I have an un-branded Samsung Omnia 7 (Deutsche Telekom I believe). I did the force update for mango and was able to update to 7403 just fine. However, at the last step 2 of 2 of updating to 7720 it gave me the error code 80180048. I do not have a walshed phone because I tried using the walshed fix and the program said my phone wasn't walshed. Any one having this issue or have fix for this? Thanks.
All Languages
I was having a problem with failled Mango update and I discovered I used the Walsh tool wrong. I only selected the language that was "checked" in my keyboard settings and not ALL languages that were available on my phone. Once I selected all languages, the update went flawlessly.
---------- Post added at 08:43 PM ---------- Previous post was at 08:25 PM ----------
Did you also install the Windows Phone Support Tool? It may be needed for the Walsh Tool.
I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.
frazrasheed said:
I have samsung focus (from Rogers Canada) and am facing exactly the same problem, I have reset my phone a couple of times but still receiving the same error, am not sure what to do now, can someone suggest following steps? I don't have walshed phone and walsh tool gave me missing clsid exception.
Click to expand...
Click to collapse
Samsung Focus has two hardware revisions.
You will not be able to get passed the last steps to update to Mango if you have rev. 1.4
rev 1.3(Micron): Windows 7.5 update will be available through Zune on 9/27.
rev 1.4(LSI) : Update has not entered the AT&T SPE lab yet; however, Samsung is targeting for 10/17 lab entry and 10/31 TA"
you can check which revision you have by pulling out the battery. there should be a revision number on on a white sticker on the device.
I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?
frazrasheed said:
I have checked the focus revision number on my phone and it is 1.3, I found that one may use windows phone support tool to solve the issue, but it always gave me the 'the device not in connect to pc mode' error while I am pretty sure the device is infact that mode, so somehow it doesn't see that. I am still confused what to do now?
Click to expand...
Click to collapse
sounds like a USB driver issue.
open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0
if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.
I have exactly the same problem as Starsyde.
Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.
My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).
It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.
To sum up: nothing works.
Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.
mrrtt said:
I have exactly the same problem as Starsyde.
Forced update managed to get me through to 7403 and then on step 2 of 2 I get error 80180048. Tried at least 6 or 7 times and always get the same result.
My phone is also an Omnia 7 (bought it unlocked but has the Orange UK logo and apps preloaded).
It's not Walshed (I didn't even have an idea what that even meant until a couple hours ago but still tried that tool, just in case - it says "Good news, your phone isn't Walshed!") and the Windows Phone Support Tool says the phone's not in a "Connect to PC state", even though it is.
To sum up: nothing works.
Oh, almost forgot: I then saw the post about the USB drivers, it's version is 4.8.2148.0 but it says it's the last version so it won't update, and when I unsinstalled it, it automatically installed the same version.
Click to expand...
Click to collapse
odd, the latest drivers are 4.8.2345.0 and these were installed a week before Mango was released to prepare the phones for Mango. Not sure why it would give you an older USB driver....
I updated the USB driver but the problem stays the same, not sure what else could be done
derausgewanderte said:
sounds like a USB driver issue.
open Device Manager
open Zune
plug in the phone into the USB
In the device manager you should see Windows Phone USB Device at the very bottom come in.
Double click and double click Windows Phone USB. Got to Driver tab and make sure it reads Deiver Version 4.8.2345.0
if you have something older, uninstall the driver, unplug the phone, then plug it back in and hopefully it will pick up the new one.
Click to expand...
Click to collapse
I'm been have the same problem with a samsung focus v1.3, i've tried everthing i could find, but nothing worked. I hope someone has an answer to what causing this.
I've reflashed the phone with both the rogers and at&t roms(many times) but can only get to 7403.
Also i have tried 4 different computers, one was ever XP.
i am getting the same update error with my Branded HTC HD7
Same error Omnia 7.
Posted it at MS forums: http://answers.microsoft.com/en-us/...-omnia-7/779a50b6-2080-40da-b106-c8b365c25372
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
DesiChoza said:
Same error Omnia 7.
Posted it at MS forums:
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
Click to expand...
Click to collapse
how did u revert back to 7392 update and which registry settings did you tweaked? would u mind sharing it with us? i have done hard reset on my phone but the os version is still 7.0.7043 and since i reset, there is no backup in zune to revert
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Try This?
fouros said:
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Click to expand...
Click to collapse
Not to be insulting, but did you try the Walsh Tool and select ALL languages that are on your phone. Most people who have gotten to the end of the MANGO update and failed with this error code fixed this with the Walsh Tool. Please don't dismiss it out of hand, it has solved this error code issue with a lot of people.
