[Tip] WiFi Settings - myTouch 4G General

I typed this up to help out some people with WiFi problems. I find it works great I'm in no way a expert so please feel free to correct me or add to this.
How to check and change WiFi channel.
1. What router do you have? Brand name and model number can be found on the router or if you installed any software when you got it.
2. Check this list for your default ip address CLICK HERE (or follow the steps for ipconfig)
3. Go to the default ip address using your web browser just like you would any other website.
4. You should now be asked for a user name and password this may not have been set. If you don't know the user name check HERE find your router model and try to use whatever it says for username and password or just username and use the password you use to connect to your wireless network. (try Admin or Administrator)
5. After you get logged in you will be able to see all your settings every router is different but you are looking for wireless settings.
6. Turn off 5GHz if you don't need it. 5GHz has a shorter range and I find never works good with our phones. Setting may read (5GHz Network Mode "disabled")
7, Using the WiFi analyzer app from the market find a open or less busy channel. Channel 1 and 6 work best but are the most used. The idea is to make sure you do not overlap anyone in your area.
8. Back on the router settings page you should find 2.4GHz settings. Change the channel to the one you picked from WiFi analyzer.
9. Save settings or apply. After this it is best but not necessary to power everything down router, modem, computer, phone, and get a fresh start. Check the WiFi analyzer app again to make sure the Channel you picked is right and give it a few days of testing.

What a timing! I figured everything you mentioned above last week when I noticed I was getting only 3mbps down on my phone while 25 on the laptop. So I played with channel/width settings and found out that when i use less busy channel instead of auto(which is 1 or 6 or 11), my phone started to get ~23mbps down but my laptop dropped it a bit (~18mbps). I couldnt find a reason why this happened though (tried several times at different time of the day every time rebooting the router) so i reverted back to auto mode since i need highest speed on my laptop. Maybe someone expert in this field can throw some light? Jack_R1, where are you?

Check this website for more info on the channel width info and a bunch more tips on speed.
http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-speed

Swear to god I just figured this channel thing out too. I downloaded wifi analyzer and it said zero stars on channel 11 (which was what my router was broadcasting), and 6 stars for channel 1. So I switched, and its much better.
Sent from my HTC Glacier using xda premium

