Related
Please place all of your discussions about obtaining root on the Evo Shift here.
Temp root:Temporary root can be acheived a number of ways on the shift the easiest being either z4root app or the visionary plus root app.
Z4root:
download here and install as you would any other apk
open the app and hit temporary root
let it run till you are notified of its success
you now have temporary root!!
*Note you have to reapply z4 each time you reboot your phone
Visionary:
full instructions and the link to visionary can be found here. http://android.modaco.com/content/h...m/320722/19-nov-r14-visionary-one-click-root/
IMPORTANT NOTE!
PLEASE DO NOT ACCEPT ANY OTA UPDATES!!!!!!!!!!!!!!!!!
they patched the root exploit on the desire z when they updated you can most definitely expect them to do the same for the shift so please for that sake of everybody being able to get proper root do not accept any updates unless further notified!!!
unless you just dont care about root that is.....
so far, we got a temporary root.
No point in trying unrevoked as it scans for the device name and shows
"sorry, the device 'speedy' is not suppored" (paraphrasing)
wish i knew alittle more about this.
You can get to hboot by Holding down the vol down while powering on
Also in a previous thread bubby323 requested a dump of /system and dnalevelc obliged:
* http://www.digglesworth.net/evoshift/system.7z
In another forum (androidcentral) someone noted that an app called VISIONary works to auto temp-root the Shift upon boot.
* http://android.modaco.com/content/h...m/320722/19-nov-r14-visionary-one-click-root/
Edit: Also there's code to temp root the G2 using a different exploit below. I haven't attempted to run it on my Shift. Possibly not relevant since it has a newer version but could be if an update is pushed to the Shift:
* https://github.com/tmzt/g2root-kmod/tree/scotty2/scotty2/psneuter
got the shift today. MAN this thing is fast! i'd love to see unrevoked release a small update that supports the shift. otherwise i can do it the long way but i can't wait to see the scores once i get a custom ROM on it.
Visonary does work, I turned on temproot on boot and then i pressed temproot now and it rebooted the phone. The phone was either taking its time or got stuck on the 4G for 2-3 mins so I pulled the battery and started the phone up again. I installed connectbot and typed su and got a #. Tried the reboot command and it wouldn't let me so I went into root explorer and it prompted the su app, gave it permission and started hacking away at bloatware..... no luck, it still came back from the grave :\
I successfully Temp rooted with z4root (http://forum.xda-developers.com/showthread.php?t=833953) and I couldnt get the download off the market so I just went to 4shared.com and searched z4root and picked up 1.3.0 which is the latest version....
It worked great and I used Titanium back up and a screen shot app that both needed root.
does anyone think the rageagainstthecage exploit will work on this? i assume people are working on it? cause if it does, that means unrevoked3 could possibly release a new version with shift support, right? since unrevoked is just an automated rageagainstthecage, right?
edit: i mean, for permanent root, S-OFF.
steven1022 said:
I successfully Temp rooted with z4root (http://forum.xda-developers.com/showthread.php?t=833953) and I couldnt get the download off the market so I just went to 4shared.com and searched z4root and picked up 1.3.0 which is the latest version....
It worked great and I used Titanium back up and a screen shot app that both needed root.
Click to expand...
Click to collapse
Z4Root temp root was a success but SU is telling me to upgrade by going into recovery, How do I go about this? I can't get any permissions for Rom Manager, Titanium, BusyBox, Etc...
rhodiggah said:
Z4Root temp root was a success but SU is telling me to upgrade by going into recovery, How do I go about this? I can't get any permissions for Rom Manager, Titanium, BusyBox, Etc...
Click to expand...
Click to collapse
Nevermind, figured it out. I accidentally rebooted, therefore, I lost root...
yokken said:
does anyone think the rageagainstthecage exploit will work on this? i assume people are working on it? cause if it does, that means unrevoked3 could possibly release a new version with shift support, right? since unrevoked is just an automated rageagainstthecage, right?
edit: i mean, for permanent root, S-OFF.
Click to expand...
Click to collapse
yes, the rage exploit is what works and is what z4root uses. However I couldn't get the actual binary to work from the CLI using adb.
Just curious--with this temp root, will the wireless tether app work? At least until the phone is restarted. I use that app quite a bit with my Hero, to get on the sites blocked at work on my ipad
tatonka_hero said:
Just curious--with this temp root, will the wireless tether app work? At least until the phone is restarted. I use that app quite a bit with my Hero, to get on the sites blocked at work on my ipad
Click to expand...
