Hey,
Was wondering if anyone had any solutions to this issue.
I can connect to my router with the asus transformer, successfully get an IP, but can not connect to the external web. I can make internal connections, but again, nothing external. I have no problem with my samsung sgs i9000m, various laptops, ipod touch, etc etc..
The router in question is a speedtouch 780 (dsl modem, voip, and router in one). Ive tried various encryption schemes, and even tried to leave it open but to no avail.
I can create a wifi network with both my imac, and with my samsung sgs and the transformer can connect, and also move internet data!
Very weird, I dont even know where to start trouble shooting, can anyone help?
aquenne said:
Hey,
Was wondering if anyone had any solutions to this issue.
I can connect to my router with the asus transformer, successfully get an IP, but can not connect to the external web. I can make internal connections, but again, nothing external. I have no problem with my samsung sgs i9000m, various laptops, ipod touch, etc etc..
The router in question is a speedtouch 780 (dsl modem, voip, and router in one). Ive tried various encryption schemes, and even tried to leave it open but to no avail.
I can create a wifi network with both my imac, and with my samsung sgs and the transformer can connect, and also move internet data!
Very weird, I dont even know where to start trouble shooting, can anyone help?
Click to expand...
Click to collapse
Sounds daft but i assume to have tried rebooting the router .... my router occasionally gets confused based on the sheer number of wifi hardware we have in the house .... otherwise have you tried changing the wifi channel ? read somewhere else that people were having problems with channel 13 ???
hey thanks for the reply.
Yes probably rebooted the router a half dozen times, restored firmware, no go.
Ive bounced around a few channels, doesnt seem to have any effect.
Im really stumped!
aquenne said:
hey thanks for the reply.
Yes probably rebooted the router a half dozen times, restored firmware, no go.
Ive bounced around a few channels, doesnt seem to have any effect.
Im really stumped!
Click to expand...
Click to collapse
so im assuming you cant even get to the market ?
no not via the router, the little wifi icon at the bottomcorner stays gray (means connected, but not to the google servers, it goes blue when it does connect to the google servers.)
It does connect and go blue when i create a wifi network from my cell phoneusing my cell data connection
aquenne said:
no not via the router, the little wifi icon at the bottomcorner stays gray (means connected, but not to the google servers, it goes blue when it does connect to the google servers.)
It does connect and go blue when i create a wifi network from my cell phoneusing my cell data connection
Click to expand...
Click to collapse
well on the plus side that implies its not a TF hardware or setting issue
not sure I can help on the router front as im no expert have you checked what IP address its allocated ? are you able to see the TF from the router info page ?
wilbur-force said:
well on the plus side that implies its not a TF hardware or setting issue
not sure I can help on the router front as im no expert have you checked what IP address its allocated ? are you able to see the TF from the router info page ?
Click to expand...
Click to collapse
yeah im thinking its a router issue.
i can see the transformer, it appears to look exactly the same as all other wifi devices that connect to the router...
stumped =/
Under your wifi settings long press your wireless network under the list of networks available, you should get a "modify network " link pop up, change the setting from DHCP to Static and enter your settings manually. Had a similar issue with an iPod touch once, wouldn't go on the internet unless it had a static address even though all settings were identical to what it pulled from the router using DHCP.
Update Transformer firmware? Leaked official 3.1 is out has updated wifi drivers too.
If no go after that, factory reset the Transformer.
nxt said:
Update Transformer firmware? Leaked official 3.1 is out has updated wifi drivers too.
If no go after that, factory reset the Transformer.
Click to expand...
Click to collapse
I have the same problem with my TF101, I did all of the above, but the WIFI indicator stays grey. I have a good connection with my router.
When I connect with the router at my work, I have the same. So, the problem is TF101 related. When I bought it two weeks ago, it worked. Two days ago I flashed Prime 1.4, and that worked too. Since yesterday I have this problem, and I tried all to solve it. Other firmware, factory reset....everything. Can somebody please help me with this?
Not sure what this issue is, I never had it with the previous WiFi build, only after the 3.1 changes. I have had several occasions where sitting within 5 ft of router, it would not connect. reboot solved it each time, but I have noticed that it appears dependent on when you unlock during the boot sequence. If you let the boot sequence complete before unlocking, it never happens. If you unlock during the boot sequence, it might.
ASUS Tech Support please note.
@rumbleweed : thanks for the response!
Update : I pushed the original 3.0.1 WW blob to /data/local/ with ADB to unroot my TF101. After that the WiFi icon stayed gray, but I had a working internet connection. Later I updated it to WW 3.1. To be sure I did a factory reset, and now it is working again. First the WiFi notification icon stays gray for a few minutes, but after that it went to blue. I have a unrooted 3.1 WW TF101 now, but I'm happy!
aquenne said:
Hey,
Was wondering if anyone had any solutions to this issue.
