Hey guys
If I'm not wrong SuperCID is the manufacturer code, which prevents me to flash any Custom ROM and staying on Stock ROM, right?
So, if I didn't do SuperCID and still on Stock ROM, can I use RUU to return back to S-ON? If yes, will it install even if the RUU isn't the right one for the device?
Thank you
Super CID means you can flash ANY RUU you decide to try
So if I didn't do the SuperCID, if I choose the wrong RUU, it will not get flashaed or will it continue and I'll end up with a brick?
Edit: I found this: "If they don't have SuperCID, they'll get 'ERROR[131]: CUSTOMER ID ERROR' if they try to flash the wrong RUU and it will stop without flashing anything to the phone." Can anybody confirm that it's right?
Thank you
That is correct. With your normal CID you can only flash RUUs that are for your phone. WIth Super CID you can flash any RUU that takes your fancy
Are there any downsides from using SuperCID?
WTFD4V1D said:
Are there any downsides from using SuperCID?
Click to expand...
Click to collapse
I would also like to know this
Sent from my HTC Sensation 4G using XDA App
Others have reported that with super CID, they were not getting the updates from htc, but some said that they still received official updates from htc even with super CID. There are no real downsides to superCID as far as I know except maybe when you return it for warranty purposes, but you can always put your original CID back. Just take note of your original CID before you super CID.
The alternative to SuperCID is to flash the ENG hboot after you're s-off. The ENG hboot will disregard a CID mismatch.
Guys,
Noob question: do I have to be rooted to get superCIDed?
I didn't create any SuperCID when unlocking bootloader with Revolutionary... If that bad? Can i get that again?
brusko1972 said:
Others have reported that with super CID, they were not getting the updates from htc, but some said that they still received official updates from htc even with super CID. There are no real downsides to superCID as far as I know except maybe when you return it for warranty purposes, but you can always put your original CID back. Just take note of your original CID before you super CID.
Click to expand...
Click to collapse
I got a update from HTC, didn't istall it though.
Yes, i have SuperCid
EddyOS said:
Super CID means you can flash ANY RUU you decide to try
Click to expand...
Click to collapse
Thank you guy, you answered to my question!
Hi all,
Used revolutionary to s-off my phone simply to debrand it.. I have now changed the CID which i wanted and now wondering how can I revert back to standard/stock bootloader with S-on and get OTA?
The current bootloader also reads revolutionary highlighted in pink with white hand writing..
I have already followed the very useful and comprehensive guide Viper put but I must be doing something wrong and Im lost needing help
Cheers
This might help. http://theunlockr.com/2011/10/03/how-to-unroot-the-htc-sensation-4g
Run the RUU you want to use, that'll restore the stock HBOOT. Then restore the CID to whatever you wanna use and just S-ON as per the guide
EddyOS said:
Run the RUU you want to use, that'll restore the stock HBOOT. Then restore the CID to whatever you wanna use and just S-ON as per the guide
Click to expand...
Click to collapse
Eddy, I will try and report back... cheers mate
Update...
Got it all working... cheers guys..
Apparently, I wasnt able to install RUU as the phone had a SuperCID 11111111, I changed it to HTC__001 and its all good.. got a stock rom now and really chuffed..
install and old RUU and had OTA update to 1.50.. ya beauty !!!
My phone is s-on and I need to go back to stock rom. CID is telus001. The RUU that is available for Telus has a 0.16 radio and the RUU fails. I need a Telus RUU with 0.17.31501s.10_2
It is the exact same radio as the current BM RUU but unfortunately that RUU doesn't work for me because its the wrong CID.
Yea I should have done a back up of the phone before I installed a custom rom. Silly me.
Anyways, I was wondering if anyone has a backup of a telus phone with the proper radio version they can share?
try here, maybe you'll find what you want
http://forum.xda-developers.com/showthread.php?t=1998270
ultimul said:
try here, maybe you'll find what you want
http://forum.xda-developers.com/showthread.php?t=1998270
Click to expand...
