[Q] [HELP!!] stuck at RED CWM!! - Samsung Infuse 4G

hey alll,
i was running the latest Infused ROM until i decided to play around.
I backed up the current ROM using Red CWM,
then flashed DlevRom Infuse edition which worked flawlessly.
Then i decided to try MIUI Rom, and i also succeeded.
I didn't like MIUI, so I decided to "restore" my backup.
Now.. I had restored previously many times so I thought I knew what I was doing..(apparently not, cuz I'm stuck at Red CWM now..)
So I went into recovery, i think it was blue... so i remembered from my restore to infused from CM7 that I needed to be in the same recovery as the one I made the back up with. So I rebooted into MIUI, installed SGS Kernal Flasher, and flashed Bedwa's latest kernel which I was running with Infused.
So I booted into recovery, and had my Red CWM up. so i tried restoring...
here's the full CWM code(word choice?)
Checking MD5 sums...
Restoring system...
Restoring data...
E: Can't mount /dev/block/mmcblk0p2
(File exists)
Error mounting /data/!
Skipping format...
E:Can't mount /dev/block/mmcblk0p2
(File exists)
Can't mound /data/!
and with this i'm at the Red CWM Menu...
Where did I go wrong? How do I successfully restore? I never ran into this problem before...
Please help!!! =( =( =(
Edit: I was desperate so I disabled voodoo lagfix from CWM menu and rebooted ... I heard the robot voice saying now it's disabled....and I'm still stuck in bootloop..
please help me get it back to a working state =(((

Use ags kernel flasher and flash the cwm community kernel to get red cwm back. You can't restore or flash other Rom's from blue. Witch you pointed out you were in red. Try mounting system/data then restore
Sent from my SGH-I997 using XDA App

LG_iiNsTiiNcT said:
Use ags kernel flasher and flash the cwm community kernel to get red cwm back. You can't restore or flash other Rom's from blue. Witch you pointed out you were in red. Try mounting system/data then restore
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
yes, i flashed bedwa's kernel which got me into red CWM.
hmm mounting system data?
how do i do that?

jhong91 said:
yes, i flashed bedwa's kernel which got me into red CWM.
hmm mounting system data?
how do i do that?
Click to expand...
Click to collapse
ok i booted into red cwm
and i see
unmount /system
mount /data
and everything else... what should i do? both?

jhong91 said:
ok i booted into red cwm
and i see
unmount /system
mount /data
and everything else... what should i do? both?
Click to expand...
Click to collapse
ok i chose
mount /data
and it still gives me that message
E: Can't mount /dev/block/mmcblk0p2
(File exists)
Error mounting DATA: !

jhong91 said:
ok i chose
mount /data
and it still gives me that message
E: Can't mount /dev/block/mmcblk0p2
(File exists)
Error mounting DATA: !
Click to expand...
Click to collapse
Not to sure there might be a problem with it trying to read the backup/ mounting data. You might just have to reflash the rom you would like to use
Sent from my SGH-I997 using XDA App

LG_iiNsTiiNcT said:
Not to sure there might be a problem with it trying to read the backup/ mounting data. You might just have to reflash the rom you would like to use
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
so,
i flashed infused v2.1.0 because it was the only Rom in my sd card...
all seemed to go well
and when i rebooted after enabling voodoo lagfix (cuz i had it disabled and it went into a boot loop) i heard the robot voice.. it said voodoo is now enabled and now its going to convert data partition.. then it says not enough space? or something like that and it goes in to a boot loop again... AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
should i just ODIN back to root+3e..?
will this erase all my photos? pictures are all i care about... as long as i don't lose them..

jhong91 said:
so,
i flashed infused v2.1.0 because it was the only Rom in my sd card...
all seemed to go well
and when i rebooted after enabling voodoo lagfix (cuz i had it disabled and it went into a boot loop) i heard the robot voice.. it said voodoo is now enabled and now its going to convert data partition.. then it says not enough space? or something like that and it goes in to a boot loop again... AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
should i just ODIN back to root+3e..?
will this erase all my photos? pictures are all i care about... as long as i don't lose them..
Click to expand...
Click to collapse
You won't loose anything on your SD card unless you format it you internal memory should be five aswell
Sent from my SGH-I997 using XDA App

