Related
I like to share my DHD ROM for Desire, it is base on DHD HK RUU.
This rom use my script DATA2EXT, it is superfast.
DownloadLink:
multiupload:ownheredesireHD_v1.6_101205.zip
Additional:
HtcLaputa(Location,Navi):http://u.115.com/file/f5dd099cc, use this resolve carpanel and repeat download map issues. mirror:http://rapidshare.com/files/435169937/HtcLaputa.apk, thanks to uridium_uk
original framework-res.apk(for battery icon):http://www.multiupload.com/VRAF74HTX7
Notice:
1.This rom will be format your 2nd partition automaticlly, so you need backup your 2nd partition first.
2.I don't like deodexed system, because it will change apk's signatur, that I can not upgrade my system app for new update. And deodexed system will take more time for first booting time:every app need dexopt.So I use stock odex system.
3.Don't setup Google account until your TitaniumBackup restore job finish.
4.Some say this ROM will destroy the SD card, I have not encountered, and if SD card is not recognized in Windows, you can use Windows Computer Management -> Disk Management, assigned a drive letter for SD 1st partition, so you can see fat32 partition
5.put bootanimation.zip and shutdown.zip on /data/local will be replace BootAnimation and RebootAnimation.
Optimization Suggestion:
1.use fast SD card, class 4 or higher.
2.format SD 1st partition(fat32) with 32K cluster.
3.use setcpu overlock to 1113Mhz
4.use static wallpaper
5.use ADW Launcher
Requirement:
1.SD card with 2nd partition, 2nd partition is not less than 512M, recommend 1G for large app space and super fast. The second partition can be in any format.
2.Bravo Stock MTD(system:250M,data:150)
Installation:
use RA or ClockworkMod recovery, or ROMManager flash ownheredeisreHD_v1.6_101205.zip.
the first boot take long time(about 5-15 mins).
Feature:
1.ownhere's data2ext, get large app installation space,special for /data/data, which leave in phone memory with a2sd/a2sd+. You can install many many app with data2ext with out memory full warning.
2.ext4 loop device in ext4 partition, speed up IO.
3.kernel base htc 2.6.32.15, add BFS,GPU+,SDFIX,UnderVolt,OverClock,LZMA, thanks to richardtrip and all kernel devs. I disabled HAVS, cause of it lead phone not stable.
4.google maps 4.7.0 ownhere MOD, base on brut17 (thanks to brut.all), internationl navi.
5.ROM base on DesireHD HK RUU 1.32.832.1
6.kernel module:cifs,nfs,utf8,nilfs2,reiserfs,tun...
7.You can replace framework-res.apk with mod version(signed by testkey), because I've resigned some core app/lib for personalize battery-icon.
Known Bug:
1.720p recording
Update Note:
v1.6
Code:
1.enable EXT4 journal, more stable after reboot or lost power.
2.remove some paid app(sorry to author)
Thanks to:
snq-
robocik
sibere
enjoy it.
ownhere said:
I like to share my DHD ROM for Desire, it is base on DHD HK RUU.
This rom use my script DATA2EXT, it is superfast.
Requirement:
1.SD card with 2nd partition, not less than 512M, strongly recommend 2G for large app space and super fast.
2.Bravo Stock MTD(system:250M,data:150)
enjoy it.
Click to expand...
Click to collapse
2nd partition, ext2, 3, or 4?
1st partition fat32?
coutts99 said:
2nd partition, ext2, 3, or 4?
1st partition fat32?
Click to expand...
Click to collapse
Yes, it's right.
coutts99 said:
2nd partition, ext2, 3, or 4?
1st partition fat32?
Click to expand...
Click to collapse
+1.
I want to know too.
based from a dhd rom, what have you added or taken from it? or is this just purely just a speed increase rom?
just curious.
but aside from that, is this simply a straight flash-able rom? (provided the card is partitioned) or are there other steps involved?
thanks.
ownhere said:
I like to share my DHD ROM for Desire, it is base on DHD HK RUU.
This rom use my script DATA2EXT, it is superfast.
Requirement:
1.SD card with 2nd partition, 2nd partition is not less than 512M, strongly recommend 2G for large app space and super fast. The second partition can be in any format.
