My VOX has stopped communicating to my router. This appears to have happened since I accidently deleted profile but that could be co-incidence..
It sees my network...
Settings VOX
Net type INTERNET
Auth WPA 2
AES
USE IEEE 802.1x YES
AEP type: Smart Card or certificate
Settings WAG200G nothing really relevent here except to say AES as above.
My phone seems to connect WITHOUT encryption but when I add encryption (with real simple password) this is where the phone can't connect for some reason... My laptop is still connected to the router without any problems there is no MAC filter or anything like that.
Anyone please help!
BTW tried hard reset not helped.
i have the exactly same problem. i tried other kinds of config on my router but nothing worked.without encripton or password it connects...
Not connecting to WIFI
Seems more people have this problem?
WPA2 does seem to be a problem. Personally I also use fixed IP, but never got my phone connected to my home network.
@work I use WEP and DHCP, no problem connecting.
@home I use, as mentioned, WPA2, AES, Fixed IP, router.
If anybody got a simple answer...?
btw, I got this problem after using other roms(for almost a year now). Basic HTC rom (WM 6.0 :-( ) seems to work fine.
Half connected in fact
Hi, I'm also getting a wifi problem after installing the RUU_Vox_HTC_FRA_1.34.406.1_4.1.13.54_03.10.90_Ship ROM (and thus resetting everything in the profile), but I wonder if it's really the same thing.
My phone connects to the wifi, gets an IP (both the phone and the router show the same IP attributed), but PIE and Outlook Pocket can not use the network. It's just like they couldn't see the network. But they don't use Edge either to connect, so they probably somehow try to send data to the network,but they fail.
Oh, and WEP encryption changes nothing. And I can't test with fully removing the encryption, as I use an internet box, not a standard router.
What I don't get is that I was browsing just fine on this ROM and the same config in my router I wish someone with more knowledge would spare a minute to help us out here or at least point us in the right direction
Solved
I upgraded the firmware on my router... :d thx
Need a little help. My G-tab is running current VEGAn-TAB rom. I am having problems getting the wifi to actually connect. My icon shows a good signal, and inside the wireless settings I am showing connected to my wireless network. I also went to advance settings and made sure wifi never sleeps. All apps that need internet connection (market, browser, etc.) show no data connection.
Used yesterday with no problems. My laptop is running on same network and working fine.
Any ideas?
have you restarted? Sometimes happens to me too but it's nothing a simple restart can't fix.
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
TexasZac said:
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
Click to expand...
Click to collapse
Could be competition on the 2.4 GHz frequencies. Some wireless phones and even microwave ovens can trash a wifi connection.
Moved to general
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
LittleBirds said:
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
Click to expand...
Click to collapse
No problems with home WEP, office WPA2-PSK and several wide open public ones. I just wish the damn thing would auto-connect to the ones I have been to before.
outofoffice said:
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
Click to expand...
Click to collapse
My only guess is, if its a 5Ghz N Router you should check to see if it allows
2.4Ghz signals and not just 5Ghz. The GTAB doesn't seem to support connections at 5Ghz.
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
I don't have a lot to add to help you troubleshoot, but I can say that I am running VEGAn Gingerbread RC1 with pershoot's latest kernel. I am able to connect at home on a WAP2-PSK (Linksys Linux based G/N) at home, WAP2-PSK at the cabin (Linksys's cheapest G/N), and at work on a 802.1 EAP network (Cisco).
I has some unexplained issue mounting the internal storage on a computer. After a little head scratching, I started to wonder if it had something to do with the custom kernel I was running. I flashed Pershoot's latest kernel and my problems went away.
I mention all that to suggest that you might try flashing a different kernel and see if you get different results.
I have an issue with vegan where when i reboot the device (or turn off and turn on) wifi is off even if left on when turning off, i have to manually turn on wifi after every boot.
Sent from my DROIDX using XDA Premium App
fajordan said:
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
Click to expand...