LG_iiNsTiiNcT said:
You won't loose anything on your SD card unless you format it you internal memory should be five aswell
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
ok,
i decided to just keep miui...
i flashed miui all over again..
not happy ..but until i figure out a solution...
i don't want to ODIN back to stock... thanks for your help~

jhong91 said:
ok,
i decided to just keep miui...
i flashed miui all over again..
not happy ..but until i figure out a solution...
i don't want to ODIN back to stock... thanks for your help~
Click to expand...
Click to collapse
If I happen to run into this problem and can deal with it hands on ill let you know or if I find a fix some were else but Odin back to stock shouldn't be bad.
Sent from my SGH-I997 using XDA App

Ran into this problem today when flashing a rom, i had to odin ultimate unbrick and erase all data from within the stock recovery (blue). I then odin-ed community kernel, enabled voodoo, then did red recovery and flashed my custom rom again and the data partiton was working again. I'm not sure what had happened, but i had to ultimate unbrick twice with the pit file.

Bandit_Kaine said:
Ran into this problem today when flashing a rom, i had to odin ultimate unbrick and erase all data from within the stock recovery (blue). I then odin-ed community kernel, enabled voodoo, then did red recovery and flashed my custom rom again and the data partiton was working again. I'm not sure what had happened, but i had to ultimate unbrick twice with the pit file.
Click to expand...
Click to collapse
hey, do you mind if i PM you for more info on ODIN?
i have zero experience with it haha

jhong91 said:
hey, do you mind if i PM you for more info on ODIN?
i have zero experience with it haha
Click to expand...
Click to collapse
Odin back to stock?
Sent from my SGH-I997 using XDA App

LG_iiNsTiiNcT said:
Odin back to stock?
Sent from my SGH-I997 using XDA App
Click to expand...
Click to collapse
yes.. haha which one should I use?? because I see there are three.. gtg has two and h8rift has one..
i want to do the one that puts me back to stock with root + 3e which i think both gtg and h8rift put out...
what exactly does odin back to stock "wipe"?
in gtg's post it says that it wipes data, dbdata, idk.. stuff like that and i have no idea what that means... as long as my pictures and files in my "download" folder are safe i'm good!

I've always lost root with Odin back to stock only erases system files such as apps and everything ur SD card will be fine you'll just have to re-root flash 3e recovery and cwm
Sent from my SGH-I997 using XDA App

Your download folder is on your SD card it will be fine
Sent from my SGH-I997 using XDA App

thanks! =)