JamesAllen said:
Not to be insulting, but did you try the Walsh Tool and select ALL languages that are on your phone. Most people who have gotten to the end of the MANGO update and failed with this error code fixed this with the Walsh Tool. Please don't dismiss it out of hand, it has solved this error code issue with a lot of people.
Click to expand...
Click to collapse
i am not insuted and yes i did use the Walsh tool with the program saying my HD7 was not in a walshed state
pretty confused at the moment on what next to try
DesiChoza said:
Same error Omnia 7.
Posted it at MS forums:
Edit: Fixed mine by reverting back to 7392 and fixing a couple of registry values for language packs. I wanted to remove the ones I didn't need. That created the conflict. Now I'm on Mango!
Click to expand...
Click to collapse
Could you please elaborate?
Just to add to this, my brother inlaws focus, which i flashed with the rogers rom(It was a gift), installed the mango update yesterday morning. His phone is identical to mine.
fouros said:
well i uninstalled and reinstalled ZUNE then flashed the 7004 Schubert rom
plugged in the HD7 went through the update procedure from 7004 to nodo it automatically updated to 7403 but it errored out on the final mango update
Click to expand...
Click to collapse
I am now on Mango
i had to use another telstra ROM for the HD7
http://forum.xda-developers.com/showthread.php?t=993186
installed this , forced update and now Mango tastes sweet
Related
Today Zune prompted that the update is available so I started the update. It fails every time I try to update my phone :-(
I am already om 7720 but still Zune (and my Phone) pop up the update message.
I even did a full reset of my phone but still the update fails.
At step 5 it stays on 0% and the phone restarts.
Then step 6 and 7 (installing updates) ... again the reboot ..
Message on the phone:
Update Unsuccesfull
Unfortunately , we weren't able to update your phone. Refer to the Zune software or Mac Connector on your computer to find out what happened. Or if your're already closed this software, go to windowsphone.com for guidance.
See attached pictures.
Error code which I get is: 8018001E.
Need Help!
If you already did a full reset you can as well roll back to NoDo from your backup and try from an offically support version (7392).
How do I roll back?
rudma said:
How do I roll back?
Click to expand...
Click to collapse
Friend, if you have to ask this question, then I'm wondering if you truly knew what you were doing.
---------- Post added at 03:02 AM ---------- Previous post was at 02:58 AM ----------
Ok, I used to get this error when I tried to update my firmware by changing my carrier code using Samsung Registry editor. As it turns out, Samsung firmwares are kinda locked to carriers. I tried Tmobile, Orange but the firmware would not install, getting the same error code as you did.
I had to wait for Samsung to release the firmware for my carrier.
Did you do anything to your LG phone? Like changing carrier code? If you did, you'll have to change it back.
Seems to be pretty common problem for LG E900: answers .microsoft .com/en-us/winphone/forum/wp7-sync/lg-e900-update-error-code-8018001e/1ec8d54d-0ee8-4db6-ab62-4ca26b3fbbe7?page=1&tm=1317157055038
(can't post links yet)
I'm experiencing it too... ;/
Ok, I will chech the link later.
Thanks!
Hmmm
I think I figured out what is going on. Apparently Mango needs the latest firmware from LG to be installed on the phone. This was given to branded phones but not to unlocked/unbranded phones like mine, a few months back. With the firmware update the LG Optimus 7 will jump from:
Firmware Rev 1.0.7.10
Hardware Rev 1.0.0.0
Radio Software 1.0.7.10
Radio Hardware 0.3.5.0
Bootloader Ver 1.5.0.0
Chip SOC 0.30.2.0
to:
Firmware Rev 1.0.10.10
Hardware Rev 1.0.0.0
Radio Software 1.0.10.10
Radio Hardware 0.3.5.0
Bootloader Ver 1.5.1.0
Chip SOC 0.30.2.0
People who successfully updated their LG E900 to Mango already had that phone, from the little research I have been doing in the past few hours. So all we need is the firmware update from LG to be installed and I am hoping that this will allow us to go ahead and install Mango.
______
Marios
www.kariosgames.com
I deleted the Now App because it was acting up so i uninstalled it and tried to reinstall it, but now it says your phone is not up to date...but I do have mango RTM and it was working before, what's going on??
