S-OFF for back to stock? serously? - HTC Sensation

Hey guys,
im pretty done at the moment.
I'm trying to get back to stock on my HTC Sensation and already spent like 3 hours to get it.
So, my current infos:
unlocked
s-on
hboot 1.27
ARHD custom rom
ext4 custom recovery
So, i downloaded equals roms from here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid (equals with the ARHD rom, i already tried others, but it still fails)
but i dont know what to do now.
When i relock bootloaded it fails, when im on ROM the itself it fails.
What should i do actually? i followed this guide: http://forum.xda-developers.com/showthread.php?t=1672425
But i dont get it - do i really need s-off to go back to stock?
Isnt there an easier way to do it? im pretty done at the moment and simply want to have it stock, help me guys...
// PS my CID is this: VODAP102 and i already tried to run this: RUU-Pyramid-ICS-Vodafone-DE-3.32.162.11-R-Radio-11.69A.3504.00U-11.23.3504.07-M2-release-251539-signed but it says wrong image... i will throw this thing on the wall soon

kewkie said:
Hey guys,
im pretty done at the moment.
I'm trying to get back to stock on my HTC Sensation and already spent like 3 hours to get it.
So, my current infos:
unlocked
s-on
hboot 1.27
ARHD custom rom
ext4 custom recovery
So, i downloaded equals roms from here: http://www.shipped-roms.com/index.php?category=android&model=Pyramid (equals with the ARHD rom, i already tried others, but it still fails)
but i dont know what to do now.
When i relock bootloaded it fails, when im on ROM the itself it fails.
What should i do actually? i followed this guide: http://forum.xda-developers.com/showthread.php?t=1672425
But i dont get it - do i really need s-off to go back to stock?
Isnt there an easier way to do it? im pretty done at the moment and simply want to have it stock, help me guys...
// PS my CID is this: VODAP102 and i already tried to run this: RUU-Pyramid-ICS-Vodafone-DE-3.32.162.11-R-Radio-11.69A.3504.00U-11.23.3504.07-M2-release-251539-signed but it says wrong image... i will throw this thing on the wall soon
Click to expand...
Click to collapse
not sure, but i'd say you need S-OFF for that

chmurak said:
not sure, but i'd say you need S-OFF for that
Click to expand...
Click to collapse
Think so too.
Sent from my GT-I9505 using Tapatalk

if your firmware is higher then the one which is in the ruu.exe then you can't downgrade while on S-ON
you need to S-OFF for downgrade
AFAIK with your cid there is no ruu.exe with the same firmware as yours or higher

what about if you try create a goldcard first..then you can flashing different RUU that are already had a higher firmware version than yours..?, like this RUU maybe..or else that are already had 3.33.xxx.xx firmware?
don't forget to relock your bootloader first too..

You could also attempt to downgrade your misc partition that would allow you to flash a lower RUU as long as the hboot inside was not a gingerbread downgrade I think.
Sent from my HTC Sensation using Tapatalk

Related

Get back to stock sensation (T-Mobile) with s-on?

