Guys hi, I have an LG Optimus 3D ClockworkMod Root and Recovery 5.0. 2.0 and the stock rom v10k ... What should I do if I get these days to upgrade to Ginger? I do OTA? PC sync? I will update the phone and I have to put up the root and cwd? thanks
Wait for someone to put a flashable file with the stock ROM and flash it trough CWM
thanks....someone tells to use pc sync and it will udate my o3d without any problems...
But sometimes if u have CWM and flash the phone with OTA or LG Mobile support tool the phone can brick.
Better to flash rom with method in my signature or emergency recovery in LG Mobile support tool.
I used your kdz file in order to unbrand my Lg......so i think i'll use it in order to clean my stock rom.....or maybe there will be an appropriate new kdz file witn ginger.....
Related
Hi , few months ago i rooted my phone ( did not install any custom rom) only the clockwork recovery mod (somethin like that) i think , so now i wanna go back to stock so i can install ICS, i download my RUU and a pg58IMG.zip file(what is that for) , so the problem is that my phone is connected in charging mod to my pc , and debugging is on , but adb devices cant read it , what should i do ?
Please any additional info would be appreciated , thank you alot
as far as i know, if you want to install stock htc ics, you just download the original RUU, run setup and plug in your phone, you don't need clockwork recovery or anything else like that, just follow the steps from the HTC RUU setup...
If you have received the FOTA updated just changed the recovery to stock HTC Recovery. And flash or run the OTA update. I use this guide to get back to stock HTC Recovery it may also help you [GUIDE] Get Stock Recovery/Install OTA Updates without losing data.
I make a stupid think- flash cm10 (uses new bb) on my lg p500 with old bb. Now i want to flash everything back but...
1. When i restore rom supports old baseband phone after boot freezes and reboot again and again.( I lost my original firmware cwm backup) Any other roms too.
2. Trying flash whole everything(BB,stock firmware) dont work - kdz update dont see my device.
3.Method with flash new BB dont work exactly. It made Imei backup in nv2 file but everything stuck in emergency mode.
Somebody know other solutions?
Tapnięte z LG P500
boot into recovery, mount usb and kdz will recognize your phone, use http://forum.xda-developers.com/showthread.php?t=1824618
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Depends.
If you want to completely revert to factory settings (that means removing CWM recovery too) then use ODIN method.
If you wish to flash other roms in future then I suggest you to flash pure stock roms by Raj Joshi from android developement section.
Simply flash those like normal roms through recovery.
Tip: Flash CM7,miniCm7 and their derivatives for better performance. Stock roms are always laggy. (atleast for me)
Procedure and Happy Flashing
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007,
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion.in/software/download-odin-rooting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.
So, i'm going to be rooting my G2 here in the next few days. I was wondering if my steps for rooting and then installing this would work. any insight anyone has will be extremely appreciated. Now, i'm on 4.4.2 now so i know i'll use this guide (http://forum.xda-developers.com/show....php?t=2673736) to do so. However, i'm wondering if i dont need to follow it EXACTLY to get what i want. Shouldn't i be able to follow it to downgrade and install a custom recovery, but instead of flashing the rom in step 6, just flash SuperSU, flash custom ROM, flash GAPPs, and then flash the D801 KK modem?
I'm asking because i dont want to have a stock LG rom, but a custom one.
troysyx said:
So, i'm going to be rooting my G2 here in the next few days. I was wondering if my steps for rooting and then installing this would work. any insight anyone has will be extremely appreciated. Now, i'm on 4.4.2 now so i know i'll use this guide (http://forum.xda-developers.com/show....php?t=2673736) to do so. However, i'm wondering if i dont need to follow it EXACTLY to get what i want. Shouldn't i be able to follow it to downgrade and install a custom recovery, but instead of flashing the rom in step 6, just flash SuperSU, flash custom ROM, flash GAPPs, and then flash the D801 KK modem?
I'm asking because i dont want to have a stock LG rom, but a custom one.
Click to expand...
Click to collapse
Ok if you are on 4.4.2 you will need to downgrade.The easiest method for me was tot method.You need to instal drivers on windows 7 64bit, then lg flash tool 1.8 , download 4.2.2 tot and ioroot.Go in download mode on your phone, change usb communication port in device manager in windows to 41.load the tot file and the dll file (needed to communicate with your phone) in the lg flash tool,restart the phone leave the cable plugged in and the downgrade will get hapen.Then autoroot via adb and ioroot. Sorry for my grammar O and then you ned to install autorec or flashify to be able to flash recovery,restart in recovery instal whatever you want Cm11 or stock(need a special kernel if you have purchased the phone lately)diferent hardware.ask me to clarify if you want.bye
Hey, guys i think i just bricked my phone I was trying to install OTA update, but i forgot that my /system was modified and i am with custom recovery. Now when i turn on the phone, no matter with SD card or not, it loads up the custom carlwin recovery and gives me error installing package. Cannot boot to android at all. What should i do now ? I need help very fast, this phone is my daily driver i cant go without it now.
Edit: Also to mention i dont have root access, removed root because the update.
I think i cant do nothing right now really.
Flash stock firmware on the device.
Hackerpunk1 said:
Flash stock firmware on the device.
Click to expand...
Click to collapse
I repaired it a while ago, used SP Flash Tool to flash stock firmware. I am with a new phone now, not using the huawei anymore.