Related

School wifi problem

Just got my Samsung Captivate about a month and I got my wifi connected to the school network, but when i open the broswer or any apps need internet i didnt get any connections? at the first week it works.. and when connecting to the school wifi it should be come out with the school login page,, then the internet will work.. however the wifi is connected doesnt matter how strong the wifi singal is.. it just cant load and cant bring me to the login page..
I really need help..
and the wifi works everywhere.. except my school...
btw my friends iphone 3gs works..
I am also at college and have had the same problem. the best reason I have found is the phone itself. half of our wifi is an older standard that does not work on the phone. it shows up as wep and i can not get it to recognize it as 802.1x . in my tinkering I have also messed up the wifi that was working.
long story short it probably won't work. I have spent a long time trying to get it to work with no luck
Sent from my SAMSUNG-SGH-I897 using XDA App
Hello to both of you,
I also attend a college with an 802.1x connection and the captivate supports most of these networks; however you will probably need to configure the network settings manually (usually retrievable on your schools IT site). If you dont mind digging up your settings I would love to check to see if I can configure your phone.
FYI, you might be having a problem similar to what's seen in this post.
http://androidforums.com/captivate-support-troubleshooting/142397-odd-netmask-issues-wifi.html
I definitely had this problem today. It appeared connected but no web pages would load. Going to have to investigate further. Why can't things just work
I know my school recently implemented some new security certificates that you must agree to before logging in, has anything like that changed for you? My wife's Aria is running 2.2 and can log into the school network, but my captivate cannot. It is frustrating I know.
Seems some colleges and universities are noticing issues with android devices letting the DHCP leases to expire but keeps using the IP address assigned instead of requesting a new one.
See the following links.
h t t p ://www . natecarlson . com/2010/08/27/android-att-captivates-wifi-networking-is-broken/
h t t p ://www . net . princeton . edu/android/android-stops-renewing-lease-keeps-using-IP-address-11236.html
I actually have similar issues with my Belkin wireless router at home. My laptops and other wireless devices have no problems connecting or re-connecting but the Captivate just refuses to re-connect after the connection was terminated. Even after resetting the router, the phone just keeps trying to use the same IP address for some reason.
The only way I could get it to reconnect is to either reboot the phone or to remove the AP entry which is a pain especially if you have wireless passwords.
Hopefully someone with better insight into how Eclair and Froyo handles WiFi can come up with some fix.
more solutions?
I believe the new 2.2 firmware solves this issue. I too am at College and my captivate FAILS to actually access the internet through wifi unless I statically assigned the IP.
I just updated to Froyo and it connected instantly. I'll have to do more testing to make sure, but I think Samsung finally fixed it.
captivate wifi issue at school
i just got Galaxy S (Captivate) and wi-fi is giving trouble.
when i tried at a university campus, it gives error and says can't open and try again later. it is like, i get connected to the network, IP and DNS and everything is generated. But when i open browser to open a website, instead of taking me to login page it gives the above error.
here is what i get when i try to open a website.
'web page not available'. the page might be temporarily down or it may have been moved permanently to new address.
here are some suggestions:
- check to make sure device has signal and data connection. (I made sure it is connected to wifi)
- reload page later. (i tried after 5 mins, same result)
- view cached copy from google. (doesn't work either)
i am not able to understand why is this happening. i tried restarting the phone after connecting to wifi but no luck. any pointers?
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Hey guys, I have the same problem connecting to m school's network login page. It would say connected but the website always says cant be found. But the good news is that I found a way to connect to it manually! What you need is your captivate and friends iphone 4 or 3gs. First have use your friends iphone to connect to the wifi and then go into wifi settings. You should see 2 DNS address, Ip address, netmask (subnet mask) and router address. Now jot those addresses down except the ip address. Go to settings->wireless and network->Wi-Fi settings->now tap the bottom left button under the samsung logo and click advanced. Now check use static ip. Do not enter anything for your ip address just yet (we will do this last). Now enter router address into gateway, subnet mask into netmask, DNS1 to DNS1 and DNS2 to DNS2. ok when you are done click back and tap the network you want to connect to. Once you are connected jot down your ip address by taping the network once more. now go back to where the static ip was and input the ip address you just jot down into the ip address underneath use static ip. Disconnect and reconnect to the desired network. You may have to do this a few times or reboot your phone. This has been working for me so far around different buildings but with the same school network connection. I hope this helps cheers!
sremick said:
Sounds like they use a portal system which requires logon and doesn't play nice with the Captivate's browser. Unfortunately many such portal systems are written poorly and I've even seen some that only work with Internet Explorer.
You could try a different browser on the Captivate. Dolphin allows spoofing assorted User Agents, which might help.
Click to expand...
Click to collapse
Yeah, my school uses the Bradford dissovable agent. Funny thing is, some connections work perfectly, others not at all. Technically none should work, and sometimes I feel that maybe I should tell them that sometimes somehow it is possible to bypass the whole agent thing- but why rock the boat just yet
Does it need a proxy to work? If so, this app is amazing.
http://forum.xda-developers.com/showthread.php?t=766569
I figured it out a month ago, and it is actually petty easy. But you really have to change ip address manually, usually just the last number.
Sent from my SAMSUNG-SGH-I897 using XDA App