Related

issue flashing clockwork on the sidekick 4g

is anyone else having issue on flashing clock work on the sidekick 4g? it keeps saying that it flashed but when i boot into recovery still stock recovery. is there any other way i could flash a rom thanks
david1985 said:
is anyone else having issue on flashing clock work on the sidekick 4g? it keeps saying that it flashed but when i boot into recovery still stock recovery. is there any other way i could flash a rom thanks
Click to expand...
Click to collapse
this question should definitely go in the General section or in the Clockwork Recovery thread, just so you know
if you are in stock recovery, you can get into Clockwork by choosing 'reinstall packages', provided that you have followed the instructions in the CWM thread and: 1) replaced the recovery in system/bin with the modified recovery binary from the thread, and 2) placed the update.zip from the thread on the root of your sdcard.
or u can follow sduvick mod on krylon thread
nice! I didn't know he made a script for flashing CWM.
Can someone tell me why every time I try to flash a new rom on my daughters sk4g in recovery it goes straight to the screen with reinstall packages so I pick it and it errors out and can't go further???
Sent from my Sensation using XDA App
What rom are you flashing, and how are you flashing it?
Sent from my SGH-T839 using xda premium
ksnexusone said:
Can someone tell me why every time I try to flash a new rom on my daughters sk4g in recovery it goes straight to the screen with reinstall packages so I pick it and it errors out and can't go further???
Sent from my Sensation using XDA App
Click to expand...
Click to collapse
You probably need to visit the Recovery CWM thread and either manually replace the recovery in system/bin with the modified one and put the update.zip(clockworkmod) on the root of you sdcard... Or use sduvick's script in the thread to do those 2 things for you. Then when you reinstall packages it will take you to Clockwork Recovery.
I cant get passed the WipeData/factoryreset.
replaced recovery in System/Bin
Update.zip in root of SD.
this is what i get
--Wiping data...
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Formatting /sdcard/.android_secure...
then thats where it freezes then i gotta restore using ODIN.
any help would be greatly appreciated
HECTOR-ZERONI said:
I cant get passed the WipeData/factoryreset.
replaced recovery in System/Bin
Update.zip in root of SD.
this is what i get
--Wiping data...
Formatting /data...
Formatting /cache...
Formatting /sd-ext...
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Formatting /sdcard/.android_secure...
then thats where it freezes then i gotta restore using ODIN.
any help would be greatly appreciated
Click to expand...
Click to collapse
are you wiping data in the blue stock recovery, or in the orange ClockworkMod recovery?
yogi2010 said:
are you wiping data in the blue stock recovery, or in the orange ClockworkMod recovery?
Click to expand...
Click to collapse
In orange CWM
Sent from my SGH-T839 using XDA Premium App
HECTOR-ZERONI said:
In orange CWM
Sent from my SGH-T839 using XDA Premium App
Click to expand...
Click to collapse
hmm, that's weird. and you are getting into orange CWM by doing 'reinstall packages' in the blue stock recovery? if so, I'm not sure why that would be happening...
Yeah I guess I'm S.O.L
Sent from my SGH-T839 using XDA Premium App
Try to odin back to kd1 or kg2, Then use the recovery from krylons thread. This part is important, do not use rom manager to update your recovery, the version on rm is either corrupt or unstable. This happened to me a couple of time when I first tried it too. The problem was rom managers recovery.
Sent from my SGH-T839 using xda premium
Should I completely delete CWM on my SD card then, and then repeat the process on krylons thread?
Sent from my SGH-T839 using XDA Premium App
Yes, do exactly that, delete all cwm files you have on your computer and sdcard, and start all over, using krylons thread.
Ok Just need to confirm this
When I rebooot to recovery. I get the original. screen with two errors. However when I click reinstall packages. It shoots me to CWM. IT does that every time.
Am I safe to Flash? Or did I mess up some where
---------- Post added at 01:45 AM ---------- Previous post was at 01:39 AM ----------
[/COLOR]
david1985 said:
is anyone else having issue on flashing clock work on the sidekick 4g? it keeps saying that it flashed but when i boot into recovery still stock recovery. is there any other way i could flash a rom thanks
Click to expand...
Click to collapse
I am having the same problem with clockworks recovery mod but if I go to recovery from rom maniger app I got from the market it gose right into the clockworks recvery if I use any other app for rcovery it go into stock recovery and thin I have to reinstall pacage and thin it works but that's what I know about it and I fallowed the thread to the letter
if you installed rom manager, then you didnt follow the thread. go to settings/applications/manage applications and under 3rd party, select rom manager. when that comes up, select clear data and uninstall. do NOT reinstall rom manager. next, go to the root of your sd card and look for a folder named clockworkmod. if you find it, delete it. next, go back to the cwm thread and in the first post, look for a link to a file called update.zip. download it and place it on the root of your sd card. to get into cwm, boot into stock recovery and select reinstall packages. you should then boot into cwm. there is no other way to boot into clockworkmod recovery unless you flash a rom that comes with it. the version of clockworkmod that flashes through rom manager does not work right. also, once you have booted into cwm recovery after installing it the proper way, scroll down through your recovery menu and select advanced. then select fix permissions. it will say "fixing permissions...." and will sit for a minute or two. let it sit till it says "done!" then hit the back button and select reboot system now. running fix permissions should stop your random reboots. it did for me. it wont solve the screen lag, but you shouldnt have any more random reboots.
ok i did that. now the cwm do you have to reinstall it evry time you go to recovery or will it stay and the rom manager i got it after i flashed cwm becous it sead it had cwm built in
you have to reinstall packages every time. rom manager isnt gonna do crap for you on this phone. you can flash roms through clockworkmod just fine as long as you do it right, but if you try to start flashing a rom through rom manager, its gonna brick your phone. you can recover from a brick in several ways, but its a pain in the chops.

[Q] Help with Voodoo and installing Infused ROM...

