[Q] Official Mango Update Wanted ! help! - Windows Phone 7 Q&A, Help & Troubleshooting

Hey guys, hope all is well..
I've made a complete 'pickle' out of my HTC Trophy (Vodafone NZ - Unbranded)..
I was happily using Ansar's europe Mango rom found from these forums for a couple of weeks only to notice that a few key features were not working, Local Scout would not identify anything in my country and Bing song recognition was not visible =/..
I had been given word that the official NZ rom had finally been released through Zune so I (Foolishly) thought it was as simple as flashing with the Vodafone NZ NoDo rom (Also found here by Ansar) and attempting to update the firmware through Zune as usual.. Boy was I wrong..
After the flash had been done, I noticed through Zune that the actual image of the device shown was not my Trophy.. It said 'HTC Trophy'.. But the image wasn't.. I chose to ignore that and attempt to update the firmware, it happily updated right up to 7403, but the following update from this (I assumed Mango) bounced back with the error 80180048..
I've looked through every possible source of knowledge on the net which led nowhere (Even attempted the unwalshing tool but it advised me my device wasn't walshed).. So I'm pretty much stumped.
If anyone at all can help me, I will have your babies..
=P
MVP
EDIT - If it means anything, The moment it goes to install the new firmware to the device that USB message pops up on my computer (Win 7) saying that the performance would be a lot better if I plugged it into a USB 2.0 port (Obviously it is..)
Also, on all the previous updates I get a status bar on the phone of how far through the update it is, when it is updating this last firmware I don't get this status bar, it just sits on the same image of the phone and pc with a crossed out arrow in the middle for about 10 minutes then reboots with the above error message

Related

PLEASE PLEASE HELP ME

Hi guys I really need your help PLEASE,
I have only had my O2 XDA II Mini for 2 days, and I decided to upgrade the ROM early so I don't have to backup all my data before I have any (if you know what I mean).
Anyway, I went to www.seeo2.com to get the official upgrade. Clicked onto Oceania (i live in Australia), followed the instructions exactly for upgrade and downloaded the ROM upgrade. For everyones information the filename is ma_o2asia_11100_922_11100_ship.exe. Anyway, I had my device connected, had is synched up and started the upgrade process - at 11% an error appeared saying there was a RADIO ERROR and that I must restart the process.
I restarted the process, and an error came up saying ERROR 120: COUNTRY ID ERROR. And says that the ROM is not designed to be used on my device. I DOWNLOADED the Rom from the O2 website in the Australian section.
Now, my screen is stuck with SERIAL up the top and V.1.00 down the bottom when not connected to the computer, and USB up the top and V.1.00 down the bottom when plugged into the computer. The ROM upgrade continues to give me the same COUNTRY ID error.
PLEASE PLEASE HELP ME
Kindest Regards
Nick Chapple
Don't be lazy :!: .
All upgrade procedures are few times described in this forum, just read it.
Good luck

[Q] Upgrading G2Touch/Hero to 2.1

I have an unlocked T-Mobile G2 Touch (service provider O2), which I am trying to upgrade to 2.1. I am currently running 1.5 and have just updated to the 2.73.110.26 ROM which I downloaded and installed from HTC.
After installing this ROM upgrade i get a message asking me to do a software update, (which I understand from reading forums should complete the upgrade to 2.1), but shortly after confirming the update the handset turns off then turns on with what appears to be a warning display, (a triangle next to a presumably dead handset graphic).
I have left it like this for 20mins+ and nothing happens so i have tried the process again, (re-install 2.73.110.26 ROM, get prompt to update), still the same problem.
Does anyone have a suggestion? I can't help but think I am having this problem because I have an unlocked phone.
I should also point out that just before doing all of this I rooted the handset, (followed instructions from Unlockr.com). I had planned to use a custom ROM but if i'm honest it was daunting and so I thought i'd attempt the official update first.