Click to collapse
yes as reported by others i dont have yet but want...
http://twitter.com/unrevoked/status/24492360310198272#
riggsandroid said:
http://twitter.com/unrevoked/status/24492360310198272#
Click to expand...
Click to collapse
blocked at work (thus the wifi tether needed )
what's it say? lol
Yes we finally got a forum
But on to the good stuff and not so good stuff
Even though we only have temp root partitions on the shift can be flashed using dd I won't go into exactly how to do it till I get home because the commands have to be EXACT!!!! Or u risk bricking your phone... I've had to ruu a couple times now
O btw the ruu that was previously leaked appears to be exactly what was released on the shift.
Sent from my PG06100 using Tapatalk
"Maybe good news for people with the HTC Wildfire. We're looking at it. (Also maybe good news for people with Evo Shift 4G sooner or later.)"
Here is a link to the thread with the leaked RUU if anyone needs it
linky
BrandoKC said:
Here is a link to the thread with the leaked RUU if anyone needs it
linky
Click to expand...
Click to collapse
has this been tested? is this the stock RUU that ships with the phone? can it be flashed no problems to return to factory if i mess something up with root? (like remove an application that is integral to the OS or to sense or something)
StAlphonso said:
has this been tested? is this the stock RUU that ships with the phone? can it be flashed no problems to return to factory if i mess something up with root? (like remove an application that is integral to the OS or to sense or something)
Click to expand...
Click to collapse
Take a look at bcnice's post two above mine
riggsandroid said:
http://twitter.com/unrevoked/status/24492360310198272#
Click to expand...
Click to collapse
Great tip. It's just a matter of time now...
Dani897 has already made a discussion of this, but I'm moving this information over as an official post in the Infuse 4G section as well.
This is from existz/untermensch's thread. I take no credit. See here for more info http://forum.xda-developers.com/showthread.php?t=909213
Making this modification will allow you to flash un-signed .zip files due to signature verification being turned off. (3e requires root)
* Download and extract the .zip
* Use a terminal emulator or ADB Shell and mount system as read/write.
* For backup purposes, use adb or root explorer to rename the current recovery file in /system/bin to recovery.orig
* Use a file manager (Root Explorer) and copy the new recovery file to /system/bin
* Reboot and your 3e (Froyo stock) recovery will no longer require signature checking.
You can now use this recovery or use the CWM from Captivate (posted in another thread here).
I am not responsible if this bricks your phone. This is easy cheese...just follow these steps.
Download:
3e Recovery w/o signature verification
Youtube video using Root Explorer from gtg465x (Make sure to Thank him!!)
You actually tested this on an Infuse?
DarkH2O said:
You actually tested this on an Infuse?
Click to expand...
Click to collapse
Yes. it is working on mine right now.
i already tested this days ago and cwm
except using truselos super easy batch script to make it even more easy for people to use.
http://forum.xda-developers.com/showthread.php?t=1086622
still there is disbelief. yes people it works! im not sure what trouble people are having flahsing roms but cwm and 3e can flash .zip files just fine. i expected to see some flashable mods and themes by now. i have successfully flashed files for testing purposes and im not too advanced of a user. i planed to post some things like a market fix and such but i have been disrtacted.
Dani897 said:
i already tested this days ago and cwm
except using truselos super easy batch script to make it even more easy for people to use.
http://forum.xda-developers.com/showthread.php?t=1086622
still there is disbelief. yes people it works! im not sure what trouble people are having flahsing roms but cwm and 3e can flash .zip files just fine. i expected to see some flashable mods and themes by now. i have successfully flashed files for testing purposes and im not too advanced of a user. i planed to post some things like a market fix and such but i have been disrtacted.
Click to expand...
Click to collapse
Dani, i completely agree. If you notice, I made mention of your testing at the top of the article.
Now that there is a dedicated thread, its much more likely to be realized that this works FINE. I think once I get a tester for the Odin package I slapped together to get us back to stock in case we brick, and get it successfully setup, i'll put a thread out and we can REALLY get to work on some ROMs.
So far, this phone's software is nearly identical to the Captivate, meaning we will just need to port from the Captivate and we will have a mass of ROMs in no time!
h8rift said:
Dani, i completely agree. If you notice, I made mention of your testing at the top of the article.
Now that there is a dedicated thread, its much more likely to be realized that this works FINE. I think once I get a tester for the Odin package I slapped together to get us back to stock in case we brick, and get it successfully setup, i'll put a thread out and we can REALLY get to work on some ROMs.
So far, this phone's software is nearly identical to the Captivate, meaning we will just need to port from the Captivate and we will have a mass of ROMs in no time!
Click to expand...