Click to collapse
As I said I am S-ON so I cannot change the radio so I don't think those links will help. Actually I don't think any of that information helps for getting back to stock anyways.
I can't get S-OFF either because the procedure for setting superCID to do easy S-OFF doesn't work for me and I don't want to do the difficult and risky S-OFF procedure.
you don't need s-off to flash radios in recovery
and, btw the s-off procedure is extremely simple and straight forward; took me 5 min 2 days ago, acquiring supercid included
ultimul said:
you don't need s-off to flash radios in recovery
and, btw the s-off procedure is extremely simple and straight forward; took me 5 min 2 days ago, acquiring supercid included
Click to expand...
Click to collapse
I finally figured out SuperCID by changing to a different hex editor and after I changed that I was able to do the facepalm s-off procedure. So I should be able to run any RUU now. Thanks for the help guys.
Btw, I could be wrong but from what I have read you cannot flash radios with Hboot 1.13 (which is what I have) if your are s-on. Should not be a problem now that I am s-off.
Still not sure if RUU will allow a radio downgrade but I know the BM RUU has the same version of my radio so that one should do fine.
WARNING*WARNING*WARNING
do this at your own risk! This is for s4 only!!
It has been brought to my attention that there might be a mid (model id) conflict
With flashing this and me along with others are trying to narrow down the issue. Thanks to @real187 for bring this to my attention.
I'm
S-off
Cid 11111111
MID PJ4011000
And had no problems flashing this firmware but others with same setup have reported soft brick.
OK I think @mkinney88 may have pin pointed where the soft brick may be coming from. If you s-off using facepalm, flash the firmware.zip and get soft bricked try this.
1. Get back to s-on (warning read directions several times before doing you CAN hard brick your phone) ~ http://forum.xda-developers.com/showthread.php?p=38267667
2. Get s-off with moonshine ~ http://forum.xda-developers.com/showthread.php?p=42613403
First off this is mostly ment for the T-Mobile branded phones but ill try and help all please let me know when asking questions if you have a T-Mobile or HTC branded phone (it has it right on the front of phone ).
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111 (I had no problem flashing firmware with s-off and Cid 11111111 but others have reported problems so if you don't want to chance it write your Cid to T-MOB010)
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Downloads
FIRMWARE ZIP DOWNLOAD
https://drive.google.com/folderview?id=0B-BYnLh2sosKamRwaUJJS05oU3M&usp=sharing or http://db.tt/Wua8mDS2
Credit go's to mkinney88 for the firmware
Bricks
First off if you can get into bootloader then you don't have a hard brick.
If your phone is in the black screen of death there may be hope but we're still trying to figure that one out.
If your phone doesn't respond to any input from you (power, power+volume down) then congratulations you have a hard brick but don't through it in the junk drawer just yet, you can have it jtag repaired (they open phone plug into main board and flash everything)
Here's the link (you do have to pay for this)
http://forum.xda-developers.com/showthread.php?p=37136553
One more just in case
rc420head said:
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Click to expand...
Click to collapse
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
vatsaman said:
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
Click to expand...
Click to collapse
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
I put a note of this in op just now, thanks for the warning, I'm trying to figure out why some can do this Cid 11111111 and some can't.
-----------------------------------------
Friends don't let friends post without searching first!
rc420head said:
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
Click to expand...
Click to collapse
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
Something else is going on. I used facepalm, and Cid 11111111 to flash firmware twice now with no issues and started same as you hboot 1.14
-----------------------------------------
Friends don't let friends post without searching first!
thank you!
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
khan.orak said:
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
Click to expand...
Click to collapse
I'm not sure if I understand your question. So let me ask a few questions.
What hboot are you on?
What carrier are you using?
Are you wanting to try cm 10.1 and afraid for losing stock?
What is stock just HTC sense 4+ or is there carrier added stuff?
rc420head said:
I'm not sure if I understand your question. So let me ask a few questions.
Click to expand...
Click to collapse
ok I'll try to make it clearer.
What hboot are you on?
