Hi guys I really need your help PLEASE,
I have only had my O2 XDA II Mini for 2 days, and I decided to upgrade the ROM early so I don't have to backup all my data before I have any (if you know what I mean).
Anyway, I went to www.seeo2.com to get the official upgrade. Clicked onto Oceania (i live in Australia), followed the instructions exactly for upgrade and downloaded the ROM upgrade. For everyones information the filename is ma_o2asia_11100_922_11100_ship.exe. Anyway, I had my device connected, had is synched up and started the upgrade process - at 11% an error appeared saying there was a RADIO ERROR and that I must restart the process.
I restarted the process, and an error came up saying ERROR 120: COUNTRY ID ERROR. And says that the ROM is not designed to be used on my device. I DOWNLOADED the Rom from the O2 website in the Australian section.
Now, my screen is stuck with SERIAL up the top and V.1.00 down the bottom when not connected to the computer, and USB up the top and V.1.00 down the bottom when plugged into the computer. The ROM upgrade continues to give me the same COUNTRY ID error.
PLEASE PLEASE HELP ME
Kindest Regards
Nick Chapple
Don't be lazy :!: .
All upgrade procedures are few times described in this forum, just read it.
Good luck
Related
Hi,
I tried to upgrade my Qtek S200 with the newest ROM release from PdaMobiz (the 16M pooling page one), but encountered some problems...
It's a Portuguese TMN Qtek (or at least it displays the operator logo when started), although the software is in English.
IPL is 2.09 and SPL is 2.15...
However, after upgrading it, it kept displaying the Operator logo with IPL and SPL, and freezed, so it never worked. When I tried to revert it, I wasn't able to do it, because every time I try to install a different ROM (all of them for the G3 device) it just installs the new ROM, and then goes to that screen and freezes...
It never gave me any error during the upgrading/downgrading, because when it checks the version of the ROM, it displays no information, so it just says that is going to replace the inexistant version with the new one...
Is there a step a missed (I didn't put it in bootloader mode before doing the first upgrade, but I had already done that before with other ROMs and it worked fine...)?
Now I'm stuck without knowing if I should have done an unlock CID before upgrading it, or if there is another steped I missed... Please help me out...
Thanks in advance,
Nuno
Tried this?
Read this in one of the threads and it solved his problem:
Extract the rom file you are using to flash your phone, to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility-NoVendorID.zip") into this folder. than connect your phone to pc and double click on "ROMUpdateUtility-NoVendorID.exe".
I personally have not tried it, but I downloaded the prog just in case, Hope it helps.
Now it gives me an error...
Hi,
Just tried what you advised, but now it jusk keeps giving me the error 208, which is supposed to happen because I have other programs open on my computer... Tried rebooting, closing most aplications with task manager, and still it doesn't work.
Also tried to downgrade to lower ROM upgrade, but it gives me the error that I can't downgrade, only upgrade...
When I upgrade it with AKU 2.3, it goes all the way through the upgrade, and then when it reboots, it just keeps giving me the operator logo screen with the version info on the display.
If I try to reboot to bootloader mode, I'm not able, the only way to do it is by removing the battery...
I'm probably still doing something I shouldn't... It should be able to work the downgrade utility...
Anyone can help?
Thanks,
Nuno
Try this rom:
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
It shoud be ok.
If your prophet has spl end up with 2.xx.0001 check at
ftp://xda:[email protected]/Uploads/Prophet/
find out the rom which can solve for SPL 2.xx.0001.
Good luck
Thanks Chan! Problem solved!
I was starting to review all my steps ir order to see what I could have done wrong...
Would you advise me to upgrade now to the PDAMobiz latest ROM (the one with the biggest pooling page)?
Thanks again.
Nuno
1. Unlock cid
Since your prophet spl is 2.15, you have to follow this step.
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437
From file you can get from ftp://xda:[email protected]/Uploads/Prophet/
Your PC has to connect to network or internet (to have ip address), becuase in that script use ping command for delay 4 seconds.
It's just downgrade and unlock cid.
You may verify if cid unlocked, by backup rom to sd card. (use romupdate.exe with r2sd all command, check at wiki)
2. Upgrade to official rom
ftp://xda:[email protected]_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. Upgade to pdamobiz, I suggest you to upgrade 12 Mb pagepool version. (even 8 mb version is ok). Because 16 mb has smallest ram space.
Good luck
All solved!
Again,
Thank you very much for your help!
After some tries, upgrading, downgrading, upgrading again, etc, I finally got it, so now its running the PDAMobiz version, which by the way, seems great so far!
Next time I'll come to you directly and then try to make things on my own...
Thanks again!
Nuno Eça
Hello, I hope to help me someone can. I implemented a while ago the t-mobile update on my MDA compact. Everything ran marvelously, until the MDA started again and remains in the Bootloader hanging. (in the display USB V stands 1.00) I have already tried with the nipple trick behind the Akkudeckel. Then Bootet it also, but if it starts again again, it remains hanging again in the Booteloader. I do not continue to know genuinly. I have also no Backup on SD Card. What am I to do? Thanks for your assistance.
Nexus404
Yehaaaa....
I have installed the last update from the T-Mobile Germany homepage. The Update was successfully
For the future I know, NEVER CHANGE A RUNNING SYSTEM
Thanks
waiting for reply too
I followed the instructions to upgrade to a Portuguese ROM
As discribed in
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
http://rapidshare.com/files/18878817/POR_11205_122_11210_ship.exe
At first place I got an error 120 country error
Then I tried MaUpgradeUt_noID.exe like i read in this forum.