Click to collapse
as soon as we get some kernel dev on this thing i agree. porting will be easy. thanks for the write ups too. are you planning to get a second phone? i would test if i had two of them. my captivate will go to my brother, if it weren't for that id have probably bricked it and begged some people to try making new odin packages for me to fix it.
i understand that after a brick the user hates not having the phone and may be very tempted to return it but it is helpful to everyone to try all you can to recover it. if mine bricks im using the insureance plan and saying it was stolen, then i will have a dedicated test phone.
I have an Atrix as well, but would prefer someone who may have already bricked to try this package that i wrote up this morning.
I dont mind someone wanting to swap.their phone...but i literally need about an hour or two of time with the brick's user and its very likely that we will have working Odin....and then you and i...as well as others... can do kernel and rom deving nearly immediately. We have source already, so we only need to test this safety net . PM me if you find someone who is bricked or is willing to test!!
-h8
Dani897 said:
as soon as we get some kernel dev on this thing i agree. porting will be easy. thanks for the write ups too. are you planning to get a second phone? i would test if i had two of them. my captivate will go to my brother, if it weren't for that id have probably bricked it and begged some people to try making new odin packages for me to fix it.
i understand that after a brick the user hates not having the phone and may be very tempted to return it but it is helpful to everyone to try all you can to recover it. if mine bricks im using the insureance plan and saying it was stolen, then i will have a dedicated test phone.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using XDA App
I have a bricked Infuse im not sure what caused the crash. I was running stock rooted by the super one click method and was uninstalling an app when it went all black except the bottom keys. Doesnt do much of anything else now. I attempted an odin fix someone suggested to no avail. I can get into download mode still but nothing else. Id be willing to try anything to unbrick it .
it's working for me, I unzipped, put the file in my dropbox, downloaded the file on phone from dropbox, used root explorer to mount, (I'm already rooted) copied the file, went to system/bin, renamed the original, then pasted the new file, rebooted, flashed CWM to captivate, and rebooted into recovery, and it works. I still have my HTC Inspire, i'm on a 30 day run here to see if i like the infuse. So far it's the best GPS i've had, and i've had a lot of phones. I hate to think I spent 600 bucks on a another captivate. I had that phone as well, but so far i really like it.
Realityfalse said:
I have a bricked Infuse im not sure what caused the crash. I was running stock rooted by the super one click method and was uninstalling an app when it went all black except the bottom keys. Doesnt do much of anything else now. I attempted an odin fix someone suggested to no avail. I can get into download mode still but nothing else. Id be willing to try anything to unbrick it .
Click to expand...
Click to collapse
if you can get into download mode I personally would try running the captivate odin and see what happens, buts that's just me lol. I'm a risk taker lol.
What commands do you use in ADB to mount system as read/write?
budco2000 said:
if you can get into download mode I personally would try running the captivate odin and see what happens, buts that's just me lol. I'm a risk taker lol.
Click to expand...
Click to collapse
dont do that. you dont want the captivate param.ifs on here. you may loose download mode if the boot parameters get messed up. especially dont flash anything with bootloaders, that means no one click nad no 3-button fix roms. this may be similar to the galaxy s but there are atleast a few differences in hardware layout that would make that a bad idea. for instance this can run gps and camera during phone calls. the sgs cant so the way things comunicate on the board may be differet, it may also just be differences in the kernel or framework but we cant be sure.
Dani897 said:
dont do that. you dont want the captivate param.ifs on here. you may loose download mode if the boot parameters get messed up. especially dont flash anything with bootloaders, that means no one click nad no 3-button fix roms. this may be similar to the galaxy s but there are atleast a few differences in hardware layout that would make that a bad idea. for instance this can run gps and camera during phone calls. the sgs cant so the way things comunicate on the board may be differet, it may also just be differences in the kernel or framework but we cant be sure.
Click to expand...
Click to collapse
Yes. DO NOT DO that.
BTW, I just had a successful Odin flash with beatblaster! His framework-res was broken, and he flashed all stock partitions successfully. Hope to be posting it up to the masses in about an hour; After he does some initial checks now that he's back to stock to make sure everything is 100%!
Let's get this party started ....stay tuned!
h8rift said:
Yes. DO NOT DO that.
BTW, I just had a successful Odin flash with beatblaster! His framework-res was broken, and he flashed all stock partitions successfully. Hope to be posting it up to the masses in about an hour; After he does some initial checks now that he's back to stock to make sure everything is 100%!
Let's get this party started ....stay tuned!
Click to expand...
Click to collapse
yaaay
ok now we can get all crazy with few worries. good to hear!