How would I go about doing this sso I can sell it? I'm currently on a 3.5 rom.
Same problem here (warranty exchange). I've done everything recommended here http://forum.xda-developers.com/showthread.php?t=1192300 but when I rune the .exe, I get an error [155] (incorrect ruu). I have searched everywhere for an up-to-date RUU, but have not had any luck.
You need to change your cid number to correspond with your carrier if you search the forums there is a list of them I presume you know how to go about this as you would have to have the super cid 11111111 or Eu HTC__001 to flash another Ruu other than your carriers
Sent from my HTC Sensation Z710e using XDA App
Change Cid number? Why would I have to do this? I've never messed with that before.
My apologies I presumed you had installed a unbranded firmware prior to rooting
Normally you have to change the cid to do this as the gold card method won't work
Sent from my HTC Sensation Z710e using XDA App
I followed a thread here to return to S-ON and then flashed the newest RUU from the post that lists all of the RUU's for the Sensation.
alright I've been reading and I'm still a little confused.
Basically, I have an s-off sensation with root and a rom. It's a T-Mobile sensation. I never debranded or anything like that.
What exactly do I need to do to return to stock as if I just bough it? I also noticed there are two TMOUS ruu files....which one do I use?
OK, lets begin
When you S-OFF'd the HBOOT changed to a newer one than your stock, TMOUS ROM. Because of this, you NEED Super CID to be able to go to a lower HBOOT. So that's why you need to change to it.
Once done, you can flash the stock 1.29.531.2 RUU. Once this has completed, you can change the CID back to the TMOUS one and then go back to S-ON and voila - one stock, ready to sell Sensation
Has any one got the Vodafone UK ROM please?
Cancel that. The download hasn't got that long left, so I'll just wait for it to finish.
EddyOS said:
OK, lets begin
When you S-OFF'd the HBOOT changed to a newer one than your stock, TMOUS ROM. Because of this, you NEED Super CID to be able to go to a lower HBOOT. So that's why you need to change to it.
Once done, you can flash the stock 1.29.531.2 RUU. Once this has completed, you can change the CID back to the TMOUS one and then go back to S-ON and voila - one stock, ready to sell Sensation
Click to expand...
Click to collapse
Thanks....so how exactly would I do this super CID thing? lol
So basically...do super cid thing, flash stock RUU, then super cid again? Sorry, I've never really done much other than flash roms, so I don't know what this cid stuff is.
You should've really learnt all this before jumping in as you should always know how to get out of something before you go ahead with it.
The guide you followed to S-OFF has the Super CID procedure:
http://forum.xda-developers.com/showthread.php?t=1192300
However, before changing it you need to make a note of your current one. To do so, you need to run the following fastboot command:
fastboot getvar cid
Once done, use the guide above to write the Super CID. This will allow you to flash the 1.29.531.2 RUU.
Then, using the same procedure as writing Super CID, write your old one back. Then follow the guide to get S-ON
Having said all that, you could just try flashing the 1.29.531.2 RUU and if it works then follow the guide to go back to S-ON - it may work
I have tried to change it to 111111... but the exe gives me the error nontheless. What do i change the CID TO?
akbisw said:
I have tried to change it to 111111... but the exe gives me the error nontheless. What do i change the CID TO?
Click to expand...
Click to collapse
I'm sure you've already figured it out since the thread hasn't been updated since a couple of months back, but here's the link to the thread with the answer if anyone gets here while searching for the right T-MOUS Stock CID for sensation:
http://forum.xda-developers.com/showthread.php?p=23046170
be careful
if u updated firmware to ics be careful before flashing an ruu this messed up my phone
Sorry for bumping an old topic, this topic was helpful with what I needed. I need to return my phone to stock for a replacement. I completed all the steps but what can I double check to make sure I did it correct. I have stock rom and s on. My CID still shows "11111111". I was trying to get the OTA update to ICS but it won't let me download it so it worries me that I still am not completely stock.

revert to standard bootloader and S-On

Hi all,
Used revolutionary to s-off my phone simply to debrand it.. I have now changed the CID which i wanted and now wondering how can I revert back to standard/stock bootloader with S-on and get OTA?
The current bootloader also reads revolutionary highlighted in pink with white hand writing..
I have already followed the very useful and comprehensive guide Viper put but I must be doing something wrong and Im lost needing help
Cheers
This might help. http://theunlockr.com/2011/10/03/how-to-unroot-the-htc-sensation-4g
Run the RUU you want to use, that'll restore the stock HBOOT. Then restore the CID to whatever you wanna use and just S-ON as per the guide
EddyOS said:
Run the RUU you want to use, that'll restore the stock HBOOT. Then restore the CID to whatever you wanna use and just S-ON as per the guide
Click to expand...
Click to collapse
Eddy, I will try and report back... cheers mate
Update...
Got it all working... cheers guys..
Apparently, I wasnt able to install RUU as the phone had a SuperCID 11111111, I changed it to HTC__001 and its all good.. got a stock rom now and really chuffed..
install and old RUU and had OTA update to 1.50.. ya beauty !!!

