I make a stupid think- flash cm10 (uses new bb) on my lg p500 with old bb. Now i want to flash everything back but...
1. When i restore rom supports old baseband phone after boot freezes and reboot again and again.( I lost my original firmware cwm backup) Any other roms too.
2. Trying flash whole everything(BB,stock firmware) dont work - kdz update dont see my device.
3.Method with flash new BB dont work exactly. It made Imei backup in nv2 file but everything stuck in emergency mode.
Somebody know other solutions?
Tapnięte z LG P500
boot into recovery, mount usb and kdz will recognize your phone, use http://forum.xda-developers.com/showthread.php?t=1824618
Related
Hi, I recently tried flashing my defy (mb525 from Israel with an Israeli ROM) with Chinese Froyo, flashed the phone and it wouldn't boot, was like that for a while and I tried flashing many versions in hope it would unbrick him, no joy. Long story short now i have a Defy with 2.3.4 (shadow-128, not the fixed version, the undowngradeable version).
I thought maybe finally trying to restore a nandroid backup, but I don't have CWM.
Questions are:
Is there a way to install CWM through a zip file?
Can I restore a Nandroid backup without CWM (or any sort of custom recovery)?
Any other solution that can save my phone?
Thanks Y'all,
hope I will finally unbrick that bastard.
Read this for downgrade and root.
http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143
Didn't work, just like all ROMs before, it shows the moto logo, then shows, motoblur, or android or any other animation (depends on the version), and its stuck on that an not starting the phone.
if you now in 2.3.4, cannot downgrade.
read this:
http://forum.xda-developers.com/showthread.php?t=1152377
it works!
Your device isn't bricked. You only have a bootloop.
Like already said, Downgrade is not possible so you should flash a ROM with your Bootloader-version and make a wipe.
Guys hi, I have an LG Optimus 3D ClockworkMod Root and Recovery 5.0. 2.0 and the stock rom v10k ... What should I do if I get these days to upgrade to Ginger? I do OTA? PC sync? I will update the phone and I have to put up the root and cwd? thanks
Wait for someone to put a flashable file with the stock ROM and flash it trough CWM
thanks....someone tells to use pc sync and it will udate my o3d without any problems...
But sometimes if u have CWM and flash the phone with OTA or LG Mobile support tool the phone can brick.
Better to flash rom with method in my signature or emergency recovery in LG Mobile support tool.
I used your kdz file in order to unbrand my Lg......so i think i'll use it in order to clean my stock rom.....or maybe there will be an appropriate new kdz file witn ginger.....
Hi guys
I've rooted a Ouku Horizon (P801W) and make a backup with Titaniun Backup Pro to my SDcard of all System and User apps and data.
I wanted to flash a new rom so I get Rom Manager and to backup my current rom (just in case) I installed the flash ClockWorkMod recovery ( I supose that was the first mistake, as I did not get from the list of phones my P801W I install another one)
Then I did "Backup Current Rom" and when the phone reboots it took forever freeze at booting in Ouku logo over black screen.
I soud backup the rom manualy but I didn't
Now I won a brick? or is recoverble?
hard reset (home buton + sound down + Power on) don't get me in to recover mode just no mather what I do it freeze at boot Orku logo.
Please help!!!!
can Odin software be a solution to flash the original or other rom again to the phone?
thanks guys
Yes odin should fix the problem just download original firmware and flash it with odin. Sorry usually i find the tut but now dont have much time.
thanks suki
I'll give it a try
does any one know how to put a Orku Horizon in download mode?
I tried all combinations of butons that I think of and no luck...
any insight?
I supose that Odin is a solution to my nerly bricket phone.
I should flash a recovery or a new compatible rom(?)
unfortunately from Ouku manufactory I can't get any kind of realy technical answer.
so I dont know how to proced with Odin...
my specs are:
Model number - P801W
Android 2.2.2
baseband version iris_p800 v1.20
Kernel 2.3.35.7perf.
[email protected]#3
Build nº FRG83G
software version Iris-p801W_v.21
Hardware version Iris_MP
any insight???????
pls
If you want an official rom just flash the rom using odin.
And for custom roms flash first CWM recovery, and then the rom you like.
I don't mind to put a custom rom in it, unfortunately I don't have any idea wich Rom to use.
If I put Cyanogenmod or Miui and if it is incompatible with Ouku Horizon android phone dont I brick it definitively?
does those custom roms support dual sim?
another thing is that I suppose I bricked my phone when I install a non specific CWM to Orku Horizon (P801W) through Rom Manager
because when it ask for the phone model mine wasn't listed so I chose a model that I tough was a generic...
(what a dumb ass!!!)
thanks a lot for your help Suky08
ROM for OUKU P801W
You can download the firmware for OUKU P801W on: Forum.China-iPhone.Ru
envenenador, have you tried the last tip?
how did it go?
and how did you manage to boot your phone. superclickone keeps on not working.
same with universal androot...
SOLVED I just root the v21e and flash the cwm and flash a custom rom with v21a and network working and imei fixed
Hello All,
I was on internet via wifi with my optimus 3d GB Stock rom (root and cwm) andi saw i firmware update (12mb) and i downloaded and install it.. install crash on reboot and then i stuck on cwm on every reboot (that i think is the bootloop right?) i fix the bootloop, i fix the bootloop with pandaball topic (Thanks) And now i have v21e stock rom with no network and no imei!!!! What i am gonna do?:crying: please little help here!!! (Sorry for bad english:good
Hey, guys i think i just bricked my phone I was trying to install OTA update, but i forgot that my /system was modified and i am with custom recovery. Now when i turn on the phone, no matter with SD card or not, it loads up the custom carlwin recovery and gives me error installing package. Cannot boot to android at all. What should i do now ? I need help very fast, this phone is my daily driver i cant go without it now.
Edit: Also to mention i dont have root access, removed root because the update.
I think i cant do nothing right now really.
Flash stock firmware on the device.
Hackerpunk1 said:
Flash stock firmware on the device.
Click to expand...
Click to collapse
I repaired it a while ago, used SP Flash Tool to flash stock firmware. I am with a new phone now, not using the huawei anymore.