Click to collapse
Have you checked to see if you're using MAC address filtering, and if so, that your gTab's MAC address has been added to the whitelist on the router? I get the feeling that that may be the issue. You have the WEP key on your device, but your router's still blocking it. I'm running the same ROM you are, and have had absolutely no troubles connecting to my work network with 802.1 PEAP, WPA/WPA2-TKIP and AES at home, and multiple makes/models of access points/routers.
Hmmm. Just reread your original. Now I'm wondering if you have enough DHCP leases available on your router. If you're out, you'll have to wait until a lease expires or add some more to your scope of addresses.
Hope some of that helped in some way...
Hey,
Was wondering if anyone had any solutions to this issue.
I can connect to my router with the asus transformer, successfully get an IP, but can not connect to the external web. I can make internal connections, but again, nothing external. I have no problem with my samsung sgs i9000m, various laptops, ipod touch, etc etc..
The router in question is a speedtouch 780 (dsl modem, voip, and router in one). Ive tried various encryption schemes, and even tried to leave it open but to no avail.
I can create a wifi network with both my imac, and with my samsung sgs and the transformer can connect, and also move internet data!
Very weird, I dont even know where to start trouble shooting, can anyone help?
aquenne said:
Hey,
Was wondering if anyone had any solutions to this issue.
I can connect to my router with the asus transformer, successfully get an IP, but can not connect to the external web. I can make internal connections, but again, nothing external. I have no problem with my samsung sgs i9000m, various laptops, ipod touch, etc etc..
The router in question is a speedtouch 780 (dsl modem, voip, and router in one). Ive tried various encryption schemes, and even tried to leave it open but to no avail.
I can create a wifi network with both my imac, and with my samsung sgs and the transformer can connect, and also move internet data!
Very weird, I dont even know where to start trouble shooting, can anyone help?
Click to expand...
Click to collapse
Sounds daft but i assume to have tried rebooting the router .... my router occasionally gets confused based on the sheer number of wifi hardware we have in the house .... otherwise have you tried changing the wifi channel ? read somewhere else that people were having problems with channel 13 ???
hey thanks for the reply.
Yes probably rebooted the router a half dozen times, restored firmware, no go.
Ive bounced around a few channels, doesnt seem to have any effect.
Im really stumped!
aquenne said:
hey thanks for the reply.
Yes probably rebooted the router a half dozen times, restored firmware, no go.
Ive bounced around a few channels, doesnt seem to have any effect.
Im really stumped!
Click to expand...
Click to collapse
so im assuming you cant even get to the market ?
no not via the router, the little wifi icon at the bottomcorner stays gray (means connected, but not to the google servers, it goes blue when it does connect to the google servers.)
It does connect and go blue when i create a wifi network from my cell phoneusing my cell data connection
aquenne said:
no not via the router, the little wifi icon at the bottomcorner stays gray (means connected, but not to the google servers, it goes blue when it does connect to the google servers.)
It does connect and go blue when i create a wifi network from my cell phoneusing my cell data connection
Click to expand...
Click to collapse
well on the plus side that implies its not a TF hardware or setting issue
not sure I can help on the router front as im no expert have you checked what IP address its allocated ? are you able to see the TF from the router info page ?
wilbur-force said:
well on the plus side that implies its not a TF hardware or setting issue
not sure I can help on the router front as im no expert have you checked what IP address its allocated ? are you able to see the TF from the router info page ?
Click to expand...
Click to collapse
yeah im thinking its a router issue.
i can see the transformer, it appears to look exactly the same as all other wifi devices that connect to the router...
stumped =/
Under your wifi settings long press your wireless network under the list of networks available, you should get a "modify network " link pop up, change the setting from DHCP to Static and enter your settings manually. Had a similar issue with an iPod touch once, wouldn't go on the internet unless it had a static address even though all settings were identical to what it pulled from the router using DHCP.
Update Transformer firmware? Leaked official 3.1 is out has updated wifi drivers too.
If no go after that, factory reset the Transformer.
nxt said:
Update Transformer firmware? Leaked official 3.1 is out has updated wifi drivers too.
If no go after that, factory reset the Transformer.