Same problem
I did a hard rest and tried to reinstall the Samsung Now app, but was unable to install. This was after I updated to Mango. I hard rest the phone 2 more time with no luck. When I first updated I was able to install the Now App to the Mango Version. I now get the marketplace error (80330011). Also when in the Samsung Zone the Now App now states That (This app is not available for your device. Tap here for more info. When I tap I get the (App. not Available. This might be because your phone software needs to be updated, the app is exclusive to a different mobile provider, or the app is not available in you region.)
OS Version 7.10.7720.68
Firmware 2103.11.81
Samsung Focus 1.3 AT&T
you can sideload the latest Mango enabled Now xap if you are unlocked.
follow this post.
i am dev-unlocked, but sideloading the app doesn't seem to work. Any idea why this is happening?
There is a non-patched version of Now posted by @derausgewanderte (thank you man)
Take it @mmian : Now - v2.3.0.1 (patched).xap
poloche said:
There is a non-patched version of Now posted by @derausgewanderte (thank you man)
Take it @mmian : Now - v2.3.0.1 (patched).xap
Click to expand...
Click to collapse
you can use this to sideload the app. Once you have this application you also don't need to search the net for a patched version of the xaps you find. it works
I'm experiencing this too. My phone isn't dev-unlocked so I'm hoping it's a temporary marketplace issue.
When I first updated to Mango (right after a reset) I downloaded the new Now app without any issues. I've since reset again to add an SD card and now cannot update it. Argh.
Also, I wish they'd use the same font for the temperatures on the Now Live Tile as the rest of the OS.
I have the same problem.
I upgraded my phone (not unlocked) all the way from its original version 7004 through mango RTM to mango and could update samsung now to the latest version. I saw the new features they introduced.
Then I wanted to unlock the phone -> reflash to 7004 and go to mango again. samsung now wouldn't update in marketplace (don't remember exact error code) but other apps like diary could be installed. I uninstalled 'now' and when i tried to install it it said (is not compatible with your phone".
The only difference between the first and the second version of mango on the phone:
- the first time I flashed the firmware using signed_CSC_Cetus_Europe_I8700BSEJK1.csc
- the second time I flashed the firmware using signed_CSC_Cetus_Europe_I8700DBTJK1.csc because I was told this is the right file for an unbranded omnia7 for germany
- after I've flashed the second time, zune did not find an update after I had 7008 on my phone -> needed to use the "disconnect from internet" solution to upgrade
However, in the end all drivers have been updated:
Os: 7.10.7720.68
firmware: 2424.11.8.5
radio: 2424.11.7.2
bootloader: 5.8.1.9
Does it really depend on the .csc and the active region that "now" can't be installed? but why should it be disabled for germany, I already used it in my unlocked mango version and they have german news and all that stuff.
with WP7Downloader, I could flash the csc to BSEJK1, probably I'll give it a try.
probably related:
IIRC, the unlocked mango installed a version of the diagnosis app starting with 1,
now (mango unlocked) I have "diagnosis_DU (ver. 0628). Is this the correct one? when I start the GPRS manager, I don't get a nice combobox for "select GPRS" anymore, the options are displayed in a listbox which is too small to show all entries. in "unlocked mango" the UI looked nicer, now it looks kind of ugly or just wrong however, it still works and unlocked mango as intended
And yes, I uninstalled the app, rebooted the phone and installed it again using ##634#.
Hey guys, hope all is well..
I've made a complete 'pickle' out of my HTC Trophy (Vodafone NZ - Unbranded)..
I was happily using Ansar's europe Mango rom found from these forums for a couple of weeks only to notice that a few key features were not working, Local Scout would not identify anything in my country and Bing song recognition was not visible =/..
I had been given word that the official NZ rom had finally been released through Zune so I (Foolishly) thought it was as simple as flashing with the Vodafone NZ NoDo rom (Also found here by Ansar) and attempting to update the firmware through Zune as usual.. Boy was I wrong..
After the flash had been done, I noticed through Zune that the actual image of the device shown was not my Trophy.. It said 'HTC Trophy'.. But the image wasn't.. I chose to ignore that and attempt to update the firmware, it happily updated right up to 7403, but the following update from this (I assumed Mango) bounced back with the error 80180048..
I've looked through every possible source of knowledge on the net which led nowhere (Even attempted the unwalshing tool but it advised me my device wasn't walshed).. So I'm pretty much stumped.
If anyone at all can help me, I will have your babies..
=P
MVP
EDIT - If it means anything, The moment it goes to install the new firmware to the device that USB message pops up on my computer (Win 7) saying that the performance would be a lot better if I plugged it into a USB 2.0 port (Obviously it is..)