Dani897 said:
yaaay
ok now we can get all crazy with few worries. good to hear!
Click to expand...
Click to collapse
Yes. That's a major hurdle.
h8rift said:
Yes. DO NOT DO that.
BTW, I just had a successful Odin flash with beatblaster! His framework-res was broken, and he flashed all stock partitions successfully. Hope to be posting it up to the masses in about an hour; After he does some initial checks now that he's back to stock to make sure everything is 100%!
Let's get this party started ....stay tuned!
Click to expand...
Click to collapse
Sweet! So the dump was good then it sounds like. So just to sum it all up, odin the pda tar and it restores and wipes EVERYTHING!
Woops! AND DEODEXED!!?!?
I'm pretty new to all of this, but here is how I did it. Make sure you have busybox installed!
Extract the "recovery" file to your phone's internal SD card.
On your phone, go into your terminal emulator.
Type in "su" and press enter.
Type in "cd /sdcard" and press enter.
Type in "mount -o rw,remount /dev/block/stl9 /system"
Type in "cp -f recovery /system/bin" and press enter.
Reboot your phone.
Maybe this will help someone. Maybe it's not even the right way to do this, and my phone will soon explode. I'm a pretty big noob with this, so someone let me know.
PS: If you brick your phone, it isn't my fault.
Hi I came from iPhone 4 and like 2days owning this infuse, I am trying to follow gtg465x to install his ROM, I am done with the rooting and his next step is to "install 3e recovery" now that I am here I am totally lost, I downloaded the file here my Questions are:
1.where do I extract the zip I donwloaded from here? From the SD card root?
2. What thing will I use Terminal emulator or ADB SHELL to make it read/write is that 2 an Android apps I'm lost here. I am trying to be careful, I searched and found too much post and way different doing this. So now I am confuse.
Can anybody tell me how it install 3e recovery the easy and idiot proof way, like I said I am new to android I really have no idea about everything, and most of them too are initial I don't even know what the initials means. Anyone? Thanks
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
spirikitik said:
Hi I came from iPhone 4 and like 2days owning this infuse, I am trying to follow gtg465x to install his ROM, I am done with the rooting and his next step is to "install 3e recovery" now that I am here I am totally lost, I downloaded the file here my Questions are:
1.where do I extract the zip I donwloaded from here? From the SD card root?
2. What thing will I use Terminal emulator or ADB SHELL to make it read/write is that 2 an Android apps I'm lost here. I am trying to be careful, I searched and found too much post and way different doing this. So now I am confuse.
Can anybody tell me how it install 3e recovery the easy and idiot proof way, like I said I am new to android I really have no idea about everything, and most of them too are initial I don't even know what the initials means. Anyone? Thanks
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
I came from an iphone as well, about 2 weeks ago. I used the method posted in my previous reply. It worked for me, and has been doing fine so far. One thing you must do is make sure busybox is installed before you try it though. If you dont have busybox installed, none of the commands will work. Then just download "Terminal Emulator" from the market, and use that to give commands.
Sent from my SAMSUNG-SGH-I997 using XDA App
Cohdee said:
I came from an iphone as well, about 2 weeks ago. I used the method posted in my previous reply. It worked for me, and has been doing fine so far. One thing you must do is make sure busybox is installed before you try it though. If you dont have busybox installed, none of the commands will work. Then just download "Terminal Emulator" from the market, and use that to give commands.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
What command? I really have no idea, can you give me step by step if you don't mind?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Hey everyone, I followed instructions on flashing the CWM recovery by using root explorer and then flashing the update.zip, i've seem to run into a brick wall here. I booted into recovery 3e the samsung stock recovery that came with my SGS4G then i reinstall update, it continues until it cant verify the signature on the zip file... im stuck! Am i doing something wrong?
roadrunnerrd3 said:
Hey everyone, I followed instructions on flashing the CWM recovery by using root explorer and then flashing the update.zip, i've seem to run into a brick wall here. I booted into recovery 3e the samsung stock recovery that came with my SGS4G then i reinstall update, it continues until it cant verify the signature on the zip file... im stuck! Am i doing something wrong?
Click to expand...
Click to collapse
Sounds like a corrupt download. Redownload and make sure you push the recovery to the right place and the update.zip is at the root of your SDcard.
Also please keep all questions in the "general" section.
Sent from my SGH-T959V using XDA Premium App
Yupper.....signature verification errors are always 1 of 2 things:
1) not properly signed
2) corrupt download
Just for future reference.
sent from the pits of hell (from an sgs4g)
Thank for the fast reply! I downloaded the zip 3 times already lol, and i know i have root because i used rage to exploit and i've overwritten the recovery in /system/bin with superuser permission using root explorer as explained in the thread... would it make a difference if i pushed it via adb? i was unable to push due to adb recognizing as read only so i opted for the root explorer.