Click to expand...
Click to collapse
I have the same problem with my TF101, I did all of the above, but the WIFI indicator stays grey. I have a good connection with my router.
When I connect with the router at my work, I have the same. So, the problem is TF101 related. When I bought it two weeks ago, it worked. Two days ago I flashed Prime 1.4, and that worked too. Since yesterday I have this problem, and I tried all to solve it. Other firmware, factory reset....everything. Can somebody please help me with this?
Not sure what this issue is, I never had it with the previous WiFi build, only after the 3.1 changes. I have had several occasions where sitting within 5 ft of router, it would not connect. reboot solved it each time, but I have noticed that it appears dependent on when you unlock during the boot sequence. If you let the boot sequence complete before unlocking, it never happens. If you unlock during the boot sequence, it might.
ASUS Tech Support please note.
@rumbleweed : thanks for the response!
Update : I pushed the original 3.0.1 WW blob to /data/local/ with ADB to unroot my TF101. After that the WiFi icon stayed gray, but I had a working internet connection. Later I updated it to WW 3.1. To be sure I did a factory reset, and now it is working again. First the WiFi notification icon stays gray for a few minutes, but after that it went to blue. I have a unrooted 3.1 WW TF101 now, but I'm happy!
aquenne said:
Hey,
Was wondering if anyone had any solutions to this issue.
I can connect to my router with the asus transformer, successfully get an IP, but can not connect to the external web. I can make internal connections, but again, nothing external. I have no problem with my samsung sgs i9000m, various laptops, ipod touch, etc etc..
The router in question is a speedtouch 780 (dsl modem, voip, and router in one). Ive tried various encryption schemes, and even tried to leave it open but to no avail.
I can create a wifi network with both my imac, and with my samsung sgs and the transformer can connect, and also move internet data!
Very weird, I dont even know where to start trouble shooting, can anyone help?
Click to expand...
Click to collapse
Hi i had this same problem when i first unboxed my Asus TF, Wifi said i was connected to my Linksys router, and i even had an IP address but no internet.
In my frustration y plugged it to my PC which is connected with an ethernet cable to the router and voila, internet icon changed from grey to blue and 2 small arrows started to appear. The internet was now working and i updated the thing from 3.0 to 3.2.
Not sure why this happened but ever since that time i have no problems connecting even on different routers and modems.
Hope this helps.
Had this problem myself from unboxing, tried everything suggested and still no joy.
went and got a linksys router to replace my dlink, everything working fine. tried it with a few networks now and seems to be a problem with dlink routers.
I have this same issue at my school. Up until 3 weeks ago it would always give me blue, then randomly it started staying on white. I can use the net, just not connect to the Google servers.
It works fine everywhere else.
Strange.
Try playing with the wifi disconnect policy?
having a different problem here. been using my home internet since unboxing. all was fine. then one day the connection was grayed. tried rebooting and everything didnt work. i went to setting, clicked forget network. then it never appeared again.
and yeah, its a dlink router. any help ?
Problem: fixed!
I had a solid wifi connection most of the time, complete with a solid blue wifi icon. But my wifi was EXTREMELY slow and intermittent. After a great deal of forum searching and trying every possible suggestion, the solution that finally worked for me was to change the channel on my router from 'Auto' to 6. Flawless connection now, and no more dropped signal.
Hi there,
I tried one thing - took off the lock feature from my transformer and now it's back to normal.
If I turn it back on I am back to square one.
Can anyone figure out how the lock feature affects the WIFI connection ? Is there a bug and is there a fix ?
b4dad said:
Had this problem myself from unboxing, tried everything suggested and still no joy.
went and got a linksys router to replace my dlink, everything working fine. tried it with a few networks now and seems to be a problem with dlink routers.
Click to expand...
Click to collapse
Jumping in a bit late, but am having similar issues. Just got my TF but have not been able to connect to my dlink router (dir-655 - onlyl couple months old). The router works fine for everything in the house. I know the settings well and have tried many things (went through all channels one by one, messed with different WPA security options, even removed security, etc). Nothing allows me to even connect to the router/network.