Hi.
I have a Rogers Infuse 4G and I rooted it as was explained by gtg using the Odin Root Kernel and all is fine. I followed the instructions to create the Voodoo folder / disable-lagfix folder before flashing the root kernel and again... the phone rooted perfectly but...
I am now wanting to install the Infused ROM and I followed the instructions starting with step 1. as I am NOT on a CUSTOM ROM and I deleted the Voodoo folder I created and rebooted the phone but when it started it went through the process of ENABLING Voodoo and the folder did NOT delete.
I tried deleting it again and it rebooted but both Astro AND Root Explorer still shows the folder as there and active and I have tried deleting it from both programs so...
How do I get rid of it to flash the Infused ROM or do I even need to? Since it seems to be active and I cant seem to get rid of it can I just skip to step 7 of the ROM install instructions and flash the ROM itself or do I NEED to get rid of this Voodoo folder and start by flashing the other Infused Kernel before I can flash the ROM?
Sorry for being so longwinded but I dont want to brick the phone. Please advise...
Thanks,
Friendly morning bump... Anyone?
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
Hi.
I have a Rogers Infuse 4G and I rooted it as was explained by gtg using the Odin Root Kernel and all is fine. I followed the instructions to create the Voodoo folder / disable-lagfix folder before flashing the root kernel and again... the phone rooted perfectly but...
I am now wanting to install the Infused ROM and I followed the instructions starting with step 1. as I am NOT on a CUSTOM ROM and I deleted the Voodoo folder I created and rebooted the phone but when it started it went through the process of ENABLING Voodoo and the folder did NOT delete.
I tried deleting it again and it rebooted but both Astro AND Root Explorer still shows the folder as there and active and I have tried deleting it from both programs so...
How do I get rid of it to flash the Infused ROM or do I even need to? Since it seems to be active and I cant seem to get rid of it can I just skip to step 7 of the ROM install instructions and flash the ROM itself or do I NEED to get rid of this Voodoo folder and start by flashing the other Infused Kernel before I can flash the ROM?
Sorry for being so longwinded but I dont want to brick the phone. Please advise...
Thanks,
Click to expand...
Click to collapse
All Voodoo kernels include CWM.
Once you've flashed a Voodoo kernel that includes CWM and it's done the Voodoo conversion, just flash Infused from CWM and do a "Wipe Data/Factory Reset" from CWM.
Entropy512 said:
All Voodoo kernels include CWM.
Once you've flashed a Voodoo kernel that includes CWM and it's done the Voodoo conversion, just flash Infused from CWM and do a "Wipe Data/Factory Reset" from CWM.
Click to expand...
Click to collapse
So you're saying that the kernel I used to root my phone is OK to just flash the Infused ROM from?
Even though I have tried to remove the voodoo folder twice (its still there) it is still enabled and I can do this even though I am still on my stock Rogers ROM and not on any custom ROM which is what the instructions say?
Please advise...
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
So you're saying that the kernel I used to root my phone is OK to just flash the Infused ROM from?
Even though I have tried to remove the voodoo folder twice (its still there) it is still enabled and I can do this even though I am still on my stock Rogers ROM and not on any custom ROM which is what the instructions say?
Please advise...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
You usually only have to disable Voodoo Lagfix when moving to a kernel that is missing Lagfix support - which means "bone stock" on our devices as all other kernels support it.
Check gtg's "optional" stuff at the bottom of the root post - http://forum.xda-developers.com/showthread.php?t=1197248
Entropy512 said:
You usually only have to disable Voodoo Lagfix when moving to a kernel that is missing Lagfix support - which means "bone stock" on our devices as all other kernels support it.
Check gtg's "optional" stuff at the bottom of the root post - http://forum.xda-developers.com/showthread.php?t=1197248
Click to expand...
Click to collapse
Thanks again for the help and info but I guess my real question now is... Since I have already tried removing the voodoo lagfix, have I messed anything up that would affect my ability to just go ahead and flash the ROM from CWM?
You said that the Rogers root kernel also has the proper CWM in it right?
If yo0u can advise on these for me then I will give it a go when I get home from work tonight.
Thanks again,
yiannisthegreek said:
Thanks again for the help and info but I guess my real question now is... Since I have already tried removing the voodoo lagfix, have I messed anything up that would affect my ability to just go ahead and flash the ROM from CWM?