2.Bravo Stock MTD(system:250M,data:150)
Thanks to:
snq-
robocik
enjoy it.
Click to expand...
Click to collapse
I found that there is stock and location patch file in your other post
hXXX://bbs.gfan.com/viewthread.php?tid=348528&extra=page%3D1%26amp;filter%3Dtype%26amp;typeid%3D171
Is it included in this version or we need to download it separately.
BTW, this is very good ROM. thanks!!
"The second partition can be in any format."
Pretty sure that means ext2-4.
02xda1 said:
based from a dhd rom, what have you added or taken from it? or is this just purely just a speed increase rom?
just curious.
but aside from that, is this simply a straight flash-able rom? (provided the card is partitioned) or are there other steps involved?
thanks.
Click to expand...
Click to collapse
Partition your SD card and flash the zip file.
There is no other step involved.
Just simple and easy.
Dose it work well with my kingston class 2 8G card?a light user from gfan.com
Sent from my HTC Desire using XDA App
michaelmai88 said:
Partition your SD card and flash the zip file.
There is no other step involved.
Just simple and easy.
Click to expand...
Click to collapse
thanks for clearing that up, but in regards to the other part of the question, is it a standard dhd rom or are there any extra's worth noting?
02xda1 said:
thanks for clearing that up, but in regards to the other part of the question, is it a standard dhd rom or are there any extra's worth noting?
Click to expand...
Click to collapse
standard dhd rom with totaly diffrent disk layout, very smooth, very fast
How do I create 2 partitions on my sd card
Sent from my HTC Desire using XDA App
is there JAVA in this ROM and rotation?any pictuers
ownhere said:
standard dhd rom with totaly diffrent disk layout, very smooth, very fast
Click to expand...
Click to collapse
Thank you for your effort. Could you upload to dropbox? Estimated download time on megaupload is over 8 hours.
Thanks in advance.
Im sure many were waiting for this release.
Can you confirm sd partition - swap =0, ext = 1 gb , convert ext 2 to 3 and then 3 to 4 ?
sorry for noob question
ps - i have to wait 22 hrs for the whole file to come in....
ownhere said:
standard dhd rom with totaly diffrent disk layout, very smooth, very fast
Click to expand...
Click to collapse
cifs / sdcard fix / chargemod fix / etc / what kernel ?
give us more details
02xda1 said:
thanks for clearing that up, but in regards to the other part of the question, is it a standard dhd rom or are there any extra's worth noting?
Click to expand...
Click to collapse
When you flash this ROM, you will get data2ext automatically.
It means that how big you size your 2nd partition, you get the same size internal memory. It's just the Desire user needs.
can anyone mirror this somewhere else please?
megaupload are really really slow for me at the moment, i'm getting speeds of around 5.1-5.7KB/sec
says i've got over 10 hours to go
we need more info ...
screenshots ... kernel ... apps
then we can try it ..
+1 for Mirror ... whats up with Megaupload ... it should be called Microupload ...8)
I have searched and can't quite find an answer.
I have 2.2 on my Ideos, used Amon Ra recovery to partition my SD card. How do I enable or install or activate apps2sd for myself? Is it a kernel thing or is there a scripts or app i can run to start using my sdcard ext parition as memory?
Sorry if this has been anwered 1000 times before...
Thanks for any information.
you can use app2sd and move2sd enabler with your stock rom or can you can use a custom rom that support app2sd+ script formatting your sd with a ext3 partition
Thanks for the info.
I know that froyo has native apps to sd support, and I probably worded my question wrong. I think I meant to ask how does one get apps2ext to work. Judging by your response it's a ROM thing, cooked into it eh.
Thanks.
we have no app2ext rom at the moment for our ideos
DJDROID-Ideos has apps2ext doesn't it?
App2sd plus
nobreak1970 said:
DJDROID-Ideos has apps2ext doesn't it?
Click to expand...
Click to collapse
Yesss!!! DJDroid Ideos have App2sd plus [work with Ext2 Ext3 Ext4]
the Mod is in ramdisk and script in init.d for Ext4 you must mod Kernel
So it's gotta be cooked into a rom though right? Or is there a script or something that will install it on my phone's current rom?
Thanks.
nobreak1970 said:
So it's gotta be cooked into a rom though right? Or is there a script or something that will install it on my phone's current rom?