I can connect to my router with the asus transformer, successfully get an IP, but can not connect to the external web. I can make internal connections, but again, nothing external. I have no problem with my samsung sgs i9000m, various laptops, ipod touch, etc etc..
The router in question is a speedtouch 780 (dsl modem, voip, and router in one). Ive tried various encryption schemes, and even tried to leave it open but to no avail.
I can create a wifi network with both my imac, and with my samsung sgs and the transformer can connect, and also move internet data!
Very weird, I dont even know where to start trouble shooting, can anyone help?
Click to expand...
Click to collapse
Hi i had this same problem when i first unboxed my Asus TF, Wifi said i was connected to my Linksys router, and i even had an IP address but no internet.
In my frustration y plugged it to my PC which is connected with an ethernet cable to the router and voila, internet icon changed from grey to blue and 2 small arrows started to appear. The internet was now working and i updated the thing from 3.0 to 3.2.
Not sure why this happened but ever since that time i have no problems connecting even on different routers and modems.
Hope this helps.
Had this problem myself from unboxing, tried everything suggested and still no joy.
went and got a linksys router to replace my dlink, everything working fine. tried it with a few networks now and seems to be a problem with dlink routers.
I have this same issue at my school. Up until 3 weeks ago it would always give me blue, then randomly it started staying on white. I can use the net, just not connect to the Google servers.
It works fine everywhere else.
Strange.
Try playing with the wifi disconnect policy?
having a different problem here. been using my home internet since unboxing. all was fine. then one day the connection was grayed. tried rebooting and everything didnt work. i went to setting, clicked forget network. then it never appeared again.
and yeah, its a dlink router. any help ?
Problem: fixed!
I had a solid wifi connection most of the time, complete with a solid blue wifi icon. But my wifi was EXTREMELY slow and intermittent. After a great deal of forum searching and trying every possible suggestion, the solution that finally worked for me was to change the channel on my router from 'Auto' to 6. Flawless connection now, and no more dropped signal.
Hi there,
I tried one thing - took off the lock feature from my transformer and now it's back to normal.
If I turn it back on I am back to square one.
Can anyone figure out how the lock feature affects the WIFI connection ? Is there a bug and is there a fix ?
b4dad said:
Had this problem myself from unboxing, tried everything suggested and still no joy.
went and got a linksys router to replace my dlink, everything working fine. tried it with a few networks now and seems to be a problem with dlink routers.
Click to expand...
Click to collapse
Jumping in a bit late, but am having similar issues. Just got my TF but have not been able to connect to my dlink router (dir-655 - onlyl couple months old). The router works fine for everything in the house. I know the settings well and have tried many things (went through all channels one by one, messed with different WPA security options, even removed security, etc). Nothing allows me to even connect to the router/network.
In the Wifi settings is jut keeps saying 'connecting...' and 'scanning...' over and over. I am about to take this thing back as I really can't buy a new router at this point (no new firmware for router is available by the way, I checked).
Has anyone confirmed that dlink routers can work with the TF and if so, what are the settings you are using (channel, WPA security settings, dhcp or static, etc)?? This driving me nuts. I want to keep this TF but won't if I can't get it to work at home.
Oh and by the way, when I use my Droid Inc 2 as a hotspot with WPA security, the TF connects without issue. So the TF appears to be fine, it is definitely related to the dlink router.
Thanks!
Related
Need a little help. My G-tab is running current VEGAn-TAB rom. I am having problems getting the wifi to actually connect. My icon shows a good signal, and inside the wireless settings I am showing connected to my wireless network. I also went to advance settings and made sure wifi never sleeps. All apps that need internet connection (market, browser, etc.) show no data connection.
Used yesterday with no problems. My laptop is running on same network and working fine.
Any ideas?
have you restarted? Sometimes happens to me too but it's nothing a simple restart can't fix.
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
TexasZac said:
Yes. Restarted several times. Didn't work.
Oddly enough I have a Airave from Sprint to boost my cell phone signal, and it may have been the problem. When I unplugged it and returned to my G-Tab later the Wifi was working. Not sure why.
Click to expand...
Click to collapse
Could be competition on the 2.4 GHz frequencies. Some wireless phones and even microwave ovens can trash a wifi connection.
Moved to general
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
LittleBirds said:
Anyone else having WiFi problems with Vegan? Since installing this mod, I can only connect to a WEP signal and not a WPA-secured network.
Click to expand...
Click to collapse
No problems with home WEP, office WPA2-PSK and several wide open public ones. I just wish the damn thing would auto-connect to the ones I have been to before.
outofoffice said:
I can't connect either. Trying to connect to a wep wifi and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
Click to expand...