You said that the Rogers root kernel also has the proper CWM in it right?
If yo0u can advise on these for me then I will give it a go when I get home from work tonight.
Thanks again,
Click to expand...
Click to collapse
Probably not... Worst case you might need to go into Mounts and Storage and format /system prior to flashing.
And make sure to do Wipe Data/Factory Reset when you flash
Entropy512 said:
Probably not... Worst case you might need to go into Mounts and Storage and format /system prior to flashing.
And make sure to do Wipe Data/Factory Reset when you flash
Click to expand...
Click to collapse
But how will I know IF I may have to go into Mounts and Storage and format /system before I flash? Is there a way to tell if I have to do this?
Someone advised me by PM to go into Root Explorer and press r/w and then delete the folder and it should go away so I can start from step 1 of the instructions but I dont know if that will work either.
yiannisthegreek said:
But how will I know IF I may have to go into Mounts and Storage and format /system before I flash? Is there a way to tell if I have to do this?
Someone advised me by PM to go into Root Explorer and press r/w and then delete the folder and it should go away so I can start from step 1 of the instructions but I dont know if that will work either.
Click to expand...
Click to collapse
Hmm...
Use ADB or Android Terminal Emulator while your phone is running and type
Code:
mount
If it shows ext4 for /system and /data, lagfix is enabled and you should be good to flash.
Entropy512 said:
Hmm...
Use ADB or Android Terminal Emulator while your phone is running and type
Code:
mount
If it shows ext4 for /system and /data, lagfix is enabled and you should be good to flash.
Click to expand...
Click to collapse
OK... I will try the terminal emulator when I get home then as I am not familiar with adb... I did this on my SgsII and typed mount but it gave me a whole page of stuff so I hope its easier on my infuse...
Sent from my GT-I9100 using xda premium
the voodoo folder is created by the voodoo kernel on bootup.
it is the "disable-lagfix" folder or text file (it doesn't matter which as long as it exists) within the /Voodoo folder that disables the lagfix. as long as you have a voodoo kernel you will have a voodoo folder regardless of weather voodoo is enabled or disabled.
also since infused has voodoo it supports both rfs and ext4 and it doesn't matter if voodoo is currently enabled or disabled. the Rom will install just fine. it just takes a while the first time if voodoo installs from rfs. the only exception is if there are errors in the lag fix logs but none of the infuse kernels have ever given me that problem.
the idea of disabling lagfix with the root kernel on rogers is just incase you return to the stock kernel which can't boot the phone on ext4.
Dani897 said:
the voodoo folder is created by the voodoo kernel on bootup.
it is the "disable-lagfix" folder or text file (it doesn't matter which as long as it exists) within the /Voodoo folder that disables the lagfix. as long as you have a voodoo kernel you will have a voodoo folder regardless of weather voodoo is enabled or disabled.
also since infused has voodoo it supports both rfs and ext4 and it doesn't matter if voodoo is currently enabled or disabled. the Rom will install just fine. it just takes a while the first time if voodoo installs from rfs. the only exception is if there are errors in the lag fix logs but none of the infuse kernels have ever given me that problem.
the idea of disabling lagfix with the root kernel on rogers is just incase you return to the stock kernel which can't boot the phone on ext4.
Click to expand...
Click to collapse
OK so I went ahead and tried to install the rom starting from step 7 and I am STUCK in a boot loop or am bricked. All I see is the Samsung logo and nothing else.
How do I get back now and please remember that this is a ROGERS phone so the standard ultimate unbrick wont work as its meant for at&t...
Please help...
EDIT - I CAN get into RED voodoo recovery and am assuming that I should be able to get into download mode as well if I have to..
EDIT 2 - OK so I think I know what I did wrong and it just dawned on me now. First of all I was stupid and did not make a backup of stock DUH!!!
Now what I see I did here is I rooted with the Rogers root kernel which is correct but then I tried to install the Infuse v2 rom over THAT kernel which now I see is listed as ODIN Rogers root Infuse v1 kernel (or something like that) so does that mean I flashed the wrong Tom over the wrong kernel??? If so... can I unbrick it?
Sent from my GT-I9100 using xda premium
WOW!!! Holy SH!T!!! OK so I was able to unbrick it THANK GOD as I found the proper files to do an Odin flash back to stock Rogers firmware.
This flash gave me ROOT but I am now missing the RED CWM recovery so...
Can anyone now tell me where I need to go and what I need to so to PROPERLY install the Infuse v2 rom???
Please and thank you...
All I want is to run a custom rom!!! Why can't this phone be as simple as my old SGS I9000M or my current SGSII I9100. (International version)?
Any advice will be greatly appreciated!!!
Sent from my GT-I9100 using xda premium
I think just go through the steps you did before, but don't mess with the Voodoo folder at all.
1) Flash the CWM/Voodoo/Root kernel
2) Reboot, let it convert partitions (Voodoo Lagfix)
3) Once done, shut down, go into CWM, flash Infused and wipe data
Entropy512 said:
I think just go through the steps you did before, but don't mess with the Voodoo folder at all.
1) Flash the CWM/Voodoo/Root kernel
2) Reboot, let it convert partitions (Voodoo Lagfix)
3) Once done, shut down, go into CWM, flash Infused and wipe data
Click to expand...
Click to collapse
Arrrgh!!! I just don't get it!!! I did everything by the book this time and it STILL BRICKED ON ME!!!
As I said... last night I cleaned it with Odin package and all I had was root... No VOODOO at all so I simply went to the Infused ROM 2.2.3 THREAD and followed all the proper instructions for CWM installation staring right from #1 and for crying out loud IT STILL BRICKED!!! What am I doing wrong???
Do I need to have an external sd card inserted or my sim card for this to work because I don't at the moment...
Well back to Odin I go to unbrick again... I just don't get it!!! :-(
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
Arrrgh!!! I just don't get it!!! I did everything by the book this time and it STILL BRICKED ON ME!!!
As I said... last night I cleaned it with Odin package and all I had was root... No VOODOO at all so I simply went to the Infused ROM 2.2.3 THREAD and followed all the proper instructions for CWM installation staring right from #1 and for crying out loud IT STILL BRICKED!!! What am I doing wrong???
Do I need to have an external sd card inserted or my sim card for this to work because I don't at the moment...
Well back to Odin I go to unbrick again... I just don't get it!!! :-(
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
did yoy wipe data/factory reset before you flashed? you should try that.
also the first boot takes a long time. you should hear robot voices (seriously) as It converts. but if that causes you trouble then let the root kernel do the voodoo conversion. don't delete anything and don't remove the root kernel. just use it to flash.
if you still have trouble then start over. create a sub folder in the Voodoo folder (the V is capitalized) called "disable-lagfix" all lowercase no quotations. and don't enable lagfix till after the new Rom is installed.
Hi.
I think I did all this... when I started the second time I was only rooted with no voodoo.
I followed the instructions and flashed the infuse v2 CWM kernel with sgs kernel flasher and rebooted the device like the instructions said to do and voodoo enabled itself. (What I did notice is that even after I flashed this kernel and voodoo enabled itself that when I went to about phone it still showed the same code for the stock kernel (it diddnt say it was different) if that matters).
I then downloaded the ROM zip Infuse 2.2.3 full and placed it on the root of my internal sd card and then powered off the phone, went to RED CWM recovery (voodoo recovery) and flashed the ROM. Then I immediately wiped the data and rebooted as per the instructions and all it does is show me the Rogers splash screen for 2 seconds and then sits on the word Samsung forever.
How long does it take to boot past the word Samsung? Could I just not be letting it boot fully and assuming that its bricked?
Sent from my GT-I9100 using xda premium
you shouldn't be having a problem unless the Rom was a bad download. try downloading again.
also, if it fails again put the disable-lagfix file/folder in the Voodoo folder as a last resort and don't enable the lag fix till after the first boot with infused is successful.
Dani897 said:
you shouldn't be having a problem unless the Rom was a bad download. try downloading again.
also, if it fails again put the disable-lagfix file/folder in the Voodoo folder as a last resort and don't enable the lag fix till after the first boot with infused is successful.
Click to expand...
Click to collapse
You know that I'm coming from stock gingerbread on a Rogers Infuse device... right? I'm not sure that matters at this point but I thought I'd mention it just in case.
Again... does it matter that I'm flashing the ROM without an external sd card inserted and with no sim card in it? Just want to have all my bases covered...
Sent from my GT-I9100 using xda premium
yiannisthegreek said:
You know that I'm coming from stock gingerbread on a Rogers Infuse device... right? I'm not sure that matters at this point but I thought I'd mention it just in case.
Again... does it matter that I'm flashing the ROM without an external sd card inserted and with no sim card in it? Just want to have all my bases covered...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Shouldn't, but might... I've never removed my SD or SIM.

When doing a restore...

I get an error when doing a restore in cwm. It says "failed to unmount system" any thoughts?
Sent from my SGH-T959V using XDA App
Check mounts maybe?
I have the exact same problem using CWM. Even attempting to mess with the /system mount from the mounts menu gives the same error.
I think I read about that problem elsewhere & it was said it was a problem with CWM & GB. I'm not 100%, though.
Try this.
Remove the voodoo directory from your sdcard and reboot to convert back to rfs. Boot all the way into Android.
Reboot to recovery and do a full backup (if you dont already have one). Dont reboot yet!
Install the rfs_format.zip from drhonks Bali 3.3 thread (that you saved to your sdcard before doing this). Dont reboot yet!
Recover from the backup you just made. Dont reboot yet.
Enable lagfix and /system lagfix
Now Reboot.
This will cleanly format your partitions to make sure ext4 lagfix is enabled correctly, without loosing your current install.
Sent from my SGH-T959V using xda premium
You have to flash Bali kernel.reboot to recovery., restore backup. Flash bk GB kernel.
Sent from my SGH-T959V using Tapatalk
Somairotevoli said:
You have to flash Bali kernel.reboot to recovery., restore backup. Flash bk GB kernel.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
Why flash bali?
Because you won't be able to mount system otherwise.
Sent from my SGH-T959V using Tapatalk
Will we eventually find a way to perform nandroid restores without going through this arduous process?
Somairotevoli said:
Because you won't be able to mount system otherwise.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
I still don't see how that makes sense. My kj6 kernel, drhonk's kernels (for gb, with cmw+voodoo) can both mount /system...
I don't see what flashing bali will do differently then current kernel.
If there is some specific init code, or kernel changes that make bali fix mounting /system in these kinds of cases (where maybe the system partition is corrupted, or continues to fail it's own internal filesystem checks... that we don't see because we don't have source for fsr or rfs...) ...would be super helpful.
This is the only way to do a full restore.there is a bug with the cwm GB voodoo kernel. This is the work around. Search the forums, this had been explained many times.
Sent from my SGH-T959V using Tapatalk
I agree, on GB roms I always flash the Bali 3.3 kernel to do a full restore then flash back to a GB kernel before rebooting.
Only hitch is i dont have acces to a pc for odin atm...
Sent from my SGH-T959V using XDA App
Somairotevoli said:
This is the only way to do a full restore.there is a bug with the cwm GB voodoo kernel. This is the work around. Search the forums, this had been explained many times.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
Interesting. Yea, will search!
Lets see if we can fix this problem? Eh?
If we can, I'll wrap it into v0.1.0 beta3.
You don't need Odin to do this, just CWM flashables of the kernels.
Hi Guys
I apologize in advance, I did not understand what Bhundven wrote.
I don't mind flashing Bali kernel, just let it work...
can someone please state (already tested) steps for a dummy (like me) to understand.
Thanks!
1. Boot to CWM recovery
2. Flash the Bali kernel
3. Reboot recovery
4. Do your full restore
5. Flash GB kernel
6. Reboot System
Hopefully that's a good enough description, as I am not very good at giving instructions.
Please ask for better directions if you don't understand these.
Not responsible for damages, but this works for me. If you reboot system with Bali kernel you will bootloop, even if this happens you should be able to do 3 button salute to get back to CWM recovery.
I havent done the button combos in eons... Allways use quick boot/power menu... What are those before i attempt this?
Sent from my SGH-T959V using XDA App
Power + volume up and down when Galaxy S 4g screen comes up let go of power button but continue holding the volume buttons (may take a little bit but keep holding the buttons).

[Q] Please Help this Noob

So in an attempt to completely restore my phone I did something stupid. I went into CWM> mounts and storage > Then did format /cache, format /data, format /sdcard, and format /system. afterwards My phone was stuck in never ending reboot so I tried flashing the stock g2x rom and I kept getting an "Installation Aborted" error. What can I do? All help is appreciated.
what stock rom were you flashing? a backup you made yourself (before you flashed a new rom) or one that you downloaded somewhere?
It was one i downloaded
Just mount USB and copy over a rom, you can't use your phone until then lol.
Sent from my LG-P999 using xda premium
mt3g said:
Just mount USB and copy over a rom, you can't use your phone until then lol.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I've already tried that. After I formated everything I downloaded the stock g2x rom and put it on my SD card
Wait what? You formatted it again after placing a rom on it? Just download a rom from a PC and mount sdcard while plugged in to computer copy rom over and unmount then flash rom.
Sent from my LG-P999 using xda premium
mt3g said:
Wait what? You formatted it again after placing a rom on it? Just download a rom from a PC and mount sdcard while plugged in to computer copy rom over and unmount then flash rom.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I'm stilling getting "installation aborted".
After I did all the formatting crap I talked about, my phone wouldn't boot so I put my SD card in my computer and put the stock G2X rom on there. When I tried to flash it i got the installation aborted error
Never heard of it or seen the issue is the rom a normal size? Possibly have to reflash CWM.
Sent from my LG-P999 using xda premium
Yea, try re-flashing CWM and trying a different ROM, I've gotten that error when the install script wasn't written correctly.
I know this is incredibly noobish but...how do I reflash CWM?
The same way you flashed just repeat the steps.
Sent from my LG-P999 using xda premium
http://forum.xda-developers.com/showthread.php?t=1056847
(link is dead for OneClick Recovery)
Get em here http://androiddepot.netai.net

[Q] Need some help on flashing

Hey guys i need some help
i am using galaxy fit with gingerbread 2.3.4 kernel xxkpg. I tried to install one rom through recovery mode, since im new to this flashing thing i thought i did it properly but when i rebooted after installationg my screen went black with words "android" in middle it wont boot stuck there then i tried again noticed i got this msg when i tried to format
e: format_volume: rfs format failed on/ dev/st113
formating/ cache...
e:format_volume:rfs format failed on/ dev/st114
Data Wipe complete
this is the rom i tried to install [ROM][CM7.2]CoolFit By Adwait|Beauty+Fast+Stable+Battery
I am not sure what to do next. did i brick my phone ?
thanks
found it guys. now updated to gingerbread 2.3.7 cynogenmod 7.2. now my phone back to normal :cyclops:
okay -_-
where did you go wrong anyway?
Harryhades said:
okay -_-
where did you go wrong anyway?
Click to expand...
Click to collapse
I didnt install cwm recovery properly thats y it showed error when i tried to format. once i installed it using odin then everything went fine, found a ginger bread 2.3.7 cyanogenmod 7.2 from another site installed that it worked perfectly got all my data back even my old home screen wall paper now i found the problem, think im gonna experiment with few roms
cheers mate thanks
try to flashing again with gingerbread 2.3.6
i got the error
i just installed cwn recovery using odin..and got the same error as you experienced..can you tell me how to get over it?
best wishes
irfanbakri said:
i just installed cwn recovery using odin..and got the same error as you experienced..can you tell me how to get over it?
best wishes
Click to expand...
Click to collapse
Have you wiped data?
- Via xda premium
irfanbakri said:
i just installed cwn recovery using odin..and got the same error as you experienced..can you tell me how to get over it?
best wishes
Click to expand...
Click to collapse
To remove any sort of further errors, I think you should reinstall stock firmware and then try CWM again.
Sent from my GT-S5670 using xda premium
solved!
Galaxy_Rohit said:
To remove any sort of further errors, I think you should reinstall stock firmware and then try CWM again.
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
a.cid said:
Have you wiped data?
- Via xda premium
Click to expand...
Click to collapse
it is simple i think..
1)just boot into recovery..
2) enter mount and storage option
3 and format all the options..
/cache
/data
/system
/sd-ext
4) reboot recovery..and...
done!..flash new rom as you wish..

Categories

Resources