[ROM]RUU_Spark_HTC_Europe_1.09.401.08_Spark_5.51.09_REL EASE

Here Europe ROM for Spark aka Trophy
http://www.multiupload.com/MPLON9CAQZ
DO NOT TRY TO FLASH THIS ROM FOR ANY OTHER DEVICE EXCEPT SPARK!
Enjoy!
Is there any changelog or sth.?
Football said:
Here Europe ROM for Spark aka Trophy
http://www.multiupload.com/MPLON9CAQZ
DO NOT TRY TO FLASH THIS ROM FOR ANY OTHER DEVICE EXCEPT SPARK!
Enjoy!
Click to expand...
Click to collapse
Really great. Thanks!
Has anyone tried it yet?
ruu tool doesn't find the phone
-edit: nevermind, I must be blind -
Is Spark the codename for Trophy? Haven't heard of HTC Spark...
It is very simple, disconnect your phone from the USB cable. Turn him off. Press VOL down holding him and press start holding it. Then you will see this color mode with SPL version, connect USB to the phone, new driver for sync will be installed, after that start the firmware update..
But i still get a error message: Wrong Vendor ID, so we need to wait for some HSPL or SPL.
Enjoy
i did what you said but I still cant find my phone. SYNC software wasnt found btw
lagejan said:
i did what you said but I still cant find my phone. SYNC software wasnt found btw
Click to expand...
Click to collapse
Have you installed the zune software? You need it for the drivers.
Yes I have. Do I need to start up Zune?
Edit: To be more specific: I get the "connection error". They tell me to check my usb-cable. I don't understand what's wrong. When I return to normal mode and connect my phone to Zune, it is recognised....
Hello,
thank you for this page. This website has given me the only info I can find with this phone.
I want to update my firmware as I can only have one apn active, some options are not there that I am sure should be.
To get the driver to work, you need to install ActiveSync. Zune did not install the driver needed for the firmware update.
I followed the process through. Got to the stage of it being updated, then recieved an error "This NBF file cannot be used for your PDA phone. Please get a newer NBF file"
I have a htc spark and im sure its an old version, I have been using it for dev and testing..
any ideas or possibly a different firmware image to try?
Much appreciate the info on this site.
It work for all Trophy ? I have a Vodafone Spanish version.
Thanks.
No not all. It doesn't work on mine (got the wrong vendor ID). Waiting for another.
You cannot un-brand your Phone with this rom. If you have a Vodafone Trophy it will not update.
delltech1 said:
It is very simple, disconnect your phone from the USB cable. Turn him off. Press VOL down holding him and press start holding it. Then you will see this color mode with SPL version, connect USB to the phone, new driver for sync will be installed, after that start the firmware update..
But i still get a error message: Wrong Vendor ID, so we need to wait for some HSPL or SPL.
Enjoy
Click to expand...
Click to collapse
i got wrong vendor ID as well, i am the vodafone one, but flashing the vodafone rom with no problem...
How did you do it? I and everyone I spoke gets the wrong vendor id with the Vodafone branded Trophy rom.
Flashing with "wrond (vodafone) id??"
junchangchen said:
i got wrong vendor ID as well, i am the vodafone one, but flashing the vodafone rom with no problem...
Click to expand...
Click to collapse
How did U do it because when "Wrong vendor id" appears flashing stops and phone reboot automatically
Of U only want to disturbs this, otherwise, very friendly helping forum???
I am just not sure about updating my HTC Trophy 7 Vodafone with this ROM. Is there any knowledge on how Microsoft will apply updates to Windows Phone 7?
So far, I have read on several places on the web that, in case of a provider modified phone as mine, the provider has to confirm the Microsoft updates for their custom (provider) ROM. I wonder if it is the ROM contacting the Microsoft searching for updates (with or without IMEI information, Vendor ID etc.) or if Microsoft just pushes the updates toward the active Windows Live accounts.
Couldn't there be a chance that if we, somehow, apply an "unofficial" update for a device (like the EU ROM for a Vodafone device) that we will not be able to receive further updates anymore?
Sorry for posting this here, it is just that I think this could be possible and I couldn't find any documentation on this on the web.
yeah i've read that to...
Was quite dissapointed because i also have an vodafone branded rom...
But anyways, it's a matter of time before we can flash different kind of roms to the phone.
And when the update comes, maybe some guys over here can benefit from it to flash an rom to the signed phone.
mtem1985 said:
yeah i've read that to...
Was quite dissapointed because i also have an vodafone branded rom...
But anyways, it's a matter of time before we can flash different kind of roms to the phone.
And when the update comes, maybe some guys over here can benefit from it to flash an rom to the signed phone.
Click to expand...
Click to collapse
+1
With my Nexus One, was only a matter of time at first. After that period of time of nobody knowing anything, well, you know the rest, everybody have their devices rooted and with cooked and stock unbranded roms, and all work very fine.
I suppose that with WP7 is only a matter of time too, so no worry about it. Enjoy your beautiful new phone, and when an update comes officially from MS, then we will see.
P.S. I'm looking forward to the arrival of my Trophy, probably on monday or tuesday. I believe that I could have it today but...