[HOWTO] [HTC One SV] Unbrand your phone to get the OTA updates

Bonjour everyone, here's a little guide on how to unbrand your phone in order to get the OTA updates notifications directly and be able to install them.
If you want to get S-OFF one day on your One SV, read this first. You need to change CID to SuperCID to do so, and it's not possible (for the moment) if you upgrade to JB
Basically this works as long as your phone model is sold unbranded somewhere in the world and that the people having such a phone got an OTA update.
For now, ther's no way to change CID if you're running JB and are S-ON. That means that this only work for One SV's running ICS who want to get the OTA updates.
As far as I know, it works on K2_U and K2_UL, since they both got an OTA update to JB.
The trick is simple, I didn't invent it and haven't been able to find its original founder, but thanks a lot to her or him !
I'm basically just a messenger here since I only tried out some stuff that worked with other phones, so thanks a lot to bkcokota, old.splatterhand and jmztaylor
Don't try it if you're worried, bricks happen, you'd be the only one responsible !
Here we go :
1. First you need to root your phone, here's how.
2. Change you CID using the same method than for the One S.
Personnaly, I changed it to "HTC__203", which is the CID unbranded HTC phones have in France (HTC-FRA).
For example, "HTC__001" is HTC-WWE, which stands for World Wide English.
You can change it to whatever CID you like : choose it well. I can only recommend to use HTC__203 since it's the only one I tried and that it worked, but do as you please !
3. Flash stock recovery back. You'll find it here or here. Flash it like you flashed CWM recovery (into fastboot, using fastboot flash recovery xxxxxx.img).
4. Relock your bootloader. It's possible that it's not necessary, but it can't hurt ("fastboot oem lock", when in fastboot usb)
5. Run a RUU that matches you unbranded CID to get an "unbranded" rom.
You'll find them here, for example. The "RUU_K2_UL_ICS_40_HTC_Europe_1.17.401.5_R....exe" one will work with HTC__203 and HTC__001 CIDs.
6. Go ask your phone if he can find any updates
WARNING : for the moment there's no way to change CID if you upgrade to JB since the newer HBOOT (v2.00) don't let you do it. That means that for now you won't be able to S-OFF if you upgrate to JB using this method. For now...
Nice one!
Only thing i would add for people to know:
if somebody want to get S-Off, they should change the CID to SuperCID 11111111 (or if you want 22222222,...).
old.splatterhand said:
Nice one!
Only thing i would add for people to know:
if somebody want to get S-Off, they should change the CID to SuperCID 11111111 (or if you want 22222222,...).
Click to expand...
Click to collapse
Done, sir.
It was only said at the bottom of the message at first, but now I put it at the beginning as well.
There's one thing that I'm trying to get though : according to a lot of people and forums, you don't get OTA when you have SuperCID... but some poeple say they do.
It probably changes depending on the type of HTC phone, but also depending on the OTA (some got the first ones, but not the latest...).
I got the ota notification with SuperCID, i think it depends on more things.
But there i'm not far enough into it.
I have had no success at all. My story:
Updated a branded phone to JB, rooted. Then I did a moonshine S-off and changed CID to HTC__001 (even tried 11111111).
I have downloaded a ICS RUU (couldn't find stock K2_UL so I thought that I would download ICS first and then do OTA to JB) but I am getting error 158. I have checked md5 sum and it matches (http://androidfiles.org/ruu/getdown...0.14_2_10.49.40.11L_release_301902_signed.exe). Any ideas?
If you're on jb and hboot 2.00, that's normal... and written in the first post.
There is information that it is impossible to change CID while on JB and with 2.0 hboot, but I guess that I have had success in changing to superCID (at least this is what I can read in bootloader and using fastboot oem readcid command.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Is there any chance to make this for the k2cl ( boost mobile ) version?
idr666 said:
Is there any chance to make this for the k2cl ( boost mobile ) version?
Click to expand...
Click to collapse
Can you be more specific, what you mean with "this".
old.splatterhand said:
Can you be more specific, what you mean with "this".
Click to expand...
Click to collapse
Sorry, I was wondering if there is a way to update this phone ( the k2cl ) to JB
idr666 said:
Sorry, I was wondering if there is a way to update this phone ( the k2cl ) to JB
Click to expand...
Click to collapse
Boost has no official jb, but i know that there is work for an custom jb rom for boost.
Oh, thank you for the info. Is there any link about this work in progress?
idr666 said:
Oh, thank you for the info. Is there any link about this work in progress?
Click to expand...
Click to collapse
Look here
szympro said:
There is information that it is impossible to change CID while on JB and with 2.0 hboot, but I guess that I have had success in changing to superCID (at least this is what I can read in bootloader and using fastboot oem readcid command.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Click to expand...
Click to collapse
old.splatterhand, you seem to know this and that about One SV. No chance for older RUU, right? I can't seem to find a clean WWE JB OTA update. I just want a clean, stock, not modified ROM from HTC and I thought RUU is the only way to go :crying: Any advices?
szympro said:
There is information that it is impossible to change CID while on JB and with 2.0 hboot,...
Click to expand...
Click to collapse
This was before moonshine was available. With S-Off i think it should be possible.
So, as far as I understand newer hboot won't let me use older RUU as well, right?
Click to expand...
Click to collapse
I think so.
szympro said:
old.splatterhand, you seem to know this and that about One SV. No chance for older RUU, right? I can't seem to find a clean WWE JB OTA update. I just want a clean, stock, not modified ROM from HTC and I thought RUU is the only way to go :crying: Any advices?
Click to expand...
Click to collapse
To get it a bit clearer.
At this point i'm not very up to date, thats why i didn't answer til now.
I think (but i'm not sure) you can flash the ruu, if you are on hboot 1.0.
And as you are S-Off you should be able to downgrade hboot. But this is a very risky point, you can easily brick your device. Here is, how you have to do:
rollon76 said:
To change hboot you will need a PL80IMG.zip on sdcard with android-info.txt and hboot.img inside it.
reboot to bootloader and flash.
Click to expand...
Click to collapse
The thing what makes it difficult, is to get the hboot.img (its inside ics ruu), cause the htc ruu's encrypted and i only have heard about tools for linux which can decrypt it.
Thanks to your reply I did some research and I have managed to do what I wanted. I have downgraded hboot first (by extracting and encrypting ICS RUU using linux), then I could run RUU and now I am stock ICS with S-off and superCID
Should I post some files from RUU? 1.0 hboot or stock recovery? You guys need something?
Thanks for your helping hand old.splatterhand!
szympro said:
Thanks to your reply I did some research and I have managed to do what I wanted. I have downgraded hboot first (by extracting and encrypting ICS RUU using linux), then I could run RUU and now I am stock ICS with S-off and superCID
Should I post some files from RUU? 1.0 hboot or stock recovery? You guys need something?
Thanks for your helping hand old.splatterhand!
Click to expand...
Click to collapse
Glad, it worked for you.
Yes, of course, everything is appreciated! You can use this thread, please post ruu name too. You can look at my posts there. Hboot, boot.img, recovery, radio, would be fine.
HERE have other ruu
https://www.dropbox.com/sh/1t2zswod7tc97az/5hbzEgTv80
szympro said:
I have downgraded hboot first (by extracting and encrypting ICS RUU using linux)
Click to expand...
Click to collapse
Wow, that's cool !
Did you use rollon's method and flashed PL80IMG.zip in bootloader mode ?
If yes, which android-info.txt did you use ?
If not, how did you do it ?
szympro said:
then I could run RUU and now I am stock ICS with S-off and superCID
Click to expand...
Click to collapse
Even cooler for you.
Did you get the ota update notification for JB then ?
Did you manage to apply it ?
Thanks and congratulations !
Hi everyone.
Just a quick message to confirm that rollon's method works.
To downgrade you need to be S-OFF, extract and decrypt (with ruuveal, using linux or a linux virtualbox runned in windows) hboot and androidinfo from ICS RUU, put them in a zip named PL80IMG.zip, put it on your sd card and boot into bootloader. Then you can run the ICS RUU normally and you'll be back to stock ICS, with a "*** LOCKED ***" bootloader (not relocked !), will be able to go back to S-ON using "fastboot oem writesecureflag 3" (thanks to JMZ)...
You'll then have a locked S-ON out of box phone running 100% stock ICS with original boot, recovery and all that... who'll get the 2 JB OTA's...
In case anyone's interested

[Q to EXP DEVs] S-on, cant do supercid, firmware 2.16 HELP

As the title says, im S-ON, firmware 2.16, cant get supercid to S-OFF and then run RUU. And im htc dev unlocked.
Before i got stuck with this, i had supercid following the steps posted in development section and then i S-OFF, but then i changed my cid to HTC__011 and S-OFF to S-ON. After that i couldnt revert it back to 11111111, i tried many roms, from maximushd to trickdroid (even tho im on 2.16 firmware from maximushd), and every time i change cid and boot in bootloader to check it, it always shows HTC__011 like its protected. I also tried locking my bootloader, but i couldnt flash RUU, i think its because of the firmware.
Now im stuck with s-on, firmware 2.16, htc cid which i cant change. So if someone knows, please help.... sorry for my english and Thanks!
i know im not answering your question, but source rom works with s-on
RichieRich84 said:
i know im not answering your question, but source rom works with s-on
Click to expand...
Click to collapse
Thanks anyway, but what do you mean by 'source' rom?
Aca902 said:
Thanks anyway, but what do you mean by 'source' rom?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2392465
I have a working rom, but i want to get back to stock.
im in the same situation as you @Aca902 i think now we need a riff box for solving this. you either need to buy one or find a phone repair shop that has one
RichieRich84 said:
i know im not answering your question, but source rom works with s-on
Click to expand...
Click to collapse
What version of source rom works on hboot 2.16?
cyberusman said:
What version of source rom works on hboot 2.16?
Click to expand...
Click to collapse
any since it is a stockish like rom for S4 model.
Source rom is stockish rom with stock boot.img, Im sure you could just Flash your stock backup or try to find one.
Aca902 said:
As the title says, im S-ON, firmware 2.16, cant get supercid to S-OFF and then run RUU. And im htc dev unlocked.
Before i got stuck with this, i had supercid following the steps posted in development section and then i S-OFF, but then i changed my cid to HTC__011 and S-OFF to S-ON. After that i couldnt revert it back to 11111111, i tried many roms, from maximushd to trickdroid (even tho im on 2.16 firmware from maximushd), and every time i change cid and boot in bootloader to check it, it always shows HTC__011 like its protected. I also tried locking my bootloader, but i couldnt flash RUU, i think its because of the firmware.
Now im stuck with s-on, firmware 2.16, htc cid which i cant change. So if someone knows, please help.... sorry for my english and Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=44801454#post44801454

[Q] Update to 4.4 ROM from 4.2 with old hboot

Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor. Currently service provider is Koodo - a division of Telus (in Canada).
CID: ROGER001
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
arjundas86 said:
Hi guys,
I am on an old JellyBAM ROM (7.7.0), based on CyanogenMod 10.1.0 (Android 4.2.2). I want to try KitKat roms (4.4.2) such as latest CM 11 nightlies etc. So I want to know what all I need to do to get my phone ready to install 4.4 roms.
Some background:
I unlocked my bootloader using HTC Dev Token ID method, installed CWM recovery, and flashed my current and past roms that way - it has been around a year since I made any updates to my phone. So I think some of my firmware is not current enough to support 4.4 roms.
I am S-ON.
My main concern is that I have hboot 1.08. All the guides I see talk about either hboot 2.15 or 2.16.
Recovery: CWM v5.8.3.1
Phone is carrier-free Ville S4 processor.
Radio: 0.16.31501S.02
From the reading that I did, what I understood is:
First I should S-OFF (to make things easier for any future playing around). I was thinking of using the Firewater S-OFF Tool (from http://www.androidpolice.com/2014/0...f-tool-will-unlock-any-htc-device-in-moments/)
I need to update my hboot. This is the step I am most worried about, as I have never flashed a RUU before, and that's what most guides say to do. This thread says to just run the JellyBean RUU [http://forum.xda-developers.com/showthread.php?t=2524306]. Would you say that's a pretty safe bet, or is that outdated advice/information?
Once I go S-OFF and update hboot to 2.15, can I just flash CWM (or TWRP) recovery, and flash CM 11 nightlies?
Thanks a lot!
Click to expand...
Click to collapse
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
LS.xD said:
Whats your CID?
You don't need to be S-OFF if theres a matching RUU for you BUT you cant install lower HBoot versions while you're S-ON. Flashing a custom recovery is also possible while you're S-ON
Click to expand...
Click to collapse
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
arjundas86 said:
I am not sure - I have never checked it before.
I ran CID Getter app, and it's supposed to show me CID in red at the top, but it shows nothing. Some of the app comments say that if the CID is not shown, it means I am SuperCID. I'm not sure about that.
I'm at work, but when I get home, I'll run the fastboot command to find out the CID. I didn't do anything intentionally to get SuperCID, so is it likely that I might be SuperCID? How would I know?
Click to expand...
Click to collapse
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
LS.xD said:
SuperCID = 11111111
Other CIDs are listed here: HTC CID LIST
You can easiliy read the CID with WinDroid Toolkit 2.0
Click to expand...
Click to collapse
Thanks for the toolkit.
cid: ROGER001
Btw, what's the purpose of going SuperCID?
Also, I don't want to install lower hboot. I am on hboot 1.08 and I think I need to install hboot 2.15. Right?
I guess S-OFF isn't absolutely necessary, but would be nice to have. Would you recommend using the S-OFF command from the toolkit you linked?
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
With superCID you can switch to other CIDs e.g. for unbranding your device Also it's needed for "Facepalm S-OFF" (Was the only working method for me)
Sent from my loved HTC One S using (most time buggy) Tapatalk
LS.xD said:
I Don't know which s-off Method is Best for your cid. Have you found matching RUU with hboot 2.15?
Sent from my loved HTC One S using (most time buggy) Tapatalk
Click to expand...
Click to collapse
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe​
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29​
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29​
I would appreciate any insights into what would be the applicable RUU?
Thanks.
arjundas86 said:
I have seen a few options for RUU, but not sure which one I should use. I don't quite understand the relationships between phone parameters and which RUU to get.
The guide that I linked to in my first post, that I was thinking of using says the following one: (but they don't know what my CID is)
RUU_Ville_U_JB_45_S_TMOUS_3.14.531.11_Radio_1.13.5 0.05.31_10.30.50.08L_release_309489_signed_ICS_2.exe​
Androidruu.com has several other RUUs. I guess since my CID says Rogers, I should use one of the Rogers ones?
RUU_Ville_U_Rogers_WWE_1.70.631.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254139_signed.exe - 2013-01-29
or
RUU_Ville_U_Rogers_WWE_1.84.631.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265373_signed.exe - 2013-04-29​
But my current provider is Koodo, which is a subdivision of Telus. So should I use one of the Telus RUUs?
RUU_Ville_U_TELUS_WWE_1.70.661.1_Radio_0.16.31501S.02_10.18.31501S.08L_release_254554_signed.exe - 2013-01-29
or
RUU_Ville_U_TELUS_WWE_1.84.661.9_Radio_0.17.31501S.10_2_10.27.31501S.10L_release_265367_signed.exe - 2013-04-29​
I would appreciate any insights into what would be the applicable RUU?
Thanks.
Click to expand...
Click to collapse
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
LS.xD said:
As long as you are S-ON you can only flash matching RUUs (Rogers). You will need to gain S-OFF to reach HBoot 2.15 as it seems.
Click to expand...
Click to collapse
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
arjundas86 said:
Okay. It seems that the best path forward for me is to S-OFF using the Firewater tool (since my device is HTCDEV unlocked/rooted, and having S-OFF means I won't need to unlock bootloader again after running RUU).
Then I'll run the newest Rogers RUU from AndroidRUU.
At this point, I should be on hboot 2.15 and still bootloader unlocked, right?
If I'm right about all that, then I should just have to install a custom recovery and be able to flash the 4.4 ROM I want. Correct?
Click to expand...
Click to collapse
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
LS.xD said:
Newest Rogers RUU ist HBoot 1.84 as it seems. Once you're S-OFF and have superCID you need to change your CID to unbranded (HTC__001) and flash e.g. unbranded RUU with HBoot 2.15.
Click to expand...
Click to collapse
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
arjundas86 said:
Hmm... I see. Things are getting clearer, but still a little confused about SuperCID stuff.
Will running Tmobile US RUU work? That's the one from the guide I read in my first post. He suggests that RUU to get hboot 2.15.
Once I get S-OFF, then I should get SuperCID. I thought with SuperCID (i.e. 11111111), I can run any RUU. Or should I still manually set CID to HTC__001 before running Tmobile US RUU?
Click to expand...
Click to collapse
To run a RUU NOT MATCHING your stock CID you need S-OFF // SuperCID. You cant install TMobile RUU at first :/
I would act like this:
Run latest Rogers RUU --> READ FACEPALM GUIDE CAREFULLY. There is how to gain SuperCID and then S-OFF. Once done you can change CID to whatever you want and run a (unbranded) RUU with HBoot 2.15.
But that is just what i thought about it. I suggest to let someone else CONFIRM the way suggested by me first.
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
@Rapier
thank you for the provided help as usual
Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
LS.xD said:
...Are there any advantages by unsing HBoot 1.06?? I'm on 2.15 // S-OFF // SuperCID // No red letters // "tampered" removed
Click to expand...
Click to collapse
For you? NO. You're better than me
The story is like this. I bought the phone in 2012. At that time, the highest hboot was 1.14 I believe (don't remember exactly) and there was no S-Off method available (they appeared later). There was something else tho. The lower hboots (1.09 and lower) permitted to write in the kernel partition or radio partition like an S-Off device. HTC then covered this in the higher hboots. So even if there was no S-Off method, there was a downgrade method that was used to downgrade the hboot from whatever you had to 1.09 or below. I downgraded mine to 1.06...don't ask why I didn't choose 1.09, I thought that was the RUU I considered to be fine for me at that time.
Now being on hboot 1.06 I can do anything except I cannot flash firmwares directly. So I cannot flash a new hboot with red letters removed for example. But I don't care about this...I can flash radios or kernels or splash screens like any S-Off user. The procedure for getting latest firmware and S-Off seems a little bit risky and I've read about alot of issues or problems from people who failed or tried countless times to reach that. So I've asked myself why should I do that if I don't need it?
Then it came the rumor and there were some brick cases of devices that were having some Android 4.3 ROMs and were not on latest firmware (in the meantime 2.13 and 2.15 hboots arise and also the S-Off method). It proved to be not the firmware fault after all. But CM team has included a check in the updater script of the ROM ZIP, to validate if the hboot was 2.13 or 2.15...if not, the flash won't happen. It's a simple assert command present there at the beginning of the script that do the check. As CM team was the pioneer in having the newest Android version ROMs available, everybody based initially their ROMs/builds on CM...so the check in the script was automatically carried over to all the ROMs out there. And it's still here.
As I've tested and I could run fine those ROM's (by removing the check before flash), I noticed that this requirement does not apply to everyone. Some could run fine the ROMs even if they're not on the "latest" firmware.
So that's why I am on 1.06...cause I don't know why should I go through some risky procedures when I don't need to.
Rapier said:
Have you tried anything yet? If NO. then STOP. Don't do anything and don't upgrade your firmware/hboot yet. It could happen you won't need this. I am on hboot 1.06 and I'm running fine any ROM including KitKat ones. That requirement for a higher firmware is coming from an old issue that was before with earlier Android versions (from the versions that used 3.4.x kernel and up), making SOME phones to misbehave (reboots or other issues). It could be that your phone handles it right and in that case you won't need to upgrade if you don't want to.
OK. All these being said, I would suggest you to first try to see if the ROM works OK on your phone like it is and only if it doesn't you should think about S-Off, upgrading firmware and things like this.
Now, what you have to do is download the ROM you would like...any ROM, and before flashing it follow my guide HERE to change the updater script in the ROM's ZIP to allow flashing the ROM on lower hboots. It is very easy, I do this usually in 1 min, I would suggest to use method 2 that's much easier than to follow all detailed steps in method 1. If you have any questions or unclear things ask but I think it's easy enough.
If after this you cannot boot the ROM or have it working, then you can think of upgrading firmware
Click to expand...
Click to collapse
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
Rapier said:
WHY? You should not only upgrade your firmware but also to S-Off. It is not required but it makes your life easier. And these procedures bear some risks even if they were successful for others. And why should you risk anything unless it's mandatory? The point is you have a hboot lower than 1.09. There are not to many left and people are tempted to forget, but hboot lower than 1.09 means you're like an S-Off. You can flash radios and kernels from recovery as on any other S-Off device. Only thing you can't do is to remove those red letters from the boot splash screen...that is you can't flash another firmware. But hopefully you might not need it.
Click to expand...
Click to collapse
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​But no, I haven't done anything yet. So first of all, I'll make a nandroid backup and then just try factory reset, wipe cache/dalvik, and flash a CM 11 ROM, and see if it works. I'll post here whether it worked or not, I won't have time to do this until the weekend though.
Thanks, btw.
I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
LS.xD said:
I beg to differ answering first:
Just try if you can install your preferred rom, AFTER you edited the "updatescript" as suggested by @Rapier.
Just IN CASE you have problems with the new rom you should get S-OFF + upgrading HBoot to 2.15+
Click to expand...
Click to collapse
Yes, you're right. That's what I meant. I will delete the updater-script lines that Rapier mentioned before trying to install CM11.
If it doesn't work, at least I can restore to my backup, without risk of bricking.
Then I can try the hboot update and s-off if required.
Thanks.
arjundas86 said:
I did read in more than one thread that you MUST have hboot 2.15 to install KitKat roms. Also, on CyanogenMod website, it says:
Firmware compatibility:
CM 10.1-11.0: HBOOT 2.13.0000, 2.15.0000, 2.15.4444.​...
Click to expand...
Click to collapse
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't want
arjundas86 said:
...I don't get what you're saying. It is still worth getting S-OFF, or it is not?
Click to expand...
Click to collapse
It's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
BUT, if you're NOT going to upgrade your firmware and you'll be lucky to have the ROM working, you won't need to S-Off since your current hboot is lower than 1.09 and allows you to flash radios and kernels directly from recovery.
And at this point, as you said, it worth a try like you are now and only if it's not working like this you should upgrade and do S-Off. I guess is much easier and less risky to remove 4 lines from that script and flash the ROM to see if it's working, than to go through the firmware upgrade & S-Off procedures
Rapier said:
Yes, they say so. Then I'm the living proof that this requirement is not true...sorry for that. I've explained above to LS.xD where this requirement came from. The point is that you might have the ROM working even if you're on 1.08 and in this case you won't need to upgrade if you don't wantIt's depending on what you want. If you want to get rid of that red warning, to have the latest hboot and to have less trouble when flashing ROMs then yes, it worth it. If you just want to upgrade your firmware to 2.15 (to match the ROM requirements) but do not want to make the S-Off, you will have to flash the kernel separately in fastboot mode, after each ROM flash. Also you won't be able to flash a radio. That's why I said that if you are going to upgrade the firmware you should get S-Off as well
Click to expand...
Click to collapse
Hey Rapier,
I'm having trouble doing getting the zip signed.
I tried the zip signer you had in your guide, as well as a bunch of other zip signing programs, but none of them seem to do the job. I keep getting Error: Status 7.
Not getting bootloops or anything like that, so I was able to restore to my backup. No harm done.

Categories

Resources