charge wont pick up my wifi

I got my wife a droid charge today which she loves but for some reason the wireless tether from my rezound will not show up on her wifi settings. many other devices detect it including my laptop and even iphones i have unlimited wireless tethering. Im no stranger to rooting so maybe kernel related? I dont know but it dont make sense. Let me stress i dont want to tether with the charge i want it to pick up my rezounds wifi. any suggestions? thanks
Try to manually put in the SSID and other network info?
imnuts said:
Try to manually put in the SSID and other network info?
Click to expand...
Click to collapse
thanks but im not real sure how to do that
Go to Settings>Wireless>Wifi, and there should be an option to add a network/connection. I can get more detailed info once I get home, but there is a way to enter in the connection info even if the phone doesn't see the network.
I've also heard of incompatibilities between various wireless chips that could also be to blame, though you'd have to find someone else to duplicate this to confirm that is the case.
imnuts said:
Go to Settings>Wireless>Wifi, and there should be an option to add a network/connection. I can get more detailed info once I get home, but there is a way to enter in the connection info even if the phone doesn't see the network.
I've also heard of incompatibilities between various wireless chips that could also be to blame, though you'd have to find someone else to duplicate this to confirm that is the case.
Click to expand...
Click to collapse
thank you very much please give me detailed info cuz that subnet and netmask stuff has me lost
oxlong27 said:
thank you very much please give me detailed info cuz that subnet and netmask stuff has me lost
Click to expand...
Click to collapse
If you have DHCP it should fill itself out. Just enter your SSID and hope for the best.
Sent from my SCH-I510 using xda premium
I have had the same problem. When using WirelessTether on my charge I can not get an Samsung Captivate or a HTC incredible to see my SSID..but the laptop connects fine. Anyone know why I cant get the phones to see/connect to my droid charge. I have tried entering info manually on both devices to no avail. Anyone know why it doesnt work?
Judging from the above posts i think we can agree that we found another crap that Samsung took on this phone
Sent from my SCH-I510 using XDA App
I think I've only had one issue not being able to connect to a network. I connect to a large number of WiFi networks and seem to always get a good link (although the WiFi performance isn't all that great- 15mbps one-way.) To resolve the issue I had I think I just pulled the battery from the phone. It may not always be the phone- some access points and routers generally don't work that well, only support some encryption types, fail even though it broadcasts SSID, can drop links, won't authenticate, etc. I deal with bad wireless far more than I care to and I generally quit messing around and run certain model routers with 3rd party firmware because I'm tired of headaches.
Make sure you can connect to your router with other devices.
Power cycle your router.
Pull the battery on the phone.
Enter in the information into Wireless settings. If information is there already, delete the network and re-enter the info.
You can also download WiFi Analyzer from Market and the WiFi Connector Library and just use WiFi Analyzer to manage your networks.
Also, make sure your router is using an unused channel.
xdadevnube said:
I think I've only had one issue not being able to connect to a network. I connect to a large number of WiFi networks and seem to always get a good link (although the WiFi performance isn't all that great- 15mbps one-way.) To resolve the issue I had I think I just pulled the battery from the phone. It may not always be the phone- some access points and routers generally don't work that well, only support some encryption types, fail even though it broadcasts SSID, can drop links, won't authenticate, etc. I deal with bad wireless far more than I care to and I generally quit messing around and run certain model routers with 3rd party firmware because I'm tired of headaches.
Make sure you can connect to your router with other devices.
Power cycle your router.
Pull the battery on the phone.
Enter in the information into Wireless settings. If information is there already, delete the network and re-enter the info.
You can also download WiFi Analyzer from Market and the WiFi Connector Library and just use WiFi Analyzer to manage your networks.
Also, make sure your router is using an unused channel.
Click to expand...
Click to collapse
thanks but i dont have a router i got unlimitws wireless tether (legally) i run all my devices including laptop from it but this damn charge wont recognize it
What device is the providing the signal? Try changing encryption type.
Sent from my SCH-I510 using XDA App
You shouldn't have to enter in any IP/Subnet info. With Wifi turned on, go into Wireless and Networks > Wifi. There should be an option to add a new network. From there, you would just have to enter in the SSID of the network, the encryption type (if any), and passkey (if you're using encryption).

Got my GT7+ yesterday and have a couple questions. Brightness? WiFi?