Click to collapse
My only guess is, if its a 5Ghz N Router you should check to see if it allows
2.4Ghz signals and not just 5Ghz. The GTAB doesn't seem to support connections at 5Ghz.
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
I don't have a lot to add to help you troubleshoot, but I can say that I am running VEGAn Gingerbread RC1 with pershoot's latest kernel. I am able to connect at home on a WAP2-PSK (Linksys Linux based G/N) at home, WAP2-PSK at the cabin (Linksys's cheapest G/N), and at work on a 802.1 EAP network (Cisco).
I has some unexplained issue mounting the internal storage on a computer. After a little head scratching, I started to wonder if it had something to do with the custom kernel I was running. I flashed Pershoot's latest kernel and my problems went away.
I mention all that to suggest that you might try flashing a different kernel and see if you get different results.
I have an issue with vegan where when i reboot the device (or turn off and turn on) wifi is off even if left on when turning off, i have to manually turn on wifi after every boot.
Sent from my DROIDX using XDA Premium App
fajordan said:
I just changed over from TNT Lite(latest version) and was able to connect fine but I didn't like the interface and some of the features. I've loaded Vegan tab 7.0.0 and I was able to connect at work (802.1 EAP) network but I can't connect to a wep wifi at home (were several other pc's are connected and working fine) and it stays on "obtaining ip address from ..." but never completes the connection. Any help?
I have a Linksys wrt300n router and have confirmed that it configured to accept 2.4Ghz & 5Ghz signal and have rebooted several times with no luck.
Click to expand...
Click to collapse
Have you checked to see if you're using MAC address filtering, and if so, that your gTab's MAC address has been added to the whitelist on the router? I get the feeling that that may be the issue. You have the WEP key on your device, but your router's still blocking it. I'm running the same ROM you are, and have had absolutely no troubles connecting to my work network with 802.1 PEAP, WPA/WPA2-TKIP and AES at home, and multiple makes/models of access points/routers.
Hmmm. Just reread your original. Now I'm wondering if you have enough DHCP leases available on your router. If you're out, you'll have to wait until a lease expires or add some more to your scope of addresses.
Hope some of that helped in some way...
I just upgraded my router to a wireless one. Firstly, it's connected via ethernet to a PC and it is happily getting internet access.
On my i5500 I get a strong wifi signal. Wifi Analyser shows the signal at max constantly. I can also connect with Gmote and it works just fine.
The problem is that I can't actually access the net at all from the phone.
So basically I know that my phone is talking to the router with no problem. It's just getting out onto the internet.
Does anyone know of a solution?
try logging into your router and change the broadcast channel to something else and test it again. it should be something like a/b/g mode... define a single channel and see if it works.
I had originally thought that was working. It did for the first few minute where I had connection but then it just dropped.
I have noticed that I have some very small bursts where I can connect.
Do you think that trying the different channels may be the solution?
I have the same problem. Have you found a solution?
Still no solution. I went through every channel and every encryption method.
So far I've found that having the channel set on 'Auto' and then disabling encryption seems to give me internet connection through WIFI for at least the initial period but it eventually drops. But that's also not always.
I've also Googled it to death and found nothing. If you do find the solution please post it here and I'll do the same.
Maybe we can help each other.
make sure you entered the right password of wlan.
use a pc to connect the router and in the wlan you'll find the password.
Ok, just to clarify. My phone connects to the Router via WLAN. In fact I can use Gmote to control my PC. So the WLAN connection is great.
The problem is accessing the internet when using that connection.
I had similar problems with a router last year. I resolved the issues by flashing DD-WRT firmware. The manufacturer's firmware was junk.
Sent from my ADR6300 using XDA App
I had that idea but they don't have firmware for my router yet. I have asked them if they intend to make one.
Any chance the firewall on your phone is blocking your browser from using the Wifi?
Sent from my DInc via XDA App
I have no firewall on my phone.
Ok I've tried some new stuff and they I've had the longest connectivity so far (which is about half an hour).
First I made sure my Wifi wasn't set to turn off when the screen goes to sleep. Second, according to a forum I read, Netgear recommends channel 7. If that channels doesn't work try 1,3,6,9,11,13.
I then disabled encryption.
Fortunately no one near me uses Wifi at all and I've got the kind of walls that stop the signal from getting outside.
Anyway. It's working so far but I'll monitor and report.
[edit] And I forgot. The router was checking for firmware but it wasn't actually finding so I downloaded it myself. Seems that also made a difference.
Ok. I can confirm after 2 and a half hours my internet connection is stable. I even left half way through and when I came back it connected perfectly.
So as a summary here's what I did:
1) Get latest firmware
2) Change channel to 7
3) Disable encryption
I will change encryption and see if it still works
Wifi will not connect to multiple routers. It was working, then stopped yesterday. On the wireless network screen, it shows my network SSID and when i click on connect, wifi shows "connecting" and will sit there for hours doing nothing.
