Database Info

Problem with BroodRom Configurator

Hello, this is my first post and, first of all, I'd like to give a big THANK YOU to the BroodROM developer. I got my Samsung Galaxy S Plus a week ago and, after reading a lot, I decided to flash this rom. Everything's working perfect (performance, battery, etc.) and I tried to to tune up the rom through Configurator Beta 3.
I have an issue with the Configurator (no matter wich version). I plug the phone to usb port, choose the "Connect computer" button on phone's screen and run the configurator. Click on Authenticate but it hangs and do nothing. I tried to run with the /nocheck parameter and I started the Configurator but no option worked.
I don't know if it's related but when I tried to run the bat file for the "battery tweak" it didn't work. I plug the phone to the same Usb port where I flashed the rom with Odin.
Hope anyone could help me to be able to run the Configurator. I'm not sure if I do all the correct steps when I connect the phone to computer. I got it in "massive storage" option and debugging mode checked. Thanks in advance.

Hello,
Could someone give me some help? Thanks again.

I have exacly the same problem.

try to check ur USB debugging in ur phone setting. Setting - application - development & check USB debugging. then try reconnect again to ur pc.

Is broodrom still alive for the newer devices?
I used to enjoy it alot, was always fast and reliable.

Need Stock Rom

I want to flash stock rom 2.2.1 indian firmware back on my samsung galaxy fit as it is unable to connect to my computer and laptop...my mobile charges but no usb data connection(comp shows a message usb device not recognized) .....result of my little experiment( i suppose.. it is)....Since i am unable to connect ..how can i use odin???( used before when all was well)....
in xda forums i read about converting .tar file(of stock rom) in cwm flashable zip is possible through Android Kitchen,,,,but i dont want to take any risk by creating anything as i haven't created anything before....
PLEASE I AM ASKING FOR HELP ANY DEV/MEMBER WILLING TO guide or making a flashable zip...
I read threads on adb ,, terminal emulator ,,converting of .tar into .zip files,,, and i dont want to take any type of risk AND BY FLASHING STOCK ROM I WILL ABLE TO TAKE TO SAMSUNG SERVICE CENTER TO FIX USB DATA CONNECTION PROBLEM (they will charge me more if they see jellybean in galaxy fit for flashing stock rom)....
HHUGE THNX IN ADVANCE..:crying:

Did u use odin without booting into download mode!!!

MajinSaiyan4 said:
Did u use odin without booting into download mode!!!
Click to expand...
Click to collapse
I used odin to flash 2.3.6 firmware in download mode and it installed successfully, i wanted my mobile to connect to external storage device(i.e. pen drive) so i made a cable myself and also attache charger power source to that cable(hoping it would work.e. mount & read pendrive) ..After that my mobile wouldn't cnnect to my comp or laptop via usb data cable....it would charge but a usb data connection was not possible .. And finally after trying various methods i think it now is a hardware malfunction(becoz of me) and it should be given to a service center..
Rest all is working fine i can flash diff roms , camera ,wifi all working now using pacman rom so i thought service center would charge me more if i gave my mobile as it is.. they could easily charge more for seeing other rom installed So i wanted stock rom flashable by CWM..
So anyone's help is appreciated.. thanks...

mni ANKIT said:
I used odin to flash 2.3.6 firmware in download mode and it installed successfully, i wanted my mobile to connect to external storage device(i.e. pen drive) so i made a cable myself and also attache charger power source to that cable(hoping it would work.e. mount & read pendrive) ..After that my mobile wouldn't cnnect to my comp or laptop via usb data cable....it would charge but a usb data connection was not possible .. And finally after trying various methods i think it now is a hardware malfunction(becoz of me) and it should be given to a service center..
Rest all is working fine i can flash diff roms , camera ,wifi all working now using pacman rom so i thought service center would charge me more if i gave my mobile as it is.. they could easily charge more for seeing other rom installed So i wanted stock rom flashable by CWM..
So anyone's help is appreciated.. thanks...
Click to expand...
Click to collapse
what I understand from your posts is that your phone is perfectly fine but there is a problem with your pc and data cable.
Check with some other data cable,and re-install the samsung drivers for "device not recognized" error.
Use other usb port to check whether its a problem in your pc.