Edit: This is the Galaxy Tab 7 Plus 4G w/ TMobile...
So far I am loving it. I have had a plethora of Android tablets, including the Galaxy Tab 10.1 (until yesterday), and the original 7" Tab. Here is an issue I have not run into thus far...
Issue 1: I like my brightness settings to be %100 all the time. I always (almost) have a power cable with me, so I'm not worried about the drain. I have the auto setting turned off as to keep it from adjusting on it's own. However, everytime I open the status menu with the brightness slider, it is down to about %90-%95. I can't get it to stay on full. Also, and even more annoying, every time I open the browser, the brightness drops to like %30'ish and I have to open the status menu and slide it back up. The browser is where I REALLY need the full brightness the most, and it's the biggest issue.
I noticed this out of the box, adjusted settings, nogo, so I factory reset, and same issue. This is leading me to believe this is just a setting or something I am missing. Any ideas?
Issue 2 (THE BIG ONE): This Tab 7+ can't see my work wifi. It connects to my wifi at home just fine (did last night at least), which is also WPA, but it doesn't even see the one at work. It acts like it isn't there. In fact, and this is probably important, it is not seeing any networks up here, and there are at least 10-15 that should be visible from my location in the building (all but a couple from other companies). My G2x (Android 2.3) is connected to my work wifi just fine, and it sees all the others around us, the the Tab 7+ right next to it sees none. I also turned on the wifi router on my phone, it will not see that one either. I've verified the wireless is enabled, as well as turning it off and on multiple times and many reboots, nogo... I need it to hit the wifi at work and home so it isn't sucking my 4G data, so this is a big issue for me.Any ideas? I'm at a loss...
Also, to answer before it's asked: Nope, it's not rooted. I may do this at some point (as I do most of my devices), but for the moment I want to leave it stock and not mess with it. These issues seem like they should be resolved/nonexistant in the stock ROM, so I shouldn't have to root to fix them. Please tell me if this is incorrect...
Thanks for any help, sorry for the long post...
(pardon typos, I'm at work and multitasking, no time to proofread)
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
otamctech said:
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
Click to expand...
Click to collapse
Thank you... You're right, it doesn't happen in Dolphin, however I am one of those weird people the really prefers the stock browser...
The biggest issue is the wifi not showing up. I am updating that issue with more info now...
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
gingerboy92 said:
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
Click to expand...
Click to collapse
Ours is on 6... Thanks though
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Shftup said:
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Click to expand...
Click to collapse
........
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
One of the ones we have at work is the same, but not the one I primarily use. That is my backup lol...
otamctech said:
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
Click to expand...
Click to collapse
I did, nogo...
Also, here is a strange thing. About 2 hours ago it notified me there were wireless networks in range, and then showed me 2 random networks from another office. Suddenly, it saw nothing again. Then about 5 minutes ago, while I was in the bathroom ( ), it suddenly showed me ALL of the surrounding networks. Yay! I tried to connect to the one I use, it took my password, but never even attempted to connect. Then, they are gone. Now it doesn't see them.
What. The. Fuuuudge.

Unable to access the internet via WiFi connection

Please help! My R7 plus F cannot access the internet again thru WiFi connection. This is not the first time ( I guess 3rd or 4th), but it now lasted for 4 straight days (and counting). I am very sure that our connection has no problem because I'm using it in my laptop, and I also already refreshed my router, my Oppo unit and even made a factory reset (which was advised by their customer service agent) but nothing worked. :crying::crying::crying:
I have not installed apps that would control my internet like HotSpot Shield or Antivirus. Hope someone could figure this out.
I don't want to bring it to the Service Center (it would take about a minimum of two weeks) aside from I don't have an extra phone. Thank you so much to all who would take time to help. God bless!:angel:
aissa27 said:
Please help! My R7 plus F cannot access the internet again thru WiFi connection. This is not the first time ( I guess 3rd or 4th), but it now lasted for 4 straight days (and counting). I am very sure that our connection has no problem because I'm using it in my laptop, and I also already refreshed my router, my Oppo unit and even made a factory reset (which was advised by their customer service agent) but nothing worked. :crying::crying::crying:
I have not installed apps that would control my internet like HotSpot Shield or Antivirus. Hope someone could figure this out.
I don't want to bring it to the Service Center (it would take about a minimum of two weeks) aside from I don't have an extra phone. Thank you so much to all who would take time to help. God bless!:angel:
Click to expand...
Click to collapse
What exactly do you mean it cannot access Internet, are you saying that it cannot locate/scan WiFi connections or are you saying that you are unable to connect to available WiFi networks.
If it is the former, I was able to fix my problem by installing the latest OTA update/Color OS ROM. The latter I have yet to encounted
Oh..sorry for not giving clear details. My unit can do both, scan and connect to WiFi. But once it is connected to our network at home, the apps and browsers cannot access/use that connection. The browsers and playstore shows error, the Facebook app says "cannot connect right now" and the rest of the apps do tge same.
Though I haven't tried it again with other networks this time.
aissa27 said:
Oh..sorry for not giving clear details. My unit can do both, scan and connect to WiFi. But once it is connected to our network at home, the apps and browsers cannot access/use that connection. The browsers and playstore shows error, the Facebook app says "cannot connect right now" and the rest of the apps do tge same.
Though I haven't tried it again with other networks this time.
Click to expand...
Click to collapse
when you turn wifi off in your phone, does your mobile data work and can all your apps get internet this way?
Yes.. I have no problem with mobile data connection.
I have exactly the same problem as yours! Please help. Thank you
Connected to WiFi but NO internet access RESOLVED!
:victory::victory::victory: CREDITS to Source >> techsiddhi.com ( I ONLY USED METHOD 1, AND IT WORKED IMMEDIATELY! )
How to resolve Connected to WiFi but no internet access for Android
Its true that smartphones are not smart without internet access. Most of the Smartphone users are on Android platform and are increasing day by day. There are numerous Android phones in market from various manufacturers. One issue is common in these droid devices be it from Samsung, Sony , HTC , Motorola , Micromax or any other brand and that is at some point we see these devices connected to wifi but could not connect to internet. Below are simple tricks to try out when you face this issue on your Android device next time.
Method 1 - Change WiFi Setting
Step1: Navigate to Settings > Wifi > Long select on your Wifi Network to see Modify Network Option
Step2: Select Modify Network option
Step3: Enter password
Step4: Check Show Advance option
Step5: Scroll down to view advance options which must be available by now.
Step6: Change IP Settings from DHCP to Static
IP Address : Most probably your Gateway address will be 192.168.1.1 change your IP Address my changing last digit in this address use any value preferably between 2 to 20.
Change DNS1 to 8.8.8.8
Change DNS2 to 8.8.4.4
Step7: Save these settings.
Step8: Login into your wifi network if required, you device should be able to connect to internet by now.
Method 2: Reset Router and Wifi Network
Step1: Navigate to Settings > Wifi > Long select on your Wifi Network to see Forget Network Option
Step2: Select Forget Network
Step3: Switch off your router and wait for 10-15 seconds before restarting it.
Step4: Restart your Wifi router
Step5: Reboot your phone
Step6: Search for your Wifi Network in available Network lists.
Step7: Connect to your network and check if device is connected to internet or not.
Step8: If you are connected to internet by now then you are done else perform Step 2 to Step 8 from Method 1.
Method 3
Update your phone and Router date and time to match internet provider date and time to check if all three are in Sync.
Method 4
If none of above method works than download any Wifi issue Fixing application such as WiFi Fixer. This application will analyze and resolve issues if your device is connected to wifi but not able to connect to internet.

