hello.
i have sensation that is s-off and rooted.
now i want to unroot and i am confused.
i know that my phone came with 1.xx.401 firmware and i have same RUU.
now, do i really need to change to supercid?
RUU will remove revolutionary and CWM and i can do secureflag3 later, right?
i don't see the point in changig cids
thanx
The Super CID is needed to downgrade the HBOOT as Revolutionary changes it to a non-standard one. You can try it without Super CID but if it doesn't work then you'll need to use it. you can then change it back to your current one before running the S-ON command
i've done it without supercid with no problems!
my phone is now stock with s-on
thanx for help!
Wasn't sure if it would work or not, nice to know you don't need it for your own RUU
Related
Hey guys
If I'm not wrong SuperCID is the manufacturer code, which prevents me to flash any Custom ROM and staying on Stock ROM, right?
So, if I didn't do SuperCID and still on Stock ROM, can I use RUU to return back to S-ON? If yes, will it install even if the RUU isn't the right one for the device?
Thank you
Super CID means you can flash ANY RUU you decide to try
So if I didn't do the SuperCID, if I choose the wrong RUU, it will not get flashaed or will it continue and I'll end up with a brick?
Edit: I found this: "If they don't have SuperCID, they'll get 'ERROR[131]: CUSTOMER ID ERROR' if they try to flash the wrong RUU and it will stop without flashing anything to the phone." Can anybody confirm that it's right?
Thank you
That is correct. With your normal CID you can only flash RUUs that are for your phone. WIth Super CID you can flash any RUU that takes your fancy
Are there any downsides from using SuperCID?
WTFD4V1D said:
Are there any downsides from using SuperCID?
Click to expand...
Click to collapse
I would also like to know this
Sent from my HTC Sensation 4G using XDA App
Others have reported that with super CID, they were not getting the updates from htc, but some said that they still received official updates from htc even with super CID. There are no real downsides to superCID as far as I know except maybe when you return it for warranty purposes, but you can always put your original CID back. Just take note of your original CID before you super CID.
The alternative to SuperCID is to flash the ENG hboot after you're s-off. The ENG hboot will disregard a CID mismatch.
Guys,
Noob question: do I have to be rooted to get superCIDed?
I didn't create any SuperCID when unlocking bootloader with Revolutionary... If that bad? Can i get that again?
brusko1972 said:
Others have reported that with super CID, they were not getting the updates from htc, but some said that they still received official updates from htc even with super CID. There are no real downsides to superCID as far as I know except maybe when you return it for warranty purposes, but you can always put your original CID back. Just take note of your original CID before you super CID.
Click to expand...
Click to collapse
I got a update from HTC, didn't istall it though.
Yes, i have SuperCid
EddyOS said:
Super CID means you can flash ANY RUU you decide to try
Click to expand...
Click to collapse
Thank you guy, you answered to my question!
How would I go about doing this sso I can sell it? I'm currently on a 3.5 rom.
Same problem here (warranty exchange). I've done everything recommended here http://forum.xda-developers.com/showthread.php?t=1192300 but when I rune the .exe, I get an error [155] (incorrect ruu). I have searched everywhere for an up-to-date RUU, but have not had any luck.
You need to change your cid number to correspond with your carrier if you search the forums there is a list of them I presume you know how to go about this as you would have to have the super cid 11111111 or Eu HTC__001 to flash another Ruu other than your carriers
Sent from my HTC Sensation Z710e using XDA App
Change Cid number? Why would I have to do this? I've never messed with that before.
My apologies I presumed you had installed a unbranded firmware prior to rooting
Normally you have to change the cid to do this as the gold card method won't work
Sent from my HTC Sensation Z710e using XDA App
I followed a thread here to return to S-ON and then flashed the newest RUU from the post that lists all of the RUU's for the Sensation.
alright I've been reading and I'm still a little confused.
Basically, I have an s-off sensation with root and a rom. It's a T-Mobile sensation. I never debranded or anything like that.
What exactly do I need to do to return to stock as if I just bough it? I also noticed there are two TMOUS ruu files....which one do I use?
OK, lets begin
When you S-OFF'd the HBOOT changed to a newer one than your stock, TMOUS ROM. Because of this, you NEED Super CID to be able to go to a lower HBOOT. So that's why you need to change to it.
Once done, you can flash the stock 1.29.531.2 RUU. Once this has completed, you can change the CID back to the TMOUS one and then go back to S-ON and voila - one stock, ready to sell Sensation
Has any one got the Vodafone UK ROM please?
Cancel that. The download hasn't got that long left, so I'll just wait for it to finish.
EddyOS said:
OK, lets begin
When you S-OFF'd the HBOOT changed to a newer one than your stock, TMOUS ROM. Because of this, you NEED Super CID to be able to go to a lower HBOOT. So that's why you need to change to it.
Once done, you can flash the stock 1.29.531.2 RUU. Once this has completed, you can change the CID back to the TMOUS one and then go back to S-ON and voila - one stock, ready to sell Sensation
Click to expand...
Click to collapse
Thanks....so how exactly would I do this super CID thing? lol
So basically...do super cid thing, flash stock RUU, then super cid again? Sorry, I've never really done much other than flash roms, so I don't know what this cid stuff is.
You should've really learnt all this before jumping in as you should always know how to get out of something before you go ahead with it.
The guide you followed to S-OFF has the Super CID procedure:
http://forum.xda-developers.com/showthread.php?t=1192300
However, before changing it you need to make a note of your current one. To do so, you need to run the following fastboot command:
fastboot getvar cid
Once done, use the guide above to write the Super CID. This will allow you to flash the 1.29.531.2 RUU.