Harryhades said:
what I understand from your posts is that your phone is perfectly fine but there is a problem with your pc and data cable.
Check with some other data cable,and re-install the samsung drivers for "device not recognized" error.
Use other usb port to check whether its a problem in your pc.
Click to expand...
Click to collapse
with samsung data cable i hv nokia and micromax data cable as well.. tested wiyh my friend's laptop.. didn't detect but charging was on...then removed samsung drivers,cleaned registry on windows 7,reboot then installed samsung usb driver 1.4.8..Then tries to connect , same problem(charging but no detection)... Opened settings-->Storage--->clicked menu---->USB computer connection click-->(three options MTP,PTP,Mass Storage) as soon as i click mass storage it force closes displaying message "unfortunately,settings has stopped."
What to do now??..

mni ANKIT said:
with samsung data cable i hv nokia and micromax data cable as well.. tested wiyh my friend's laptop.. didn't detect but charging was on...then removed samsung drivers,cleaned registry on windows 7,reboot then installed samsung usb driver 1.4.8..Then tries to connect , same problem(charging but no detection)... Opened settings-->Storage--->clicked menu---->USB computer connection click-->(three options MTP,PTP,Mass Storage) as soon as i click mass storage it force closes displaying message "unfortunately,settings has stopped."
What to do now??..
Click to expand...
Click to collapse
i never saw any such option on any rom yet!
whenever you connect with usb to a PC you get USB connected notification..click on it and enable mass storage.
never saw MTP & PTP in usb connections.
Which rom are you using?
If its 4.+ then try this

Harryhades said:
i never saw any such option on any rom yet!
whenever you connect with usb to a PC you get USB connected notification..click on it and enable mass storage.
never saw MTP & PTP in usb connections.
Which rom are you using?
If its 4.+ then try this
Click to expand...
Click to collapse
In Device Manager in Universal Serial Bus Controllers i uninstalled everything from ASMedia XHCi controllers to USB Root hub... all of them, then clicked scan for hardware changes then i connected my device to computer, then clicked the app USB mass storage for ics and JB ....on computer the elements(USb Root hub, etc.) reinstalled and there it detected my device as unknown device,,,,then for 5-10 sec a message flashed
something like this ,,...". I.I.I.I.I.I.I.I.I Ata mass storage " then it stopped showing not installed...
Using Pacman rom ..does have mtp,ptp,mass storage options..( when i tick any one of the three options it force closes)...
I googled over net on connectivity issue and will need sum time to format c drive and then try again...:fingers-crossed:

I wonder once in odin multi downloader i ticked the debug option only then i clicked delete driver option which may have caused the problem.......

Finally problem solved...replacing charging IC ( as the repairman said) solved comp connection problem then flashed stock rom....

[SOLVED][Q] help my phone wont connect to pc

i have a htc Sensation 4G running Viper ROM 3.0 aka Jelly bean and it wont connect to my PC my PC says that it doesn't recognize the device.....my phone just doesn't even show the connect notification and when it does it goes strait to tethering via usb and not transferring
can someone please help it would be very appreciated and if you want more info just ask

Young_Azul said:
i have a htc Sensation 4G running Viper ROM 3.0 aka Jelly bean and it wont connect to my PC my PC says that it doesn't recognize the device.....my phone just doesn't even show the connect notification and when it does it goes strait to tethering via usb and not transferring
can someone please help it would be very appreciated and if you want more info just ask
Click to expand...
Click to collapse
Hi,
Several things you can try:
Re-install the drivers/HTC Synch
Check my signature for windows 7 & 8 drivers.
Try a different wire.
Try different usb slots ( front and back,and not usb hub)