In the Wifi settings is jut keeps saying 'connecting...' and 'scanning...' over and over. I am about to take this thing back as I really can't buy a new router at this point (no new firmware for router is available by the way, I checked).
Has anyone confirmed that dlink routers can work with the TF and if so, what are the settings you are using (channel, WPA security settings, dhcp or static, etc)?? This driving me nuts. I want to keep this TF but won't if I can't get it to work at home.
Oh and by the way, when I use my Droid Inc 2 as a hotspot with WPA security, the TF connects without issue. So the TF appears to be fine, it is definitely related to the dlink router.
Thanks!
Hey guys/gals, I have a problem with setting up the wifi on the tab 7.0 plus.
It sees my SSID - I enter in the password, it says obtaining IP - but is stays there never actually giving me an IP from my router. I get signal strength, etc. but I cant access the net.
So i decided to try to set a static IP, but that did not work either (but not sure I did this entirely correctly, so ...)
Any solutions? Whats the problem? it can be that hard....
Shftup said:
Hey guys/gals, I have a problem with setting up the wifi on the tab 7.0 plus.
It sees my SSID - I enter in the password, it says obtaining IP - but is stays there never actually giving me an IP from my router.
Any solutions? Whats the problem? it can be that hard....
Click to expand...
Click to collapse
The likely problem is that DHCP isn't running on your network (or isn't working.) DHCP is something that usually will run on your router and assigns IP numbers to devices that connect to it. It's also possible that DHCP is working fine, but you have MAC Address filtering enabled on your router (which basically limits which devices can attach to your network.)
Finally, it might simply be a router incompatibility (though I haven't seen that very often.)
As to how to resolve those things... I can't answer that... I don't have the same router you do (unless you just so happen to have a linksys E4200), so can't walk you through reconfiguring it.
Good luck
Gary
Had the same problem at the beginning when I unboxed my Tab for several times. After few resettings my router an Tab it finally started to work and since that moment couple of days without any issue. So don't know where was the problem..:-(
I also had DHCP issues upon unboxing the tablet. When it first powered up and tried to connect to my D-Link router, my Wi-Fi would go offline. All of my other connected devices would also go offline. After pondering this bizarre behavior for a few moments I decided to turn off the tablets wifi. The router and other devices magically came back online and connected.
After repeating this several times just to make sure I wasn't seeing things I assigned a static IP to the tablet. Everything worked fine after that.
What I think was happening there was that the tablet was trying to grab the router's IP address and that was knocking everything offline. This is just a guess though. Maybe someone with more network saavy than me has some thoughts?
thanks i will try these tonite and reply back.
My Tab is rooted, but I dont believe that matters, correct?
Yes it shouldn't matters...
So i played around, couldnt get DCHP to work for an IP. So i went back to creating a static IP - i missed 1 digit on DNS1 the first time which is why it didnt work last night. Once the static ip was up - boom.....magic. I called samsung support, they indicated that this is a know issue with some home routers (mine is a 2wire) and that a static IP is the solution.
thanks for all the tips above, much appreciated.
My Nexus 5 (6.0.1) will not connect nor see the SSID of a specific WiFi router. This just started about 20 hours ago, and would connect just fine prior.
Router/Modem is TP-Link TD-W8961N
Turned WiFi off/on multiple times, both phone and router
Rebooted both phone and router
My computer and iPad see and connect just fine
The phone sees and can connect to other SSIDs
Tried manually adding the SSID and password
Connected (via computer) to the router settings page... pretty sure there is no MAC filtering -- It's in Turkish, can't find where to change to English.
Please help!
Did you try changing the router ssid to something else? Is the ssid being broadcast?
audit13 said:
Did you try changing the router ssid to something else? Is the ssid being broadcast?
Click to expand...
Click to collapse
SSID was being broadcast, did not try changing the SSID.
However, when I woke up this morning, all was well. Not sure why it went off line, nor why it came back up. Thanks for the suggestion, Ill keep it in mind if it happens again.