Click to expand...
Click to collapse
I'm on hboot 2.15.0000
What carrier are you using?
Click to expand...
Click to collapse
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Are you wanting to try cm 10.1 and afraid for losing stock?
Click to expand...
Click to collapse
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
What is stock just HTC sense 4+ or is there carrier added stuff?
Click to expand...
Click to collapse
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
khan.orak said:
ok I'll try to make it clearer.
I'm on hboot 2.15.0000
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
Click to expand...
Click to collapse
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
rc420head said:
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
Click to expand...
Click to collapse
Thanks for the reply, really much appreciated.
I already have rooted the device and custom recovery TWRP 2.5. Though I am considering to downgrade it to 2.3.30. Now I made a backup of stock ROM. (System + Boot Partition)
So is this the only way I can get to stock?
I read somewhere that the following method could be used too(?)
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
khan.orak said:
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
Click to expand...
Click to collapse
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Big thanks! :good:
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Yes this will also work (I was under the impression no ruu's were available)
khan.orak said:
Big thanks! :good:
Click to expand...
Click to collapse
forgiven90 said:
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yeah disabling the fast dormancy solved all my problems. :good:
Hey guys,
im pretty done at the moment.
I'm trying to get back to stock on my HTC Sensation and already spent like 3 hours to get it.
So, my current infos:
unlocked
s-on
hboot 1.27
ARHD custom rom
ext4 custom recovery
So, i downloaded equals roms from here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid (equals with the ARHD rom, i already tried others, but it still fails)
but i dont know what to do now.
When i relock bootloaded it fails, when im on ROM the itself it fails.
What should i do actually? i followed this guide: http://forum.xda-developers.com/showthread.php?t=1672425
But i dont get it - do i really need s-off to go back to stock?
Isnt there an easier way to do it? im pretty done at the moment and simply want to have it stock, help me guys...
// PS my CID is this: VODAP102 and i already tried to run this: RUU-Pyramid-ICS-Vodafone-DE-3.32.162.11-R-Radio-11.69A.3504.00U-11.23.3504.07-M2-release-251539-signed but it says wrong image... i will throw this thing on the wall soon
kewkie said:
Hey guys,
im pretty done at the moment.
I'm trying to get back to stock on my HTC Sensation and already spent like 3 hours to get it.
So, my current infos:
unlocked
s-on
hboot 1.27
ARHD custom rom
ext4 custom recovery
So, i downloaded equals roms from here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid (equals with the ARHD rom, i already tried others, but it still fails)
but i dont know what to do now.
When i relock bootloaded it fails, when im on ROM the itself it fails.
What should i do actually? i followed this guide: http://forum.xda-developers.com/showthread.php?t=1672425
But i dont get it - do i really need s-off to go back to stock?
Isnt there an easier way to do it? im pretty done at the moment and simply want to have it stock, help me guys...
// PS my CID is this: VODAP102 and i already tried to run this: RUU-Pyramid-ICS-Vodafone-DE-3.32.162.11-R-Radio-11.69A.3504.00U-11.23.3504.07-M2-release-251539-signed but it says wrong image... i will throw this thing on the wall soon
Click to expand...
Click to collapse
not sure, but i'd say you need S-OFF for that
chmurak said:
not sure, but i'd say you need S-OFF for that
Click to expand...
Click to collapse
Think so too.
Sent from my GT-I9505 using Tapatalk
if your firmware is higher then the one which is in the ruu.exe then you can't downgrade while on S-ON
you need to S-OFF for downgrade
AFAIK with your cid there is no ruu.exe with the same firmware as yours or higher
what about if you try create a goldcard first..then you can flashing different RUU that are already had a higher firmware version than yours..?, like this RUU maybe..or else that are already had 3.33.xxx.xx firmware?
don't forget to relock your bootloader first too..
You could also attempt to downgrade your misc partition that would allow you to flash a lower RUU as long as the hboot inside was not a gingerbread downgrade I think.
Sent from my HTC Sensation using Tapatalk