Push the recovery?
sent from the pits of hell (from an sgs4g)
"Recovery" as in the binary modification required for cwm is what I meant, not cwm itself
If you want to push it you need to be in root in adb. Should make a difference though. I did it with root explorer.
sent from the pits of hell (from an sgs4g)
That's what i thought.... hmmmm and i did have my shell root on but i was still unable to push files, but still it shouldnt have mattered what method i chose to overwrite the binary with, as long as it was successful (supposedly)
mad_fitter said:
If you want to push it you need to be in root in adb. Should make a difference though. I did it with root explorer.
sent from the pits of hell (from an sgs4g)
Click to expand...
Click to collapse
+1.
~Root explorer
~change permission on system/bin/replace recovery.img
~Put update.zip onrood of sdcard and `reinstal package`.
Sent from my SGH-T959V using XDA Premium App
silverspoon80 - when you refer to change permission you mean superuser correct?because i have followed that exact guide to the point... still no avail... i sware this makes the ion rooting and flashing look like small time lol!
roadrunnerrd3 said:
silverspoon80 - when you refer to change permission you mean superuser correct?because i have followed that exact guide to the point... still no avail... i sware this makes the ion rooting and flashing look like small time lol!
Click to expand...
Click to collapse
no. i'm talking about the 'Mount R/W' button on Root Explorer. That's what lets you replace the recovery that's already in your system/bin/ with the one that drhonk posted - or you get 'permisson denied' error.
*facepalm... i'm going to try it again THIS TIME w/mount, i'll get back to ya in a few. kudos for the input it's appreciated!
roadrunnerrd3 said:
*facepalm... i'm going to try it again THIS TIME w/mount, i'll get back to ya in a few. kudos for the input it's appreciated!
Click to expand...
Click to collapse
anytime, keep us updated
You Sir are a true saint! In these dark hours of frustration... i overlooked something that stared me straight in the eye! Double thumbs up, I can't thank you enough!
roadrunnerrd3 said:
You Sir are a true saint! In these dark hours of frustration... i overlooked something that stared me straight in the eye! Double thumbs up, I can't thank you enough!
Click to expand...
Click to collapse
you can press the 'thanks' button - and you're welcome
OH NO! i'm afraid we have a far more serious issue at hand now.... i cant enter recovery anymore and my galaxy is stuck at the splash screen!
silverspoon80 said:
+1.
~Root explorer
~change permission on system/bin/replace recovery.img
~Put update.zip onrood of sdcard and `reinstal package`.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I had CWM (Krylon’s Version) working in a previous install of KD1 from Kies upgrade. Then I hosed my upgrade to BFrost ROM. I have Odened back to Whawks KD1 this the second time just in case it did not take on the first try. Both times I cannot get CWM to go in recovery. I have replaced system/bin/ recovery from a fresh download and placed update.zip on the root of Ext SD. I know recovery was over written properly because the date changed and Root explorer did not error out. I even restarted the phone 3 times to make sure it set. When I go to recovery and select ‘Reinstall Packages” I’m getting :
E: Can’t Mount /Dev/Block/mmcblk0p1
E: Can’t Mount SDCARD:Update.zip
It makes it sound like Recovery file is not taking. I did not have this problem with my original KD1 install before I hosed the system. Any thoughts?? I’ve tried many times with same result.
^ i just installed bfrost.... im now completely sponged and have to start from scratch using odin ahhhhhhhhhhhhhhhhhhhhhhhh one issue after another! I STILL LOVE THIS PHONE THOUGH! Sorry i cant be of much help im seriously lacking knowledge in the galaxy
roadrunnerrd3 said:
^ i just installed bfrost.... im now completely sponged and have to start from scratch using odin ahhhhhhhhhhhhhhhhhhhhhhhh one issue after another! I STILL LOVE THIS PHONE THOUGH! Sorry i cant be of much help im seriously lacking knowledge in the galaxy
Click to expand...
Click to collapse
I'm thinking it's a rights issue. This Rom has given me a couple FC's. One of them with SU so I may have a flaky SU. What's weard is that I know I changed the recovery file. That was the error I was getting when I frist tried installing it last month until I replaced the Recovery file.
roadrunnerrd3 said:
silverspoon80 - when you refer to change permission you mean superuser correct?because i have followed that exact guide to the point... still no avail... i sware this makes the ion rooting and flashing look like small time lol!
