash DDLF2 you only need to put DDLF2 file into PDA and click start to update from XXKPE to DDLF2 no need to flash bootloader/phone/csc again.
20. after its done. your SL will automatically rebooted again into DDLF2
Enjoy! cheers. simple thanks wont hurt! :good:
WARNING!!: Re-Partition only selected during latona.pit. if you got into step No.9, make sure Re-Partition not selected. :victory: