Related
Has anyone had a problem with the Captivate when in both WIFI and 3G coverage the phone will not download or open a webpage? If I shut off one or the other it works but if both are active it hangs up and doesnt download.
Is this by chance on an enterprise wifi access point? Such as one of those expensive cisco APs you find in schools and enterprise class networks? If so, there is currently a driver problem with the captivate connecting to it, but not trasnfering data. Whether the netwrok is encrypted or open doesnt seems to matter. Personally, I find this a bigger problem than the GPS issue. I had to use wifi static to manually set IP, subnet, etc. This is a workaround, not a fix.
jhannaman82 said:
Is this by chance on an enterprise wifi access point? Such as one of those expensive cisco APs you find in schools and enterprise class networks? If so, there is currently a driver problem with the captivate connecting to it, but not trasnfering data. Whether the netwrok is encrypted or open doesnt seems to matter. Personally, I find this a bigger problem than the GPS issue. I had to use wifi static to manually set IP, subnet, etc. This is a workaround, not a fix.
Click to expand...
Click to collapse
Hey, I think I'm running into this issue at my workplace (we definitely use those Cisco APs, I see them all around). I'm connected, I have an IP, but I can't browse anywhere.
Here's the weird thing though: I can connect to the company's wifi in any other building (I guess different APs?) than the one I'm in and wifi works fine. It's just the building my cubicle's in that doesn't work and it's infuriating!
well thats dumb.
I had that happen once since I bought the phone on launch. I restarted my phone and it went away.
I've had this problem as well, usually my phone switches to only wifi pretty quickly though, so I don't notice much. The phone acts like it is using the 3G connection because the arrows are both indicating data coming and going, but nothing actually happens unless only one or the other is on.
i need to check this at more places but at home i have a standard dlink dl-624 router with no security over comcast. i think my issue initially was because of the wifi sleep policy (see below) but now i am just getting really really slow speeds. pages seem to load slower than 3G....(i mean really cinemaxHD is showing last of the mohicans in pan and scan)....also the pages time out very very frequently.....
Anyone having problems check out the advanced setting for wifi. The phone has a WIFI sleep policy. my default setting was to disconnect from wifi after the screen locks. my screen locks after 30 seconds. so basically it always looking for my network. you can change it to never.
I want to reiterate our findings again. There are multiple threads on other forums concerning this as well. When it comes to wifi, the captivate has a major problem. DHCP does not work on enterprise networks. Period. It is a driver issue. The network can be open or using any form of encryption, the results are thr same. I had numerous software, hardware and network analyst tackling this issue all week in my department. It is related in part to most enterprise networks not using a default subnet mask of 255.255.255.0. There is a workaround, but it is not a fix. You can either set a static from your static pool of ip's in wifi settings, or, if u connect to multiple networks, use wifi static from the market to remember and apply seperate static configs accross multiple networks which is what were having to do currently. This affects all captivates, one which we consider a major problem with deploying this phone to our other users.
Sent from my SAMSUNG-SGH-I897 using XDA App
I had the same problem and this is how a turn around the problem when I'm connected but cannot browse.
-Use Wifi Static
- DNS from google 8.8.8.8,8.8.4.4
- switch to airplane mode
- activate wifi
- test my conection (open the browser and surf)
- switch to phone mode
Hope it help
floppy__ said:
I had the same problem and this is how a turn around the problem when I'm connected but cannot browse.
-Use Wifi Static
- DNS from google 8.8.8.8,8.8.4.4
- switch to airplane mode
- activate wifi
- test my conection (open the browser and surf)
- switch to phone mode
Hope it help
Click to expand...
Click to collapse
Did this, Wifi Static was being used previously to bypass dhcp, and it correctly assigned the IP settings, used the static I assigned from our static pool of addresses. Still no data transfer over Cisco APs at work.
jhannaman82 said:
Did this, Wifi Static was being used previously to bypass dhcp, and it correctly assigned the IP settings, used the static I assigned from our static pool of addresses. Still no data transfer over Cisco APs at work.
Click to expand...
Click to collapse
are you able to access a website thru his IP address? in this case it's a DNS problem, try the Google DNS 8.8.8.8 - 8.8.4.4
floppy__ said:
are you able to access a website thru his IP address? in this case it's a DNS problem, try the Google DNS 8.8.8.8 - 8.8.4.4
Click to expand...
Click to collapse
Its hit or miss really, seems the wifi radio stack locks up and stops responding according to our trace logs. yes i have tried both our internal DNS server's as well as googles. Everywhere else works perfectly. But at work with our Cisco open (no security) APs, it doesnt work most of the time. Through whos ip address??? I have a static set from our static pool to make sure dhcp was not the culprit. Its def the device, and not my netwrok. I have over 100 of these APs deployed here.
Wifi works great everywhere else (at home with WPA2, etc). There is def a problem with enterprise cisco APs.
Netmask issue and cisco AP's
Posted this over in development thread.
http://forum.xda-developers.com/showpost.php?p=7698066&postcount=410
Make sure your netmask is correct.
Thanks jhannaman82
I just wanted to give a big thanks to jhannaman82 for posting his company's findings with these wifi issues. My wifi works 100% at home on my linksys tomato router (of course, with a netmask 255.255.255.0). But on my college campus they use an enterprise router setup with 255.255.0.0 and I have been going NUTS trying to figure out if it is my captivate or the network.
I can sometimes get a few minutes of working connection, but it always seems to crap out within 1 or 2 minutes.
I will attempt to fiddle around with switching the dhcp to static IP, and will post my results. Thanks!
edit: no luck with static IP fiddling so far. from my laptop (connected wirelessly), I gathered that the netmask is actually 255.255.248.0... when I set my captivate's netmask to anything other than 255.255.0.0, it does not connect. It says "connected" when I set the netmask to 255.255.0.0, but as usual no data will transfer (it seems). I'm at a loss. *shrug* Hopefully there's a driver update or something.
Thanks jhannaman82!
I just wrote a script with the GScript app: "ifconfig eth0 netmask 255.255.255.0", and have a shortcut on homescreen. The problem was that the netmask was wrongly set to 255.255.0.0 on my office wifi. Now all I need to do is tap on this shortcut at office, and the connection works!
Has anyone contacted Samsung about this ?
I'm hoping this gets fixed soon... This refuses to stay connected at my school. Huge pain.
I entered in an IP address and 255.255.252.0 for my netmask after seeing what it was on my computer and turn on flight mode and tested the wifi and now it's working. I'm not sure if it's just one of those fluke connections that I get... but we'll see.
Hey world,
I'm having trouble with my Roger's branded Samsung Captivate SGH i-896's wifi. The phone is completely stock. When I connect to my wireless AP at home it doesn't seem to always work on the captivate... I had a htc magic before running all sorts of different roms and never had a problem like this before.
What happens is that I would connect to wifi at home and it would work, but if I leave wifi on the phone for an extended period of time and go back to the phone, wifi stops working.
It would show that i've successfully connected to my AP but no data would pass through my phone.
Disconnecting and reconnecting to the AP doesn't seem to work, the only way to fix it is to restart the phone. I'm not experiencing this problem with any of my laptops, netbooks or cellphones at home.
Security type is WPA2.
Is anyone else experiencing this problem? Anyone have an idea what could be causing this problem?
I have had this problem intermittently, So has my wife on her Captivate. No idea what causes it though. It's a pain because if WiFi is on, but not working, 3G doesn't kick in so apps just don't work.
my wife's captivate has this issue as well (but I don't on my captivate). It will work for a short period and then stop. We have a fios wifi router, not sure if that matters at all.
restarting the router and/or phone usually fixes the problem
mine is a linksys... hrnnn
I'm having the same problem on my new Captivate. Tried it on several different networks with the same results (shows connected but no data will transmit) before I took it back to ATT. They scratched their collective heads and rebooted (powered down and removed battery), which is a temporary fix, but its been working for two days now and I turn off WiFi unless I know I'm in range of a working hot spot.
I was having this same problem until I set my wifi policy to never sleep, dont know if it is a fix for everyone but it definitely fixed my problem.
Sent from my SAMSUNG-SGH-I897 using XDA App
Glad to hear I'm not alone!
I've been fighting with this issue for over a week now, it suddenly started occurring. I wonder if it was an app we all loaded that suddenly made this condition occur? If you look the phone is requesting an IP and if the IP given back by the router is the same one it already has the phone doesn't acknowledge that command. If the router is rebooted then a new IP is given, or what is considers new. This is a HUGE problem and I've put in some time looking at it, but one of the problems is that is comes and goes. What your router log and you'll the phone request an IP over and over again, all the while the router saying "here, take the same one you already have back".
If you use the app "Network Info II" you'll see the problem when it displays a "Device IP" at the top of 192.168.1.254 and WiFi IP address will be the correct one, in my case 192.168.1.108. When we have these two IP numbers showing differently the device is hosed. Rebooting will put them back in sync, but that is not the proper solution, we need to get to the bottom of this! I understand the WiFi IP address showing at the bottom but the "Device IP" I do not, why the difference? How can we affect the "Device IP", where does the device get that IP address?
Try the app called WiFi Fixer. That did the trick for me. There seems to be a bug of some sort that causes the phone to not release the IP address. Or you could use static IP but that worked only for a while.
Cheers.
Sent from my SAMSUNG-SGH-I897 using XDA App
the app doesn't seem to work for me.... =(
DKirk said:
How can we affect the "Device IP", where does the device get that IP address?
Click to expand...
Click to collapse
The phone gets the device IP from either the service provider (when using edge/3g), or from the router (when using wifi). If an IP address is not provided, it uses a default IP address, which is always outside of the standard private IP block.
There are two ways to assign an IP address: dynamically and via static IP address. Dynamic = assigned by the router, static = pre-programmed by you. I don't know if you can set a static IP address on a phone, as I've never tried it.
I had a zyxel wireless n router in my house and could never get the wifi to work on my captivate. If it did work it lasted 5 seconds... I was really pissed.
I was thrilled to see that buffalo is now back in the market and with dd-wrt firmwares... So I picked up the most expensive one they had for $89.99.
it has a dlna client built in as well as bit torrent, also lets you use a spare usb hard drive as a nas... things i don't know....
However loaded up the wireless settings in 2 minutes and voila... perfectly working on my captivate... I have also found that this router works flawlessly with G+N devices and it is gigabit. I was able to stream 1080p video from my synology 411+ to my ps3, download on the captivate and be on two other laptops at the same time without any issues... I am very very impressed with the buffalo.
Here is the product info.
buffalo nfiniti wireless n high power router and access point. WZR-HP-G300NH
ohh and my laptops are connected fully at 300 mbps with this router wirelessly...
very very happy with it.... Oh and forgot to mention... once this started working with the buffalo i noticed my batter was much better running on wifi all the time. Also wifi file explorer pro works flawlessly.. I was able to upload a 700 meg movie to my captivate wirelessly in about 2 minutes.
WiFi fixer did not fix my problem as well. After turning WiFi on the device IP remains 192.168.1.254 while the WiFi IP is correctly set at 192.168.1.108. When these two IPs are different WiFi does not work and WiFi Fixer doesn't appear to see any problems here.
The router here is an Asus RT-N16 running Tomato and I'm fairly confident that isn't the problem. This is more like an internal routing issue inside the phone.
I don't think it's brand of router that matters... maybe a setting on our routers can fix this...?
I've searched the internet to find a sol'n but it looks like this wifi problem is a widespread problem for almost all galaxy S devices... ppl have made temporary workarounds (ie. setting a static ip) but ultimately, there is no fix for this problem.... gg...
bigbrotherbear said:
I've searched the internet to find a sol'n but it looks like this wifi problem is a widespread problem for almost all galaxy S devices
Click to expand...
Click to collapse
It appears to go beyond Samsung Galaxy, I've seen the same issue with Nexus and Motorola Droids. VERY frustrating!
tylerdurdin said:
I was having this same problem until I set my wifi policy to never sleep, dont know if it is a fix for everyone but it definitely fixed my problem.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I dont know why nobody even notice that answer !!!!
had same problem on my milestone .. it is not a bug , wifi goes to sleep , its the way your phone is set up ... as its quoted here set it to never sleep and make sure your not using soem kind of app that will overwrite that setting ( like battery manager that for example could turn off wifi to save battery)
very easy to double check once your wifi is not working , go in wifi settings scan and check the wifi access points you normally use you ll see its set to disabled ..
the bug is it doesnt resume like it should. or gets re-enabled however you wanna call it . just re-enable it voila ! no reboot needed .
I got it working!!
This may be my first post here, so be kind...
Running Cognition v2.3b3 and Linksys WRT54G router. WIFI was working fine until I flashed to Cog 2.2 Then I could only use WIFI tethering, no other WIFI connection would work.
I tried setting up static IP and setting sleep to never. Didn't work. Changed router security from WEP to WPA Personal and got it working.
Phone settings: Go to Wi-Fi Settings, click menu, and goto advanced. I don't know if all the settings here are necessary, but I'll post what I have.
Port = 80
Use statis IP = checked
IP address = 192.168.1.103 (check your router assignments for an open address)
Gateway = 192.168.1.1
Netmask = 255.255.255.0
DNS 1 = (check your router config. For my router it's located under the Status, then router tabs.)
Router settings: (Under the Wireless, Wireless Security tab)
Security Mode = WPA Personal
WPA Algorithms = TKIP
WPA Shared Key = (your access key used when you attempt to athenticate from your phone)
Group Key Renewal = 3600 seconds
Write the access key down so you can use it to reconfigure the other wireless devices on your home network.
Good luck,
Glen
changing my router fixed the issue.
I have wifi running on my captivate for 8 hours at a time at work now and at home. Not one hiccup or disconnect, works 100%.
99% of wireless routers are crap. I work in IT and have dealt with most major brands and had been running linksys wireless routers with dd-wrt on them...
if you got a spare 90 bucks.. go to your microcenter or place where they sell buffalo routers and pick one up. If it doesn't work.. you can return it.
This worked for me
Going to a static IP worked for a few hours and then it stopped working as before. WiFi is set to not sleep.
When I ran the router without security I did not have this problem and since adding WPA2 w/AES+TKIP the problem has developed. The iPod Touch doesn't have a problem with it, nor my laptop or wireless ipTV set-top box, only the Android. I'm leaning towards setting up another router without security, on a different channel, and see if the problem disappears again. Here in 2010 we shouldn't be having this issue, but look on other forums and you'll find similar complaints with other brands of Android phones, it's not a Samsung thing.
While everywhere I go I can get a wifi internet connection, when I try at home I connect to wifi but I cannot get any data connection! My router is fine because all my friends use it to connect on the net with their phones.
Any ideas anybody?
A possibility
There are some cases where the router is not compatible wit Android devices and allows them to connect properly onto the wifi network, but not getting the proper IP, subnet and so on. Have you tried to manually enter these details into the phone and try out if there will be any Internet access afterwards or not.
In some other cases, maybe the DHCP pool is empty so it can not provide you with an IP, where manually entering the IP details should again help. But I think this is very rare case. About the first case though, I met some issues with the routers and the Android devices.
Hope this will solve the prob..
Have a lovely day!
Did you try rebooting your router? This happend to me sometimes too, my laptop can connect just fine but not my phone & a router reset always fixes it.
I have tried to manually enter the IP address, subnet and so on into the phone but still I cannot get an internet connection! I have also rebooted my linksys rooter but still nothing!
Log into your router and change the output channel. Sometimes if the router is putting out on a high channel say 13 for example this can cause some devices to not be able to communicate with it. So try changing it to a low number say 3. This should solve the problem.
kabuk1 said:
Did you try rebooting your router? This happend to me sometimes too, my laptop can connect just fine but not my phone & a router reset always fixes it.
Click to expand...
Click to collapse
This is more than likely because your router is set up to automatically switch to the channel that is the least congested, again if this is a high channel this can cause problems for some devices. What you are doing when you turn it off and on again is resetting the channel. I recommend you also manually select the channel by logging into you router and changing the settings.
I changed manually the router number several times but still no connection!
This issue is due to WIFI encryption. Try WEP or WPA encryption. I was facing the same issue. When i changed the encryption to WPA I am able to access the net.
uttamhoode said:
This issue is due to WIFI encryption. Try WEP or WPA encryption. I was facing the same issue. When i changed the encryption to WPA I am able to access the net.
Click to expand...
Click to collapse
Yes, it might be encryption, might be the channel selection as well as previously stated.
The thing with the channels is not only if they are on higher or lower, but they are just a little hops on the frequency side so for example if some other device is working on the same or close to yours channel, it might interfere and give you disconnections from the wifi, slower speed, no connection at all etc. etc.. So in some case the channel selection (changing the wifi channel) may do the trick. Unfortunately in your case as I can understand this is not true.
About the encryption, there is also one more thing as a security and that is not allowing the devices automatically, but with it's MAC addresses.
I would recommend just for testing purposes to try and disable all the security and check out the connection that way.
What sort of IP details did you entered on the phone? I mean - I was thinking of entering an IP different from the pool, subnet usually 255.255.255.0 (depends) and the Default Gateway to be the router's IP. Then for the DNS if you can try with the OpenDNS and one from Google.
And if you would like to share some info if there are any other devices connecting with the wifi at the premises and how they are working.
Hopefully you will resolve the issue, soon!
Have a lovely day!
bump
having same issues ever since I flashed latest insertcoin ROM
I tried the 2.3.5 ROM and was having issues connecting to wifi, so I went to the 2.3.4 SSE, but wifi issues did not clear up. It hangs on obtaining IP.
This happens for all settings, static and dynamic, router reset did not help, modifying channels did nothing, neither did changing encryption settings. The wifi connection works for every other device in our home, including a stock Sensation.
Thanks in advance for any help. Since I'm a noob on forums I can't post to the dev section about this.
syuusuke said:
bump
having same issues ever since I flashed latest insertcoin ROM
I tried the 2.3.5 ROM and was having issues connecting to wifi, so I went to the 2.3.4 SSE, but wifi issues did not clear up. It hangs on obtaining IP.
This happens for all settings, static and dynamic, router reset did not help, modifying channels did nothing, neither did changing encryption settings. The wifi connection works for every other device in our home, including a stock Sensation.
Thanks in advance for any help. Since I'm a noob on forums I can't post to the dev section about this.
Click to expand...
Click to collapse
Hi, since the stock sensation is working properly, why don't you flash the relevant stock rom and see if that works, seems like all else failed
Hello all!
Not sure if this has been posted but I figured I would put up a new post. I am showing that I am connected to my home WiFi but I am not able to actually use it. For instance, I cannot open links or watch YouTube videos. I believe it is the router because I just had a Droid RAZR and my connections to the Internet were not dependable. Currently, I am using AT&T's 2Wire 2701HG-B Gateway router.
Are there any settings that should be adjusted within the router? Encryption type is WPA-PSK. Wireless mode is 802.11g/b.
I just got my S3 yesterday and so far WiFi works in other places. Also, I tried the #*0011# thing and that did not work for me. I've rebooted and factory reset my device. Nothing helps. Anything I can change?
Thanks in advance!
Does your router Administration panel (perhaps accessed via a web browser?) show your phone as connected with an assigned IP address?
- ooofest
ooofest said:
Does your router Administration panel (perhaps accessed via a web browser?) show your phone as connected with an assigned IP address?
- ooofest
Click to expand...
Click to collapse
Now that I'm looking, no it doesn't have it listed there. My phone says its connoted though. I forgot the connection, rebooted the phone and did the #*0011# and reconnected the network. Still the same result. Any ideas?
I've seen some routers being a bit buggy about showing all wireless-connected devices (my dual-band Netgear comes to mind), so I can only think of a few things to check:
This assumes your router is configured for DHCP and that you have addresses available in its configured range, etc.
1. Does anything else use this router successfully to access the Internet?
2. On your phone, Settings -> Wi-Fi->(click on the wireless network you are "Connected" to)->View, does it show an expected speed and a valid IP address from your router?
3. If (2.) revealed a valid IP address on the phone, can you ping that address from another system attached to the same router?
4. Did you connect the phone using a typed-in passphrase on both router and phone or by using the Wi-Fi Protected Setup (WPS) push-button method on the router? I found that, no matter how carefully I typed the passphrase, it often would not connect to my desired network because something was somehow amiss. However, this phone is compatible with using WPS, so I used the router's push-button method and it connected easily + worked fine.
Just some things to check and ensure nothing critical is amiss.
- ooofest
ooofest said:
I've seen some routers being a bit buggy about showing all wireless-connected devices (my dual-band Netgear comes to mind), so I can only think of a few things to check:
This assumes your router is configured for DHCP and that you have addresses available in its configured range, etc.
1. Does anything else use this router successfully to access the Internet?
2. On your phone, Settings -> Wi-Fi->(click on the wireless network you are "Connected" to)->View, does it show an expected speed and a valid IP address from your router?
3. If (2.) revealed a valid IP address on the phone, can you ping that address from another system attached to the same router?
4. Did you connect the phone using a typed-in passphrase on both router and phone or by using the Wi-Fi Protected Setup (WPS) push-button method on the router? I found that, no matter how carefully I typed the passphrase, it often would not connect to my desired network because something was somehow amiss. However, this phone is compatible with using WPS, so I used the router's push-button method and it connected easily + worked fine.
Just some things to check and ensure nothing critical is amiss.
- ooofest
Click to expand...
Click to collapse
1. Yes, my iPad and two laptops.
2. There is a link speed and an IP address but the third number of the IP address on my phone is different than the third number of the IP addresses of the devices listed that connect to the router. I hope I made some type of sense saying that lol! There are about 6 devices listed that connect to the router and the first, second and third numbers are the same. My phone only have the first & second numbers in common.
3. didn't try that because I'm assuming something isn't right from the previous answer.
4. I typed in the pass phrase from my phone. I do not know of any other way to connect the device. I am not familiar with doing it from the admin panel especially since I'm not even seeing the device there.
Thanks again!
Yeah, not getting the proper address range would be indicative of a problem authenticating with the router, I'd suspect. If you are using the default router configuration, it should have an IP address of 192.168.1.x, where x = {some number}
You might try temporarily setting the router to "WEP-Open" and no passphrase on the phone (i.e., connect to the open network) to determine if the phone can obtain a valid IP address from this router before doing more debugging. This might weed out the possibility that this new phone has an inherent problem connecting with your specific router - even though other devices don't have such issues, maybe the Galaxy S III is sensitive in this regard.
Consider ensuring that the "Power setting" in your wireless configuration is at its maximum value (10?).
Aside, I don't know if the latest firmware enables WPA2-PSK, but that utilizes AES and is often more efficient than WPA-PSK, from my understanding. If using WEP-Open works for your new phone in the above test, then consider setting the router to "WPA-PSK and WPA2-PSK" (if it has that value) and try reconnecting using the passphrase (either 10 or 26 letters/numbers) - that setting should be compatible with your other devices and not require them to be reconfigured, I believe.
This topic seems to indicate people have problems with your model of router in making and keeping wireless connections at times, sometimes needing to hardcode the router down to only use "b" protocol (i.e., slower) for maintaining stable connections. I don't think that's the case here, though.
This User Guide (.pdf) for your router model does not seem to show that it offers WPS as an alternative for establishing device connectivity. From my recollection, my phone would only connect reliably to the router using encryption when I used the WPS button on the router. That's why I asked you to set your router to be Open for a test.
- ooofest
I had the same issue as you. I would be connected to my router and nothing at all. I am using a att modem/router along with my netgear wndr3800. But wifi was dropping a lot of the time. I never had this problem before when I had my Rezound. 3 days before I got my S3 I upgraded the firmware on my netgear router. I am guessing my S3 didn't like the firmware update or something. I tried everything in the router settings to doing a factory reset on both the att modem and my netgear router. Nothing... So I honestly thought it was my phone. Called Verizon and asked them to ship me a refurbished. So, I thought I would try one more thing. Revert back to my old firmware on the netgear router. Well it worked. Since Friday night I haven't had the issue you are having. Connected to my home wifi with no drops at all. It could be the firmware. Wonder if you could revert back. On a att modem/router I am not sure.
Sent from my Samsung Galaxy S3
ooofest said:
Yeah, not getting the proper address range would be indicative of a problem authenticating with the router, I'd suspect. If you are using the default router configuration, it should have an IP address of 192.168.1.x, where x = {some number}
You might try temporarily setting the router to "WEP-Open" and no passphrase on the phone (i.e., connect to the open network) to determine if the phone can obtain a valid IP address from this router before doing more debugging. This might weed out the possibility that this new phone has an inherent problem connecting with your specific router - even though other devices don't have such issues, maybe the Galaxy S III is sensitive in this regard.
Consider ensuring that the "Power setting" in your wireless configuration is at its maximum value (10?).
Aside, I don't know if the latest firmware enables WPA2-PSK, but that utilizes AES and is often more efficient than WPA-PSK, from my understanding. If using WEP-Open works for your new phone in the above test, then consider setting the router to "WPA-PSK and WPA2-PSK" (if it has that value) and try reconnecting using the passphrase (either 10 or 26 letters/numbers) - that setting should be compatible with your other devices and not require them to be reconfigured, I believe.
This topic seems to indicate people have problems with your model of router in making and keeping wireless connections at times, sometimes needing to hardcode the router down to only use "b" protocol (i.e., slower) for maintaining stable connections. I don't think that's the case here, though.
This User Guide (.pdf) for your router model does not seem to show that it offers WPS as an alternative for establishing device connectivity. From my recollection, my phone would only connect reliably to the router using encryption when I used the WPS button on the router. That's why I asked you to set your router to be Open for a test.
- ooofest
Click to expand...
Click to collapse
I tried WEEP-Open and that did not allow me to connect either. I did set up WPA2 but I still was not able to connect. The power setting was set to 10. Not sure how to manually add the device which I was going to try. I've forgot it several times and added it again but it does not work. I did connect at a different location. Not sure what else to try. Even tried changing the channel.
iLogikk said:
I tried WEEP-Open and that did not allow me to connect either. I did set up WPA2 but I still was not able to connect. The power setting was set to 10. Not sure how to manually add the device which I was going to try. I've forgot it several times and added it again but it does not work. I did connect at a different location. Not sure what else to try. Even tried changing the channel.
Click to expand...
Click to collapse
If it's not connecting to your router with WEP-Open, then something different is going on. I looked in the manual for MAC Address access lists, but that doesn't appear to be a feature of this router (unless it was added in a firmware update which came after the manual was published - if this was the case, your laptops and iDevice would have had their MAC addresses added to the router as another layer of access control to the WiFi network).
Sorry, I'm out of ideas on this one. You seemed to say that the Samsung connects to other WiFi points, so perhaps there is an inherent incompatibility between this router model and your phone which can be reported to Samsung and/or Verizon Tech Support - for all we know, this is a known issue.
- ooofest
ooofest said:
If it's not connecting to your router with WEP-Open, then something different is going on. I looked in the manual for MAC Address access lists, but that doesn't appear to be a feature of this router (unless it was added in a firmware update which came after the manual was published - if this was the case, your laptops and iDevice would have had their MAC addresses added to the router as another layer of access control to the WiFi network).
Sorry, I'm out of ideas on this one. You seemed to say that the Samsung connects to other WiFi points, so perhaps there is an inherent incompatibility between this router model and your phone which can be reported to Samsung and/or Verizon Tech Support - for all we know, this is a known issue.
- ooofest
Click to expand...
Click to collapse
Thank you for all of your help!
Rams99 said:
I had the same issue as you. I would be connected to my router and nothing at all. I am using a att modem/router along with my netgear wndr3800. But wifi was dropping a lot of the time. I never had this problem before when I had my Rezound. 3 days before I got my S3 I upgraded the firmware on my netgear router. I am guessing my S3 didn't like the firmware update or something. I tried everything in the router settings to doing a factory reset on both the att modem and my netgear router. Nothing... So I honestly thought it was my phone. Called Verizon and asked them to ship me a refurbished. So, I thought I would try one more thing. Revert back to my old firmware on the netgear router. Well it worked. Since Friday night I haven't had the issue you are having. Connected to my home wifi with no drops at all. It could be the firmware. Wonder if you could revert back. On a att modem/router I am not sure.
Sent from my Samsung Galaxy S3
Click to expand...
Click to collapse
I've tried every way possible to find a way to revert back but it does not work. No success. I've noticed that this S3, my old razr, & another android phone does not actually connect. The comet (3rd phone) actually appears on the the panel but the ip address on the phone is different than what is showing on the admin page for my router. The phone does show whereas the razr and s3 never even appear in the list though they say they are connected.
I'm at a dead end
iLogikk said:
I've tried every way possible to find a way to revert back but it does not work. No success. I've noticed that this S3, my old razr, & another android phone does not actually connect. The comet (3rd phone) actually appears on the the panel but the ip address on the phone is different than what is showing on the admin page for my router. The phone does show whereas the razr and s3 never even appear in the list though they say they are connected.
I'm at a dead end
Click to expand...
Click to collapse
To be honest. It's not your phone. I think you said you already did a factory reset on the modem/router correct? If not, do it and revert back to factory settings. If that doesn't work I would call att and tell them to send you another att modem/router. Tell them your wifi is down. Hopefully you'll get everything back to where it was. Good luck.
Sent from my Samsung Galaxy S3
Fix
This is what finally worked after two weeks of researching! Found this here for the toshiba thrive but it worked for mr! http://www.thriveforums.org/forum/t...1-thrive-will-not-connect-t-2wire-router.html
I tried this part but all of my settings were already set to match this....including it because it was part of the process.
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Originally Posted by shakefry
My little sister received a cool Toshiba Thrive for Christmas but the thing will not connect to the proprietary router we have. The router isn't the problem because I've been able to connect a Macbook, 2 PCs, a 3DS and a smartphone to it and they all work as needed. When we put in the password for the connection it saying it is 'scanning' and 'connecting' then disconnects and starts going into a scanning loop saying is scanning then stopping then starting again.
I found a similar topic about this but the thread did not answer my question. I followed all of the steps of given solutions to no avail. And the constant suggestion to set the beacon or preamble differently is highly frustrating because the model router I have does not have such settings (I have gone through all the menus about ten times, literally).
I have also heard that the connection security could be a factor but I am not willing to downgrade my WPA 2 (TKIP & AES) to a WPA 1 or WEP, unless its absolutely necessary. I've been googling for hours so I need a solution or unfortunately we will have to return it for a more compatible device, which would suck because we got this for a good price (new).
Our router is a 2WIRE 3800 hgv-b (we have AT&T Uverse, idk if I should specify anything else)
Any help would be greatly appreciated.
Hi shakefry - Nice to meet you. You are 100 percent right you should not lower your security - WPA2 is the strongest and it does work fine with Thrive. That is what I use.
For some reason the ATT 2-wire routers are the most frustrating, but that is not a problem. We just might have to try a few different things, instead of getting it to connect the first time, so stay with me, OK? big brothers always have to help their little sisters...
----
1. You do not have MAC Filtering enabled,do you? If you do add the Thrive's MAC to the Router's list of permitted devices. Then try connecting.....
2. Not using MAC Filtering, or you added the thrive and still can not connect ......
OK, First ... Lets get the info your Windows Laptop has about your router when it connects
successfully to the 3800HG-B Router via wifi:
On your (Win7?) PC that is successfully connected by wifi to the same network, lets get some wifi settings. Vista - pretty much the same screens, XP a little different looking.
Click on the wifi signal lower right taskbar, open network and sharing center.
click on right side in blue, your network name
Pop up window - click on Details
the detail window opens ...
IPv4 Subnet Mask should be 255.255.255.0, if not we need to change it in the router settings.
This would prevent you from getting to the internet, but with all devices not just thrive.
Copy down IPv4 Default Gateway, and both IPv4 Servers
(Most routers will not need the actual IPv4 addresses in the devices DNS1 and DNS2, but yours might)
Now (no picture) close the DETAILS window and click on WIRELESS PROPERTIES. click on SECURITY tab, then click on SHOW PASSWORD. DO NOT CHANGE THIS FIELD, YOUR PC WILL DISCONNECT. WHAT YOU SEE IN THIS FIELD IS THE CORRECT PASSWORD TO YOUR NETWORK.
(I just want to be 100 percent sure - this is the password you need to log the thrive on. You are pretty sharp with all this stuff, so you know it is case sensitive, don't mistake a "zero" for the cap letter O, etc.
We will try using these when we set Thrive's wifi settings for your network.
(Go to link to find the screenshot)
Now please check the following router summary page by logging on to your router.
Make sure, on the right side it, shows enough DHCP Available, and on that the router
address is still 192.168.1.254
And on the left, the page is exactly the same as below, none of the blank fields are filled in, right?
And the top button is still selected ..... 192.168.1.0/255.255.255.0 (default)
--------------------------------------------------------------------------------------------------------------------------------------------------------------
THIS IS WHERE THE ACTUAL FIX CAME IN
Originally Posted by shakefry
"Would it possibly help if i DID enable filtering? then I could just put in all the device's MAC addresses and maybe it'll be more focused or something?"
No filtering wont "pull in" the devices, through the front door of the router. Filtering will just turn them around and kick them out again if they are not on the "invited to the party" List.
"edit: I just found a similar page, the design is slightly different. The router/gateway address is one number above my DHCP range and it says I have 178 available and there are 12 allocated (weird because we only have 10 devices connected to this thing that I know of)
OK so you have plenty of available IP addresses (DHCP). It is normal to see a couple more than the number of devices you have."
So now you have the info you need to connect the thrive (maybe):
1-Hold the Thrive in portrait mode so the keyboard does not hide the settings
...
2- Go to Settings >> Wireless and Networks >> Wi-Fi settings >> tap your network name, Tap FORGET
Now when your network name shows up again under wifi settings ....
select WPA2
Enter password, it is case sensitive.
3- tap the triangle where it says DHCP, select "static"
enter 192.168.1.173. (a nice odd numbered unused ip, away from the auto assigned ones).
(You are making it an odd number (173) because if you buy, in the future, something like a network drive, or AppleTV, it will probably come with a nice "multiple of five" static number like 150 or 155 or 35
the "CONNECT" is greyed out .... right?
4- enter routers gateway 192.168.1.254
enter prefix 24
enter dns1 192.168.1.254
5- the"CONNECT" brightened up again? Tap CONNECT.
....... OR ..........
CONNECT is still greyed out? Enter DNS2 192.168.1.254, tap CONNECT
ARE YOU CONNECTED???
If NO
1- update the router's firmware - try connecting again
2- We will give up on the 3800 and add your second router, with different sets of DHCP ranges, and broadcasting on a non-conflicting channels to the 3800's channel ( channels 1, 6, and 11 do not conflict with each other - assign one router to channel one and the other to channel 11, and keep them a couple of feet away from each other.
shakefry, Please Let us know how it goes, which solution worked ... so other forum readers can help their little sisters too ....
we are standing by (actually in my comfy recliner waiting ..)
Thanks, bobj
aka Bojo, or Obi-Wan, or RouterRooter
I was able to connect to wifi consistently and access the Internet and YouTube app successfully. Hope this helps someone else!!!
Source: http://www.thriveforums.org/forum/t...1-thrive-will-not-connect-t-2wire-router.html
Glad to hear you got it going. I actually fixed mine about 3 days ago. I read somewhere changing your ssid inside the router helps. Well, I did and it actually worked. I haven't had a problem with my wifi signal yet. On mine what was happening also was whenever my phone would go into sleep for say 5min and I went to use the Internet immediately. It would take the wifi about 20-30secs for the wifi to wake up. So far, since changing my ssid I haven't had that problem at all.
Sent from my Samsung Galaxy S3
iLogikk said:
This is what finally worked after two weeks of researching! Found this here for the toshiba thrive but it worked for mr!
. . .
2- Go to Settings >> Wireless and Networks >> Wi-Fi settings >> tap your network name, Tap FORGET
Now when your network name shows up again under wifi settings ....
select WPA2
Enter password, it is case sensitive.
3- tap the triangle where it says DHCP, select "static"
. . .
4- enter routers gateway 192.168.1.254
enter prefix 24
enter dns1 192.168.1.254
5- the"CONNECT" brightened up again? Tap CONNECT.
....... OR ..........
CONNECT is still greyed out? Enter DNS2 192.168.1.254, tap CONNECT
. . .
Source: http://www.thriveforums.org/forum/t...1-thrive-will-not-connect-t-2wire-router.html
Click to expand...
Click to collapse
Thanks for posting a followup.
Did you delete and re-add the WiFi network on your phone, configuring it for a static route and IP address that was in the range on the router, essentially?
- ooofest
At first a reboot of the phone worked, but later I found that if I rebooted the router the codes would come through but not the previous sent codes, only newly made 2FA code requests. I have a Netgear 6300R2 Router with a second router, Netgear R6300V1, as an extended wifi only router wired together with Ethernet. I have multiple phones that have no problems with 2FA codes, only the new phone Ulefone Note 11P, which is the only phone running Android 11. This phone also has the problem of the new standard for Mac Address assignment as automatic. Since I made the home network use Mac address as the requirement for access to WIFI and assigns a static IP address to each device and has 20 addresses in the router setup. The only way I could get this phone to work on this network was to have one IP slot in the 20 not defined in the DHCP IP address list. So, for the life of me I can not find or do not know how to ask the internet for any info on this type of problem since many phones are running Android 10. Most people probably have newer equipment than I do so the problem is not showing up yet, but I imagine it will when all the Internet security is using Mac addresses to secure the network from unknown devices, an issue that has come up many times. So, if you could point me to some better router software I could load on the routers to handle the Mac addressing problems and have the right protocols built in for 2FA (2-factor authentication) I would try that. It must be a combined problem with Android 11 Wifi settings and router setting for it to work this way. After rebooting the router and receive code all day, the next morning the codes fail to show again, and I reboot the router again. Also, I am in the habit of using Airplane Mode or turning off data and WIFI overnight to prevent access from all those data hungry PUPs connected to the phone over the internet. Thank You for your help. The routers are updated with the latest Netgear software.
bmaz121 said:
At first a reboot of the phone worked, but later I found that if I rebooted the router the codes would come through but not the previous sent codes, only newly made 2FA code requests. I have a Netgear 6300R2 Router with a second router, Netgear R6300V1, as an extended wifi only router wired together with Ethernet. I have multiple phones that have no problems with 2FA codes, only the new phone Ulefone Note 11P, which is the only phone running Android 11. This phone also has the problem of the new standard for Mac Address assignment as automatic. Since I made the home network use Mac address as the requirement for access to WIFI and assigns a static IP address to each device and has 20 addresses in the router setup. The only way I could get this phone to work on this network was to have one IP slot in the 20 not defined in the DHCP IP address list. So, for the life of me I can not find or do not know how to ask the internet for any info on this type of problem since many phones are running Android 10. Most people probably have newer equipment than I do so the problem is not showing up yet, but I imagine it will when all the Internet security is using Mac addresses to secure the network from unknown devices, an issue that has come up many times. So, if you could point me to some better router software I could load on the routers to handle the Mac addressing problems and have the right protocols built in for 2FA (2-factor authentication) I would try that. It must be a combined problem with Android 11 Wifi settings and router setting for it to work this way. After rebooting the router and receive code all day, the next morning the codes fail to show again, and I reboot the router again. Also, I am in the habit of using Airplane Mode or turning off data and WIFI overnight to prevent access from all those data hungry PUPs connected to the phone over the internet. Thank You for your help. The routers are updated with the latest Netgear software.
Click to expand...
Click to collapse
For the DHCP/IP problem I know very little to help your issue. Other alternatives you can try is alternative Software for your router instead of the one from Netgear. I have found just from a quick search Openwrt and DD-wrt, both of which are linux based and have their own limitations.
As for the Openwrt build/s, WIFI only works in 802.11g, but 802.1an/ac work only with limited functionality or not at all. That may not seem so important considering you would only use it for the WAN/LAN ports.
As for DD-wrt, your best bet is to skim through their forum posts to figure out what works and what doesn't. (DD-wrt contains non-FOSS drivers from Broadcom, which they don't release to public, so better compatibility in general)
You can always use another wifi extender in your combo (or stick with it, if that's not the issue).
Best of luck in solving your problems.
Slim K said:
For the DHCP/IP problem I know very little to help your issue. Other alternatives you can try is alternative Software for your router instead of the one from Netgear. I have found just from a quick search Openwrt and DD-wrt, both of which are linux based and have their own limitations.
As for the Openwrt build/s, WIFI only works in 802.11g, but 802.1an/ac work only with limited functionality or not at all. That may not seem so important considering you would only use it for the WAN/LAN ports.
As for DD-wrt, your best bet is to skim through their forum posts to figure out what works and what doesn't. (DD-wrt contains non-FOSS drivers from Broadcom, which they don't release to public, so better compatibility in general)
You can always use another wifi extender in your combo (or stick with it, if that's not the issue).
Best of luck in solving your problems.
Click to expand...
Click to collapse
Thanks for that, great idea! What I find though, with Extenders, is that they require you to have your base station WIFI on 24/7 where my set-up the base, which is right next to me, is off and the 2nd router is WIFI on. This keeps me from being 2.4 or 5.0 waves passing through my body.
bmaz121 said:
At first a reboot of the phone worked, but later I found that if I rebooted the router the codes would come through but not the previous sent codes, only newly made 2FA code requests. I have a Netgear 6300R2 Router with a second router, Netgear R6300V1, as an extended wifi only router wired together with Ethernet. I have multiple phones that have no problems with 2FA codes, only the new phone Ulefone Note 11P, which is the only phone running Android 11. This phone also has the problem of the new standard for Mac Address assignment as automatic. Since I made the home network use Mac address as the requirement for access to WIFI and assigns a static IP address to each device and has 20 addresses in the router setup. The only way I could get this phone to work on this network was to have one IP slot in the 20 not defined in the DHCP IP address list. So, for the life of me I can not find or do not know how to ask the internet for any info on this type of problem since many phones are running Android 10. Most people probably have newer equipment than I do so the problem is not showing up yet, but I imagine it will when all the Internet security is using Mac addresses to secure the network from unknown devices, an issue that has come up many times. So, if you could point me to some better router software I could load on the routers to handle the Mac addressing problems and have the right protocols built in for 2FA (2-factor authentication) I would try that. It must be a combined problem with Android 11 Wifi settings and router setting for it to work this way. After rebooting the router and receive code all day, the next morning the codes fail to show again, and I reboot the router again. Also, I am in the habit of using Airplane Mode or turning off data and WIFI overnight to prevent access from all those data hungry PUPs connected to the phone over the internet. Thank You for your help. The routers are updated with the latest Netgear software.
Click to expand...
Click to collapse
Update: 9-26-21 3:31PM PST I did some reading on different Qos settings and can see a potential problem, so I unchecked Qos completely. All the 2FA codes are coming through now. I have to wait another day before being sure, but I think that may have been the problem. It also had a problem logging on to WIFI which had that too. So, my question now is, What does Qos have to do with 2FA codes coming through. The codes are no normal MMS messages so is it the software in the router being old and not knowing about 2FA protocols with Qos or what?
Also, I had a heck of a time logging in to the site, and after I did, I had to reload the site in order to see my post which took too long to find. Where is the "See your Post Button"?