Click to expand...
Click to collapse
not in superuser. you need to change permission in the program your using to replace the recovery file since its a system file
I'm just starting to learn how to do all this...
I have CWM 5.8.4.0 installed, UCLD2 and Superuser 3.0.7
I've lost root access and can't figure out how to get it back. I've been searching the forum but can't quite seem to find what I need. I went through the process for rooting and no good result. I thought maybe I should just do a recovery back to 2.3.6 in CWM and it says the MD5 mismatch. I thought I had a solid backup for my original phone all this time. I restored it once through ROM manager and it worked great. I did a factory reset and went through the rooting process again and still nothing.
What my goal is, is to flash to a ROM that people are liking and that performs well. Was going to try SKYICS 4.2E, but I don't think I should attempt anything until I figure out how to go to a backup consistently. I could back up what I have now, which gives me a working phone, but I don't really like it. Most of my apps don't work correctly on it. What I really don't want to do is go forward again and really have it jacked up and not be able to go to a previous backup.
Where should I start? I'm guessing getting root access again. I'm assuming I won't be able to flash another ROM until I get this.
Thanks for the help!
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
jordan9812 said:
Just go read the faxes then after hours of that restore to stock and read the rooting guide good luck
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Okay funny guy... What was my first line again??? lol
I don't even know how to get back to stock. I can do that even if I don't have root access? I'm just trying to learn the mechanics of all this. Learn what does what... CWM is a means to write to the phone from boot. Can install different ROMs and parts of ROMS, ie. lock screens... Then there's kernels that operate the hardware that have to be compatible with the ROM. People talk about way more than I can comprehend at this point; it's one step at a time for learning.
So---first step is what? Read for hours? I don't understand what I'm reading. haha
32dave said:
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
Click to expand...
Click to collapse
What was the very first line in my post? lol
I'm not a programmer, but have taken some Java classes.
I don't know how to use scripts at all. In my mind, I can't do anything until I get root access. I'm not sure what the MD5 mismatch means either. I'm definitely reading things, but it seems that either I'm not understanding or that it's a tangent and not really related to what I'm trying to do...
You don't need root access. All you need is cwm to flash roms, kernels and radios
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I'm starting to figure that out. This stuff isn't very simple. It seems like it is, but for some reason it's just not. It's like a tractor pull. The more I learn the harder it gets to learn more because the crap gets too deep!
CodeRedDewd said:
I'm starting to figure that out. This stuff isn't very simple. It seems like it is, but for some reason it's just not. It's like a tractor pull. The more I learn the harder it gets to learn more because the crap gets too deep!
Click to expand...
Click to collapse
read the n00b posts and stickies, its really not that hard, all roms r rooted..meaning u dont have to root, u can do root ur self for stock firmware, the hard part(not really hard) is flashing cwm(clockworkmod recovery) via odin, once u do that flash a rom according to the rom u want to use, read this on howto root and flash cwm using odin http://forum.xda-developers.com/showthread.php?t=1340526
to go back to stock is very easy also via odin, read this link on howto http://forum.xda-developers.com/showthread.php?t=1652398
once u find a rom read all about that rom on how to flash it and any trouble shooting
clockworkmod recovery replaces the stock recovery so u can do wonderful things to our phones, it's this application that installs(flashes) the roms
Thanks for the info... I installed another ROM that I liked better, SKYICS without the root. I wanted to tweek something else and I cannot do it unless I get root access. Using Odin is pretty easy like you said and CW recovery. The first link you posted is the one I originally followed and it was rooted. I went through the process again and no root. Titanium just says sorry I don't have permission. I did a factory reset and tried to root again and nothing. I'm not sure where to go from here to get the root back....
If you flash a custom ROM they are already rooted
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I don't have root access. I did have it, but lost it when I installed ICS 4.0.4.
Titanium is saying it can't do anything... I just checked and now it's working. I didn't change anything. That's weird. It asked me for permission and is now in the superuser list. I couldn't get anything to do that for a few days. I'll just have to say Okay and move on. lol
CodeRedDewd said:
I don't have root access. I did have it, but lost it when I installed ICS 4.0.4.
Titanium is saying it can't do anything... I just checked and now it's working. I didn't change anything. That's weird. It asked me for permission and is now in the superuser list. I couldn't get anything to do that for a few days. I'll just have to say Okay and move on. lol
Click to expand...
