I put my TMobile SIM into my D2G and it doesn't prompt me for an unlock code upon booting. Also, I've seen some websites saying "enter 74663# menu menu". Do I do this in the dial screen to access and unlock menu? Or is there some other way?
Thanks, guys.
Did you switch the phone to GSM mode?
The SIM network unlock PIN request dialog can be accessed by dialing #073887*. I would recommend first checking if the phone is locked at all.
Make sure you are on stock rom and you have switched to GSM mode as GY suggested. Some custom roms have subsidy unlock dialog broken.
Sent from my XT860 using Tapatalk
Related
For personal reasons, i decided to relock the boot loader from my Moto G, i did it successfully by using the commands "fastboot oem lock begin" and "fastboot oem lock".
Now the phone says: "Device is LOCKED. Status code: 2".
But there is a problem: The "Your boot loader is unlocked" white screen still shows up when i boot up the phone.
I believe that since the boot loader is now locked, the message should disappear. But it didn't.
So, any ideas on how to get the motorola logo back?
http://forum.xda-developers.com/showthread.php?t=2548530
Sent from my Moto G :3
I'd rather say : [APP] MotoG Boot Logo Creator + Flasher
http://forum.xda-developers.com/showthread.php?t=26373621
Is my phone really locked?
About this "Status Code 2"... what does it mean?
And, is the device really locked?
If it is, then the boot loader will only allow me to flash stock roms right?
It's just here to let dev/tech support your current phone status.
Status 0: BL Locked (never touched)
Status 3: BL Unlocked
Status 2: BL Locked (should be relocked, BL was unlocked and then relocked)
goldisingh57 said:
Go to Settings > Sound and you can turn Vibrate on touch off under Keys. You can also turn off Vibrate when ringing. You can also go to Settings > Language & input > Google Keyboard Settings and turn Vibrate on key press off.
Try putting a case on your Moto G, some cases will reduce or completely prevent the rattle.
You could open up the back cover and put a small piece of paper or tape in the space between the buttons and the back cover. This should prevent any excessive rattling.
Click to expand...
Click to collapse
I think u r missing the point,he is talking about the boot screen message which one gets when he unlock phones boot-loader ( which says your phone boot is unlocked now and you are now out of warranty )
I don't think, there is a way back as far i remember Motorola uses software based hard fuses for this and once its blown up there is no way to undo it, i might be wrong but i am sure i read it when i was researching about this phone before buying it.
Hi All
I am using one plus one with cm 13. I forgot the pattern to unlock. Is there any way to unlock the pattern and login to the phone.
I tried to copy the data but I am not able to copy since the screen is locked.
I have tried to lock using Android Device Manager but that is also asking for pattern to enter the password.
Since I have not enabled the developer mode .. I am not able to use adb commands also ...
I am able to use the fastboot mode, but from that mode, I am not getting any option to unlock ..
Can you pls help to unlock the phone or copy the data before doing factory reset..
Thanks
I bought Zte Z988 Cricket Wireless which have network lock, i ordered the unlock code, they send me, but im facing problem because phone showing (THIS DEVICE IS NETWORK LOCKED.YOU STILL HAVE 0 TIMES TO UNLOCK THE DEVICE.) so when i type the code the ok button doesn't highlight may be because of too many wrong code which the previous owner typed,i contact the network unlock re seller , he gave me two option to Reset Network setting or to install latest firmware,i did the network resetting but it doesn't work, the second option i cant find the firmware anywhere, please i need your help if there is anyway to reset the network unlock counter to any number or to help me with the firmware plssss, i attach the phone screenshot before typing the code and after typing the code, phone model ZTE Z988 From cricket Network
jamil1982 said:
I bought Zte Z988 Cricket Wireless which have network lock, i ordered the unlock code, they send me, but im facing problem because phone showing (THIS DEVICE IS NETWORK LOCKED.YOU STILL HAVE 0 TIMES TO UNLOCK THE DEVICE.) so when i type the code the ok button doesn't highlight may be because of too many wrong code which the previous owner typed,i contact the network unlock re seller , he gave me two option to Reset Network setting or to install latest firmware,i did the network resetting but it doesn't work, the second option i cant find the firmware anywhere, please i need your help if there is anyway to reset the network unlock counter to any number or to help me with the firmware plssss, i attach the phone screenshot before typing the code and after typing the code, phone model ZTE Z988 From cricket Network
Click to expand...
Click to collapse
He network code is a something i can't help with, but you have other options (working chance is less than 50%), your first option is to try to hard reset it using recovery, you boot into recovery by holding the (power+volume up+home) while your phone is off, or by holding (power+volume up) in case you don't have home button.
Your second option is to reflash the stock firmware, which was recommended by the network unlock re seller.
MigoMujahid said:
He network code is a something i can't help with, but you have other options (working chance is less than 50%), your first option is to try to hard reset it using recovery, you boot into recovery by holding the (power+volume up+home) while your phone is off, or by holding (power+volume up) in case you don't have home button.
Your second option is to reflash the stock firmware, which was recommended by the network unlock re seller.
Click to expand...
Click to collapse
I have the Network unlock code Already, and i have done the resetting through settings i think its the same with the Volume Buttuns but never the less i will wipe it through the Recovery and see, i will be very greatfull if u can help me with the firmware link, Almost a week im googling but cant find the firmware
please can anyone help me with the firmware?
What was your ZTE Z988 network unlock code?
aight, so in my phone settings I am able to toggle the "OEM unlocking" I then ran the command "fastboot oem get_unlock_data" and I got these numbers: 3A55651301693678#5A593232374E32515358006D6F746F207A340000#2D4A54EDF01DEE17D9D801B3519F22685E90D8F8#342AE0BD000000000000000000000000
I entered the numbers into Motorola's checker and it said 2 times " If the Device ID you entered is valid, you will see a Request Unlock Key button. " I in fact saw the button, I click on it and then it redirected me to a page saying "Phone blocked This device is not eligible for bootloader unlock." I don't understand this, I am able to toggle the setting in my phone.
perhaps there is a different way to get the unlock key?
any help is greatly appreciated!
@Villagerjj Any luck with this? I'm in the same boat.
Noob here. I made an account just for this, but my phone is just refusing to give me that OEM unlock option.
I heard somewhere that the reason is that the KG state is prenormal, and to get it out you need to wait 7 days connected to the Internet and with a SIM card inserted.
And I don't have any SIM card, can't get one as well. I probably could if I didn't have to activate it. (which is also a question for me)
So is there any way to just bypass this SIM requirement? I would also want a 7-day bypass so I don't have to wait, but that's fine.
And this phone also can't get in download mode, like another thread on here. Just "Entering fastboot mode" red on black.
So, Instructions on fix? I know I just wrote an essay for this, and I WOULD show you a photo, but that error....
Update: KG STATUS is now COMPLETED in download mode. Yet still the option is missing....
Randomusername0345 said:
my phone is just refusing to give me that OEM unlock option.
Click to expand...
Click to collapse
If you figure out how to get the A32-5G (mine is SM326U) unlock option to show up in the Developer options, please let me know as I can't get my OEM unlock option to show up (grayed out or not).
Randomusername0345 said:
And this phone also can't get in download mode, like another thread on here. Just "Entering fastboot mode" red on black.
Click to expand...
Click to collapse
Recently I wrote up how I got mine into Download Mode, among others.
How to un-freeze an unresponsive Samsung Galaxy A32 5G with reboot, reset, factory reset, odin mode, download mode, android recovery mode & debug mode