Could i install DFT Freedom ROM ( Gold_DFT_7720) ? I mean just run .exe file of custom rom .
I have now:
7.10.7720.68
2250.21.30201.401
When i am opening boot loader it's giving me:
at the top: Security Unlocked
PC92100 SS-BC (4K)
SPL-3.2.2250.0(129185) MNG
MicroP (LED) 0x86
SD SANDISC 7580MB
Partition Info-v211v413
you must first change SPL to HSPL
what does it mean in bootloader : Security Unlocked
what does it mean in bootloader : Security Unlocked
Click to expand...
Click to collapse
I don't know but you can check this. If you can downgrade SPL to v. 1.22: http://forum.xda-developers.com/showthread.php?t=1279905 it's ok but if you can't that mean so your bootloader is locked.
sky1742 said:
what does it mean in bootloader : Security Unlocked
Click to expand...
Click to collapse
mean: you can change SPL to HSPL if version of SPL supported by DFT tool
Related
Hy !
I've CID unlocked my SPV M600, now I want to say what ROM can I install ?
Every ?
Can I upgrade my IPL and SPL?
What are limitations?
thank for your help
regards
Use wiki ... no G4 CID Unlook for free!
If CID is free ... you can Flash all.
NetrunnerAT said:
Use wiki ... no G4 CID Unlook for free!
If CID is free ... you can Flash all.
Click to expand...
Click to collapse
I say that, I've payed for that but in the wiki I don't see more information about ROM upgrade.
What I want :
- to dump my actual ROM (complete with IPL, SPL, Radio, System, personnal data etc...)
- to flash new ROM with new IPL/SPL etc...
- to can back to my first dumped ROM.
thx
You can flash all ... IPL/SPL Updates are only Updates ... you can Flash a higher number but go back isnt possible.
NetrunnerAT said:
You can flash all ... IPL/SPL Updates are only Updates ... you can Flash a higher number but go back isnt possible.
Click to expand...
Click to collapse
ok, thank you !
Moderators can lock this topic
How do I know if I have a locked or unlocked CID ?
How do I know if I have a locked or unlocked CID in my S200?
i flash my jamin with w6 and now it stopped in bootloader and have the following IPL 1.000
SPL 2.20.0001
and not i can not install any rom whatever original or cooked only i have bootloader screen i think i bricked my phone for urgent help
all_brother2002 said:
i flash my jamin with w6 and now it stopped in bootloader and have the following IPL 1.000
SPL 2.20.0001
and not i can not install any rom whatever original or cooked only i have bootloader screen i think i bricked my phone for urgent help
Click to expand...
Click to collapse
here is the answer:
http://forum.xda-developers.com/showthread.php?p=1403251#post1403251
Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
devilmaycry5 said:
Hey guys,
I am using a t-mobile MDA vario. I finally cid unlocked my wizard using WST 3. now my IPL/SPL is 1.05. now if I try to flash with T-mobile 2.26 shipped rom. It gives Invalid vendor id error. What to do now? How to update my IPL/SPL ??
Please help me.
Click to expand...
Click to collapse
Your phone is still not CID unlocked.
There is no WST 3 as yet,the only WST tool by mestrini available at present is WST version 4.2.1 and you can download it from this link:-
http://forum.xda-developers.com/showthread.php?t=329170
download and run the tool ,specially the 'CID Action' button and post the report generated to verify the CID locked/unlocked status,SIM and CID unlock are entirely different.it may be SIM unlocked but you cannot CID unlock with WST,it has to be done with lokiwiz02b method.To understand the method of unlocking read and fully understand the guide posted here:-
http://forum.xda-developers.com/showthread.php?t=285435
I think you have to followed the guide correctly,after flashing button's rom 1.05,when ipl/spl 1.05 is achieved,than you have to use lokiwiz02b to cid unlock.after that it's recommended to upgrade to T-mobile 2.26 to have ipl/spl 2.26.good luck
beause my 818pro G3 just show the bootloader screen,can't boot in os.
when power on,show.
ipl 2.20
spl 1.00.0000
os 2.20.7.34
how can i update the spl to 2.xx.xxxx
fro9let said:
beause my 818pro G3 just show the bootloader screen,can't boot in os.
when power on,show.
ipl 2.20
spl 1.00.0000
os 2.20.7.34
how can i update the spl to 2.xx.xxxx
Click to expand...
Click to collapse
Flash this one
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
then you will get what you want ( WM5 rom with SPL 2.xx), then you may upgrade to wm6 easily
dioxda2 said:
Flash this one
http://www.4shared.com/file/57952591/3955ed98/NVID_RUU.html?dirPwdVerified=2948f2e
then you will get what you want ( WM5 rom with SPL 2.xx), then you may upgrade to wm6 easily
Click to expand...
Click to collapse
Hi, dioxda
thank you!
Hi
I update that rom, but still show the bootloader, can't boot in os.
show:
IPL 2.20
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
Qtek
fro9let said:
Hi
I update that rom, but still show the bootloader, can't boot in os.
show:
IPL 2.20
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
Qtek
Click to expand...
Click to collapse
flash 1d, go to my lazt too thread @ my signature..
FORCE BOOTLOADER MANUALLY.....................
fro9let said:
Hi
I update that rom, but still show the bootloader, can't boot in os.
show:
IPL 2.20
SPL 2.20.0000
GSM 02.47.21
OS 2.20.7.34
Qtek
Click to expand...
Click to collapse
YOU NEED FLASH THE HARDSPL
OR
flash 1d, go to my lazt too thread @ my signature..
FORCE BOOTLOADER MANUALLY.....................
good news
My problem is solved,
Hi, dioxda2
Thank you very much.
haha, I love you
I have done a HSPL on my elfin.
IN the bootloader also it shows spl:3.10.cmon
So does this say that i can flash any ROM into it or do i need to check whether CID is unlocked ??