Removed all security from router and it still will not connect.
Rooted and flashed multiple 3.1 and 3.2 roms, will not connect.
Reset router multiple times.
Unrooted and went back to stock and still have same problem.
Tried setting static IP and DHCP, but neither work.
Tried airplane mode on, wifi off, airplane off, wifi on and that didn't work.
What makes this problem ever more weird is when I go to see the wifi MAC address, it shows an address of F5:3F:FE:03:00:00 I'm no computer genius, but I'm pretty certain that isn't even a correct MAC address and I definitely know it's not one registered to ASUS.
Anybody have any thoughts or ideas?
Just to add some more information:
If I setup the TF as a hotspot, I'm able to connect to it from both my phone and laptop. But still not able to connect to anything from the TF itself.
No help as far as why you cannot connect, but that looks like an OK MAC to me.
w8wca said:
No help as far as why you cannot connect, but that looks like an OK MAC to me.
Click to expand...
Click to collapse
That's odd, because if I try to add that MAC in my router filter list, the router comes back and says it's not a valid address. Oh well.
I know it's not a hardware issue because I can connect my laptop to TF when TF is setup as a hotspot, but not the other way around.
Hello,
I searched but I could not find information on this topic in XDA for TF101. I have a TF101, it was running fine and running ww_8.6.5.19 rooted with CWM. I then followed the directions in this thread http://forum.xda-developers.com/showthread.php?t=1514705 to download the WW version of ICS and flashed that. It was working fine at work. I got home and I could not connect to my wifi at home (which had never been a problem). I can see the wifi, I can click connect, enter the key (WEP). In the top of the settings screen it says Wifi and Connecting... under it, but it does not connect. In the Wi-Fi networks area it shows the network and says under it Remembered, secured with WEP.
I have tried everything I can think of. I have turned it on an off, turned the wifi on and off, reset the wireless router. Then I thought maybe it was an issue with the ICS ROM so I tried a million other ROMS and none seemed to work, I did a data wipe and that did not help. As a last resort I used this tutorial http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/ to unroot and return the TF101 to stock. So, I am now sitting with build ww_epad-8.2.3.13-20110511 and I am having the same issue. I cannot connect to the internet at home. (I also tried using WPA and completely open wifi and had the same results I am having now)
Any help would be great. Thanks!
Additional Information
I can get it to connect to my cell phone when I make that a hot spot. The wireless at home is working as I can access it from this laptop I am using, my android phone, and my ipad.
Thanks,
Hi
I wondered whether you actually changed the kernel at one point and then
to another ROM - this caused me a lot of trouble since it led to a non -functional wifi adapter. Worse, I could not connect to
Wifi anymore to download the right kernel
So maybe now your pad is not able anymore to use the full functionality of it's wifi adapter.
For example it is possible that you your rooter is configured to provide not all protocols :
802.11 n.g or b are possible, maybe one is not provided by your rooter but when you tether with your phone .
Another possibility would be non supported channels or channel width - believe me I had all funny combinations already with different devices.
Maybe you first want to check this - I might as well be completely wrong.....
Edit : just checked your provided link - you actually went back to stock? Did you as well use the recovery image or only the
firmware? For me it was unfortunately necessary to go back to a virgin system and use the recovery image.
Update
Okay, I had tried remotely powering down the router last night and it did not fix it. Today I tried unplugging it for a while and that worked. Now I need to research updating from 8.2.3.13.......
I have a feeling its the setup in your wireless router.
First change your wifi router to no security and test connection.. if connects great.. then try WPA and use a new passcode.
Thank you all. I was able to connect (it was the router and I was too damn lazy to unplug it last night) today. So instead of two minutes of walking, unplugging and waiting I have flashed myself silly.
Loving ICS!!!!
Sent from my Transformer TF101 using xda premium
Hi,
After updating to jellybean my wireless keeps disconnecting when i try to use it (data transfer/internet).
Sometimes it reconnects after about 30 seconds, but other times it wont reconnect until i forgot the network, and connect again.
The router is about 3 feet from me, and is on an otherwise empty channel. Its currently set to use b/g/n.
After some googling, it appears that this should have been fixed in Jellybean, but google did something (When i find the link again, i will ammend this) in ICS that meant b/g/n mode didn't work.
When i get home later today, im going to try changing the mode to see if this solves my problem, however i would like to know, Are other people having this same problem ? or is it just me ?
Resetting the wireless router might help.
There's a couple of threads going about wifi after updating to JB.
Someone had mentioned a router reset fixed poor connectivity.
Sent from the inside out...
Am I seriously the only one who saw an improved WiFi signal after the JB update?
As Thats OK said, try resetting your router. If that doesn't work, set a Static IP on your tablet.