Thanks.
Click to expand...
Click to collapse
You MUST mod the boot.img and than you can add a script
Thankyou, that's exactly what I wanted to find out.
Please any one help me how to.use ungaze data2sd with complete details
Mahesh
http://forum.xda-developers.com/showthread.php?t=1042828
http://forum.xda-developers.com/search.php
All the details are in the thread what don't you understand
Sent from my LG-P500 using XDA Premium App
dislplin01 said:
All the details are in the thread what don't you understand
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
How to move file using data 2sd
Mahesh
mvgadagi said:
How to move file using data 2sd
Mahesh
Click to expand...
Click to collapse
well if you want the full use of data2sd by ungaze then the first step is partition your sd card after you do that then i would suggest flashing a your rom fresh and whatever MODs you have after you have flashed all mods and your ROM {please reboot between each MOD} then finally flash ungazes data2sd if you did it right you will have a large performance boost and more space for apps for example i had a 16 gig sd card made 2560 mb partition and now after flashing data2sd i have 1.7 gigs of apps space and a quadrant score of 2300 so if you have questions then PM me
dislplin01 said:
well if you want the full use of data2sd by ungaze then the first step is partition your sd card after you do that then i would suggest flashing a your rom fresh and whatever MODs you have after you have flashed all mods and your ROM {please reboot between each MOD} then finally flash ungazes data2sd if you did it right you will have a large performance boost and more space for apps for example i had a 16 gig sd card made 2560 mb partition and now after flashing data2sd i have 1.7 gigs of apps space and a quadrant score of 2300 so if you have questions then PM me
Click to expand...
Click to collapse
please, tell me the steps
i want flashing void forever :
- partition sdcard ext2+fat32 (is swap have an effect?)
- flash the void forever rom
- flash add on void forever
- reboot(?)
- flashing ungaze data2sd
- reboot
- done
but i have some problem on it
- sometimes bootloop
- i cant instal any apk, the button wont respond
- else, the ext2 partition i created is gone, when i check with titanium backup
i just tried it around 2 days and still have that problem
and sorry for my bad english
lightnoid said:
please, tell me the steps
i want flashing void forever :
- partition sdcard ext2+fat32 (is swap have an effect?) EXT4 recomended
- flash the void forever rom
- Reboot
- flash add on void forever
- reboot(?)
- flashing ungaze data2sd
- reboot
- done
but i have some problem on it
- sometimes bootloop
- i cant instal any apk, the button wont respond
- else, the ext2 partition i created is gone, when i check with titanium backup
i just tried it around 2 days and still have that problem
and sorry for my bad english
Click to expand...
Click to collapse
answers in bold
is it ok with ext4?
in http://forum.xda-developers.com/showthread.php?p=13049131#post13049131 said that Ungaze Data2Sd not support ext4 and ext3
dislplin01 said:
well if you want the full use of data2sd by ungaze then the first step is partition your sd card after you do that then i would suggest flashing a your rom fresh and whatever MODs you have after you have flashed all mods and your ROM {please reboot between each MOD} then finally flash ungazes data2sd if you did it right you will have a large performance boost and more space for apps for example i had a 16 gig sd card made 2560 mb partition and now after flashing data2sd i have 1.7 gigs of apps space and a quadrant score of 2300 so if you have questions then PM me
Click to expand...
Click to collapse
Hi all,
Currently I'm using CM7 and install ungaze data2sd on my phone. I already have ext2 file and my phone shows additional internal memory. I then install apps without any problem and once done, I try to reboot it. However, I found that those apps which installed earlier on were gone. Can anyone help me with this?
Addition, when I check the sd card, I found an d2sd folder and inside it have unknown files named error_0222120031, error_0222120039, error_0222120122 and error_0222120143. Can anyone help me with this?
missing market??
After flashing ungaze... I reboot then somehow my market app is missing but when i used the search function i can still search it and use it... Then after two reboot (not necessarily simultaneous) i got my market back... Using nightly four e 4.2 with ta.gb 1.2 kernel...
alexdino89 said:
Hi all,
Currently I'm using CM7 and install ungaze data2sd on my phone. I already have ext2 file and my phone shows additional internal memory. I then install apps without any problem and once done, I try to reboot it. However, I found that those apps which installed earlier on were gone. Can anyone help me with this?