I read that I could use an option in RUU.conf called [CHECKCEID_TYPE]=1
But with or without this option I get the Error 150 Rom Upgrade Utility Error saying this is not the apropriate rom upgrade version (with MaUpgradeUt_noID.exe).
When i use ROMUpgradeUt.exe I get the error 101. Connection error.
Right now my PDA is saying that is connected by usb, with 1.02 below without any blacklight.
I unchecked the USB connections but in my case is in windows mobile device center because i use windows vista business.
Please help me because i realy need this pda working.
Thanks a lot your time
same problem
i have the same problem with my s110
its still in usb or serial mode witout backlite
i dont now what to do so ist becomes still allive if you get any help let me nowh
hi there
i have a qtek s110 too and i'm pondering the upgrade to the port rom version.
i have been doing some research i think that the rom upgrade can only be done through windows xp.
have you both done it on vista?
that might be the problem...
i don't want to take any risks on doing it, so i'm still investigating...
well i updated or chaged the language on my magician last week also to portugees rom for a girlfrend with portugees background i know and she does not know english that good
from the opperating system i got the same errors as you guys discribe but when i did put it into bootloader mode ran the MaUpgradeUt_noID.exe en the upgrade whent smooth just try to run the upgrade again your device is already in bootloader mode as far as i understand i did the upgrade in XP not sure the same trick will work in Vista
I recently bought the Samsung i600 smartphone with WM5 built-in. Its unlocked and has no restrictions whatsoever. I've heard that WM6 has been released for the i600 in several countries. Can anyone here PLEASE provide me with the WM6 rom, aswell as a detailed instruction as to how to upgrade my WM6 i600 to WM6?
PS - i have visited the online upgrade link for WM6 on the samsung website, when i clicked on UK, it asks me for my i600 Version number. I entered my Version number but a system sign pops up saying "Please enter your i600 Version Number". Although i had entered it, it keeps on saying it again and again. my version number is in the following form --> "i600JVCG2"
Please help guys...i know everyone simply rocks when it comes to trouble shooting and stuff...would be looking forward to your help people!
Thanks.
I have the same problem when accessing that stupid website
My version is i600DXGE1. It displays a popup "Please enter ....." after I enter anything to the field. I also try with IE and Firefox but no success till now
to answer you guys there is a solution on a MODACO forum (google it up) find the largest topic that deals upgrading and go to page 15 and find a post written by 'xippon'. You'll find your answer there, and then you might be able to help me because every time i try to upgrade a firmware it says 'select an image to download'... What should I do, given the fact that i'm using XP, and following the directions to the letter.
Well, I've got to here trying to find a solution to what is not working from what is written there.
If I try to directly install the WM6 Upgrader, I get "Incorrect Software Version"
If I try to first install i600XXGD1 as they instruct, I get "Select an image to install" and there is nothing to select from.
I am lost.
Anyone here managed to solve this?
the way out
usamahahmad said:
I recently bought the Samsung i600 smartphone with WM5 built-in. Its unlocked and has no restrictions whatsoever. I've heard that WM6 has been released for the i600 in several countries. Can anyone here PLEASE provide me with the WM6 rom, aswell as a detailed instruction as to how to upgrade my WM6 i600 to WM6?
PS - i have visited the online upgrade link for WM6 on the samsung website, when i clicked on UK, it asks me for my i600 Version number. I entered my Version number but a system sign pops up saying "Please enter your i600 Version Number". Although i had entered it, it keeps on saying it again and again. my version number is in the following form --> "i600JVCG2"
Please help guys...i know everyone simply rocks when it comes to trouble shooting and stuff...would be looking forward to your help people!
Thanks.
Click to expand...
Click to collapse
try "i600XXCG2" instead of JV. maybe u can even try "XV".I donno whether they both need to be XX coz mine was DXCG2 already and i tried "i600XXCG2" and it worked. I think the CG2 is the sw version they need to confirm.Also, the download is only upto 31st oct, 2008, so make it fast!!Happy WM6ing!!
ps:yeah, and try in Internet Explorer.Other browsers' default settings might act up sometimes.
Hey guys, hope all is well..
I've made a complete 'pickle' out of my HTC Trophy (Vodafone NZ - Unbranded)..
I was happily using Ansar's europe Mango rom found from these forums for a couple of weeks only to notice that a few key features were not working, Local Scout would not identify anything in my country and Bing song recognition was not visible =/..
I had been given word that the official NZ rom had finally been released through Zune so I (Foolishly) thought it was as simple as flashing with the Vodafone NZ NoDo rom (Also found here by Ansar) and attempting to update the firmware through Zune as usual.. Boy was I wrong..
After the flash had been done, I noticed through Zune that the actual image of the device shown was not my Trophy.. It said 'HTC Trophy'.. But the image wasn't.. I chose to ignore that and attempt to update the firmware, it happily updated right up to 7403, but the following update from this (I assumed Mango) bounced back with the error 80180048..
I've looked through every possible source of knowledge on the net which led nowhere (Even attempted the unwalshing tool but it advised me my device wasn't walshed).. So I'm pretty much stumped.
If anyone at all can help me, I will have your babies..
=P
MVP
EDIT - If it means anything, The moment it goes to install the new firmware to the device that USB message pops up on my computer (Win 7) saying that the performance would be a lot better if I plugged it into a USB 2.0 port (Obviously it is..)
Also, on all the previous updates I get a status bar on the phone of how far through the update it is, when it is updating this last firmware I don't get this status bar, it just sits on the same image of the phone and pc with a crossed out arrow in the middle for about 10 minutes then reboots with the above error message