Young_Azul said:
i have a htc Sensation 4G running Viper ROM 3.0 aka Jelly bean and it wont connect to my PC my PC says that it doesn't recognize the device.....my phone just doesn't even show the connect notification and when it does it goes strait to tethering via usb and not transferring
can someone please help it would be very appreciated and if you want more info just ask
Click to expand...
Click to collapse
I've played around with the ROM, and this is a bit of a bug. Tethering is the main problem, as the device won't use MTP while tethering is enabled. Whenever it does manage to connect, it will only attempt to tether a connection.
Disable that first by connecting the phone to a PC, when connected click the notification and disable tethering.
You can then use the SD Manager application to connect as mass storage, or you can attempt to use the ROMs in-built MTP transfer.
Also try out Malybru suggestions and see if you can get a more stable connection.

DennisBold said:
I've played around with the ROM, and this is a bit of a bug. Tethering is the main problem, as the device won't use MTP while tethering is enabled. Whenever it does manage to connect, it will only attempt to tether a connection.
Disable that first by connecting the phone to a PC, when connected click the notification and disable tethering.
You can then use the SD Manager application to connect as mass storage, or you can attempt to use the ROMs in-built MTP transfer.
Also try out Malybru suggestions and see if you can get a more stable connection.
Click to expand...
Click to collapse
thanks i will see what works right now im using wifi file transfer as a quick fix but i need the cable to work so i can watch my movies on my tv

[Q] LG GPad V500 - USB Thethering on CM11

Hi guys, this is my first post on this forum, so I'm sorry if I'll do something wrong.
I bought a LG GPad V500 (standard version, not google experience edition) and i noticed that tha stock ROM was not so nice... I successfully installed clockworkmod and CyanogenMod 11. The ROM works fine, it's fast and i didn't find any bug. Just i can't understand how to setup USB thethering (aka reverse thethering).
When i start the server on my Windows 8 PC an app is installed on my tab (USB tunneling app). I accepted the super-user request and then I also installed the fake-wifi hack (included in reverse thethering package).
The problem is that, when I press Connect on my PC, the LOG shows no errors but I can't access Internet from the tab. USB Tnneling app shows "UDP connections: 0" and "TCP connections: 0" and the software on my PC says there isn't any download and upload speed. I reinstalled the apps many times and I replaced adb.exe (I founded this solution on Reverse Thethering official post on XDA, but it didn't work for me).
I googled the problem and I read many times that the kernel should be not able to run a USB thethering. I don't know if it could be true, i used the USB Thethering on CM 11 on my old TF300 (died 3 days ago :crying.
Do you know how to fix this problem? It's quite important for me because I can't use any wifi network at home and at work. Sorry for terrible English and thanks
P.S: is it possible, if needed, to change CM11 Kernel (flashing it using CWM)?

help needed.. very urgent

i need help guys.. aftr upgrading it seems that my laptop (running win8.1) cant transfer media files to my n5.. its showing charging after m connecting but not showing n5 as a drive..

Go to settings - storage - click on top right drop down - USB USB computer connection - make sure MTP is checked
Sent from my Nexus 5 using Tapatalk

ya it is checked

I had a similar issue after rooting. A fresh wipe and rom install fixed the issue. Maybe start there?
I'm sorry. I just realized you might not be rooted. You may also try the factory images...

saikat_ace said:
i need help guys.. aftr upgrading it seems that my laptop (running win8.1) cant transfer media files to my n5.. its showing charging after m connecting but not showing n5 as a drive..
Click to expand...
Click to collapse
My laptop has Win8.1U1 and it works fine. It's probably your drivers not registering correctly, download the USB driver off Google's site, remove your current one in Device Manager and install the new one.
Sent from my Nexus 5

Things I can think of
Reinstall Driver
Try another USB cable - sometimes the data pins might be damaged.
Try disabling the Anti Virus
Try another PC
Hope that helps.