Also, on all the previous updates I get a status bar on the phone of how far through the update it is, when it is updating this last firmware I don't get this status bar, it just sits on the same image of the phone and pc with a crossed out arrow in the middle for about 10 minutes then reboots with the above error message
Any one got tango update on their samsung omnia w or focus flash?or on any other samsung windows phone?
No, I am updating it manually... I'm from Brazil.
http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929
godoy.rafa said:
No, I am updating it manually... I'm from Brazil.
http://forum.xda-developers.com/showpost.php?p=27960331&postcount=929
Click to expand...
Click to collapse
did you successfully updated it? Im having problem with my zune, coz it says, "cannot check updates at this time". they might be preparing an update. but... still not sure if i will still keep my phone. Maybe i will sell it later.
Use the cab sender method. It worked great for me.
So I used the disconnect internet trick and got Tango to install on my phone. Problem is, it stopped with the 3 updates and did not install (or find) the Samsung one that I know was supposed to be installed (for firmware), so my firmware is now 2103.11.10.1 instead of what it is supposed to be.
Does anyone know a way to force the OEM firmware to be sent to Zune. The internet disconnect trick isn't work now, so I'm stuck. Also, my backups aren't showing up, even though during the update process it said it was creating a backup (for all the OS updates it installed all the way up to 8773).
If there is no way to get the OEM firmware to be pushed, does anyone know how to get the Focus Flash to stock? I know I have a backup on my computer, but Zune isn't recognizing it (I had forced 8107 on my phone, and Zune made a backup of that ROM).
b4malevolent said:
Use the cab sender method. It worked great for me.
Click to expand...
Click to collapse
im getting this error
Error: The installed version of ZuneWMDU (4.8.2345.0) doesn't match the tool ver
sion (4.8.2134.0).
Top tip!
Hi,
Just reset your phone, format it and then go on with setting up your windows live id. Once fully synchronised, then switch over to zune and go to settings and press forget this phone, after which just connect your phone and you'll get all the updates steady!
Worked well for my Omnia W here at Dubai.
:angel:
tango update for omnia w is out there is way to force zune player for update; get it here
Samsung Omnia w tango update is out
Guys any news on Samsung focus (1st generation) tango update?
thanks a lot
Update
owenliu said:
thanks a lot
Click to expand...
Click to collapse
Just Get the TANGO Update....... (Samsung omnia w{DEV UNLC})
There is no reason to update Omnia W, ver 8107 already have all the things, at least unbranded versions.
Next step for Omnia W is 7.8
Well... I have a strange issue... but on the other hand I feel I´m not alone. However it´s kind of messy trying to get a full picture from XDA how to get around my problem.
I have a 3-branded Omnia 7 with the following info:
OS 7.10.7720.68
Firmware 2424.11.9.1
Hardware 3.15.0.4
Radio Software 24.24.11.9.1
Radio Hardware 0.0.0.800
Bootloader 5.9.0.6
Chip SOC 0.36.2.0
My issue... well Zune keeps telling me Update 7740.16 is available (iI guess the Tango will come after that update, right?). I let Zune update but it comes back as a failure "error 80180048". Ok, so I tried to update using this guide http://forum.xda-developers.com/showthread.php?t=1306415
I got all files downloaded (lang files for each update... ) and it started ok... but after installation it came back with the same error as via Zune.
I tried to make a hard reset to eliminate the possibility that the unlock (rootacces) had anything to do with it... same problem.
As I understand I should go back to the Samsung Omnia 7 version as it came in the box, right? After that letting Zune handle the complete update from scratch? Well... how do I do that? I have found som threads but I´m not really sure witch one to use...
Can someone please give me some directions to get this to work? What files do I need and how do I restore the phone to it´s original state? (in the box-state).
I bought the phone secondhand since I use 3 (Three) in Sweden. I have had NO problem with it at all... But I get soooo anoyed with Zune telling me to update... so I thought "What the heck!?"...
Well... I guess I sorted it myself... followed the guide here: http://forum.xda-developers.com/showpost.php?p=11713948&postcount=1
I have to admit I was really uncomfortable doing this... But after getting the correct files downloaded it was really easy. The phone downgraded to the first version of Windows Phone 7... I screamed out loud when I saw the old green round Windowslogo... but after a couple og updates via Zune Mango was installed... the the updates rolled on and now I´m on the latest release. I feel quite happy since I don´t have to do this when WP 7.8 arrives this fall.
// Manneman