with any call i get, the volume is really loud. ive used my volume button to set it to the lowest setting and the person is still loud enough to hear if im holding the phone a couple of inches away from my ear. am i the only one experiencing this issue, and if not how do i remedy this issue? thanks for any help you can give. btw im running 7.1.0.1, stock cm kernel, and installed it through cwm.
Are you suggesting the speaker comes on automatically when you receive a call?
if its what i have, no. when i recieve a call, the in call volume is set to max, regardless of what the actual volume setting is. it is quite deafening. lol. anyways, when i use the volume rocker, the volume will still change, but then the next call will have the same issue. its as if the phone automatically resets the volume to max somehow. any help would be appreciated. thanks!
nytefyre said:
if its what i have, no. when i recieve a call, the in call volume is set to max, regardless of what the actual volume setting is. it is quite deafening. lol. anyways, when i use the volume rocker, the volume will still change, but then the next call will have the same issue. its as if the phone automatically resets the volume to max somehow. any help would be appreciated. thanks!
Click to expand...
Click to collapse
yeah, thats the same issue that i have been having. the closest thing i have found to a fix is to hit the volume up then volume down, then the volume will go down. but that has to be done on every call. i was/am hoping there will be a fix for this that will keep it down permanently
Related
hi,
i have recently purchased the chamelon headset for my tmobile mda2(himalaya). with the help of bluetooth tools for pocket pc i have been able to bond the 2 devices successfully and have achieved a fair working state between both devices. however there is one problem that cannot be avoided. it seems like the volume output on the headset is very low, its very difficult to hear anyone on the other end. the manual states that while in call you can turn up the volume until you hear a beep to indicate the volume is at its highest setting. despite numerous attempts at trying to get the volume higher i have not had any success. while in call i try to press either buttons and there is no change in volume. i have heard a beep a few times after 20-30 consecutive presses but i didnt notice much or if any change in volume. is there anyway to adjust the volume on the headset while not in a call? im not sure whether this may be a problem with the chameleon or perhaps a problems with the bluetooth in the microsoft OS?
Anyone else experience problems like this?
Maybe the Chameleon suffers from the same feature as my BTH-808 headset: When I use it in my right ear the volume-down button (on the side of the headset) is likely to press on my ear and thus . . . .minimizes the volume.
Work-around: use in left ear or ut in with care.
Same behaviour as you describe in changing volume. You have to press the volume-up button approx once every 1-2 seconds for the volume to go up one step.
Took me a week to find out what happened . . .
sigh. i wish it was that simple.
it seems like i have got the headset to its highest volume and it still sounds very weak. nextlink support tells me the volume on the bluespoon is generally very loud.
man... the BT on this machine is really a nightmare.
have you tried to put volume higher like I mentioned. When I press the volume-up to quick, It simply stays low, although I hear the 'volume-up beep'!!
Otherwise: Back for warranty I guess
XDA II2........I couldn't understand why I missed calls when out and about. Not every day.......but would go through a day when everytime I checked my phone I had missed calls.
Why??
Its because the volume in the ear is the same as the ring tone!! So if I took a quite call, I would turn the vol up hgh. On hang up, no probs to hear the phone ringing. However, I get a call where the voice is very loud,so turn the volume down. Hang up.....and miss a load of calls cause now the ring tone volume is very low!!
Great phone/pda.......but the ring tone and vol in ear are the same!! any patches for this??
Mike
Are you using non default ringtone?
If you said the ringtone is the same volume as the sound volume of your ear reception, and you are using default ringtone... whopsss... ain't that too loud .
cheers,
cyberjaya
Vibrate might help you.
I don't get what you mean...
If I take / make a call, I can turn the earpiece volume up or down independant of the setting for ringtones / notifications.
I tested this...I made a call and turned the volume right down on the earpiece...then I ended the call and checked the volume sliders...both of them are in the same place as they were before. I then rang my 2i and the volume level was the same as it has always been.
Am I getting the wrong end of the stick?
I'm not sure if this is only me, but I find the call volume on the S6 extremely low.
Can anybody agree with me?
Mines is fine but you can try the extra volume option..
this started from yesterday evening, i'm watching youtube and the volume is annoyingly low, i increase the volume by using the volume rocker on the side of the phone but the volume is still the same, i go into settings and change the volume level from there and it suddenly goes into max volume.
then today after i had set the alarm clock i couldn't hear anything because yet again the volume had suddenly gone down again at this point i have no idea what is causing it, i don't have any bluethooth devices connected to it, no headphones, nothing in the headphone jack so i'm clueless as to what is causing it my phone is not rooted either.
this is frustrating me as i use my phone for a alarm clock and i can't rely on it for now due to this issue, no idea where to start with it.
so the volume is low, i increase the volume with the rocker no effect, i then go into settings and adjust the volume from there it goes back to high volume and then after a while it goes back to low volume again without any input from me.
If your device is rooted, I recommend you try Viper and see how it will help react.
I did say I didn't have root from the start.
anyways I'm thinking it may have a link with the latest update that was pushed, it was the October security update, this is when the problem started so it may have effected it.
Hi guys,
I noticed a week ago that while listening to a WhatsApp voice message I was unable to change the volume using the volume rocker.
I thought this very strange. Then while in the car listening to a podcast via Bluetooth I noticed the audio would stop, then maybe 5 minutes later start again by itself, then stop again (sometimes for ages) then start again.
I've now noticed that the audio was switching to in call volume ( active and green) during the times the audio stopped. As soon as it decided I wasn't on a call it would then default back to media volume and things would start playing again.
So my bloody phone thinks either a call is coming through or I'm on a call yet neither of these things are true.
Very very very frustrating!
Has anybody experienced this? What could this be and how can it be fixed?
Thanks
Bump
homerlovesbeer said:
Bump
Click to expand...
Click to collapse
I am still not able to understand your issue clearly but could it be bad proximity sensor?
Thanks for replying.
My phone has "in call volume" active sometimes even though not on a call. When you press the volume rocker on the side it is active (highlighted in blue) when it shouldn't be.
When active it cuts out all other media.
Then sometimes it's normal where in call volume not showing (not active) when you press the volume rocker so I can play media, (media volume shows active when pressing volume rocker) just the way it should be.
It's totally random.
I'd that clearer?
Thanks!
homerlovesbeer said:
Thanks for replying.
My phone has "in call volume" active sometimes even though not on a call. When you press the volume rocker on the side it is active (highlighted in blue) when it shouldn't be.
When active it cuts out all other media.
Then sometimes it's normal where in call volume not showing (not active) when you press the volume rocker so I can play media, (media volume shows active when pressing volume rocker) just the way it should be.
It's totally random.
I'd that clearer?
Thanks!
Click to expand...
Click to collapse
Do you have smart connect installed? In past I have experience something similar while using smart connect.
Like sometime it acts as if headphone is connected when it's not and you don't hear anything when you play media.
I haven't, and I don't know what smart connect is but my issue isn't it thinking headphone connected, it thinks it's on a phone call