Error code 80180048 when updating to mango

I have an un-branded Samsung Omnia 7 (Deutsche Telekom I believe). I did the force update for mango and was able to update to 7403 just fine. However, at the last step 2 of 2 of updating to 7720 it gave me the error code 80180048. I do not have a walshed phone because I tried using the walshed fix and the program said my phone wasn't walshed. Any one having this issue or have fix for this? Thanks.
All Languages
I was having a problem with failled Mango update and I discovered I used the Walsh tool wrong. I only selected the language that was "checked" in my keyboard settings and not ALL languages that were available on my phone. Once I selected all languages, the update went flawlessly.
---------- Post added at 08:43 PM ---------- Previous post was at 08:25 PM ----------
Did you also install the Windows Phone Support Tool? It may be needed for the Walsh Tool.
I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.
frazrasheed said:
I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.
Click to expand...
Click to collapse
Samsung Focus has two hardware revisions.
You will not be able to get passed the last steps to update to Mango if you have rev. 1.4
rev 1.3(Micron): Windows 7.5 update will be available through Zune on 9/27.
rev 1.4(LSI) : Update has not entered the AT&T SPE lab yet; however, Samsung is targeting for 10/17 lab entry and 10/31 TA"
you can check which revision you have by pulling out the battery. there should be a revision number on on a white sticker on the device.
I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?
frazrasheed said:
I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?
Click to expand...
Click to collapse
sounds like a USB driver issue.
open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0
if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.
I have exactly the same problem as Starsyde.
Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.
My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).
It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.
To sum up: nothing works.
Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.
mrrtt said:
I have exactly the same problem as Starsyde.
Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.
My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).
It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.
To sum up: nothing works.
Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.
Click to expand...
Click to collapse
odd, the latest drivers are 4.8.2345.0 and these were installed a week before Mango was released to prepare the phones for Mango. Not sure why it would give you an older USB driver....
I updated the USB driver but the problem stays the same, not sure what else could be done
derausgewanderte said:
sounds like a USB driver issue.
open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0
if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.
Click to expand...
Click to collapse
I'm been have the same problem with a samsung focus v1.3, i've tried everthing i could find, but nothing worked. I hope someone has an answer to what causing this.
I've reflashed the phone with both the rogers and at&t roms(many times) but can only get to 7403.
Also i have tried 4 different computers, one was ever XP.
i am getting the same update error with my Branded HTC HD7
Same error Omnia 7.
Posted it at MS forums: http://answers.microsoft.com/en-us/...-omnia-7/779a50b6-2080-40da-b106-c8b365c25372
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
DesiChoza said:
Same error Omnia 7.
Posted it at MS forums:
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
Click to expand...
Click to collapse
how did u revert back to 7392 update and which registry settings did you tweaked? would u mind sharing it with us? i have done hard reset on my phone but the os version is still 7.0.7043 and since i reset, there is no backup in zune to revert
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Try This?
fouros said:
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Click to expand...
Click to collapse
Not to be insulting, but did you try the Walsh Tool and select ALL languages that are on your phone. Most people who have gotten to the end of the MANGO update and failed with this error code fixed this with the Walsh Tool. Please don't dismiss it out of hand, it has solved this error code issue with a lot of people.
JamesAllen said:
Not to be insulting, but did you try the Walsh Tool and select ALL languages that are on your phone. Most people who have gotten to the end of the MANGO update and failed with this error code fixed this with the Walsh Tool. Please don't dismiss it out of hand, it has solved this error code issue with a lot of people.
Click to expand...
Click to collapse
i am not insuted and yes i did use the Walsh tool with the program saying my HD7 was not in a walshed state
pretty confused at the moment on what next to try
DesiChoza said:
Same error Omnia 7.
Posted it at MS forums:
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
Click to expand...
Click to collapse
Could you please elaborate?
Just to add to this, my brother inlaws focus, which i flashed with the rogers rom(It was a gift), installed the mango update yesterday morning. His phone is identical to mine.
fouros said:
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Click to expand...
Click to collapse
I am now on Mango
i had to use another telstra ROM for the HD7
http://forum.xda-developers.com/showthread.php?t=993186
installed this , forced update and now Mango tastes sweet

[SOLVED] Omnia 7 Update fail

Well... I have a strange issue... but on the other hand I feel I´m not alone. However it´s kind of messy trying to get a full picture from XDA how to get around my problem.
I have a 3-branded Omnia 7 with the following info:
OS 7.10.7720.68
Firmware 2424.11.9.1
Hardware 3.15.0.4
Radio Software 24.24.11.9.1
Radio Hardware 0.0.0.800
Bootloader 5.9.0.6
Chip SOC 0.36.2.0
My issue... well Zune keeps telling me Update 7740.16 is available (iI guess the Tango will come after that update, right?). I let Zune update but it comes back as a failure "error 80180048". Ok, so I tried to update using this guide http://forum.xda-developers.com/showthread.php?t=1306415
I got all files downloaded (lang files for each update... ) and it started ok... but after installation it came back with the same error as via Zune.
I tried to make a hard reset to eliminate the possibility that the unlock (rootacces) had anything to do with it... same problem.
As I understand I should go back to the Samsung Omnia 7 version as it came in the box, right? After that letting Zune handle the complete update from scratch? Well... how do I do that? I have found som threads but I´m not really sure witch one to use...
Can someone please give me some directions to get this to work? What files do I need and how do I restore the phone to it´s original state? (in the box-state).
I bought the phone secondhand since I use 3 (Three) in Sweden. I have had NO problem with it at all... But I get soooo anoyed with Zune telling me to update... so I thought "What the heck!?"...
Well... I guess I sorted it myself... followed the guide here: http://forum.xda-developers.com/showpost.php?p=11713948&postcount=1
I have to admit I was really uncomfortable doing this... But after getting the correct files downloaded it was really easy. The phone downgraded to the first version of Windows Phone 7... I screamed out loud when I saw the old green round Windowslogo... but after a couple og updates via Zune Mango was installed... the the updates rolled on and now I´m on the latest release. I feel quite happy since I don´t have to do this when WP 7.8 arrives this fall.
// Manneman

Categories

Resources