Hotspot issues with Android Pie

I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
baxtex said:
I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
Click to expand...
Click to collapse
@thugslug @jbm76 I know you guys had an issue with hotspot. Is this the same problem?
yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
Point 2 sounds like it..
jbm76 said:
Point 2 sounds like it..
Click to expand...
Click to collapse
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
yldlj said:
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
Click to expand...
Click to collapse
Yep that fixed for me ??
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
His first problem I don't have, but it's the second that's the same issue as mine.
Obviously he's never searched or he'd have found my lengthy post not very far back.
The solution is there too.
I've never tried turning the VPN on to see if I get through access to the internet that way. I can't now as I've applied the fix @jbm76 found, and I don't really want to back out the fix to try it.
Definitely an area where pie has gone backwards. For those of us affected anyway.
Edit.... Sorry, I didn't note that this was a new thread.
My post is in the OB4 thread (which I at first thought this was). I'm tired and didn't look well enough.
jbm76 said:
Yep that fixed for me ?
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
Click to expand...
Click to collapse
I will try these and report back.
baxtex said:
I will try these and report back.
Click to expand...
Click to collapse
If you get errors at the cmd prompt make sure usb debugging is set 'on' on the phone.
Followed the commands and it seemed to do the trick! Many many thanks!
baxtex said:
Followed the commands and it seemed to do the trick! Many many thanks!
Click to expand...
Click to collapse
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
jbm76 said:
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
Click to expand...
Click to collapse
Sweden.
I want to remember that it did work before, then I have to reflash Pie again and that's when the issues started.
I still wanted to say that I still suffering from the first problem, having difficulties actually finding the hotspot at all.
Its very odd. This problem has started to arise again. I tried running adb shell settings get global tether_dun_required again but I get the answer that it is 0 so that looks fine. I haven't updated anything since I had this problem the last time.
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
MetroWestMA said:
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
Click to expand...
Click to collapse
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
baxtex said:
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
Click to expand...
Click to collapse
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
MetroWestMA said:
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
Click to expand...
Click to collapse
USB tethering works fine, dns as well. Its just the connection, it is very difficult to connect anything to the Oneplus 6 in wifi crowded areas.
Will this effect Bluetooth tethering too? Or is there another command for that? Dang built in hot spot get horrible speed after this setting is set, at least be on T-Mobile.
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
khrisstyan said:
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
Click to expand...
Click to collapse
Read this thread. Workaround in here.

Categories

Resources