Click to collapse
thats why i said when u use a rom "once u find a rom read all about that rom on how to flash it and any trouble shooting", its usually a bad flash, if reflashing doesnt work then redownload the rom and again and flash
u could of flashed superuser, but the problem was the rom didnt install properly......good u got it solved
32dave said:
I was having that problem too, I used this script "su_ics_v3.1_updated_wraithdu_installer" also install and run busybox if you haven't already or just flash an insecure kernel (make sure its right for your rom)
Click to expand...
Click to collapse
Can you be more specific on rooting 4.0.4? I didn't like SKY ICS and installed Embryo. It's much faster than the other, but now I don't have root again. I don't know how I got root access to SKY ICS, because when I asked I didn't have root, but 2 days later I suddenly had the access and did nothing.
I'm browsing around trying to find how people root 4.0.4...
CodeRedDewd said:
I'm browsing around trying to find how people root 4.0.4...
Click to expand...
Click to collapse
I used the 1st 3 steps for my ULCE2 [GUIDE]{ROOT}How To Root The ICS Leak
pc103 said:
I used the 1st 3 steps for my ULCE2 [GUIDE]{ROOT}How To Root The ICS Leak
Click to expand...
Click to collapse
That's exactly what I did and it's not working. I'm using CWM touch and tried 2 different superuser files I've found and nothing. BusyBox won't install because it says it doesn't have permission and I can't mount the drive in the phone with a file explorer because it's not rooted.
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted? I can't figure those things out....
I've even started all over and flashed the UCLE2 again, cleared all data. then installed Embryo, CWM then superuser. No luck. I'm at a loss here.
Update: I have tried these superuser files.
Superuser, Superuser-3.0.7-d-signed and Superuser-3.0.7-efghi-signed. The last one gave me root access for 4.0.4. I'll attach the file for others.
CodeRedDewd said:
That's exactly what I did and it's not working. I'm using CWM touch and tried 2 different superuser files I've found and nothing. BusyBox won't install because it says it doesn't have permission and I can't mount the drive in the phone with a file explorer because it's not rooted.
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted? I can't figure those things out....
I've even started all over and flashed the UCLE2 again, cleared all data. then installed Embryo, CWM then superuser. No luck. I'm at a loss here.
Update: I have tried these superuser files.
Superuser, Superuser-3.0.7-d-signed and Superuser-3.0.7-efghi-signed. The last one gave me root access for 4.0.4. I'll attach the file for others.
Click to expand...
Click to collapse
This superuser zip gave root access where other versions did not for 4.0.4.
CodeRedDewd said:
That's exactly what I did and it's not working. ...
I read somewhere that I may need to install an "insecure kernel", or maybe a ROM that is already rooted?....
I've even started all over and ...I'm at a loss here..
Click to expand...
Click to collapse
(See below)
CodeRedDewd said:
This superuser zip gave root access where other versions did not for 4.0.4.
Click to expand...
Click to collapse
...which is why we're focused on the one method with its 3 or 4 steps we linked. [Confession] My bad, I forgot to mention as is often covered in the threads - CWM flashing the zip took me a few (4) retries. I only backed up as far as 'select update from sdcard' for each retry, all within the same recovery session. Maybe this will help?
pc103 said:
(See below)
...which is why we're focused on the one method with its 3 or 4 steps we linked. [Confession] My bad, I forgot to mention as is often covered in the threads - CWM flashing the zip took me a few (4) retries. I only backed up as far as 'select update from sdcard' for each retry, all within the same recovery session. Maybe this will help?
Click to expand...
Click to collapse
It wasn't the steps ther were wrong. It was superuser that was wrong. I tried and tried with 2 different ones and nothing. Then I found another version that worked on the first attempt. The versions I tried first worked on 2.3.5, but not on 4.0.4.
I'm attaching the one I found that worked the first time. I tried the others about 20 times each and nothing, but they worked before. I haven't read anywhere that there are different versions of superuser that only root certain builds. I found it out the hard way.
If i can remember "SOME" superuser zips need to be flashed a few times before they flash successfully.
Sent from my SAMSUNG-SGH-I727 using XDA
jyazzie110 said:
If i can remember "SOME" superuser zips need to be flashed a few times before they flash successfully.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Thanks. I have read that, and that it works sometimes when it says it fails. The problem was that there are a few versions of superuser. I had two that worked on previous versions of android, like 2.3.6, but they won't work on 4.0.4. I found a different one named. "Superuser-3.0.7-efghi-signed" that worked first time. I tried the others more than enough. They don't work on 4.0.4. It's funny no one has mentioned this before.
Let's be clear.
I am glad you reached this goal CodeRed. Enjoy!
CodeRedDewd said:
...It wasn't the steps that were wrong....The problem was that there are a few versions of superuser.