Addition, when I check the sd card, I found an d2sd folder and inside it have unknown files named error_0222120031, error_0222120039, error_0222120122 and error_0222120143. Can anyone help me with this?
Click to expand...
Click to collapse
you need a freshly installed rom... do a full wipe then flash a custom rom and then flash this ungaze data2sd mod but i recommend you to use app2sd mod by darktremor that is quite stable and very easy to use
Sent from my LG-P500 using xda premium
amao10 said:
After flashing ungaze... I reboot then somehow my market app is missing but when i used the search function i can still search it and use it... Then after two reboot (not necessarily simultaneous) i got my market back... Using nightly four e 4.2 with ta.gb 1.2 kernel...
Click to expand...
Click to collapse
i guess your market get frosted use titanium backup or anyother app to defrost market app
Sent from my LG-P500 using xda premium
amao10 said:
After flashing ungaze... I reboot then somehow my market app is missing but when i used the search function i can still search it and use it... Then after two reboot (not necessarily simultaneous) i got my market back... Using nightly four e 4.2 with ta.gb 1.2 kernel...
Click to expand...
Click to collapse
Lol. I see. well I try to continue use it who knows my apps that had gone will reappear. lol!! Thanks for your comment bro!
abhinav quietly brilliant said:
you need a freshly installed rom... do a full wipe then flash a custom rom and then flash this ungaze data2sd mod but i recommend you to use app2sd mod by darktremor that is quite stable and very easy to use
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
androidusero1p500 said:
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
ungaze script is not stable have alot of bugs.. and i have approx 746mb of apps installed which is stored on sd-ext and my internal memory used is only 63mb using dt script.. no issues with dt script
Sent from my LG-P500 using xda premium
androidusero1p500 said:
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I have 1.3gig apps on sd n ungaze has been the best ever for me for me it's 100%bugfree !
Sent from my LG-P500 using Tapatalk
androidusero1p500 said:
I disagree ..
My suggestions -
1) use ungaze v5 (not v2)
2) wipe dalvick cache before flashing it..
It doesn't matter whether it's Fresh rom or not..
I have used ungaze with having more than 120mb worth apps previously
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
V5?? How to find version 5 of Ungaze?? Do you have the link?? Because currently I'm using the v4b5.
Please help me in this issue !
i installed ungaze script to increase internal memory 190MB to 0.89GB
it worked fine.
After every reboot the internal memory get back to default state.
as stated in trouble shooting i removed my sd in recovery mode and mounted sd ext by reinserting the sd and it works like charm.
but it cant be done in normal system reboot. so anybody please help me in this issue.
Thanks in advance for your helps.
Sent from: Samsung Galaxy y -Custom Rom-merruks 2.5 Kernel
============================================================================================
============================================================================================
Hit THANKS if u like my issue
WANT TO MAKE YOUR GALAXY Y AS A HIGH END DEVICE WITH 1.2GHZ , 1 GB INTERNAL STORAGE , HD GAMING , LAGGLESS
GO THE BELOW LINK
EMPOWER YOUR GALAXY Y
Click here
Hi guys,
I've again have some stupid questions. I'm sorry if it was answered before, I didn't find. I'm using CM9 build #8.
1. I saw so many ways to use sd card partition to increase internal memory space. Which one should I use?
2. How can I partition my sd card(I have 8GB class 10) using phone(looks like my computer doesn't read sd card with the adapter)? Can someone give me full instructions(something like "1. do this 2. do that and etc")? I want to do everything carefully .
3. I see that I must have kernel, which supports ext partition. Which kernel should I use? I think this one should be the best, it has overclocking support too.
4. How can I install custom kernel?
5. Oh, and a little of topic question, do you think this(the part about ram) will really work?
Thanks. Please answer them .
Easyest way to repartition your sd is with recovery, there is pretty no way, to get it wrong, just remember ext partition, should be no more than 2GB and swap is 0.
About how to move app-s, there are a lot of scripts, my personal choice is S2E, its in the play store, becouse you can leave app data, on the internal memory which helps for smoothnes.