Then, using the same procedure as writing Super CID, write your old one back. Then follow the guide to get S-ON
Having said all that, you could just try flashing the 1.29.531.2 RUU and if it works then follow the guide to go back to S-ON - it may work
I have tried to change it to 111111... but the exe gives me the error nontheless. What do i change the CID TO?
akbisw said:
I have tried to change it to 111111... but the exe gives me the error nontheless. What do i change the CID TO?
Click to expand...
Click to collapse
I'm sure you've already figured it out since the thread hasn't been updated since a couple of months back, but here's the link to the thread with the answer if anyone gets here while searching for the right T-MOUS Stock CID for sensation:
http://forum.xda-developers.com/showthread.php?p=23046170
be careful
if u updated firmware to ics be careful before flashing an ruu this messed up my phone
Sorry for bumping an old topic, this topic was helpful with what I needed. I need to return my phone to stock for a replacement. I completed all the steps but what can I double check to make sure I did it correct. I have stock rom and s on. My CID still shows "11111111". I was trying to get the OTA update to ICS but it won't let me download it so it worries me that I still am not completely stock.
Hi all,
Used revolutionary to s-off my phone simply to debrand it.. I have now changed the CID which i wanted and now wondering how can I revert back to standard/stock bootloader with S-on and get OTA?
The current bootloader also reads revolutionary highlighted in pink with white hand writing..
I have already followed the very useful and comprehensive guide Viper put but I must be doing something wrong and Im lost needing help
Cheers
This might help. http://theunlockr.com/2011/10/03/how-to-unroot-the-htc-sensation-4g
Run the RUU you want to use, that'll restore the stock HBOOT. Then restore the CID to whatever you wanna use and just S-ON as per the guide
EddyOS said:
Run the RUU you want to use, that'll restore the stock HBOOT. Then restore the CID to whatever you wanna use and just S-ON as per the guide
Click to expand...
Click to collapse
Eddy, I will try and report back... cheers mate
Update...
Got it all working... cheers guys..
Apparently, I wasnt able to install RUU as the phone had a SuperCID 11111111, I changed it to HTC__001 and its all good.. got a stock rom now and really chuffed..
install and old RUU and had OTA update to 1.50.. ya beauty !!!
I have been trying to run a RUU to unroot the phone before I bring it in for a repair. I keep getting the 155 error and I searched through google for help on the error. I have read a few post about it but nothing works. I tried to run it through fastboot as well and that does not work. My phone information while in bootloader is Evita pvt ship s-on rl hboot 1.09.0000 radio .17.32.09.12 and I am running cleanrom v 6.5 as my rom. Since my rom and boot.img is based of 3.18 I tried to run the ruu on 3.18. Im not sure if its because it is an older verdion of bootloader while im running a rom that is based off the 3.18. So I also tried to flash a older rom and run the ruu for 1.73 but that didnt work either. Im stumped and very frustrated so please I need your help.
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Arrow44 said:
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
Yeah for the 3.18 its http://bugsylawson.com/HTCFiles/Evi....24p.32.09.06_10.130.32.34_release_signed.exe
and for the 1.73 its http://www.ponack.net/designgears/b...73.502.2_2FE6772699D8596307CC997452BB8D25.exe
Also I read that in order to use the RUU correct I need to soff the phone, but then I cant upgrade the firmware to jellybean. Do you know if this is correct?
The phone will brick if you try to ruu or update to 3.18 while S-ON and superCID. Your CID right now, no doubt is 11111111. When the RUU runs it checks to see what your CID is, if it's not what it should be, it gives an error. If you change your CID back to CWS__001 you can run the 1.73 RUU but you can never update to 3.18 unless you S-OFF first or you'll brick.
to check your CID fastboot oem readcid.
You can change it once without S-OFF with fastboot oem writecid CWS__001 but you can't change it again with that command unless you're S-OFF
Arrow44 said:
Could you post the download link for the RUU? Just wanna make sure you go the right one.
Sent from my HTC One XL using xda premium
Click to expand...
Click to collapse
exad said:
The phone will brick if you try to ruu or update to 3.18 while S-ON and superCID. Your CID right now, no doubt is 11111111. When the RUU runs it checks to see what your CID is, if it's not what it should be, it gives an error. If you change your CID back to CWS__001 you can run the 1.73 RUU but you can never update to 3.18 unless you S-OFF first or you'll brick.
to check your CID fastboot oem readcid.
You can change it once without S-OFF with fastboot oem writecid CWS__001 but you can't change it again with that command unless you're S-OFF
Click to expand...
Click to collapse
Ok thanks. Im in the process of doing the S-OFF right now. What I want to do is get rid of the red text and make my phone look like the bootloader is locked and never tampered with. I remember doing this with my EVOLTE so it will look like the phone is S-ON and locked. After all that run the RUU for 2.20 so it can get repaired. Now after the repair I can root again and upgrade to the Jellybean firmware right?
cables2590 said:
Ok thanks. Im in the process of doing the S-OFF right now. What I want to do is get rid of the red text and make my phone look like the bootloader is locked and never tampered with. I remember doing this with my EVOLTE so it will look like the phone is S-ON and locked. After all that run the RUU for 2.20 so it can get repaired. Now after the repair I can root again and upgrade to the Jellybean firmware right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2156368
hey guys. one problem.. i want to go back to stock ROM. i am supercid and s-off so i understood that i can use any RUU, but i downloaded one and failed because it says get the correct ROM update utility. i locked the bootloader too.
i have maximus hd atm , so which RUU should i use?
Hboot 2.16
Radio 1.20
supercid
s-off
Did you run the ruu while your phone was in fastboot mode? Otherwise the downgrade won't work.
Edit: As you already said, it doesn't matter which ruu you take since your phone is S-OFF. If you try to run an ICS ruu be sure not to install OTAs if you're on superCID or you're going to brick your phone.