Click to expand...
Click to collapse
Yes, but there was only one version in the [GUIDE]{ROOT}How To Root The ICS Leak.
CodeRedDewd said:
I had two that worked on previous versions of android, like 2.3.6, but they won't work on 4.0.4. I found a different one named. "Superuser-3.0.7-efghi-signed" that worked first time. I tried the others more than enough. They don't work on 4.0.4. It's funny no one has mentioned this before.
Click to expand...
Click to collapse
I had the older zip too, but it was all properly instructed in our [Dev] thread. Copperhed posted 'This will root 2.3.5 or 2.3.6' for an earlier Superuser.zip last November, linked in InSaiyanone's excellent all-in-one guide.
Needing to root 4.0.4 would lead us to the next stickie, where projeqht linked
Starskyrob's 'Step 2: Flash Attached zip from recovery.' in his [GUIDE]{ROOT}How To Root The ICS Leak, posted March 28th, referring to the zip you and I succeeded with. I think anyone reading the stickies should find the same guidance.
Okay, So I just rooted and unlocked the bootloader on my Verizon Galaxy S III and tried to flash Cyanogenmod 10 (the latest on on rom manager) and its now stuck on the boot animation. I created a backup before I did this through rommanager but when I try to utilize it, it says the file is empty. HELP PLEASE!! :crying:
Rom Manager strikes again. lol Odin back to stock and start over.
jljones06 said:
Okay, So I just rooted and unlocked the bootloader on my Verizon Galaxy S III and tried to flash Cyanogenmod 10 (the latest on on rom manager) and its now stuck on the boot animation. I created a backup before I did this through rommanager but when I try to utilize it, it says the file is empty. HELP PLEASE!! :crying:
Click to expand...
Click to collapse
I have used it a couple of years ago on my galaxy s fascinate but i forgot how to use odin. Any download links and tutorials you know of? Thanks again
Pulled link from other noob. Yall on a roll today. LOL
http://forum.xda-developers.com/showthread.php?t=1762709
If everything you need not in that section read the rest of Droidstyle's thread.
prdog1 said:
Pulled link from other noob. Yall on a roll today. LOL
http://forum.xda-developers.com/showthread.php?t=1762709
If everything you need not in that section read the rest of Droidstyle's thread.
Click to expand...
Click to collapse
What's wrong with RomManager? Screwing everything up.
Anayalata said:
What's wrong with RomManager? Screwing everything up.
Click to expand...
Click to collapse
You should always be sure to check the total size of the backup file before continuing with low level flashing. With the SGS III CWM has been notorious for not working properly with recovery processes. I switched over to TWRP after my dilemma with CWM.
So yeah, ODIN back to stock and start over.
Be thankful you only have a bootloop and not a total brick.
tekrhino said:
You should always be sure to check the total size of the backup file before continuing with low level flashing. With the SGS III CWM has been notorious for not working properly with recovery processes. I switched over to TWRP after my dilemma with CWM.
So yeah, ODIN back to stock and start over.
Be thankful you only have a bootloop and not a total brick.
Click to expand...
Click to collapse
Well I ended up reflashing the stock rom last night then tried to unlock bootloader again and when I started the ez unlock app it said my phone didnt have root access. So I rooted again the same way I did the first time and now when I try to launch the app it just sits there with a white screen. So then I downloaded a rootchecker app from the market and it says I dont have root access which is probably why the EZ_Unlock app isnt working properly. Thoughts?
jljones06 said:
Well I ended up reflashing the stock rom last night then tried to unlock bootloader again and when I started the ez unlock app it said my phone didnt have root access. So I rooted again the same way I did the first time and now when I try to launch the app it just sits there with a white screen. So then I downloaded a rootchecker app from the market and it says I dont have root access which is probably why the EZ_Unlock app isnt working properly. Thoughts?
Click to expand...
Click to collapse
Open up superuser and update the binaries
Sent from my S3 running Eclipse 2.1
kintwofan said:
Open up superuser and update the binaries
Sent from my S3 running Eclipse 2.1
Click to expand...
Click to collapse
That worked! So now that I've pretty much back to step one, is there anything I should watch out for while trying to flash another ROM? Maybe any ROM suggestions? Thanks
Just flash the ROM yourself in recovery, don't count on RM.
apacseven said:
Just flash the ROM yourself in recovery, don't count on RM.
Click to expand...
Click to collapse
Ill for sure keep that in mind.
Once you get on CM10 their built in updater works pretty well. I haven't heard anyone complain except for the fact it doesn't do an autobackup for you, it just dirty flashes it.