This kernel is good, but it wont work with stock rom, so you should choose some else, and this else is jaggy's or next gen.
Kernel is easy to install, just mount /system and /data, from recovery "mounts and storage" menu, then just flash the kernel, nothing needs to be wiped, or something else.
About the last question I havn't tryed it, but mostly I don't think there is need of something like that, Android know's what to do with the ram, it's not windows.
Oh and there is normal your PC to not find your ext partition if you are running windows system.
shortyoko said:
This kernel is good, but it wont work with stock rom, so you should choose some else, and this else is jaggy's or next gen.
Click to expand...
Click to collapse
I'm using cm9 build #8, will it work? By the way, can you give me a link to the file to download? Because there is only 7z files, which recovery doesn't read. And can I use phonec as usb storage after partitioning and using these scripts?
Thanks a lot .
Sent from my HTC Explorer A310e using xda app-developers app
zgintasz said:
I'm using cm9 build #8, will it work? By the way, can you give me a link to the file to download? Because there is only 7z files, which recovery doesn't read.
Thanks a lot .
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
CM9 already has a custom kernel which supports scripts.. So you dont need to flash a custom kernel.. And as far as the app2sd scripts go, itz a matter of personal choice.. Some people use S2E, because of its simplicity and ease of use, while others use complex ones like d2ext, int2ext, ungaze, etc.. And then there are some who like to use more complex scripts like Mount2SD, which gives options like S2E, but can be used from the terminal.. For eg, you can choose to mount dalvik, cache, app, data to the ext partition..
So, in short, to each his own..
Hope this helped.. :good:
bhargz16 said:
CM9 already has a custom kernel which supports scripts.. So you dont need to flash a custom kernel.. And as far as the app2sd scripts go, itz a matter of personal choice.. Some people use S2E, because of its simplicity and ease of use, while others use complex ones like d2ext, int2ext, ungaze, etc.. And then there are some who like to use more complex scripts like Mount2SD, which gives options like S2E, but can be used from the terminal.. For eg, you can choose to mount dalvik, cache, app, data to the ext partition..
So, in short, to each his own..
Hope this helped.. :good:
Click to expand...
Click to collapse
Thanks, there is one not answered question, can I use phone as usb storage after partitioning sd card and using these scripts?
zgintasz said:
Thanks, there is one not answered question, can I use phone as usb storage after partitioning sd card and using these scripts?
Click to expand...
Click to collapse
Ya ofcourse you can.. You can use it as usual..
Hi, I could use some pointers on how to get data2sd on to my tablet.
I recently flashed to my first ROM, Cromi-X 5.0.3, and it seems to work well. Now I would like to apply data2sd in addition - maybe it was stupid, I guess it would have been smoother to apply that in the same move.
Anyways, I have set up a high speed micro-SD card now, formatted according to the instructions.
Now - I am a bit confused about flashing with a kernel - can I pick a kernel from the downloaded Cromi-X 5.0.3 zip-file, and flash that without any major wiping? If not, which kernel should I pick then... ?
Thanks!
frax said:
Hi, I could use some pointers on how to get data2sd on to my tablet.
I recently flashed to my first ROM, Cromi-X 5.0.3, and it seems to work well. Now I would like to apply data2sd in addition - maybe it was stupid, I guess it would have been smoother to apply that in the same move.
Anyways, I have set up a high speed micro-SD card now, formatted according to the instructions.
Now - I am a bit confused about flashing with a kernel - can I pick a kernel from the downloaded Cromi-X 5.0.3 zip-file, and flash that without any major wiping? If not, which kernel should I pick then... ?
Thanks!
Click to expand...
Click to collapse
You need to partition your sd card into fat32 and ext4 as per the instructions here using gparted. Do not use minitool please:
http://forum.xda-developers.com/showthread.php?t=1962507
Then reflash the rom picking a data2sd option.
sbdags said:
You need to partition your sd card into fat32 and ext4 as per the instructions here using gparted. Do not use minitool please:
http://forum.xda-developers.com/showthread.php?t=1962507
Then reflash the rom picking a data2sd option.
Click to expand...
Click to collapse
Yup, I have done that - but I can't see (in the ES file explorer) the partitions that should be in place, and in AndroBench, I don't get the speeds I should be seeing...